staging: r8822be: Add existing rtlwifi and rtl_pci parts for new driver

The RTL8822BE, an 802.11ac wireless network card, is now appearing in
new computers. Its driver is being placed in staging to reduce the time
that users of this new card will have access to in-kernel drivers.

This commit copies the code that currently constitutes the rtlwifi and
rtl_pci mini drivers. This material is copied into staging to prevent
any undo interaction between the existing drivers and this new one.
The only changes in this code are the removal of all export statements,
and the fixing of some checkpatch messages. The latter will be backported
into the wireless tree.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtlwifi/base.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_BASE_H__
+#define __RTL_BASE_H__
+
+enum ap_peer {
+	PEER_UNKNOWN = 0,
+	PEER_RTL = 1,
+	PEER_RTL_92SE = 2,
+	PEER_BROAD = 3,
+	PEER_RAL = 4,
+	PEER_ATH = 5,
+	PEER_CISCO = 6,
+	PEER_MARV = 7,
+	PEER_AIRGO = 9,
+	PEER_MAX = 10,
+};
+
+#define RTL_DUMMY_OFFSET	0
+#define RTL_DUMMY_UNIT		8
+#define RTL_TX_DUMMY_SIZE	(RTL_DUMMY_OFFSET * RTL_DUMMY_UNIT)
+#define RTL_TX_DESC_SIZE	32
+#define RTL_TX_HEADER_SIZE	(RTL_TX_DESC_SIZE + RTL_TX_DUMMY_SIZE)
+
+#define MAX_BIT_RATE_40MHZ_MCS15	300	/* Mbps */
+#define MAX_BIT_RATE_40MHZ_MCS7		150	/* Mbps */
+
+#define MAX_BIT_RATE_SHORT_GI_2NSS_80MHZ_MCS9	867	/* Mbps */
+#define MAX_BIT_RATE_SHORT_GI_2NSS_80MHZ_MCS7	650	/* Mbps */
+#define MAX_BIT_RATE_LONG_GI_2NSS_80MHZ_MCS9	780	/* Mbps */
+#define MAX_BIT_RATE_LONG_GI_2NSS_80MHZ_MCS7	585	/* Mbps */
+
+#define MAX_BIT_RATE_SHORT_GI_1NSS_80MHZ_MCS9	434	/* Mbps */
+#define MAX_BIT_RATE_SHORT_GI_1NSS_80MHZ_MCS7	325	/* Mbps */
+#define MAX_BIT_RATE_LONG_GI_1NSS_80MHZ_MCS9	390	/* Mbps */
+#define MAX_BIT_RATE_LONG_GI_1NSS_80MHZ_MCS7	293	/* Mbps */
+
+#define FRAME_OFFSET_FRAME_CONTROL	0
+#define FRAME_OFFSET_DURATION		2
+#define FRAME_OFFSET_ADDRESS1		4
+#define FRAME_OFFSET_ADDRESS2		10
+#define FRAME_OFFSET_ADDRESS3		16
+#define FRAME_OFFSET_SEQUENCE		22
+#define FRAME_OFFSET_ADDRESS4		24
+#define MAX_LISTEN_INTERVAL		10
+#define MAX_RATE_TRIES			4
+
+#define SET_80211_HDR_FRAME_CONTROL(_hdr, _val)		\
+	WRITEEF2BYTE(_hdr, _val)
+#define SET_80211_HDR_TYPE_AND_SUBTYPE(_hdr, _val)	\
+	WRITEEF1BYTE(_hdr, _val)
+#define SET_80211_HDR_PWR_MGNT(_hdr, _val)		\
+	SET_BITS_TO_LE_2BYTE(_hdr, 12, 1, _val)
+#define SET_80211_HDR_TO_DS(_hdr, _val)			\
+	SET_BITS_TO_LE_2BYTE(_hdr, 8, 1, _val)
+
+#define SET_80211_PS_POLL_AID(_hdr, _val)		\
+	(*(u16 *)((u8 *)(_hdr) + 2) = _val)
+#define SET_80211_PS_POLL_BSSID(_hdr, _val)		\
+	ether_addr_copy(((u8 *)(_hdr)) + 4, (u8 *)(_val))
+#define SET_80211_PS_POLL_TA(_hdr, _val)		\
+	ether_addr_copy(((u8 *)(_hdr)) + 10, (u8 *)(_val))
+
+#define SET_80211_HDR_DURATION(_hdr, _val)	\
+	(*(u16 *)((u8 *)(_hdr) + FRAME_OFFSET_DURATION) = le16_to_cpu(_val))
+#define SET_80211_HDR_ADDRESS1(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr) + FRAME_OFFSET_ADDRESS1, (u8 *)(_val))
+#define SET_80211_HDR_ADDRESS2(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr) + FRAME_OFFSET_ADDRESS2, (u8 *)(_val))
+#define SET_80211_HDR_ADDRESS3(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr) + FRAME_OFFSET_ADDRESS3, (u8 *)(_val))
+#define SET_80211_HDR_FRAGMENT_SEQUENCE(_hdr, _val)  \
+	WRITEEF2BYTE((u8 *)(_hdr) + FRAME_OFFSET_SEQUENCE, _val)
+
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_LOW(__phdr, __val)	\
+	WRITEEF4BYTE(((u8 *)(__phdr)) + 24, __val)
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_HIGH(__phdr, __val) \
+	WRITEEF4BYTE(((u8 *)(__phdr)) + 28, __val)
+#define SET_BEACON_PROBE_RSP_BEACON_INTERVAL(__phdr, __val) \
+	WRITEEF2BYTE(((u8 *)(__phdr)) + 32, __val)
+#define GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr)		\
+	READEF2BYTE(((u8 *)(__phdr)) + 34)
+#define SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+	WRITEEF2BYTE(((u8 *)(__phdr)) + 34, __val)
+#define MASK_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+	SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, \
+	(GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr) & (~(__val))))
+
+#define SET_TX_DESC_SPE_RPT(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE((__pdesc) + 8, 19, 1, __val)
+#define SET_TX_DESC_SW_DEFINE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE((__pdesc) + 24, 0, 12, __val)
+
+int rtl_init_core(struct ieee80211_hw *hw);
+void rtl_deinit_core(struct ieee80211_hw *hw);
+void rtl_init_rx_config(struct ieee80211_hw *hw);
+void rtl_init_rfkill(struct ieee80211_hw *hw);
+void rtl_deinit_rfkill(struct ieee80211_hw *hw);
+
+void rtl_watch_dog_timer_callback(unsigned long data);
+void rtl_deinit_deferred_work(struct ieee80211_hw *hw);
+
+bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx);
+int rtlwifi_rate_mapping(struct ieee80211_hw *hw, bool isht,
+			 bool isvht, u8 desc_rate);
+bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
+u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx,
+		       bool is_enc);
+
+bool rtl_is_tx_report_skb(struct ieee80211_hw *hw, struct sk_buff *skb);
+void rtl_get_tx_report(struct rtl_tcb_desc *ptcb_desc, u8 *pdesc,
+		       struct ieee80211_hw *hw);
+void rtl_tx_report_handler(struct ieee80211_hw *hw, u8 *tmp_buf,
+			   u8 c2h_cmd_len);
+bool rtl_check_tx_report_acked(struct ieee80211_hw *hw);
+void rtl_wait_tx_report_acked(struct ieee80211_hw *hw, u32 wait_ms);
+u32 rtl_get_hal_edca_param(struct ieee80211_hw *hw,
+			   struct ieee80211_vif *vif,
+			   enum wireless_mode wirelessmode,
+			   struct ieee80211_tx_queue_params *param);
+
+void rtl_beacon_statistic(struct ieee80211_hw *hw, struct sk_buff *skb);
+void rtl_collect_scan_list(struct ieee80211_hw *hw, struct sk_buff *skb);
+void rtl_scan_list_expire(struct ieee80211_hw *hw);
+int rtl_tx_agg_start(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		     struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+int rtl_tx_agg_stop(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		    struct ieee80211_sta *sta, u16 tid);
+int rtl_tx_agg_oper(struct ieee80211_hw *hw,
+		    struct ieee80211_sta *sta, u16 tid);
+int rtl_rx_agg_start(struct ieee80211_hw *hw,
+		     struct ieee80211_sta *sta, u16 tid);
+int rtl_rx_agg_stop(struct ieee80211_hw *hw,
+		    struct ieee80211_sta *sta, u16 tid);
+void rtl_rx_ampdu_apply(struct rtl_priv *rtlpriv);
+void rtl_watchdog_wq_callback(void *data);
+void rtl_fwevt_wq_callback(void *data);
+void rtl_c2hcmd_wq_callback(void *data);
+void rtl_c2hcmd_launcher(struct ieee80211_hw *hw, int exec);
+void rtl_c2hcmd_enqueue(struct ieee80211_hw *hw, u8 tag, u8 len, u8 *val);
+
+u8 rtl_mrate_idx_to_arfr_id(
+	struct ieee80211_hw *hw, u8 rate_index,
+	enum wireless_mode wirelessmode);
+void rtl_get_tcb_desc(struct ieee80211_hw *hw,
+		      struct ieee80211_tx_info *info,
+		      struct ieee80211_sta *sta,
+		      struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc);
+
+int rtl_send_smps_action(struct ieee80211_hw *hw,
+			 struct ieee80211_sta *sta,
+			 enum ieee80211_smps_mode smps);
+u8 *rtl_find_ie(u8 *data, unsigned int len, u8 ie);
+void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len);
+u8 rtl_tid_to_ac(u8 tid);
+void rtl_easy_concurrent_retrytimer_callback(unsigned long data);
+extern struct rtl_global_var rtl_global_var;
+void rtl_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+bool rtl_check_beacon_key(struct ieee80211_hw *hw, void *data,
+			  unsigned int len);
+int rtl_core_module_init(void);
+void rtl_core_module_exit(void);
+#endif

drivers/staging/rtlwifi/cam.c

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#include "wifi.h"
+#include "cam.h"
+#include <linux/export.h>
+
+void rtl_cam_reset_sec_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->sec.use_defaultkey = false;
+	rtlpriv->sec.pairwise_enc_algorithm = NO_ENCRYPTION;
+	rtlpriv->sec.group_enc_algorithm = NO_ENCRYPTION;
+	memset(rtlpriv->sec.key_buf, 0, KEY_BUF_SIZE * MAX_KEY_LEN);
+	memset(rtlpriv->sec.key_len, 0, KEY_BUF_SIZE);
+	rtlpriv->sec.pairwise_key = NULL;
+}
+
+static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no,
+				  u8 *mac_addr, u8 *key_cont_128, u16 us_config)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 target_command;
+	u32 target_content = 0;
+	int entry_i;
+
+	RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_DMESG, "Key content :",
+		      key_cont_128, 16);
+
+	/* 0-1 config + mac, 2-5 fill 128key,6-7 are reserved */
+	for (entry_i = CAM_CONTENT_COUNT - 1; entry_i >= 0; entry_i--) {
+		target_command = entry_i + CAM_CONTENT_COUNT * entry_no;
+		target_command = target_command | BIT(31) | BIT(16);
+
+		if (entry_i == 0) {
+			target_content = (u32)(*(mac_addr + 0)) << 16 |
+					 (u32)(*(mac_addr + 1)) << 24 |
+					 (u32)us_config;
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "WRITE %x: %x\n",
+				 rtlpriv->cfg->maps[WCAMI], target_content);
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "The Key ID is %d\n", entry_no);
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "WRITE %x: %x\n",
+				 rtlpriv->cfg->maps[RWCAM], target_command);
+
+		} else if (entry_i == 1) {
+			target_content = (u32)(*(mac_addr + 5)) << 24 |
+					 (u32)(*(mac_addr + 4)) << 16 |
+					 (u32)(*(mac_addr + 3)) << 8 |
+					 (u32)(*(mac_addr + 2));
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "WRITE A4: %x\n", target_content);
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "WRITE A0: %x\n", target_command);
+		} else {
+			target_content =
+			    (u32)(*(key_cont_128 + (entry_i * 4 - 8) + 3)) <<
+			    24 | (u32)(*(key_cont_128 + (entry_i * 4 - 8) + 2))
+			    << 16 |
+			    (u32)(*(key_cont_128 + (entry_i * 4 - 8) + 1)) << 8
+			    | (u32)(*(key_cont_128 + (entry_i * 4 - 8) + 0));
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "WRITE A4: %x\n", target_content);
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 "WRITE A0: %x\n", target_command);
+		}
+	}
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+		 "after set key, usconfig:%x\n", us_config);
+}
+
+u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			 u32 ul_key_id, u32 ul_entry_idx, u32 ul_enc_alg,
+			 u32 ul_default_key, u8 *key_content)
+{
+	u32 us_config;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 "EntryNo:%x, ulKeyId=%x, ulEncAlg=%x, ulUseDK=%x MacAddr %pM\n",
+		 ul_entry_idx, ul_key_id, ul_enc_alg,
+		 ul_default_key, mac_addr);
+
+	if (ul_key_id == TOTAL_CAM_ENTRY) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "ulKeyId exceed!\n");
+		return 0;
+	}
+
+	if (ul_default_key == 1)
+		us_config = CFG_VALID | ((u16)(ul_enc_alg) << 2);
+	else
+		us_config = CFG_VALID | ((ul_enc_alg) << 2) | ul_key_id;
+
+	rtl_cam_program_entry(hw, ul_entry_idx, mac_addr,
+			      (u8 *)key_content, us_config);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "end\n");
+
+	return 1;
+}
+
+int rtl_cam_delete_one_entry(struct ieee80211_hw *hw,
+			     u8 *mac_addr, u32 ul_key_id)
+{
+	u32 ul_command;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "key_idx:%d\n", ul_key_id);
+
+	ul_command = ul_key_id * CAM_CONTENT_COUNT;
+	ul_command = ul_command | BIT(31) | BIT(16);
+
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], 0);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 "%s(): WRITE A4: %x\n", __func__, 0);
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 "%s(): WRITE A0: %x\n", __func__, ul_command);
+
+	return 0;
+}
+
+void rtl_cam_reset_all_entry(struct ieee80211_hw *hw)
+{
+	u32 ul_command;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	ul_command = BIT(31) | BIT(30);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+}
+
+void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 ul_command;
+	u32 ul_content;
+	u32 ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+
+	switch (rtlpriv->sec.pairwise_enc_algorithm) {
+	case WEP40_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_WEP40];
+		break;
+	case WEP104_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_WEP104];
+		break;
+	case TKIP_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_TKIP];
+		break;
+	case AESCCMP_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+		break;
+	default:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	}
+
+	ul_content = (uc_index & 3) | ((u16)(ul_enc_algo) << 2);
+
+	ul_content |= BIT(15);
+	ul_command = CAM_CONTENT_COUNT * uc_index;
+	ul_command = ul_command | BIT(31) | BIT(16);
+
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 "%s(): WRITE A4: %x\n", __func__, ul_content);
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 "%s(): WRITE A0: %x\n", __func__, ul_command);
+}
+
+void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 ul_command;
+	u32 ul_content;
+	u32 ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	u8 entry_i;
+
+	switch (rtlpriv->sec.pairwise_enc_algorithm) {
+	case WEP40_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_WEP40];
+		break;
+	case WEP104_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_WEP104];
+		break;
+	case TKIP_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_TKIP];
+		break;
+	case AESCCMP_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+		break;
+	default:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	}
+
+	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
+		if (entry_i == 0) {
+			ul_content =
+			    (uc_index & 0x03) | ((u16)(ul_encalgo) << 2);
+			ul_content |= BIT(15);
+		} else {
+			ul_content = 0;
+		}
+
+		ul_command = CAM_CONTENT_COUNT * uc_index + entry_i;
+		ul_command = ul_command | BIT(31) | BIT(16);
+
+		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
+		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+			 "%s(): WRITE A4: %x\n", __func__, ul_content);
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+			 "%s(): WRITE A0: %x\n", __func__, ul_command);
+	}
+}
+
+u8 rtl_cam_get_free_entry(struct ieee80211_hw *hw, u8 *sta_addr)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 bitmap = (rtlpriv->sec.hwsec_cam_bitmap) >> 4;
+	u8 entry_idx = 0;
+	u8 i, *addr;
+
+	if (!sta_addr) {
+		pr_err("sta_addr is NULL.\n");
+		return TOTAL_CAM_ENTRY;
+	}
+	/* Does STA already exist? */
+	for (i = 4; i < TOTAL_CAM_ENTRY; i++) {
+		addr = rtlpriv->sec.hwsec_cam_sta_addr[i];
+		if (ether_addr_equal_unaligned(addr, sta_addr))
+			return i;
+	}
+	/* Get a free CAM entry. */
+	for (entry_idx = 4; entry_idx < TOTAL_CAM_ENTRY; entry_idx++) {
+		if ((bitmap & BIT(0)) == 0) {
+			pr_err("-----hwsec_cam_bitmap: 0x%x entry_idx=%d\n",
+			       rtlpriv->sec.hwsec_cam_bitmap, entry_idx);
+			rtlpriv->sec.hwsec_cam_bitmap |= BIT(0) << entry_idx;
+			memcpy(rtlpriv->sec.hwsec_cam_sta_addr[entry_idx],
+			       sta_addr, ETH_ALEN);
+			return entry_idx;
+		}
+		bitmap = bitmap >> 1;
+	}
+	return TOTAL_CAM_ENTRY;
+}
+
+void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 bitmap;
+	u8 i, *addr;
+
+	if (!sta_addr) {
+		pr_err("sta_addr is NULL.\n");
+		return;
+	}
+
+	if (is_zero_ether_addr(sta_addr)) {
+		pr_err("sta_addr is %pM\n", sta_addr);
+		return;
+	}
+	/* Does STA already exist? */
+	for (i = 4; i < TOTAL_CAM_ENTRY; i++) {
+		addr = rtlpriv->sec.hwsec_cam_sta_addr[i];
+		bitmap = (rtlpriv->sec.hwsec_cam_bitmap) >> i;
+		if (((bitmap & BIT(0)) == BIT(0)) &&
+		    (ether_addr_equal_unaligned(addr, sta_addr))) {
+			/* Remove from HW Security CAM */
+			eth_zero_addr(rtlpriv->sec.hwsec_cam_sta_addr[i]);
+			rtlpriv->sec.hwsec_cam_bitmap &= ~(BIT(0) << i);
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 "&&&&&&&&&del entry %d\n", i);
+		}
+	}
+}

drivers/staging/rtlwifi/cam.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_CAM_H_
+#define __RTL_CAM_H_
+
+#define CAM_CONTENT_COUNT				8
+
+#define CFG_VALID					BIT(15)
+
+#define PAIRWISE_KEYIDX					0
+#define CAM_PAIRWISE_KEY_POSITION			4
+
+#define	CAM_CONFIG_NO_USEDK				0
+
+void rtl_cam_reset_all_entry(struct ieee80211_hw *hw);
+u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			 u32 ul_key_id, u32 ul_entry_idx, u32 ul_enc_alg,
+			 u32 ul_default_key, u8 *key_content);
+int rtl_cam_delete_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			     u32 ul_key_id);
+void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index);
+void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index);
+void rtl_cam_reset_sec_info(struct ieee80211_hw *hw);
+u8 rtl_cam_get_free_entry(struct ieee80211_hw *hw, u8 *sta_addr);
+void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr);
+
+#endif

drivers/staging/rtlwifi/core.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_CORE_H__
+#define __RTL_CORE_H__
+
+#define RTL_SUPPORTED_FILTERS		\
+	(FIF_ALLMULTI | FIF_CONTROL | \
+	FIF_OTHER_BSS | \
+	FIF_FCSFAIL | \
+	FIF_BCN_PRBRESP_PROMISC)
+
+#define DM_DIG_THRESH_HIGH		40
+#define DM_DIG_THRESH_LOW		35
+#define DM_FALSEALARM_THRESH_LOW	400
+#define DM_FALSEALARM_THRESH_HIGH	1000
+
+#define DM_DIG_MAX			0x3e
+#define DM_DIG_MIN			0x1e
+#define DM_DIG_MAX_AP			0x32
+#define DM_DIG_BACKOFF_MAX		12
+#define DM_DIG_BACKOFF_MIN		-4
+#define DM_DIG_BACKOFF_DEFAULT		10
+
+enum cck_packet_detection_threshold {
+	CCK_PD_STAGE_LOWRSSI = 0,
+	CCK_PD_STAGE_HIGHRSSI = 1,
+	CCK_FA_STAGE_LOW = 2,
+	CCK_FA_STAGE_HIGH = 3,
+	CCK_PD_STAGE_MAX = 4,
+};
+
+enum dm_dig_ext_port_alg_e {
+	DIG_EXT_PORT_STAGE_0 = 0,
+	DIG_EXT_PORT_STAGE_1 = 1,
+	DIG_EXT_PORT_STAGE_2 = 2,
+	DIG_EXT_PORT_STAGE_3 = 3,
+	DIG_EXT_PORT_STAGE_MAX = 4,
+};
+
+enum dm_dig_connect_e {
+	DIG_STA_DISCONNECT,
+	DIG_STA_CONNECT,
+	DIG_STA_BEFORE_CONNECT,
+	DIG_MULTISTA_DISCONNECT,
+	DIG_MULTISTA_CONNECT,
+	DIG_AP_DISCONNECT,
+	DIG_AP_CONNECT,
+	DIG_AP_ADD_STATION,
+	DIG_CONNECT_MAX
+};
+
+extern const struct ieee80211_ops rtl_ops;
+void rtl_fw_cb(const struct firmware *firmware, void *context);
+void rtl_wowlan_fw_cb(const struct firmware *firmware, void *context);
+void rtl_addr_delay(u32 addr);
+void rtl_rfreg_delay(struct ieee80211_hw *hw, enum radio_path rfpath, u32 addr,
+		     u32 mask, u32 data);
+void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data);
+bool rtl_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb);
+bool rtl_btc_status_false(void);
+void rtl_dm_diginit(struct ieee80211_hw *hw, u32 cur_igval);
+
+#endif

drivers/staging/rtlwifi/debug.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#ifndef __RTL_DEBUG_H__
+#define __RTL_DEBUG_H__
+
+/*--------------------------------------------------------------
+ *			Debug level
+ *------------------------------------------------------------
+ *
+ *Fatal bug.
+ *For example, Tx/Rx/IO locked up,
+ *memory access violation,
+ *resource allocation failed,
+ *unexpected HW behavior, HW BUG
+ *and so on.
+ */
+/*#define DBG_EMERG			0 */
+
+/*Abnormal, rare, or unexpected cases.
+ *For example, Packet/IO Ctl canceled,
+ *device surprisingly removed and so on.
+ */
+#define	DBG_WARNING			2
+
+/*Normal case driver developer should
+ *open, we can see link status like
+ *assoc/AddBA/DHCP/adapter start and
+ *so on basic and useful infromations.
+ */
+#define DBG_DMESG			3
+
+/*Normal case with useful information
+ *about current SW or HW state.
+ *For example, Tx/Rx descriptor to fill,
+ *Tx/Rx descriptor completed status,
+ *SW protocol state change, dynamic
+ *mechanism state change and so on.
+ */
+#define DBG_LOUD			4
+
+/*Normal case with detail execution
+ *flow or information.
+ */
+#define	DBG_TRACE			5
+
+/*--------------------------------------------------------------
+ *		Define the rt_trace components
+ *--------------------------------------------------------------
+ */
+#define COMP_ERR			BIT(0)
+#define COMP_FW				BIT(1)
+#define COMP_INIT			BIT(2)	/*For init/deinit */
+#define COMP_RECV			BIT(3)	/*For Rx. */
+#define COMP_SEND			BIT(4)	/*For Tx. */
+#define COMP_MLME			BIT(5)	/*For MLME. */
+#define COMP_SCAN			BIT(6)	/*For Scan. */
+#define COMP_INTR			BIT(7)	/*For interrupt Related. */
+#define COMP_LED			BIT(8)	/*For LED. */
+#define COMP_SEC			BIT(9)	/*For sec. */
+#define COMP_BEACON			BIT(10)	/*For beacon. */
+#define COMP_RATE			BIT(11)	/*For rate. */
+#define COMP_RXDESC			BIT(12)	/*For rx desc. */
+#define COMP_DIG			BIT(13)	/*For DIG */
+#define COMP_TXAGC			BIT(14)	/*For Tx power */
+#define COMP_HIPWR			BIT(15)	/*For High Power Mechanism */
+#define COMP_POWER			BIT(16)	/*For lps/ips/aspm. */
+#define COMP_POWER_TRACKING	BIT(17)	/*For TX POWER TRACKING */
+#define COMP_BB_POWERSAVING	BIT(18)
+#define COMP_SWAS			BIT(19)	/*For SW Antenna Switch */
+#define COMP_RF				BIT(20)	/*For RF. */
+#define COMP_TURBO			BIT(21)	/*For EDCA TURBO. */
+#define COMP_RATR			BIT(22)
+#define COMP_CMD			BIT(23)
+#define COMP_EFUSE			BIT(24)
+#define COMP_QOS			BIT(25)
+#define COMP_MAC80211		BIT(26)
+#define COMP_REGD			BIT(27)
+#define COMP_CHAN			BIT(28)
+#define COMP_USB			BIT(29)
+#define COMP_EASY_CONCURRENT	COMP_USB /* reuse of this bit is OK */
+#define COMP_BT_COEXIST			BIT(30)
+#define COMP_IQK			BIT(31)
+#define COMP_TX_REPORT			BIT_ULL(32)
+#define COMP_HALMAC			BIT_ULL(34)
+#define COMP_PHYDM			BIT_ULL(35)
+
+/*--------------------------------------------------------------
+ *		Define the rt_print components
+ *--------------------------------------------------------------
+ */
+/* Define EEPROM and EFUSE  check module bit*/
+#define EEPROM_W			BIT(0)
+#define EFUSE_PG			BIT(1)
+#define EFUSE_READ_ALL			BIT(2)
+
+/* Define init check for module bit*/
+#define	INIT_EEPROM			BIT(0)
+#define	INIT_TXPOWER			BIT(1)
+#define	INIT_IQK			BIT(2)
+#define	INIT_RF				BIT(3)
+
+/* Define PHY-BB/RF/MAC check module bit */
+#define	PHY_BBR				BIT(0)
+#define	PHY_BBW				BIT(1)
+#define	PHY_RFR				BIT(2)
+#define	PHY_RFW				BIT(3)
+#define	PHY_MACR			BIT(4)
+#define	PHY_MACW			BIT(5)
+#define	PHY_ALLR			BIT(6)
+#define	PHY_ALLW			BIT(7)
+#define	PHY_TXPWR			BIT(8)
+#define	PHY_PWRDIFF			BIT(9)
+
+/* Define Dynamic Mechanism check module bit --> FDM */
+#define WA_IOT				BIT(0)
+#define DM_PWDB				BIT(1)
+#define DM_MONITOR			BIT(2)
+#define DM_DIG				BIT(3)
+#define DM_EDCA_TURBO			BIT(4)
+
+#define DM_PWDB				BIT(1)
+
+enum dbgp_flag_e {
+	FQOS = 0,
+	FTX = 1,
+	FRX = 2,
+	FSEC = 3,
+	FMGNT = 4,
+	FMLME = 5,
+	FRESOURCE = 6,
+	FBEACON = 7,
+	FISR = 8,
+	FPHY = 9,
+	FMP = 10,
+	FEEPROM = 11,
+	FPWR = 12,
+	FDM = 13,
+	FDBGCTRL = 14,
+	FC2H = 15,
+	FBT = 16,
+	FINIT = 17,
+	FIOCTL = 18,
+	DBGP_TYPE_MAX
+};
+
+#ifdef CONFIG_RTLWIFI_DEBUG_ST
+
+struct rtl_priv;
+
+__printf(4, 5)
+void _rtl_dbg_trace(struct rtl_priv *rtlpriv, u64 comp, int level,
+		    const char *fmt, ...);
+
+__printf(4, 5)
+void _rtl_dbg_print(struct rtl_priv *rtlpriv, u64 comp, int level,
+		    const char *fmt, ...);
+
+void _rtl_dbg_print_data(struct rtl_priv *rtlpriv, u64 comp, int level,
+			 const char *titlestring,
+			 const void *hexdata, int hexdatalen);
+
+#define RT_TRACE(rtlpriv, comp, level, fmt, ...)			\
+	_rtl_dbg_trace(rtlpriv, comp, level,				\
+		       fmt, ##__VA_ARGS__)
+
+#define RTPRINT(rtlpriv, dbgtype, dbgflag, fmt, ...)			\
+	_rtl_dbg_print(rtlpriv, dbgtype, dbgflag, fmt, ##__VA_ARGS__)
+
+#define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata,	\
+		      _hexdatalen)					\
+	_rtl_dbg_print_data(rtlpriv, _comp, _level,			\
+			    _titlestring, _hexdata, _hexdatalen)
+
+#else
+
+struct rtl_priv;
+
+__printf(4, 5)
+static inline void RT_TRACE(struct rtl_priv *rtlpriv,
+			    u64 comp, int level,
+			    const char *fmt, ...)
+{
+}
+
+__printf(4, 5)
+static inline void RTPRINT(struct rtl_priv *rtlpriv,
+			   int dbgtype, int dbgflag,
+			   const char *fmt, ...)
+{
+}
+
+static inline void RT_PRINT_DATA(struct rtl_priv *rtlpriv,
+				 u64 comp, int level,
+				 const char *titlestring,
+				 const void *hexdata, size_t hexdatalen)
+{
+}
+
+#endif
+
+#ifdef CONFIG_RTLWIFI_DEBUG_ST
+void rtl_debug_add_one(struct ieee80211_hw *hw);
+void rtl_debug_remove_one(struct ieee80211_hw *hw);
+void rtl_debugfs_add_topdir(void);
+void rtl_debugfs_remove_topdir(void);
+#else
+#define rtl_debug_add_one(hw)
+#define rtl_debug_remove_one(hw)
+#define rtl_debugfs_add_topdir()
+#define rtl_debugfs_remove_topdir()
+#endif
+#endif

drivers/staging/rtlwifi/efuse.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_EFUSE_H_
+#define __RTL_EFUSE_H_
+
+#define EFUSE_IC_ID_OFFSET		506
+
+#define EFUSE_MAX_WORD_UNIT		4
+
+#define EFUSE_INIT_MAP			0
+#define EFUSE_MODIFY_MAP		1
+
+#define PG_STATE_HEADER			0x01
+#define PG_STATE_WORD_0			0x02
+#define PG_STATE_WORD_1			0x04
+#define PG_STATE_WORD_2			0x08
+#define PG_STATE_WORD_3			0x10
+#define PG_STATE_DATA			0x20
+
+#define EFUSE_REPEAT_THRESHOLD_		3
+#define EFUSE_ERROE_HANDLE		1
+
+struct efuse_map {
+	u8 offset;
+	u8 word_start;
+	u8 byte_start;
+	u8 byte_cnts;
+};
+
+struct pgpkt_struct {
+	u8 offset;
+	u8 word_en;
+	u8 data[8];
+};
+
+enum efuse_data_item {
+	EFUSE_CHIP_ID = 0,
+	EFUSE_LDO_SETTING,
+	EFUSE_CLK_SETTING,
+	EFUSE_SDIO_SETTING,
+	EFUSE_CCCR,
+	EFUSE_SDIO_MODE,
+	EFUSE_OCR,
+	EFUSE_F0CIS,
+	EFUSE_F1CIS,
+	EFUSE_MAC_ADDR,
+	EFUSE_EEPROM_VER,
+	EFUSE_CHAN_PLAN,
+	EFUSE_TXPW_TAB
+};
+
+enum {
+	VOLTAGE_V25 = 0x03,
+	LDOE25_SHIFT = 28,
+};
+
+struct efuse_priv {
+	u8 id[2];
+	u8 ldo_setting[2];
+	u8 clk_setting[2];
+	u8 cccr;
+	u8 sdio_mode;
+	u8 ocr[3];
+	u8 cis0[17];
+	u8 cis1[48];
+	u8 mac_addr[6];
+	u8 eeprom_verno;
+	u8 channel_plan;
+	u8 tx_power_b[14];
+	u8 tx_power_g[14];
+};
+
+void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf);
+void efuse_initialize(struct ieee80211_hw *hw);
+u8 efuse_read_1byte(struct ieee80211_hw *hw, u16 address);
+int efuse_one_byte_read(struct ieee80211_hw *hw, u16 addr, u8 *data);
+void efuse_write_1byte(struct ieee80211_hw *hw, u16 address, u8 value);
+void read_efuse(struct ieee80211_hw *hw, u16 _offset,
+		u16 _size_byte, u8 *pbuf);
+void efuse_shadow_read(struct ieee80211_hw *hw, u8 type,
+		       u16 offset, u32 *value);
+void efuse_shadow_write(struct ieee80211_hw *hw, u8 type,
+			u16 offset, u32 value);
+bool efuse_shadow_update(struct ieee80211_hw *hw);
+bool efuse_shadow_update_chk(struct ieee80211_hw *hw);
+void rtl_efuse_shadow_map_update(struct ieee80211_hw *hw);
+void efuse_force_write_vendor_id(struct ieee80211_hw *hw);
+void efuse_re_pg_section(struct ieee80211_hw *hw, u8 section_idx);
+void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate);
+int rtl_get_hwinfo(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv,
+		   int max_size, u8 *hwinfo, int *params);
+void rtl_fill_dummy(u8 *pfwbuf, u32 *pfwlen);
+void rtl_fw_page_write(struct ieee80211_hw *hw, u32 page, const u8 *buffer,
+		       u32 size);
+void rtl_fw_block_write(struct ieee80211_hw *hw, const u8 *buffer, u32 size);
+
+#endif

drivers/staging/rtlwifi/pci.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_PCI_H__
+#define __RTL_PCI_H__
+
+#include <linux/pci.h>
+/* 1: MSDU packet queue,
+ * 2: Rx Command Queue
+ */
+#define RTL_PCI_RX_MPDU_QUEUE			0
+#define RTL_PCI_RX_CMD_QUEUE			1
+#define RTL_PCI_MAX_RX_QUEUE			2
+
+#define RTL_PCI_MAX_RX_COUNT			512/*64*/
+#define RTL_PCI_MAX_TX_QUEUE_COUNT		9
+
+#define RT_TXDESC_NUM				128
+#define TX_DESC_NUM_92E				512
+#define TX_DESC_NUM_8822B			512
+#define RT_TXDESC_NUM_BE_QUEUE			256
+
+#define BK_QUEUE				0
+#define BE_QUEUE				1
+#define VI_QUEUE				2
+#define VO_QUEUE				3
+#define BEACON_QUEUE				4
+#define TXCMD_QUEUE				5
+#define MGNT_QUEUE				6
+#define HIGH_QUEUE				7
+#define HCCA_QUEUE				8
+#define H2C_QUEUE				TXCMD_QUEUE	/* In 8822B */
+
+#define RTL_PCI_DEVICE(vend, dev, cfg)  \
+	.vendor = (vend), \
+	.device = (dev), \
+	.subvendor = PCI_ANY_ID, \
+	.subdevice = PCI_ANY_ID,\
+	.driver_data = (kernel_ulong_t)&(cfg)
+
+#define INTEL_VENDOR_ID				0x8086
+#define SIS_VENDOR_ID				0x1039
+#define ATI_VENDOR_ID				0x1002
+#define ATI_DEVICE_ID				0x7914
+#define AMD_VENDOR_ID				0x1022
+
+#define PCI_MAX_BRIDGE_NUMBER			255
+#define PCI_MAX_DEVICES				32
+#define PCI_MAX_FUNCTION			8
+
+#define PCI_CONF_ADDRESS	0x0CF8	/*PCI Configuration Space Address */
+#define PCI_CONF_DATA		0x0CFC	/*PCI Configuration Space Data */
+
+#define PCI_CLASS_BRIDGE_DEV		0x06
+#define PCI_SUBCLASS_BR_PCI_TO_PCI	0x04
+#define PCI_CAPABILITY_ID_PCI_EXPRESS	0x10
+#define PCI_CAP_ID_EXP			0x10
+
+#define U1DONTCARE			0xFF
+#define U2DONTCARE			0xFFFF
+#define U4DONTCARE			0xFFFFFFFF
+
+#define RTL_PCI_8192_DID	0x8192	/*8192 PCI-E */
+#define RTL_PCI_8192SE_DID	0x8192	/*8192 SE */
+#define RTL_PCI_8174_DID	0x8174	/*8192 SE */
+#define RTL_PCI_8173_DID	0x8173	/*8191 SE Crab */
+#define RTL_PCI_8172_DID	0x8172	/*8191 SE RE */
+#define RTL_PCI_8171_DID	0x8171	/*8191 SE Unicron */
+#define RTL_PCI_8723AE_DID	0x8723	/*8723AE */
+#define RTL_PCI_0045_DID	0x0045	/*8190 PCI for Ceraga */
+#define RTL_PCI_0046_DID	0x0046	/*8190 Cardbus for Ceraga */
+#define RTL_PCI_0044_DID	0x0044	/*8192e PCIE for Ceraga */
+#define RTL_PCI_0047_DID	0x0047	/*8192e Express Card for Ceraga */
+#define RTL_PCI_700F_DID	0x700F
+#define RTL_PCI_701F_DID	0x701F
+#define RTL_PCI_DLINK_DID	0x3304
+#define RTL_PCI_8723AE_DID	0x8723	/*8723e */
+#define RTL_PCI_8192CET_DID	0x8191	/*8192ce */
+#define RTL_PCI_8192CE_DID	0x8178	/*8192ce */
+#define RTL_PCI_8191CE_DID	0x8177	/*8192ce */
+#define RTL_PCI_8188CE_DID	0x8176	/*8192ce */
+#define RTL_PCI_8192CU_DID	0x8191	/*8192ce */
+#define RTL_PCI_8192DE_DID	0x8193	/*8192de */
+#define RTL_PCI_8192DE_DID2	0x002B	/*92DE*/
+#define RTL_PCI_8188EE_DID	0x8179  /*8188ee*/
+#define RTL_PCI_8723BE_DID	0xB723  /*8723be*/
+#define RTL_PCI_8192EE_DID	0x818B	/*8192ee*/
+#define RTL_PCI_8821AE_DID	0x8821	/*8821ae*/
+#define RTL_PCI_8812AE_DID	0x8812	/*8812ae*/
+#define RTL_PCI_8822BE_DID	0xB822	/*8822be*/
+
+/*8192 support 16 pages of IO registers*/
+#define RTL_MEM_MAPPED_IO_RANGE_8190PCI		0x1000
+#define RTL_MEM_MAPPED_IO_RANGE_8192PCIE	0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192SE		0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192CE		0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192DE		0x4000
+
+#define RTL_PCI_REVISION_ID_8190PCI		0x00
+#define RTL_PCI_REVISION_ID_8192PCIE		0x01
+#define RTL_PCI_REVISION_ID_8192SE		0x10
+#define RTL_PCI_REVISION_ID_8192CE		0x1
+#define RTL_PCI_REVISION_ID_8192DE		0x0
+
+#define RTL_DEFAULT_HARDWARE_TYPE	HARDWARE_TYPE_RTL8192CE
+
+enum pci_bridge_vendor {
+	PCI_BRIDGE_VENDOR_INTEL = 0x0,	/*0b'0000,0001 */
+	PCI_BRIDGE_VENDOR_ATI,		/*0b'0000,0010*/
+	PCI_BRIDGE_VENDOR_AMD,		/*0b'0000,0100*/
+	PCI_BRIDGE_VENDOR_SIS,		/*0b'0000,1000*/
+	PCI_BRIDGE_VENDOR_UNKNOWN,	/*0b'0100,0000*/
+	PCI_BRIDGE_VENDOR_MAX,
+};
+
+struct rtl_pci_capabilities_header {
+	u8 capability_id;
+	u8 next;
+};
+
+/* In new TRX flow, Buffer_desc is new concept
+ * But TX wifi info == TX descriptor in old flow
+ * RX wifi info == RX descriptor in old flow
+ */
+struct rtl_tx_buffer_desc {
+	u32 dword[4 * (1 << (BUFDESC_SEG_NUM + 1))];
+} __packed;
+
+struct rtl_tx_desc {
+	u32 dword[16];
+} __packed;
+
+struct rtl_rx_buffer_desc { /*rx buffer desc*/
+	u32 dword[4];
+} __packed;
+
+struct rtl_rx_desc { /*old: rx desc new: rx wifi info*/
+	u32 dword[8];
+} __packed;
+
+struct rtl_tx_cmd_desc {
+	u32 dword[16];
+} __packed;
+
+struct rtl8192_tx_ring {
+	struct rtl_tx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	unsigned int entries;
+	struct sk_buff_head queue;
+	/*add for new trx flow*/
+	struct rtl_tx_buffer_desc *buffer_desc; /*tx buffer descriptor*/
+	dma_addr_t buffer_desc_dma; /*tx bufferd desc dma memory*/
+	u16 cur_tx_wp; /* current_tx_write_point */
+	u16 cur_tx_rp; /* current_tx_read_point */
+};
+
+struct rtl8192_rx_ring {
+	struct rtl_rx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	struct sk_buff *rx_buf[RTL_PCI_MAX_RX_COUNT];
+	/*add for new trx flow*/
+	struct rtl_rx_buffer_desc *buffer_desc; /*rx buffer descriptor*/
+	u16 next_rx_rp; /* next_rx_read_point */
+};
+
+struct rtl_pci {
+	struct pci_dev *pdev;
+	bool irq_enabled;
+
+	bool driver_is_goingto_unload;
+	bool up_first_time;
+	bool first_init;
+	bool being_init_adapter;
+	bool init_ready;
+
+	/*Tx */
+	struct rtl8192_tx_ring tx_ring[RTL_PCI_MAX_TX_QUEUE_COUNT];
+	int txringcount[RTL_PCI_MAX_TX_QUEUE_COUNT];
+	u32 transmit_config;
+
+	/*Rx */
+	struct rtl8192_rx_ring rx_ring[RTL_PCI_MAX_RX_QUEUE];
+	int rxringcount;
+	u16 rxbuffersize;
+	u32 receive_config;
+
+	/*irq */
+	u8 irq_alloc;
+	u32 irq_mask[4];	/* 0-1: normal, 2: unused, 3: h2c */
+	u32 sys_irq_mask;
+
+	/*Bcn control register setting */
+	u32 reg_bcn_ctrl_val;
+
+	 /*ASPM*/ u8 const_pci_aspm;
+	u8 const_amdpci_aspm;
+	u8 const_hwsw_rfoff_d3;
+	u8 const_support_pciaspm;
+	/*pci-e bridge */
+	u8 const_hostpci_aspm_setting;
+	/*pci-e device */
+	u8 const_devicepci_aspm_setting;
+	/* If it supports ASPM, Offset[560h] = 0x40,
+	 * otherwise Offset[560h] = 0x00.
+	 */
+	bool support_aspm;
+	bool support_backdoor;
+
+	/*QOS & EDCA */
+	enum acm_method acm_method;
+
+	u16 shortretry_limit;
+	u16 longretry_limit;
+
+	/* MSI support */
+	bool msi_support;
+	bool using_msi;
+	/* interrupt clear before set */
+	bool int_clear;
+};
+
+struct mp_adapter {
+	u8 linkctrl_reg;
+
+	u8 busnumber;
+	u8 devnumber;
+	u8 funcnumber;
+
+	u8 pcibridge_busnum;
+	u8 pcibridge_devnum;
+	u8 pcibridge_funcnum;
+
+	u8 pcibridge_vendor;
+	u16 pcibridge_vendorid;
+	u16 pcibridge_deviceid;
+
+	u8 num4bytes;
+
+	u8 pcibridge_pciehdr_offset;
+	u8 pcibridge_linkctrlreg;
+
+	bool amd_l1_patch;
+};
+
+struct rtl_pci_priv {
+	struct bt_coexist_info bt_coexist;
+	struct rtl_led_ctl ledctl;
+	struct rtl_pci dev;
+	struct mp_adapter ndis_adapter;
+};
+
+#define rtl_pcipriv(hw)		(((struct rtl_pci_priv *)(rtl_priv(hw))->priv))
+#define rtl_pcidev(pcipriv)	(&((pcipriv)->dev))
+
+int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw);
+
+extern const struct rtl_intf_ops rtl_pci_ops;
+
+int rtl_pci_probe(struct pci_dev *pdev,
+		  const struct pci_device_id *id);
+void rtl_pci_disconnect(struct pci_dev *pdev);
+#ifdef CONFIG_PM_SLEEP
+int rtl_pci_suspend(struct device *dev);
+int rtl_pci_resume(struct device *dev);
+#endif /* CONFIG_PM_SLEEP */
+static inline u8 pci_read8_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return readb((u8 __iomem *)rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline u16 pci_read16_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return readw((u8 __iomem *)rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline u32 pci_read32_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return readl((u8 __iomem *)rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write8_async(struct rtl_priv *rtlpriv, u32 addr, u8 val)
+{
+	writeb(val, (u8 __iomem *)rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write16_async(struct rtl_priv *rtlpriv,
+				     u32 addr, u16 val)
+{
+	writew(val, (u8 __iomem *)rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write32_async(struct rtl_priv *rtlpriv,
+				     u32 addr, u32 val)
+{
+	writel(val, (u8 __iomem *)rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline u16 calc_fifo_space(u16 rp, u16 wp, u16 size)
+{
+	if (rp <= wp)
+		return size - 1 + rp - wp;
+	return rp - wp - 1;
+}
+
+#endif

drivers/staging/rtlwifi/ps.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __REALTEK_RTL_PCI_PS_H__
+#define __REALTEK_RTL_PCI_PS_H__
+
+#define MAX_SW_LPS_SLEEP_INTV	5
+
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw);
+void rtl_ips_nic_off(struct ieee80211_hw *hw);
+void rtl_ips_nic_on(struct ieee80211_hw *hw);
+void rtl_ips_nic_off_wq_callback(void *data);
+void rtl_lps_enter(struct ieee80211_hw *hw);
+void rtl_lps_leave(struct ieee80211_hw *hw);
+
+void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode);
+
+void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len);
+void rtl_swlps_wq_callback(void *data);
+void rtl_swlps_rfon_wq_callback(void *data);
+void rtl_swlps_rf_awake(struct ieee80211_hw *hw);
+void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
+void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
+void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
+void rtl_lps_change_work_callback(struct work_struct *work);
+
+#endif

drivers/staging/rtlwifi/pwrseqcmd.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL8723E_PWRSEQCMD_H__
+#define __RTL8723E_PWRSEQCMD_H__
+
+#include "wifi.h"
+/*---------------------------------------------
+ * 3 The value of cmd: 4 bits
+ *---------------------------------------------
+ */
+#define    PWR_CMD_READ		0x00
+#define    PWR_CMD_WRITE	0x01
+#define    PWR_CMD_POLLING	0x02
+#define    PWR_CMD_DELAY	0x03
+#define    PWR_CMD_END		0x04
+
+/* define the base address of each block */
+#define   PWR_BASEADDR_MAC	0x00
+#define   PWR_BASEADDR_USB	0x01
+#define   PWR_BASEADDR_PCIE	0x02
+#define   PWR_BASEADDR_SDIO	0x03
+
+#define	PWR_INTF_SDIO_MSK	BIT(0)
+#define	PWR_INTF_USB_MSK	BIT(1)
+#define	PWR_INTF_PCI_MSK	BIT(2)
+#define	PWR_INTF_ALL_MSK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+#define	PWR_FAB_TSMC_MSK	BIT(0)
+#define	PWR_FAB_UMC_MSK		BIT(1)
+#define	PWR_FAB_ALL_MSK		(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+#define	PWR_CUT_TESTCHIP_MSK	BIT(0)
+#define	PWR_CUT_A_MSK		BIT(1)
+#define	PWR_CUT_B_MSK		BIT(2)
+#define	PWR_CUT_C_MSK		BIT(3)
+#define	PWR_CUT_D_MSK		BIT(4)
+#define	PWR_CUT_E_MSK		BIT(5)
+#define	PWR_CUT_F_MSK		BIT(6)
+#define	PWR_CUT_G_MSK		BIT(7)
+#define	PWR_CUT_ALL_MSK		0xFF
+
+enum pwrseq_delay_unit {
+	PWRSEQ_DELAY_US,
+	PWRSEQ_DELAY_MS,
+};
+
+struct wlan_pwr_cfg {
+	u16 offset;
+	u8 cut_msk;
+	u8 fab_msk:4;
+	u8 interface_msk:4;
+	u8 base:4;
+	u8 cmd:4;
+	u8 msk;
+	u8 value;
+};
+
+#define	GET_PWR_CFG_OFFSET(__PWR_CMD)	(__PWR_CMD.offset)
+#define	GET_PWR_CFG_CUT_MASK(__PWR_CMD)	(__PWR_CMD.cut_msk)
+#define	GET_PWR_CFG_FAB_MASK(__PWR_CMD)	(__PWR_CMD.fab_msk)
+#define	GET_PWR_CFG_INTF_MASK(__PWR_CMD)	(__PWR_CMD.interface_msk)
+#define	GET_PWR_CFG_BASE(__PWR_CMD)	(__PWR_CMD.base)
+#define	GET_PWR_CFG_CMD(__PWR_CMD)	(__PWR_CMD.cmd)
+#define	GET_PWR_CFG_MASK(__PWR_CMD)	(__PWR_CMD.msk)
+#define	GET_PWR_CFG_VALUE(__PWR_CMD)	(__PWR_CMD.value)
+
+bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+			      u8 fab_version, u8 interface_type,
+			      struct wlan_pwr_cfg pwrcfgcmd[]);
+
+#endif

drivers/staging/rtlwifi/rc.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_RC_H__
+#define __RTL_RC_H__
+
+#define B_MODE_MAX_RIX 3
+#define G_MODE_MAX_RIX 11
+#define A_MODE_MAX_RIX 7
+
+/* in mac80211 mcs0-mcs15 is idx0-idx15*/
+#define N_MODE_MCS7_RIX 7
+#define N_MODE_MCS15_RIX 15
+
+/* in mac80211 vht mcs0-9 is in [3:0], nss is in [:4] */
+#define AC_MODE_MCS7_RIX 7
+#define AC_MODE_MCS8_RIX 8
+#define AC_MODE_MCS9_RIX 9
+
+struct rtl_rate_priv {
+	u8 ht_cap;
+};
+
+int rtl_rate_control_register(void);
+void rtl_rate_control_unregister(void);
+
+#endif

drivers/staging/rtlwifi/stats.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_STATS_H__
+#define __RTL_STATS_H__
+
+#define	PHY_RSSI_SLID_WIN_MAX			100
+#define	PHY_LINKQUALITY_SLID_WIN_MAX		20
+#define	PHY_BEACON_RSSI_SLID_WIN_MAX		10
+
+/* Rx smooth factor */
+#define	RX_SMOOTH_FACTOR			20
+
+u8 rtl_query_rxpwrpercentage(s8 antpower);
+u8 rtl_evm_db_to_percentage(s8 value);
+long rtl_signal_scale_mapping(struct ieee80211_hw *hw, long currsig);
+void rtl_process_phyinfo(struct ieee80211_hw *hw, u8 *buffer,
+			 struct rtl_stats *pstatus);
+
+#endif