Commit 536b3a7a authored by Luis R. Rodriguez's avatar Luis R. Rodriguez Committed by John W. Linville

ath9k: rename ath_beaconq_setup() to ath9k_hw_beaconq_setup()

And move it to hw code on mac.c where it belongs.
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent bd96d390
......@@ -421,7 +421,6 @@ struct ath_beacon {
void ath_beacon_tasklet(unsigned long data);
void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif);
int ath_beaconq_setup(struct ath_hw *ah);
int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif);
void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp);
......
......@@ -242,18 +242,6 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc,
sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
}
int ath_beaconq_setup(struct ath_hw *ah)
{
struct ath9k_tx_queue_info qi;
memset(&qi, 0, sizeof(qi));
qi.tqi_aifs = 1;
qi.tqi_cwmin = 0;
qi.tqi_cwmax = 0;
/* NB: don't enable any interrupts */
return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
}
int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
{
struct ath_softc *sc = aphy->sc;
......
......@@ -1018,3 +1018,16 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah)
#undef AH_RX_STOP_DMA_TIMEOUT
}
EXPORT_SYMBOL(ath9k_hw_stopdmarecv);
int ath9k_hw_beaconq_setup(struct ath_hw *ah)
{
struct ath9k_tx_queue_info qi;
memset(&qi, 0, sizeof(qi));
qi.tqi_aifs = 1;
qi.tqi_cwmin = 0;
qi.tqi_cwmax = 0;
/* NB: don't enable any interrupts */
return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
}
EXPORT_SYMBOL(ath9k_hw_beaconq_setup);
......@@ -667,5 +667,6 @@ void ath9k_hw_rxena(struct ath_hw *ah);
void ath9k_hw_startpcureceive(struct ath_hw *ah);
void ath9k_hw_stoppcurecv(struct ath_hw *ah);
bool ath9k_hw_stopdmarecv(struct ath_hw *ah);
int ath9k_hw_beaconq_setup(struct ath_hw *ah);
#endif /* MAC_H */
......@@ -1709,7 +1709,7 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
* priority. Note that the hal handles reseting
* these queues at the needed time.
*/
sc->beacon.beaconq = ath_beaconq_setup(ah);
sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
if (sc->beacon.beaconq == -1) {
ath_print(common, ATH_DBG_FATAL,
"Unable to setup a beacon xmit queue\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment