ARM: OMAP3: clock data: fill in some missing clockdomains

Several clocks are missing clockdomains.  This can cause problems with
the hwmod and power management code.  Fill these in.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>

arch/arm/mach-omap2/clock3xxx_data.c

@@ -1394,6 +1394,7 @@ static struct clk cpefuse_fck = {
 	.name		= "cpefuse_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1403,6 +1404,7 @@ static struct clk ts_fck = {
 	.name		= "ts_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_32k_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1412,6 +1414,7 @@ static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll5_m2_ck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -1617,6 +1620,7 @@ static struct clk fshostusb_fck = {
 	.name		= "fshostusb_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_48m_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2043,6 +2047,7 @@ static struct clk omapctrl_ick = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
 	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2094,6 +2099,7 @@ static struct clk usb_l4_ick = {
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
 	.clksel		= usb_l4_clksel,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };