Commit 53eb2fbe authored by Jesse Barnes's avatar Jesse Barnes Committed by Jesse Barnes

Merge branch 'suspend' of...

Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next
parents 8344b568 0e6859d4
......@@ -3658,13 +3658,6 @@ M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
SIS 5513 IDE CONTROLLER DRIVER
P: Lionel Bouton
M: Lionel.Bouton@inet6.fr
W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
W: http://gyver.homeip.net/sis5513/index.html
S: Maintained
SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
......
......@@ -304,6 +304,7 @@ config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_VMEMMAP_ENABLE
select SPARSEMEM_VMEMMAP
select SPARSEMEM_STATIC if !64BIT
config ARCH_SPARSEMEM_DEFAULT
def_bool y
......
......@@ -711,7 +711,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
memset(sf, 0, sizeof(struct stack_frame));
sf->gprs[9] = (unsigned long) sf;
cpu_lowcore->save_area[15] = (unsigned long) sf;
__ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15);
__ctl_store(cpu_lowcore->cregs_save_area, 0, 15);
asm volatile(
" stam 0,15,0(%0)"
: : "a" (&cpu_lowcore->access_regs_save_area) : "memory");
......
......@@ -236,7 +236,7 @@ static int insert_memory_segment(struct memory_segment *seg)
{
struct memory_segment *tmp;
if (seg->start + seg->size >= VMEM_MAX_PHYS ||
if (seg->start + seg->size > VMEM_MAX_PHYS ||
seg->start + seg->size < seg->start)
return -ERANGE;
......
......@@ -62,8 +62,6 @@ static u32 acpi_suspend_states[] = {
[PM_SUSPEND_MAX] = ACPI_STATE_S5
};
static int init_8259A_after_S1;
/**
* acpi_suspend_begin - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
......@@ -186,13 +184,6 @@ static void acpi_suspend_finish(void)
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
printk("Broken toshiba laptop -> kicking interrupts\n");
init_8259A(0);
}
#endif
}
/**
......@@ -232,26 +223,6 @@ static struct platform_suspend_ops acpi_suspend_ops = {
.finish = acpi_suspend_finish,
.end = acpi_suspend_end,
};
/*
* Toshiba fails to preserve interrupts over S1, reinitialization
* of 8259 is needed after S1 resume.
*/
static int __init init_ints_after_s1(const struct dmi_system_id *d)
{
printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
init_8259A_after_S1 = 1;
return 0;
}
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_ints_after_s1,
.ident = "Toshiba Satellite 4030cdt",
.matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
},
{},
};
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
......@@ -369,8 +340,8 @@ int acpi_suspend(u32 acpi_state)
/**
* acpi_pm_device_sleep_state - return preferred power state of ACPI device
* in the system sleep state given by %acpi_target_sleep_state
* @dev: device to examine
* @wake: if set, the device should be able to wake up the system
* @dev: device to examine; its driver model wakeup flags control
* whether it should be able to wake up the system
* @d_min_p: used to store the upper limit of allowed states range
* Return value: preferred power state of the device on success, -ENODEV on
* failure (ie. if there's no 'struct acpi_device' for @dev)
......@@ -388,7 +359,7 @@ int acpi_suspend(u32 acpi_state)
* via @wake.
*/
int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
......@@ -427,7 +398,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
(wake && adev->wakeup.state.enabled &&
(device_may_wakeup(dev) && adev->wakeup.state.enabled &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
acpi_status status;
......@@ -473,8 +444,6 @@ int __init acpi_sleep_init(void)
u8 type_a, type_b;
#ifdef CONFIG_SUSPEND
int i = 0;
dmi_check_system(acpisleep_dmi_table);
#endif
if (acpi_disabled)
......
......@@ -1028,6 +1028,7 @@ endif
config BLK_DEV_HD_ONLY
bool "Old hard disk (MFM/RLL/IDE) driver"
depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
help
There are two drivers for MFM/RLL/IDE hard disks. Most people use
the newer enhanced driver, but this old one is still around for two
......
......@@ -42,6 +42,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq)
hw.io_ports.ctl_addr = aux + (6 * 0x20);
hw.irq = irq;
hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif == NULL)
......
......@@ -49,6 +49,7 @@ static int __init ide_arm_init(void)
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = IDE_ARM_IRQ;
hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
......
......@@ -409,9 +409,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
ide_device_add(idx, &palm_bk3710_port_info);
if (!hwif->present)
goto out;
return 0;
out:
printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
......
......@@ -125,6 +125,7 @@ static int __init ide_generic_init(void)
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
hw.irq = ide_default_irq(io_addr);
hw.chipset = ide_generic;
ide_init_port_hw(hwif, &hw);
idx[i] = i;
......
......@@ -55,6 +55,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = pnp_irq(dev, 0);
hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
......
