Commit 531d3067 authored by Will Deacon's avatar Will Deacon

arm64: defconfig: updates for 4.5

Based on requests, update our defconfig so that:

  - We don't build any modules
  - PL031 is enabled (RTC emulated by qemu)
  - Xen guest support is enabled
  - The Uniphier built-in I2C controller is enabled
  - PCI host controller drivers for the various arm64 SoCs are enabled
  - Device passthrough works on Seattle using SMMU and VFIO
  - The Hisilicon IRQ controller (mbigen) is enabled
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
parent 67dfa175
......@@ -16,7 +16,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
......@@ -37,15 +36,13 @@ CONFIG_ARCH_EXYNOS7=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_R8A7795=y
CONFIG_ARCH_STRATIX10=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_SPRD=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_UNIPHIER=y
......@@ -54,14 +51,19 @@ CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_IOV=y
CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_SMP=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_CMA=y
CONFIG_XEN=y
CONFIG_CMDLINE="console=ttyAMA0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
......@@ -100,7 +102,11 @@ CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_VIRTIO_NET=y
CONFIG_AMD_XGBE=y
CONFIG_NET_XGENE=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_SKY2=y
CONFIG_RAVB=y
CONFIG_SMC91X=y
......@@ -117,25 +123,23 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_UNIPHIER=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=11
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_QUP=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
......@@ -176,8 +180,6 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SPI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
......@@ -187,28 +189,33 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_DMADEVICES=y
CONFIG_RCAR_DMAC=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_RCAR_DMAC=y
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8916=y
CONFIG_HWSPINLOCK_QCOM=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_ARM_SMMU=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_HISILICON_IRQ_MBIGEN=y
CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
......@@ -239,6 +246,7 @@ CONFIG_LOCKUP_DETECTOR=y
# CONFIG_FTRACE is not set
CONFIG_MEMTEST=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment