sched/rq_clock: Consolidate the ordering of the rq_clock methods

update_rq_clock_task() and update_rq_clock() we unnecessarily
spread across core.c, requiring an extra prototype line.

Move them next to each other and in the proper order.

Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

kernel/sched/core.c

@@ -73,27 +73,6 @@
 DEFINE_MUTEX(sched_domains_mutex);
 DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
 
-static void update_rq_clock_task(struct rq *rq, s64 delta);
-
-void update_rq_clock(struct rq *rq)
-{
-	s64 delta;
-
-	lockdep_assert_held(&rq->lock);
-
-	if (rq->clock_update_flags & RQCF_ACT_SKIP)
-		return;
-
-#ifdef CONFIG_SCHED_DEBUG
-	rq->clock_update_flags |= RQCF_UPDATED;
-#endif
-	delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
-	if (delta < 0)
-		return;
-	rq->clock += delta;
-	update_rq_clock_task(rq, delta);
-}
-
 /*
  * Debugging: various feature bits
  */
@@ -218,6 +197,84 @@ struct rq *task_rq_lock(struct task_struct *p, struct rq_flags *rf)
 	}
 }
 
+/*
+ * RQ-clock updating methods:
+ */
+
+static void update_rq_clock_task(struct rq *rq, s64 delta)
+{
+/*
+ * In theory, the compile should just see 0 here, and optimize out the call
+ * to sched_rt_avg_update. But I don't trust it...
+ */
+#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+	s64 steal = 0, irq_delta = 0;
+#endif
+#ifdef CONFIG_IRQ_TIME_ACCOUNTING
+	irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
+
+	/*
+	 * Since irq_time is only updated on {soft,}irq_exit, we might run into
+	 * this case when a previous update_rq_clock() happened inside a
+	 * {soft,}irq region.
+	 *
+	 * When this happens, we stop ->clock_task and only update the
+	 * prev_irq_time stamp to account for the part that fit, so that a next
+	 * update will consume the rest. This ensures ->clock_task is
+	 * monotonic.
+	 *
+	 * It does however cause some slight miss-attribution of {soft,}irq
+	 * time, a more accurate solution would be to update the irq_time using
+	 * the current rq->clock timestamp, except that would require using
+	 * atomic ops.
+	 */
+	if (irq_delta > delta)
+		irq_delta = delta;
+
+	rq->prev_irq_time += irq_delta;
+	delta -= irq_delta;
+#endif
+#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
+	if (static_key_false((&paravirt_steal_rq_enabled))) {
+		steal = paravirt_steal_clock(cpu_of(rq));
+		steal -= rq->prev_steal_time_rq;
+
+		if (unlikely(steal > delta))
+			steal = delta;
+
+		rq->prev_steal_time_rq += steal;
+		delta -= steal;
+	}
+#endif
+
+	rq->clock_task += delta;
+
+#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+	if ((irq_delta + steal) && sched_feat(NONTASK_CAPACITY))
+		sched_rt_avg_update(rq, irq_delta + steal);
+#endif
+}
+
+void update_rq_clock(struct rq *rq)
+{
+	s64 delta;
+
+	lockdep_assert_held(&rq->lock);
+
+	if (rq->clock_update_flags & RQCF_ACT_SKIP)
+		return;
+
+#ifdef CONFIG_SCHED_DEBUG
+	rq->clock_update_flags |= RQCF_UPDATED;
+#endif
+	delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
+	if (delta < 0)
+		return;
+	rq->clock += delta;
+	update_rq_clock_task(rq, delta);
+}
+
+
 #ifdef CONFIG_SCHED_HRTICK
 /*
  * Use HR-timers to deliver accurate preemption points.
@@ -767,60 +824,6 @@ void deactivate_task(struct rq *rq, struct task_struct *p, int flags)
 	dequeue_task(rq, p, flags);
 }
 
-static void update_rq_clock_task(struct rq *rq, s64 delta)
-{
-/*
- * In theory, the compile should just see 0 here, and optimize out the call
- * to sched_rt_avg_update. But I don't trust it...
- */
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
-	s64 steal = 0, irq_delta = 0;
-#endif
-#ifdef CONFIG_IRQ_TIME_ACCOUNTING
-	irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
-
-	/*
-	 * Since irq_time is only updated on {soft,}irq_exit, we might run into
-	 * this case when a previous update_rq_clock() happened inside a
-	 * {soft,}irq region.
-	 *
-	 * When this happens, we stop ->clock_task and only update the
-	 * prev_irq_time stamp to account for the part that fit, so that a next
-	 * update will consume the rest. This ensures ->clock_task is
-	 * monotonic.
-	 *
-	 * It does however cause some slight miss-attribution of {soft,}irq
-	 * time, a more accurate solution would be to update the irq_time using
-	 * the current rq->clock timestamp, except that would require using
-	 * atomic ops.
-	 */
-	if (irq_delta > delta)
-		irq_delta = delta;
-
-	rq->prev_irq_time += irq_delta;
-	delta -= irq_delta;
-#endif
-#ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING
-	if (static_key_false((&paravirt_steal_rq_enabled))) {
-		steal = paravirt_steal_clock(cpu_of(rq));
-		steal -= rq->prev_steal_time_rq;
-
-		if (unlikely(steal > delta))
-			steal = delta;
-
-		rq->prev_steal_time_rq += steal;
-		delta -= steal;
-	}
-#endif
-
-	rq->clock_task += delta;
-
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
-	if ((irq_delta + steal) && sched_feat(NONTASK_CAPACITY))
-		sched_rt_avg_update(rq, irq_delta + steal);
-#endif
-}
-
 void sched_set_stop_task(int cpu, struct task_struct *stop)
 {
 	struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };