Commit 5878524e authored by Georgii Staroselskii's avatar Georgii Staroselskii Committed by Maxime Ripard

arm64: dts: allwinner: bluetooth for Emlid Neutis N5

The Emlid Neutis N5 board has AP6212 BT+WiFi chip. This patch is in
line with 8558c6e2 ("ARM: dts: sun8i: h3: bluetooth for Banana Pi
M2 Zero board") and other commits that add Bluetooth support for
similar boards.
Signed-off-by: default avatarGeorgii Staroselskii <georgii.staroselskii@emlid.com>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
parent 6d1aa40e
...@@ -23,6 +23,8 @@ wifi_pwrseq: wifi_pwrseq { ...@@ -23,6 +23,8 @@ wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple"; compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>; post-power-on-delay-ms = <200>;
clocks = <&rtc 1>;
clock-names = "ext_clock";
}; };
}; };
...@@ -56,5 +58,16 @@ &mmc2 { ...@@ -56,5 +58,16 @@ &mmc2 {
&uart1 { &uart1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
uart-has-rtscts;
status = "okay"; status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rtc 1>;
clock-names = "lpo";
vbat-supply = <&reg_vcc3v3>;
vddio-supply = <&reg_vcc3v3>;
shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
};
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment