ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes

Previous patches switched the ECAP and EPWM to use the new bindings.
These bindings explicitly adds the various required clocks via DT rather
than depending on hwmod.

Therefore, it is safe to remove the hwmod entries since they are no longer
needed.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Documentation/devicetree/bindings/pwm/pwm-tiecap.txt

@@ -11,8 +11,6 @@ Required properties:
 - reg: physical base address and size of the registers map.
 
 Optional properties:
-- ti,hwmods: Name of the hwmod associated to the ECAP:
-  "ecap<x>", <x> being the 0-based instance number from the HW spec
 - clocks: Handle to the ECAP's functional clock.
 - clock-names: Must be set to "fck".
 
@@ -22,7 +20,6 @@ ecap0: ecap@48300100 { /* ECAP on am33xx */
 	compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
 	reg = <0x48300100 0x80>;
-	ti,hwmods = "ecap0";
 	clocks = <&l4ls_gclk>;
 	clock-names = "fck";
 };

Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt

@@ -11,8 +11,6 @@ Required properties:
 - reg: physical base address and size of the registers map.
 
 Optional properties:
-- ti,hwmods: Name of the hwmod associated to the EHRPWM:
-  "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
 - clocks: Handle to the PWM's time-base and functional clock.
 - clock-names: Must be set to "tbclk" and "fck".
 
@@ -24,7 +22,6 @@ ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
 	reg = <0x48300200 0x100>;
 	clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
 	clock-names = "tbclk", "fck";
-	ti,hwmods = "ehrpwm0";
 };
 
 ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */

arch/arm/boot/dts/am33xx.dtsi

@@ -687,7 +687,6 @@ ecap0: ecap@48300100 {
 				clock-names = "fck";
 				interrupts = <31>;
 				interrupt-names = "ecap0";
-				ti,hwmods = "ecap0";
 				status = "disabled";
 			};
 
@@ -696,7 +695,6 @@ ehrpwm0: pwm@48300200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
 				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";
@@ -723,7 +721,6 @@ ecap1: ecap@48302100 {
 				clock-names = "fck";
 				interrupts = <47>;
 				interrupt-names = "ecap1";
-				ti,hwmods = "ecap1";
 				status = "disabled";
 			};
 
@@ -732,7 +729,6 @@ ehrpwm1: pwm@48302200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
 				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";
@@ -759,7 +755,6 @@ ecap2: ecap@48304100 {
 				clock-names = "fck";
 				interrupts = <61>;
 				interrupt-names = "ecap2";
-				ti,hwmods = "ecap2";
 				status = "disabled";
 			};
 
@@ -768,7 +763,6 @@ ehrpwm2: pwm@48304200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
 				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";

arch/arm/boot/dts/am4372.dtsi

@@ -677,7 +677,6 @@ ecap0: ecap@48300100 {
 					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48300100 0x80>;
-				ti,hwmods = "ecap0";
 				clocks = <&l4ls_gclk>;
 				clock-names = "fck";
 				status = "disabled";
@@ -689,7 +688,6 @@ ehrpwm0: pwm@48300200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
 				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";
@@ -711,7 +709,6 @@ ecap1: ecap@48302100 {
 					     "ti,am33xx-ecap";
 				#pwm-cells = <3>;
 				reg = <0x48302100 0x80>;
-				ti,hwmods = "ecap1";
 				clocks = <&l4ls_gclk>;
 				clock-names = "fck";
 				status = "disabled";
@@ -723,7 +720,6 @@ ehrpwm1: pwm@48302200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
 				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";
@@ -747,7 +743,6 @@ ecap2: ecap@48304100 {
 				reg = <0x48304100 0x80>;
 				clocks = <&l4ls_gclk>;
 				clock-names = "fck";
-				ti,hwmods = "ecap2";
 				status = "disabled";
 			};
 
@@ -757,7 +752,6 @@ ehrpwm2: pwm@48304200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
 				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";
@@ -779,7 +773,6 @@ ehrpwm3: pwm@48306200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48306200 0x80>;
-				ti,hwmods = "ehrpwm3";
 				clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";
@@ -801,7 +794,6 @@ ehrpwm4: pwm@48308200 {
 					     "ti,am33xx-ehrpwm";
 				#pwm-cells = <3>;
 				reg = <0x48308200 0x80>;
-				ti,hwmods = "ehrpwm4";
 				clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
 				status = "disabled";
@@ -825,7 +817,6 @@ ehrpwm5: pwm@4830a200 {
 				reg = <0x4830a200 0x80>;
 				clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
 				clock-names = "tbclk", "fck";
-				ti,hwmods = "ehrpwm5";
 				status = "disabled";
 			};
 		};