......@@ -1333,8 +1333,7 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
const struct ide_port_info *d)
{
if (d->chipset != ide_etrax100)
hwif->channel = port;
hwif->channel = port;
if (d->chipset)
hwif->chipset = d->chipset;
......@@ -1519,7 +1518,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
continue;
}
if (d->chipset != ide_etrax100 && (i & 1) && mate) {
if ((i & 1) && mate) {
hwif->mate = mate;
mate->mate = hwif;
}
......@@ -1665,6 +1664,7 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no,
ide_std_init_ports(hw, base, ctl);
hw->irq = irq;
hw->chipset = d->chipset;
hwif = ide_find_port_slot(d);
if (hwif) {
......
......@@ -63,7 +63,6 @@ static int proc_ide_read_imodel
case ide_pmac: name = "mac-io"; break;
case ide_au1xxx: name = "au1xxx"; break;
case ide_palm3710: name = "palm3710"; break;
case ide_etrax100: name = "etrax100"; break;
case ide_acorn: name = "acorn"; break;
default: name = "(unknown)"; break;
}
......
......@@ -138,6 +138,8 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
hw->chipset = ide_generic;
}
/*
......
......@@ -81,6 +81,8 @@ static void __init falconide_setup_ports(hw_regs_t *hw)
hw->irq = IRQ_MFP_IDE;
hw->ack_intr = NULL;
hw->chipset = ide_generic;
}
/*
......
......@@ -16,6 +16,7 @@
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
#include <linux/module.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
......@@ -62,7 +63,10 @@
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
#define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000)
int ide_doubler = 0; /* support IDE doublers? */
EXPORT_SYMBOL_GPL(ide_doubler);
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
......@@ -112,6 +116,8 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
hw->chipset = ide_generic;
}
/*
......
......@@ -78,6 +78,8 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = irq;
hw->ack_intr = ack_intr;
hw->chipset = ide_generic;
}
static const char *mac_ide_name[] =
......
......@@ -70,6 +70,8 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
hw->irq = irq;
hw->ack_intr = ack_intr;
hw->chipset = ide_generic;
}
static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
......
......@@ -747,9 +747,11 @@ static int __init cmd640x_init(void)
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
hw[0].chipset = ide_cmd640;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
hw[1].chipset = ide_cmd640;
printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
"\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
......
......@@ -47,13 +47,18 @@ static const struct ide_port_ops delkin_cb_port_ops = {
.quirkproc = ide_undecoded_slave,
};
static const struct ide_port_info delkin_cb_port_info = {
.port_ops = &delkin_cb_port_ops,
.host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
IDE_HFLAG_NO_DMA,
};
static int __devinit
delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned long base;
hw_regs_t hw;
ide_hwif_t *hwif = NULL;
ide_drive_t *drive;
int i, rc;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
......@@ -79,6 +84,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
hw.irq = dev->irq;
hw.dev = &dev->dev;
hw.chipset = ide_pci; /* this enables IRQ sharing */
hwif = ide_find_port();
......@@ -89,26 +95,16 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
hwif->port_ops = &delkin_cb_port_ops;
idx[0] = i;
ide_device_add(idx, NULL);
if (!hwif->present)
goto out_disable;
ide_device_add(idx, &delkin_cb_port_info);
pci_set_drvdata(dev, hwif);
hwif->dev = &dev->dev;
drive = &hwif->drives[0];
if (drive->present) {
drive->io_32bit = 1;
drive->unmask = 1;
}
return 0;
out_disable:
printk(KERN_ERR "delkin_cb: no IDE devices found\n");
pci_release_regions(dev);
pci_disable_device(dev);
return -ENODEV;
......@@ -139,14 +135,12 @@ static struct pci_driver driver = {
.remove = delkin_cb_remove,
};
static int
delkin_cb_init (void)
static int __init delkin_cb_init(void)
{
return pci_register_driver(&driver);
}
static void
delkin_cb_exit (void)
static void __exit delkin_cb_exit(void)
{
pci_unregister_driver(&driver);
}
......
......@@ -569,6 +569,11 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi
{
struct ide_port_info d = sis5513_chipset;
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
int rc;
rc = pci_enable_device(dev);
if (rc)
return rc;
if (sis_find_family(dev) == 0)
return -ENOTSUPP;
......
......@@ -303,6 +303,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
#endif /* CONFIG_IDE_8xx_PCCARD */
hw->chipset = ide_generic;
return 0;
}
#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
......@@ -377,6 +379,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
(0x80000000 >> ioport_dsc[data_port].irq);
hw->chipset = ide_generic;
return 0;
}
#endif /* CONFIG_IDE_8xx_DIRECT */
......
......@@ -239,13 +239,11 @@ EXPORT_SYMBOL(pci_osc_control_set);
* choose highest power _SxD or any lower power
*/
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev,
pm_message_t state)
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
{
int acpi_state;
acpi_state = acpi_pm_device_sleep_state(&pdev->dev,
device_may_wakeup(&pdev->dev), NULL);
acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL);
if (acpi_state < 0)
return PCI_POWER_ERROR;
......
......@@ -506,7 +506,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev);
/**
* pci_choose_state - Choose the power state of a PCI device
......@@ -526,7 +526,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
return PCI_D0;
if (platform_pci_choose_state) {
ret = platform_pci_choose_state(dev, state);
ret = platform_pci_choose_state(dev);
if (ret != PCI_POWER_ERROR)
return ret;
}
......
......@@ -6,8 +6,7 @@ extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
extern void pci_cleanup_rom(struct pci_dev *dev);
/* Firmware callbacks */
extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev,
pm_message_t state);
extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev);
extern int (*platform_pci_set_power_state)(struct pci_dev *dev,
pci_power_t state);
......
......@@ -117,9 +117,7 @@ static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
{
int power_state;
power_state = acpi_pm_device_sleep_state(&dev->dev,
device_may_wakeup(&dev->dev),
NULL);
power_state = acpi_pm_device_sleep_state(&dev->dev, NULL);
if (power_state < 0)
power_state = (state.event == PM_EVENT_ON) ?
ACPI_STATE_D0 : ACPI_STATE_D3;
......
......@@ -773,6 +773,7 @@ sclp_vt220_con_init(void)
{
int rc;
INIT_LIST_HEAD(&sclp_vt220_register.list);
if (!CONSOLE_IS_SCLP)
return 0;
rc = __sclp_vt220_init();
......
......@@ -1598,7 +1598,7 @@ tape_3590_setup_device(struct tape_device *device)
rc = tape_3590_read_dev_chars(device, rdc_data);
if (rc) {
DBF_LH(3, "Read device characteristics failed!\n");
goto fail_kmalloc;
goto fail_rdc_data;
}
rc = tape_std_assign(device);
if (rc)
......
......@@ -97,8 +97,8 @@ static int pure_hex(char **cp, unsigned int *val, int min_digit,
return 0;
}
static int parse_busid(char *str, int *cssid, int *ssid, int *devno,
int msgtrigger)
static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid,
unsigned int *devno, int msgtrigger)
{
char *str_work;
int val, rc, ret;
......@@ -148,7 +148,7 @@ static int parse_busid(char *str, int *cssid, int *ssid, int *devno,
static int blacklist_parse_parameters(char *str, range_action action,
int msgtrigger)
{
int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
int rc, totalrc;
char *parm;
range_action ra;
......
......@@ -576,12 +576,14 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid)
err = -ENODEV;
goto out;
}
if (cio_is_console(sch->schid))
if (cio_is_console(sch->schid)) {
sch->opm = 0xff;
else
sch->isc = 1;
} else {
sch->opm = chp_get_sch_opm(sch);
sch->isc = 3;
}
sch->lpm = sch->schib.pmcw.pam & sch->opm;
sch->isc = 3;
CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
"- PIM = %02X, PAM = %02X, POM = %02X\n",
......@@ -704,9 +706,9 @@ void wait_cons_dev(void)
if (!console_subchannel_in_use)
return;
/* disable all but isc 7 (console device) */
/* disable all but isc 1 (console device) */
__ctl_store (save_cr6, 6, 6);
cr6 = 0x01000000;
cr6 = 0x40000000;
__ctl_load (cr6, 6, 6);
do {
......@@ -788,11 +790,11 @@ cio_probe_console(void)
}
/*
* enable console I/O-interrupt subclass 7
* enable console I/O-interrupt subclass 1
*/
ctl_set_bit(6, 24);
console_subchannel.isc = 7;
console_subchannel.schib.pmcw.isc = 7;
ctl_set_bit(6, 30);
console_subchannel.isc = 1;
console_subchannel.schib.pmcw.isc = 1;
console_subchannel.schib.pmcw.intparm =
(u32)(addr_t)&console_subchannel;
ret = cio_modify(&console_subchannel);
......
......@@ -376,9 +376,9 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
#ifdef CONFIG_PM_SLEEP
int acpi_pm_device_sleep_state(struct device *, int, int *);
int acpi_pm_device_sleep_state(struct device *, int *);
#else /* !CONFIG_PM_SLEEP */
static inline int acpi_pm_device_sleep_state(struct device *d, int w, int *p)
static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
{
if (p)
*p = ACPI_STATE_D0;
......
......@@ -315,14 +315,14 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
asm volatile( \
" lctlg %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
"m" (*(addrtype *)(array))); \
"m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctg %2,%3,0(%1)\n" \
: "=m" (*(addrtype *)(array)) \
: "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
......@@ -333,14 +333,14 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
asm volatile( \
" lctl %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
"m" (*(addrtype *)(array))); \
"m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctl %2,%3,0(%1)\n" \
: "=m" (*(addrtype *)(array)) \
: "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
......
......@@ -153,7 +153,7 @@ enum { ide_unknown, ide_generic, ide_pci,
ide_qd65xx, ide_umc8672, ide_ht6560b,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
ide_pmac, ide_acorn,
ide_au1xxx, ide_palm3710
};
......
......@@ -894,8 +894,6 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg, ulong *raddr)
if (!sfd)
goto out_put_dentry;
err = -ENOMEM;
file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations);
if (!file)
goto out_free;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment