Merge bk://linuxusb@bkbits.net/linus-2.5

into kroah.com:/home/greg/linux/BK/g-2.5

Documentation/usb/dc2xx.txt

-14 April 2000
-david-b@pacbell.net
-
-This is an overview of how to use the "dc2xx" USB driver with certain
-digital still cameras from Kodak and other vendors.
-
-
-CAMERAS
-
-This driver will mostly be used with Kodak DC-2xx series digital still
-cameras, but it should be trivial to tell it about several non-Kodak
-USB-enabled cameras.
-
-You'll most likely want to hook it up to recent versions of "gPhoto"
-(www.gphoto.org), since version 0.4 and later know how to use it to talk
-to Kodak DC-240 and DC-280 cameras over USB.
-
-In addition the DC-220, DC-260, DC-265, and DC-290 are also recognized.
-However, like other cameras using the "Digita OS" (from www.flashpoint.com)
-there is no gPhoto support for this camera.  There is a python script
-for accessing these cameras (see archives of the linux-usb mailing list)
-and a "Digita Services" library that can also use this driver.
-
-The HP PhotoSmart C500 should also work, since it's another Digita camera
-with USB support.
-
-
-USB HARDWARE
-
-Recent kernels have had no particular problems using this driver with
-either OHCI or UHCI chipsets, and have worked on the PowerMac platform.
-
-Note that in some cases changes in BIOS settings may be needed before
-your USB works.  At least one user has reported a need for SMP-related 
-settings as well, and some old hardware may not handle USB correctly.
-
-
-SETUP
-
-Configure in the DC2XX USB driver, and have it in your kernel.  It works
-as a module, or compiled in directly.
-
-Create at least one device, perhaps like this (both read and write):
-
-    # mknod -m 0660 /dev/usb/dc2xx0 c 180 80
-    # mknod -m 0660 /dev/usb/dc2xx1 c 180 81
-    ...
-
-NOTE:  you would normally configure PAM so that the user logged in at
-the console is granted ownership of these devices.  console.perms(5)
-explains how to do this.
-
-The driver supports multiple device nodes.  The USB framework supports
-a maximum of sixteen device nodes (up to minor device number 96).
-
-When you plug in one camera, it will use the first device node (dc2xx0
-in the example above).  A second camera will use the second device node,
-and so on.
-
-
-SANITY TESTING
-
-First:  if you've got /proc support, make sure that the driver has hooked
-itself up correctly.
-
-    - You should see an entry in /proc/bus/usb/drivers for "dc2xx",
-      if you enabled USB /proc support and correctly mounted the
-      usbdevfs on /proc/bus/usb.
-
-Second:  when you connect your camera to the computer, does it get recognized
-by the driver?  (Make sure the camera is powered on!)
-
-    - if you've got /proc/bus/usb/devices, you should see an entry
-      something like this.  The "ProdID" may be different if you didn't
-      plug in a DC-240, as may the strings presented, but "Driver=dc2xx"
-      had better be there.
-
-	T:  Lev=01 Prnt=00 Port=00 Cnt=01 Dev#=  1 Spd=12  MxCh= 0
-	D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
-	P:  Vendor=040a ProdID=0120 Rev= 1.08
-	S:  Manufacturer=Eastman Kodak Company
-	S:  Product=KODAK DC240 Zoom Digital Camera
-	C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
-	I:  If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=dc2xx
-	E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
-	E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
-
-    - see if "dmesg" output tells you that you plugged in your camera.
-
-	Manufacturer: Eastman Kodak Company
-	Product: KODAK DC240 Zoom Digital Camera
-	dc2xx.c: USB Camera #0 connected
-
-Third:  (optional) can you use gPhoto to talk to the camera?
-
-    - When you configure your camera, tell it to use "/dev/usb/dc2xx0"
-      (or whatever name you used).  Right now, gPhoto emits a diagnostic
-      message (non-GUI) saying that it since it didn't act like a TTY,
-      it's assuming it's got a USB connection.
-
-    - With the camera turned on, get the "camera summary".  It'll
-      talk to the camera -- and tell you you're using USB.
-
-If you got that far, you should be able to use everything fine.
-
-
-ADDITIONAL INFORMATION
-
-You may find that you need more driver-specific information, which is
-currently accessible through a link from http://www.linux-usb.org/
-along with other Linux USB resources.

drivers/usb/class/audio.c

@@ -3571,7 +3571,7 @@ static void usb_audio_recurseunit(struct consmixstate *state, unsigned char unit
 		return;		
 
 	case PROCESSING_UNIT:
-		if (p1[0] < 13 || p1[0] < 13+p1[6] || p1[0] < 13+p1[6]+p1[11+p1[6]] || p1[0] < 13+p1[6]+p1[11+p1[6]]+p1[13+p1[6]+p1[11+p1[6]]]) {
+		if (p1[0] < 13 || p1[0] < 13+p1[6] || p1[0] < 13+p1[6]+p1[11+p1[6]]) {
 			printk(KERN_ERR "usbaudio: unit %u: invalid PROCESSING_UNIT descriptor\n", unitid);
 			return;
 		}

drivers/usb/core/devio.c

@@ -297,7 +297,9 @@ static void destroy_all_async(struct dev_state *ps)
 }
 
 /*
- * interface claiming
+ * interface claims are made only at the request of user level code,
+ * which can also release them (explicitly or by closing files).
+ * they're also undone when devices disconnect.
  */
 
 static void *driver_probe(struct usb_device *dev, unsigned int intf,
@@ -310,8 +312,20 @@ static void driver_disconnect(struct usb_device *dev, void *context)
 {
 	struct dev_state *ps = (struct dev_state *)context;
 
-	if (ps)
-		ps->ifclaimed = 0;
+	if (!ps)
+		return;
+
+	/* this waits till synchronous requests complete */
+	down_write (&ps->devsem);
+
+	/* prevent new I/O requests */
+	ps->dev = 0;
+	ps->ifclaimed = 0;
+
+	/* force async requests to complete */
+	destroy_all_async (ps);
+
+	up_write (&ps->devsem);
 }
 
 struct usb_driver usbdevfs_driver = {

drivers/usb/core/hcd.c

@@ -310,7 +310,7 @@ static int rh_string (
 
 	// serial number
 	} else if (id == 1) {
-		strcpy (buf, hcd->bus_name);
+		strcpy (buf, hcd->self.bus_name);
 
 	// product description
 	} else if (id == 2) {
@@ -406,7 +406,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
 		// wValue == urb->dev->devaddr
 		dbg ("%s root hub device address %d",
-			hcd->bus_name, wValue);
+			hcd->self.bus_name, wValue);
 		break;
 
 	/* INTERFACE REQUESTS (no defined feature/status flags) */
@@ -520,7 +520,7 @@ static void rh_report_status (unsigned long ptr)
 					&& rh_status_urb (hcd, urb) != 0) {
 				/* another driver snuck in? */
 				dbg ("%s, can't resubmit roothub status urb?",
-					hcd->bus_name);
+					hcd->self.bus_name);
 				spin_unlock_irqrestore (&hcd_data_lock, flags);
 				BUG ();
 			}
@@ -1051,8 +1051,7 @@ int usb_hcd_pci_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	usb_init_bus (&hcd->self);
 	hcd->self.op = &hcd_operations;
 	hcd->self.hcpriv = (void *) hcd;
-	hcd->bus = &hcd->self;
-	hcd->bus_name = dev->slot_name;
+	hcd->self.bus_name = dev->slot_name;
 	hcd->product_desc = dev->name;
 
 	INIT_LIST_HEAD (&hcd->dev_list);
@@ -1089,16 +1088,15 @@ void usb_hcd_pci_remove (struct pci_dev *dev)
 	hcd = pci_get_drvdata(dev);
 	if (!hcd)
 		return;
-	info ("remove: %s, state %x", hcd->bus_name, hcd->state);
+	info ("remove: %s, state %x", hcd->self.bus_name, hcd->state);
 
 	if (in_interrupt ()) BUG ();
 
-	hub = hcd->bus->root_hub;
+	hub = hcd->self.root_hub;
 	hcd->state = USB_STATE_QUIESCING;
 
-	dbg ("%s: roothub graceful disconnect", hcd->bus_name);
+	dbg ("%s: roothub graceful disconnect", hcd->self.bus_name);
 	usb_disconnect (&hub);
-	// usb_disconnect (&hcd->bus->root_hub);
 
 	hcd->driver->stop (hcd);
 	hcd->state = USB_STATE_HALT;
@@ -1113,10 +1111,9 @@ void usb_hcd_pci_remove (struct pci_dev *dev)
 			pci_resource_len (dev, hcd->region));
 	}
 
-	usb_deregister_bus (hcd->bus);
+	usb_deregister_bus (&hcd->self);
 	if (atomic_read (&hcd->self.refcnt) != 1)
-		err ("usb_hcd_pci_remove %s, count != 1", hcd->bus_name);
-	hcd->bus = NULL;
+		err ("usb_hcd_pci_remove %s, count != 1", hcd->self.bus_name);
 
 	hcd->driver->hcd_free (hcd);
 }
@@ -1164,7 +1161,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, u32 state)
 	int			retval;
 
 	hcd = pci_get_drvdata(dev);
-	info ("suspend %s to state %d", hcd->bus_name, state);
+	info ("suspend %s to state %d", hcd->self.bus_name, state);
 
 	pci_save_state (dev, hcd->pci_state);
 
@@ -1193,12 +1190,12 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
 	int			retval;
 
 	hcd = pci_get_drvdata(dev);
-	info ("resume %s", hcd->bus_name);
+	info ("resume %s", hcd->self.bus_name);
 
