ARM: OMAP2+: Remove unused legacy code for io.c

We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/io.c

@@ -493,67 +493,39 @@ void __init omap3_init_early(void)
 	omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
 			       OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
-	/* XXX: remove these once OMAP3 is DT only */
-	if (!of_have_populated_dt()) {
-		omap2_set_globals_control(
-			OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE));
-		omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
-		omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
-				     NULL);
-	}
 	omap2_control_base_init();
 	omap3xxx_check_revision();
 	omap3xxx_check_features();
 	omap2_prcm_base_init();
-	/* XXX: remove these once OMAP3 is DT only */
-	if (!of_have_populated_dt()) {
-		omap3xxx_prm_init(NULL);
-		omap3xxx_cm_init(NULL);
-	}
 	omap3xxx_voltagedomains_init();
 	omap3xxx_powerdomains_init();
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	if (!of_have_populated_dt()) {
-		omap3_control_legacy_iomap_init();
-		if (soc_is_am35xx())
-			omap_clk_soc_init = am35xx_clk_legacy_init;
-		else if (cpu_is_omap3630())
-			omap_clk_soc_init = omap36xx_clk_legacy_init;
-		else if (omap_rev() == OMAP3430_REV_ES1_0)
-			omap_clk_soc_init = omap3430es1_clk_legacy_init;
-		else
-			omap_clk_soc_init = omap3430_clk_legacy_init;
-	}
 }
 
 void __init omap3430_init_early(void)
 {
 	omap3_init_early();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = omap3430_dt_clk_init;
+	omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap35xx_init_early(void)
 {
 	omap3_init_early();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = omap3430_dt_clk_init;
+	omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
 void __init omap3630_init_early(void)
 {
 	omap3_init_early();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = omap3630_dt_clk_init;
+	omap_clk_soc_init = omap3630_dt_clk_init;
 }
 
 void __init am35xx_init_early(void)
 {
 	omap3_init_early();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = am35xx_dt_clk_init;
+	omap_clk_soc_init = am35xx_dt_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -628,8 +600,7 @@ void __init ti816x_init_early(void)
 	ti816x_clockdomains_init();
 	dm816x_hwmod_init();
 	omap_hwmod_init_postsetup();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = dm816x_dt_clk_init;
+	omap_clk_soc_init = dm816x_dt_clk_init;
 }
 #endif
 
@@ -785,21 +756,19 @@ int __init omap_clk_init(void)
 
 	omap2_clk_setup_ll_ops();
 
-	if (of_have_populated_dt()) {
-		ret = omap_control_init();
-		if (ret)
-			return ret;
+	ret = omap_control_init();
+	if (ret)
+		return ret;
 
-		ret = omap_prcm_init();
-		if (ret)
-			return ret;
+	ret = omap_prcm_init();
+	if (ret)
+		return ret;
 
-		of_clk_init(NULL);
+	of_clk_init(NULL);
 
-		ti_dt_clk_init_retry_clks();
+	ti_dt_clk_init_retry_clks();
 
-		ti_dt_clockdomains_setup();
-	}
+	ti_dt_clockdomains_setup();
 
 	ret = omap_clk_soc_init();