Commit 56fba41f authored by Mark Brown's avatar Mark Brown

ASoC: Specify target bias state directly as a bias state

Rather than a simple flag to say if we want the DAPM context to be at full
power specify the target bias state. This should have no current effect
but is a bit more direct and so makes it easier to change our decisions
about the which bias state to go into in future.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
parent 6dffdea7
......@@ -510,7 +510,7 @@ struct snd_soc_dapm_context {
struct snd_soc_card *card; /* parent card */
/* used during DAPM updates */
int dev_power;
enum snd_soc_bias_level target_bias_level;
struct list_head list;
#ifdef CONFIG_DEBUG_FS
......
......@@ -214,10 +214,10 @@
* @OFF: Power Off. No restrictions on transition times.
*/
enum snd_soc_bias_level {
SND_SOC_BIAS_OFF,
SND_SOC_BIAS_STANDBY,
SND_SOC_BIAS_PREPARE,
SND_SOC_BIAS_ON,
SND_SOC_BIAS_OFF = 0,
SND_SOC_BIAS_STANDBY = 1,
SND_SOC_BIAS_PREPARE = 2,
SND_SOC_BIAS_ON = 3,
};
struct snd_jack;
......
......@@ -1042,16 +1042,17 @@ static void dapm_pre_sequence_async(void *data, async_cookie_t cookie)
struct snd_soc_dapm_context *d = data;
int ret;
if (d->dev_power && d->bias_level == SND_SOC_BIAS_OFF) {
/* If we're off and we're not supposed to be go into STANDBY */
if (d->bias_level == SND_SOC_BIAS_OFF &&
d->target_bias_level != SND_SOC_BIAS_OFF) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_STANDBY);
if (ret != 0)
dev_err(d->dev,
"Failed to turn on bias: %d\n", ret);
}
/* If we're changing to all on or all off then prepare */
if ((d->dev_power && d->bias_level == SND_SOC_BIAS_STANDBY) ||
(!d->dev_power && d->bias_level == SND_SOC_BIAS_ON)) {
/* Prepare for a STADDBY->ON or ON->STANDBY transition */
if (d->bias_level != d->target_bias_level) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_PREPARE);
if (ret != 0)
dev_err(d->dev,
......@@ -1068,7 +1069,9 @@ static void dapm_post_sequence_async(void *data, async_cookie_t cookie)
int ret;
/* If we just powered the last thing off drop to standby bias */
if (d->bias_level == SND_SOC_BIAS_PREPARE && !d->dev_power) {
if (d->bias_level == SND_SOC_BIAS_PREPARE &&
(d->target_bias_level == SND_SOC_BIAS_STANDBY ||
d->target_bias_level == SND_SOC_BIAS_OFF)) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_STANDBY);
if (ret != 0)
dev_err(d->dev, "Failed to apply standby bias: %d\n",
......@@ -1076,14 +1079,16 @@ static void dapm_post_sequence_async(void *data, async_cookie_t cookie)
}
/* If we're in standby and can support bias off then do that */
if (d->bias_level == SND_SOC_BIAS_STANDBY && d->idle_bias_off) {
if (d->bias_level == SND_SOC_BIAS_STANDBY &&
d->target_bias_level == SND_SOC_BIAS_OFF) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_OFF);
if (ret != 0)
dev_err(d->dev, "Failed to turn off bias: %d\n", ret);
}
/* If we just powered up then move to active bias */
if (d->bias_level == SND_SOC_BIAS_PREPARE && d->dev_power) {
if (d->bias_level == SND_SOC_BIAS_PREPARE &&
d->target_bias_level == SND_SOC_BIAS_ON) {
ret = snd_soc_dapm_set_bias_level(d, SND_SOC_BIAS_ON);
if (ret != 0)
dev_err(d->dev, "Failed to apply active bias: %d\n",
......@@ -1108,13 +1113,19 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
LIST_HEAD(up_list);
LIST_HEAD(down_list);
LIST_HEAD(async_domain);
enum snd_soc_bias_level bias;
int power;
trace_snd_soc_dapm_start(card);
list_for_each_entry(d, &card->dapm_list, list)
if (d->n_widgets || d->codec == NULL)
d->dev_power = 0;
list_for_each_entry(d, &card->dapm_list, list) {
if (d->n_widgets || d->codec == NULL) {
if (d->idle_bias_off)
d->target_bias_level = SND_SOC_BIAS_OFF;
else
d->target_bias_level = SND_SOC_BIAS_STANDBY;
}
}
/* Check which widgets we need to power and store them in
* lists indicating if they should be powered up or down.
......@@ -1137,7 +1148,7 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
else
power = 1;
if (power)
w->dapm->dev_power = 1;
w->dapm->target_bias_level = SND_SOC_BIAS_ON;
if (w->power == power)
continue;
......@@ -1161,24 +1172,19 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
switch (event) {
case SND_SOC_DAPM_STREAM_START:
case SND_SOC_DAPM_STREAM_RESUME:
dapm->dev_power = 1;
dapm->target_bias_level = SND_SOC_BIAS_ON;
break;
case SND_SOC_DAPM_STREAM_STOP:
dapm->dev_power = !!dapm->codec->active;
if (dapm->codec->active)
dapm->target_bias_level = SND_SOC_BIAS_ON;
else
dapm->target_bias_level = SND_SOC_BIAS_STANDBY;
break;
case SND_SOC_DAPM_STREAM_SUSPEND:
dapm->dev_power = 0;
dapm->target_bias_level = SND_SOC_BIAS_STANDBY;
break;
case SND_SOC_DAPM_STREAM_NOP:
switch (dapm->bias_level) {
case SND_SOC_BIAS_STANDBY:
case SND_SOC_BIAS_OFF:
dapm->dev_power = 0;
break;
default:
dapm->dev_power = 1;
break;
}
dapm->target_bias_level = dapm->bias_level;
break;
default:
break;
......@@ -1186,12 +1192,12 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
}
/* Force all contexts in the card to the same bias state */
power = 0;
bias = SND_SOC_BIAS_OFF;
list_for_each_entry(d, &card->dapm_list, list)
if (d->dev_power)
power = 1;
if (d->target_bias_level > bias)
bias = d->target_bias_level;
list_for_each_entry(d, &card->dapm_list, list)
d->dev_power = power;
d->target_bias_level = bias;
/* Run all the bias changes in parallel */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment