x86: io-apic - do not use KERN_DEBUG marker too much, fix

Yinghai Lu reported:

| >  0 add_pin_to_irq: irq 15 --> apic 0 pin 15
| > IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
| >  8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 (apicid-pin) not connected
| >  9-0 9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15
| > 9-16 9-17 9-18 9-19 9-20 9-21 9-22 9-23 (apicid-pin) not connected
| >
|
| only first one not connected at first, and ...

here is a quick fix for this.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/kernel/io_apic.c

@@ -1541,6 +1541,11 @@ static void __init setup_IO_APIC_irqs(void)
 						pin);
 				continue;
 			}
+			if (notcon) {
+				apic_printk(APIC_VERBOSE,
+					" (apicid-pin) not connected\n");
+				notcon = 0;
+			}
 
 			irq = pin_2_irq(idx, apic, pin);
 #ifdef CONFIG_X86_32
@@ -1552,11 +1557,6 @@ static void __init setup_IO_APIC_irqs(void)
 			setup_IO_APIC_irq(apic, pin, irq,
 					irq_trigger(idx), irq_polarity(idx));
 		}
-		if (notcon) {
-			apic_printk(APIC_VERBOSE,
-				" (apicid-pin) not connected\n");
-			notcon = 0;
-		}
 	}
 
 	if (notcon)