Commit 57c4d7b4 authored by Johannes Berg's avatar Johannes Berg Committed by John W. Linville

mac80211: clean up beacon interval settings

We currently have two beacon interval configuration knobs:
hw.conf.beacon_int and vif.bss_info.beacon_int. This is
rather confusing, even though the former is used when we
beacon ourselves and the latter when we are associated to
an AP.

This just deprecates the hw.conf.beacon_int setting in favour
of always using vif.bss_info.beacon_int. Since it touches all
the beaconing IBSS code anyway, we can also add support for
the cfg80211 IBSS beacon interval configuration easily.

NOTE: The hw.conf.beacon_int setting is retained for now due
      to drivers still using it -- I couldn't untangle all
      drivers, some are updated in this patch.
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent f3b85252
......@@ -316,9 +316,9 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
u32 v = 0;
u32 pretbtt = 0;
v |= ar->hw->conf.beacon_int;
if (ar->vif) {
v |= ar->vif->bss_conf.beacon_int;
switch (ar->vif->type) {
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_ADHOC:
......@@ -326,7 +326,7 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
break;
case NL80211_IFTYPE_AP:
v |= BIT(24);
pretbtt = (ar->hw->conf.beacon_int - 6) << 16;
pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16;
break;
default:
break;
......
......@@ -1337,7 +1337,7 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
goto out;
}
if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) {
if (changed & BSS_CHANGED_BEACON_INT) {
err = ar9170_set_beacon_timers(ar);
if (err)
goto out;
......@@ -1499,6 +1499,9 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
#endif /* CONFIG_AR9170_LEDS */
}
if (changed & BSS_CHANGED_BEACON_INT)
err = ar9170_set_beacon_timers(ar);
if (changed & BSS_CHANGED_HT) {
/* TODO */
err = 0;
......
......@@ -2756,7 +2756,6 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
mutex_lock(&sc->lock);
sc->bintval = conf->beacon_int;
sc->power_level = conf->power_level;
ret = ath5k_chan_set(sc, conf->channel);
......@@ -3083,6 +3082,10 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
u32 changes)
{
struct ath5k_softc *sc = hw->priv;
if (changes & BSS_CHANGED_BEACON_INT)
sc->bintval = bss_conf->beacon_int;
if (changes & BSS_CHANGED_ASSOC) {
mutex_lock(&sc->lock);
sc->assoc = bss_conf->assoc;
......
......@@ -590,6 +590,8 @@ struct ath_softc {
int led_on_cnt;
int led_off_cnt;
int beacon_interval;
struct ath_rfkill rf_kill;
struct ath_ani ani;
struct ath9k_node_stats nodestats;
......
......@@ -320,8 +320,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
u64 tsfadjust;
int intval;
intval = sc->hw->conf.beacon_int ?
sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
/*
* Calculate the TSF offset for this beacon slot, i.e., the
......@@ -431,8 +430,7 @@ void ath_beacon_tasklet(unsigned long data)
* on the tsf to safeguard against missing an swba.
*/
intval = sc->hw->conf.beacon_int ?
sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
tsf = ath9k_hw_gettsf64(ah);
tsftu = TSF_TO_TU(tsf>>32, tsf);
......@@ -711,8 +709,7 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
/* Setup the beacon configuration parameters */
memset(&conf, 0, sizeof(struct ath_beacon_config));
conf.beacon_interval = sc->hw->conf.beacon_int ?
sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
conf.beacon_interval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
conf.listen_interval = 1;
conf.dtim_period = conf.beacon_interval;
conf.dtim_count = 1;
......
......@@ -2358,16 +2358,6 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->config.txpowlimit = 2 * conf->power_level;
/*
* The HW TSF has to be reset when the beacon interval changes.
* We set the flag here, and ath_beacon_config_ap() would take this
* into account when it gets called through the subsequent
* config_interface() call - with IFCC_BEACON in the changed field.
*/
if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
sc->sc_flags |= SC_OP_TSF_RESET;
mutex_unlock(&sc->mutex);
return 0;
......@@ -2635,6 +2625,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
ath9k_bss_assoc_info(sc, vif, bss_conf);
}
/*
* The HW TSF has to be reset when the beacon interval changes.
* We set the flag here, and ath_beacon_config_ap() would take this
* into account when it gets called through the subsequent
* config_interface() call - with IFCC_BEACON in the changed field.
*/
if (changed & BSS_CHANGED_BEACON_INT) {
sc->sc_flags |= SC_OP_TSF_RESET;
sc->beacon_interval = bss_conf->beacon_int;
}
mutex_unlock(&sc->mutex);
}
......
......@@ -971,7 +971,7 @@ int ath_cabq_update(struct ath_softc *sc)
else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
qi.tqi_readyTime = (sc->hw->conf.beacon_int *
qi.tqi_readyTime = (sc->beacon_interval *
sc->config.cabqReadytime) / 100;
ath_txq_update(sc, qnum, &qi);
......
......@@ -3468,11 +3468,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
if (phy->ops->set_rx_antenna)
phy->ops->set_rx_antenna(dev, antenna);
/* Update templates for AP/mesh mode. */
if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
b43_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
......@@ -3556,6 +3551,13 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
goto out_unlock_mutex;
b43_mac_suspend(dev);
/* Update templates for AP/mesh mode. */
if (changed & BSS_CHANGED_BEACON_INT &&
(b43_is_mode(wl, NL80211_IFTYPE_AP) ||
b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
b43_set_beacon_int(dev, conf->beacon_int);
if (changed & BSS_CHANGED_BASIC_RATES)
b43_update_basic_rates(dev, conf->basic_rates);
......
......@@ -2721,11 +2721,6 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
/* Update templates for AP mode. */
if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
b43legacy_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
b43legacy_radio_turn_on(dev);
......@@ -2827,6 +2822,11 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
b43legacy_mac_suspend(dev);
if (changed & BSS_CHANGED_BEACON_INT &&
(b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
b43legacy_set_beacon_int(dev, conf->beacon_int);
if (changed & BSS_CHANGED_BASIC_RATES)
b43legacy_update_basic_rates(dev, conf->basic_rates);
......
......@@ -567,7 +567,8 @@ static void iwl_setup_rxon_timing(struct iwl_priv *priv)
beacon_int = iwl_adjust_beacon_interval(priv->beacon_int);
priv->rxon_timing.atim_window = 0;
} else {
beacon_int = iwl_adjust_beacon_interval(conf->beacon_int);
beacon_int = iwl_adjust_beacon_interval(
priv->vif->bss_conf.beacon_int);
/* TODO: we need to get atim_window from upper stack
* for now we set to 0 */
......
......@@ -1313,7 +1313,6 @@ int iwl_setup_mac(struct iwl_priv *priv)
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
hw->conf.beacon_int = 100;
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
......@@ -2751,7 +2750,7 @@ void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
priv->ibss_beacon = NULL;
priv->beacon_int = priv->hw->conf.beacon_int;
priv->beacon_int = priv->vif->bss_conf.beacon_int;
priv->timestamp = 0;
if ((priv->iw_mode == NL80211_IFTYPE_STATION))
priv->beacon_int = 0;
......
......@@ -551,7 +551,8 @@ static void iwl3945_setup_rxon_timing(struct iwl_priv *priv)
priv->rxon_timing.atim_window = 0;
} else {
priv->rxon_timing.beacon_interval =
iwl3945_adjust_beacon_interval(conf->beacon_int);
iwl3945_adjust_beacon_interval(
priv->vif->bss_conf.beacon_int);
/* TODO: we need to get atim_window from upper stack
* for now we set to 0 */
priv->rxon_timing.atim_window = 0;
......@@ -4211,8 +4212,6 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
hw->conf.beacon_int = 100;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->bands[IEEE80211_BAND_2GHZ];
......
......@@ -380,7 +380,7 @@ static int lbtf_op_config_interface(struct ieee80211_hw *hw,
if (beacon) {
lbtf_beacon_set(priv, beacon);
kfree_skb(beacon);
lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int);
lbtf_beacon_ctrl(priv, 1, vif->bss_conf.beacon_int);
}
break;
default:
......
......@@ -553,18 +553,13 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
struct mac80211_hwsim_data *data = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n",
printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d)\n",
wiphy_name(hw->wiphy), __func__,
conf->channel->center_freq, conf->radio_enabled,
conf->beacon_int);
conf->channel->center_freq, conf->radio_enabled);
data->channel = conf->channel;
data->radio_enabled = conf->radio_enabled;
data->beacon_int = 1024 * conf->beacon_int / 1000 * HZ / 1000;
if (data->beacon_int < 1)
data->beacon_int = 1;
if (!data->started || !data->radio_enabled)
if (!data->started || !data->radio_enabled || !data->beacon_int)
del_timer(&data->beacon_timer);
else
mod_timer(&data->beacon_timer, jiffies + data->beacon_int);
......@@ -615,6 +610,7 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
u32 changed)
{
struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
struct mac80211_hwsim_data *data = hw->priv;
hwsim_check_magic(vif);
......@@ -628,6 +624,14 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
vp->aid = info->aid;
}
if (changed & BSS_CHANGED_BEACON_INT) {
printk(KERN_DEBUG " %s: BCNINT: %d\n",
wiphy_name(hw->wiphy), info->beacon_int);
data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
if (WARN_ON(data->beacon_int))
data->beacon_int = 1;
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
printk(KERN_DEBUG " %s: ERP_CTS_PROT: %d\n",
wiphy_name(hw->wiphy), info->use_cts_prot);
......
......@@ -149,6 +149,7 @@ struct ieee80211_low_level_stats {
* @BSS_CHANGED_ERP_SLOT: slot timing changed
* @BSS_CHANGED_HT: 802.11n parameters changed
* @BSS_CHANGED_BASIC_RATES: Basic rateset changed
* @BSS_CHANGED_BEACON_INT: Beacon interval changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
......@@ -157,6 +158,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_ERP_SLOT = 1<<3,
BSS_CHANGED_HT = 1<<4,
BSS_CHANGED_BASIC_RATES = 1<<5,
BSS_CHANGED_BEACON_INT = 1<<6,
};
/**
......@@ -529,7 +531,7 @@ enum ieee80211_conf_flags {
* enum ieee80211_conf_changed - denotes which configuration changed
*
* @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
* @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
* @_IEEE80211_CONF_CHANGE_BEACON_INTERVAL: DEPRECATED
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
......@@ -539,7 +541,7 @@ enum ieee80211_conf_flags {
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
_IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
......@@ -548,6 +550,14 @@ enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
};
static inline __deprecated enum ieee80211_conf_changed
__IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void)
{
return _IEEE80211_CONF_CHANGE_BEACON_INTERVAL;
}
#define IEEE80211_CONF_CHANGE_BEACON_INTERVAL \
__IEEE80211_CONF_CHANGE_BEACON_INTERVAL()
/**
* struct ieee80211_conf - configuration of the device
*
......
......@@ -451,18 +451,11 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
* This is a kludge. beacon interval should really be part
* of the beacon information.
*/
if (params->interval && (sdata->local->hw.conf.beacon_int !=
params->interval)) {
sdata->local->hw.conf.beacon_int = params->interval;
err = ieee80211_hw_config(sdata->local,
IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
if (err < 0)
return err;
/*
* We updated some parameter so if below bails out
* it's not an error.
*/
err = 0;
if (params->interval &&
(sdata->vif.bss_conf.beacon_int != params->interval)) {
sdata->vif.bss_conf.beacon_int = params->interval;
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_INT);
}
/* Need to have a beacon head if we don't have one yet */
......
......@@ -73,6 +73,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt;
u8 *pos;
struct ieee80211_supported_band *sband;
u32 bss_change;
if (local->ops->reset_tsf) {
/* Reset own TSF to allow time synchronization work. */
......@@ -92,8 +93,6 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
memcpy(ifibss->bssid, bssid, ETH_ALEN);
local->hw.conf.beacon_int = beacon_int >= 10 ? beacon_int : 10;
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
......@@ -101,6 +100,12 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
local->oper_channel = chan;
local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
sdata->vif.bss_conf.beacon_int = beacon_int;
bss_change = BSS_CHANGED_BEACON_INT;
bss_change |= ieee80211_reset_erp_info(sdata);
ieee80211_bss_info_change_notify(sdata, bss_change);
sband = local->hw.wiphy->bands[chan->band];
/* Build IBSS probe response */
......@@ -111,7 +116,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
memset(mgmt->da, 0xff, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN);
mgmt->u.beacon.beacon_int = cpu_to_le16(local->hw.conf.beacon_int);
mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int);
mgmt->u.beacon.timestamp = cpu_to_le64(tsf);
mgmt->u.beacon.capab_info = cpu_to_le16(capability);
......@@ -181,8 +186,13 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss *bss)
{
u16 beacon_int = bss->cbss.beacon_interval;
if (beacon_int < 10)
beacon_int = 10;
__ieee80211_sta_join_ibss(sdata, bss->cbss.bssid,
bss->cbss.beacon_interval,
beacon_int,
bss->cbss.channel,
bss->supp_rates_len, bss->supp_rates,
bss->cbss.capability,
......@@ -464,9 +474,6 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
sband = local->hw.wiphy->bands[ifibss->channel->band];
if (local->hw.conf.beacon_int == 0)
local->hw.conf.beacon_int = 100;
capability = WLAN_CAPABILITY_IBSS;
if (sdata->default_key)
......@@ -480,7 +487,7 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
*pos++ = (u8) (rate / 5);
}
__ieee80211_sta_join_ibss(sdata, bssid, local->hw.conf.beacon_int,
__ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
ifibss->channel, sband->n_bitrates,
supp_rates, capability, 0);
}
......@@ -823,6 +830,8 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
} else
sdata->u.ibss.fixed_bssid = false;
sdata->vif.bss_conf.beacon_int = params->beacon_interval;
sdata->u.ibss.channel = params->channel;
sdata->u.ibss.fixed_channel = params->channel_fixed;
......
......@@ -294,9 +294,6 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_local *local = sdata->local;
if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
return;
if (!changed)
return;
......@@ -305,6 +302,17 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
&sdata->vif,
&sdata->vif.bss_conf,
changed);
/*
* DEPRECATED
*
* ~changed is just there to not do this at resume time
*/
if (changed & BSS_CHANGED_BEACON_INT && ~changed) {
local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
ieee80211_hw_config(local,
_IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
}
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
......@@ -971,9 +979,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
debugfs_hw_add(local);
if (local->hw.conf.beacon_int < 10)
local->hw.conf.beacon_int = 100;
if (local->hw.max_listen_interval == 0)
local->hw.max_listen_interval = 1;
......
......@@ -842,6 +842,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
sdata->vif.bss_conf.dtim_period = bss->dtim_period;
bss_info_changed |= BSS_CHANGED_BEACON_INT;
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
bss->cbss.capability, bss->has_erp_value, bss->erp_value);
......
......@@ -543,9 +543,8 @@ void sta_info_unlink(struct sta_info **sta)
spin_unlock_irqrestore(&local->sta_lock, flags);
}
static inline int sta_info_buffer_expired(struct ieee80211_local *local,
struct sta_info *sta,
struct sk_buff *skb)
static int sta_info_buffer_expired(struct sta_info *sta,
struct sk_buff *skb)
{
struct ieee80211_tx_info *info;
int timeout;
......@@ -556,8 +555,9 @@ static inline int sta_info_buffer_expired(struct ieee80211_local *local,
info = IEEE80211_SKB_CB(skb);
/* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */
timeout = (sta->listen_interval * local->hw.conf.beacon_int * 32 /
15625) * HZ;
timeout = (sta->listen_interval *
sta->sdata->vif.bss_conf.beacon_int *
32 / 15625) * HZ;
if (timeout < STA_TX_BUFFER_EXPIRE)
timeout = STA_TX_BUFFER_EXPIRE;
return time_after(jiffies, info->control.jiffies + timeout);
......@@ -577,7 +577,7 @@ static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local,
for (;;) {
spin_lock_irqsave(&sta->ps_tx_buf.lock, flags);
skb = skb_peek(&sta->ps_tx_buf);
if (sta_info_buffer_expired(local, sta, skb))
if (sta_info_buffer_expired(sta, skb))
skb = __skb_dequeue(&sta->ps_tx_buf);
else
skb = NULL;
......
......@@ -2132,7 +2132,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
/* BSSID is left zeroed, wildcard value */
mgmt->u.beacon.beacon_int =
cpu_to_le16(local->hw.conf.beacon_int);
cpu_to_le16(sdata->vif.bss_conf.beacon_int);
mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
pos = skb_put(skb, 2);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment