Commit 54427651 authored by Jerry Zuo's avatar Jerry Zuo Committed by Alex Deucher

drm/amd/display: Fix MST daisy chain SST not light up

In SST daisy chain scenario, edid is getting read in mst hotplug
routine. It is getting conflict with drm send_enum_path_resources
kernel thread in terms of i2c bus which is getting locked up in
such case.

Have edid being read in get_mode hook, instead of in hotplug
routine.
Signed-off-by: default avatarJerry Zuo <Jerry.Zuo@amd.com>
Reviewed-by: default avatarRoman Li <Roman.Li@amd.com>
Acked-by: default avatarHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 56e6ed45
......@@ -174,14 +174,60 @@ static const struct drm_connector_funcs dm_dp_mst_connector_funcs = {
.atomic_get_property = amdgpu_dm_connector_atomic_get_property
};
static int dm_connector_update_modes(struct drm_connector *connector,
struct edid *edid)
{
int ret;
ret = drm_add_edid_modes(connector, edid);
drm_edid_to_eld(connector, edid);
return ret;
}
static int dm_dp_mst_get_modes(struct drm_connector *connector)
{
struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
int ret = 0;
ret = drm_add_edid_modes(&aconnector->base, aconnector->edid);
if (!aconnector)
return dm_connector_update_modes(connector, NULL);
if (!aconnector->edid) {
struct edid *edid;
struct dc_sink *dc_sink;
struct dc_sink_init_data init_params = {
.link = aconnector->dc_link,
.sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST };
edid = drm_dp_mst_get_edid(connector, &aconnector->mst_port->mst_mgr, aconnector->port);
drm_edid_to_eld(&aconnector->base, aconnector->edid);
if (!edid) {
drm_mode_connector_update_edid_property(
&aconnector->base,
NULL);
return ret;
}
aconnector->edid = edid;
dc_sink = dc_link_add_remote_sink(
aconnector->dc_link,
(uint8_t *)edid,
(edid->extensions + 1) * EDID_LENGTH,
&init_params);
dc_sink->priv = aconnector;
aconnector->dc_sink = dc_sink;
if (aconnector->dc_sink)
amdgpu_dm_add_sink_to_freesync_module(
connector, edid);
drm_mode_connector_update_edid_property(
&aconnector->base, edid);
}
ret = dm_connector_update_modes(connector, aconnector->edid);
return ret;
}
......@@ -343,66 +389,8 @@ static void dm_dp_mst_hotplug(struct drm_dp_mst_topology_mgr *mgr)
{
struct amdgpu_dm_connector *master = container_of(mgr, struct amdgpu_dm_connector, mst_mgr);
struct drm_device *dev = master->base.dev;
struct amdgpu_device *adev = dev->dev_private;
struct drm_connector *connector;
struct amdgpu_dm_connector *aconnector;
struct edid *edid;
struct dc_sink *dc_sink;
drm_modeset_lock_all(dev);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
aconnector = to_amdgpu_dm_connector(connector);
if (aconnector->port &&
aconnector->port->pdt != DP_PEER_DEVICE_NONE &&
aconnector->port->pdt != DP_PEER_DEVICE_MST_BRANCHING &&
!aconnector->dc_sink) {
/*
* This is plug in case, where port has been created but
* sink hasn't been created yet
*/
if (!aconnector->edid) {
struct dc_sink_init_data init_params = {
.link = aconnector->dc_link,
.sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST};
edid = drm_dp_mst_get_edid(connector, &aconnector->mst_port->mst_mgr, aconnector->port);
if (!edid) {
drm_mode_connector_update_edid_property(
&aconnector->base,
NULL);
continue;
}
aconnector->edid = edid;
dc_sink = dc_link_add_remote_sink(
aconnector->dc_link,
(uint8_t *)edid,
(edid->extensions + 1) * EDID_LENGTH,
&init_params);
dc_sink->priv = aconnector;
aconnector->dc_sink = dc_sink;
if (aconnector->dc_sink)
amdgpu_dm_add_sink_to_freesync_module(
connector,
edid);
dm_restore_drm_connector_state(connector->dev, connector);
} else
edid = aconnector->edid;
DRM_DEBUG_KMS("edid retrieved %p\n", edid);
drm_mode_connector_update_edid_property(
&aconnector->base,
aconnector->edid);
}
}
drm_modeset_unlock_all(dev);
schedule_work(&adev->dm.mst_hotplug_work);
drm_kms_helper_hotplug_event(dev);
}
static void dm_dp_mst_register_connector(struct drm_connector *connector)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment