Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull intel drm fixes from Dave Airlie:
 "Intel fixes came in late, but since I debugged one of them I'll send
  them on,

  Two reverts, a quirk and one warn regression"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/i915: reverse dp link param selection, prefer fast over wide again"
  drm/i915: Track the primary plane correctly when reassigning planes
  drm/i915: Ignore VBT backlight presence check on HP Chromebook 14
  Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"

drivers/gpu/drm/i915/intel_display.c

@@ -11673,6 +11673,9 @@ static struct intel_quirk intel_quirks[] = {
 
 	/* Toshiba CB35 Chromebook (Celeron 2955U) */
 	{ 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
+
+	/* HP Chromebook 14 (Celeron 2955U) */
+	{ 0x0a06, 0x103c, 0x21ed, quirk_backlight_present },
 };
 
 static void intel_init_quirks(struct drm_device *dev)
@@ -11911,6 +11914,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
 		 * ...  */
 		plane = crtc->plane;
 		crtc->plane = !plane;
+		crtc->primary_enabled = true;
 		dev_priv->display.crtc_disable(&crtc->base);
 		crtc->plane = plane;
 

drivers/gpu/drm/i915/intel_dp.c

@@ -906,8 +906,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
 						   bpp);
 
-		for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
-			for (clock = min_clock; clock <= max_clock; clock++) {
+		for (clock = min_clock; clock <= max_clock; clock++) {
+			for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
 				link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
 				link_avail = intel_dp_max_data_rate(link_clock,
 								    lane_count);

drivers/gpu/drm/i915/intel_lvds.c

@@ -111,6 +111,13 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
 
 	pipe_config->adjusted_mode.flags |= flags;
 
+	/* gen2/3 store dither state in pfit control, needs to match */
+	if (INTEL_INFO(dev)->gen < 4) {
+		tmp = I915_READ(PFIT_CONTROL);
+
+		pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE;
+	}
+
 	dotclock = pipe_config->port_clock;
 
 	if (HAS_PCH_SPLIT(dev_priv->dev))

drivers/gpu/drm/i915/intel_panel.c

@@ -361,16 +361,16 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 		pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
 				 PFIT_FILTER_FUZZY);
 
-	/* Make sure pre-965 set dither correctly for 18bpp panels. */
-	if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
-		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-
 out:
 	if ((pfit_control & PFIT_ENABLE) == 0) {
 		pfit_control = 0;
 		pfit_pgm_ratios = 0;
 	}
 
+	/* Make sure pre-965 set dither correctly for 18bpp panels. */
+	if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
+		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
 	pipe_config->gmch_pfit.control = pfit_control;
 	pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
 	pipe_config->gmch_pfit.lvds_border_bits = border;