Commit 58fc2ea4 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[BNX2]: Print management firmware version.

Add management firmware version for ethtool -i.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent df149d70
......@@ -5546,11 +5546,7 @@ bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
strcpy(info->bus_info, pci_name(bp->pdev));
info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0';
info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0';
info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0';
info->fw_version[1] = info->fw_version[3] = '.';
info->fw_version[5] = 0;
strcpy(info->fw_version, bp->fw_version);
}
#define BNX2_REGDUMP_LEN (32 * 1024)
......@@ -6462,7 +6458,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
{
struct bnx2 *bp;
unsigned long mem_len;
int rc;
int rc, i, j;
u32 reg;
u64 dma_mask, persist_dma_mask;
......@@ -6619,7 +6615,35 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
goto err_out_unmap;
}
bp->fw_ver = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
reg = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
for (i = 0, j = 0; i < 3; i++) {
u8 num, k, skip0;
num = (u8) (reg >> (24 - (i * 8)));
for (k = 100, skip0 = 1; k >= 1; num %= k, k /= 10) {
if (num >= k || !skip0 || k == 1) {
bp->fw_version[j++] = (num / k) + '0';
skip0 = 0;
}
}
if (i != 2)
bp->fw_version[j++] = '.';
}
reg = REG_RD_IND(bp, bp->shmem_base + BNX2_BC_STATE_CONDITION);
reg &= BNX2_CONDITION_MFW_RUN_MASK;
if (reg != BNX2_CONDITION_MFW_RUN_UNKNOWN &&
reg != BNX2_CONDITION_MFW_RUN_NONE) {
int i;
u32 addr = REG_RD_IND(bp, bp->shmem_base + BNX2_MFW_VER_PTR);
bp->fw_version[j++] = ' ';
for (i = 0; i < 3; i++) {
reg = REG_RD_IND(bp, addr + i * 4);
reg = swab32(reg);
memcpy(&bp->fw_version[j], &reg, 4);
j += 4;
}
}
reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_UPPER);
bp->mac_addr[0] = (u8) (reg >> 8);
......
......@@ -6660,7 +6660,7 @@ struct bnx2 {
u32 shmem_base;
u32 fw_ver;
char fw_version[32];
int pm_cap;
int pcix_cap;
......@@ -7036,6 +7036,8 @@ struct fw_info {
#define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff
#define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000
#define BNX2_MFW_VER_PTR 0x00000014c
#define BNX2_BC_STATE_RESET_TYPE 0x000001c0
#define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254
#define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff
......@@ -7089,6 +7091,14 @@ struct fw_info {
#define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600)
#define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700)
#define BNX2_BC_STATE_CONDITION 0x000001c8
#define BNX2_CONDITION_MFW_RUN_UNKNOWN 0x00000000
#define BNX2_CONDITION_MFW_RUN_IPMI 0x00002000
#define BNX2_CONDITION_MFW_RUN_UMP 0x00004000
#define BNX2_CONDITION_MFW_RUN_NCSI 0x00006000
#define BNX2_CONDITION_MFW_RUN_NONE 0x0000e000
#define BNX2_CONDITION_MFW_RUN_MASK 0x0000e000
#define BNX2_BC_STATE_DEBUG_CMD 0x1dc
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment