ath9k_hw: Remove unnecessary chainmask configuration

The chainmasks were already configured at process_ini
before doing init calibration.
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_calib.c

@@ -839,20 +839,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 			       struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath9k_hw_capabilities *pCap = &ah->caps;
-	int val;
 	bool txiqcal_done = false;
 
-	val = REG_READ(ah, AR_ENT_OTP);
-	ath_dbg(common, ATH_DBG_CALIBRATE, "ath9k: AR_ENT_OTP 0x%x\n", val);
-
-	/* Configure rx/tx chains before running AGC/TxiQ cals */
-	if (val & AR_ENT_OTP_CHAIN2_DISABLE)
-		ar9003_hw_set_chain_masks(ah, 0x3, 0x3);
-	else
-		ar9003_hw_set_chain_masks(ah, pCap->rx_chainmask,
-					  pCap->tx_chainmask);
-
 	/* Do Tx IQ Calibration */
 	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1,
 		      AR_PHY_TX_IQCAL_CONTROL_1_IQCORR_I_Q_COFF_DELPT,
@@ -887,9 +875,6 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 	if (txiqcal_done)
 		ar9003_hw_tx_iq_cal_post_proc(ah);
 
-	/* Revert chainmasks to their original values before NF cal */
-	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
-
 	ath9k_hw_start_nfcal(ah, true);
 
 	/* Initialize list pointers */

drivers/net/wireless/ath/ath9k/ar9003_phy.c

@@ -540,7 +540,7 @@ static void ar9003_hw_init_bb(struct ath_hw *ah,
 	udelay(synthDelay + BASE_ACTIVATE_DELAY);
 }
 
-void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
+static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
 {
 	switch (rx) {
 	case 0x5:

drivers/net/wireless/ath/ath9k/ar9003_phy.h

@@ -1124,6 +1124,4 @@
 #define AR_PHY_CL_TAB_CL_GAIN_MOD		0x1f
 #define AR_PHY_CL_TAB_CL_GAIN_MOD_S		0
 
-void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx);
-
 #endif  /* AR9003_PHY_H */