 	/* guard against multiple resumes (APM bug?) */
 	atomic_inc (&hcd->resume_count);
 	if (atomic_read (&hcd->resume_count) != 1) {
-		err ("concurrent PCI resumes for %s", hcd->bus_name);
+		err ("concurrent PCI resumes for %s", hcd->self.bus_name);
 		retval = 0;
 		goto done;
 	}
@@ -1215,7 +1212,7 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
 
 	retval = hcd->driver->resume (hcd);
 	if (!HCD_IS_RUNNING (hcd->state)) {
-		dbg ("resume %s failure, retval %d", hcd->bus_name, retval);
+		dbg ("resume %s failure, retval %d", hcd->self.bus_name, retval);
 		hc_died (hcd);
 // FIXME:  recover, reset etc.
 	} else {
@@ -1290,7 +1287,7 @@ static void hc_died (struct usb_hcd *hcd)
 		list_for_each (urblist, &dev->urb_list) {
 			urb = list_entry (urblist, struct urb, urb_list);
 			dbg ("shutdown %s urb %p pipe %x, current status %d",
-				hcd->bus_name, urb, urb->pipe, urb->status);
+				hcd->self.bus_name, urb, urb->pipe, urb->status);
 			if (urb->status == -EINPROGRESS)
 				urb->status = -ESHUTDOWN;
 		}
@@ -1534,7 +1531,7 @@ static int hcd_submit_urb (struct urb *urb, int mem_flags)
 	 * since we report some queuing/setup errors ourselves
 	 */
 	urb = usb_get_urb (urb);
-	if (urb->dev == hcd->bus->root_hub)
+	if (urb->dev == hcd->self.root_hub)
 		status = rh_urb_enqueue (hcd, urb);
 	else
 		status = hcd->driver->urb_enqueue (hcd, urb, mem_flags);
@@ -1686,7 +1683,7 @@ if (retval && urb->status == -ENOENT) err ("whoa! retval %d", retval);
 			&& HCD_IS_RUNNING (hcd->state)
 			&& !retval) {
 		dbg ("%s: wait for giveback urb %p",
-			hcd->bus_name, urb);
+			hcd->self.bus_name, urb);
 		wait_for_completion (&splice.done);
 	} else if ((urb->transfer_flags & USB_ASYNC_UNLINK) && retval == 0) {
 		return -EINPROGRESS;
@@ -1698,7 +1695,7 @@ if (retval && urb->status == -ENOENT) err ("whoa! retval %d", retval);
 bye:
 	if (retval)
 		dbg ("%s: hcd_unlink_urb fail %d",
-		    hcd ? hcd->bus_name : "(no bus?)",
+		    hcd ? hcd->self.bus_name : "(no bus?)",
 		    retval);
 	return retval;
 }
@@ -1731,7 +1728,7 @@ static int hcd_free_dev (struct usb_device *udev)
 	/* device driver problem with refcounts? */
 	if (!list_empty (&dev->urb_list)) {
 		dbg ("free busy dev, %s devnum %d (bug!)",
-			hcd->bus_name, udev->devnum);
+			hcd->self.bus_name, udev->devnum);
 		return -EINVAL;
 	}
 

drivers/usb/core/hcd.h

@@ -35,10 +35,8 @@ struct usb_hcd {	/* usb_bus.hcpriv points to this */
 	/*
 	 * housekeeping
 	 */
-	struct usb_bus		*bus;		/* FIXME only use "self" */
 	struct usb_bus		self;		/* hcd is-a bus */
 
-	const char		*bus_name;
 	const char		*product_desc;	/* product/vendor string */
 	const char		*description;	/* "ehci-hcd" etc */
 

drivers/usb/core/hub.c

@@ -765,23 +765,23 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 		 * devices by location for diagnostics, tools, etc.  The
 		 * string is a path along hub ports, from the root.  Each
 		 * device's id will be stable until USB is re-cabled, and
-		 * hubs are often labled with these port numbers.
+		 * hubs are often labeled with these port numbers.
 		 *
-		 * Initial size: "/NN" times five hubs + NUL = 16 bytes max
+		 * Initial size: ".NN" times five hubs + NUL = 16 bytes max
 		 * (quite rare, since most hubs have 4-6 ports).
 		 */
 		pdev = dev->parent;
-		if (pdev->devpath [1] != '\0')	/* parent not root */
+		if (pdev->devpath [0] != '/')	/* parent not root */
 			len = snprintf (dev->devpath, sizeof dev->devpath,
-				"%s/%d", pdev->devpath, port + 1);
-		else	/* root == "/", root port 2 == "/2" */
+				"%s.%d", pdev->devpath, port + 1);
+		else	/* root == "/", root port 2 == "2", port 3 that hub "/2.3" */
 			len = snprintf (dev->devpath, sizeof dev->devpath,
-				"/%d", port + 1);
+				"%d", port + 1);
 		if (len == sizeof dev->devpath)
 			warn ("devpath size! usb/%03d/%03d path %s",
 				dev->bus->busnum, dev->devnum, dev->devpath);
-		info("new USB device on bus %d path %s, assigned address %d",
-			dev->bus->busnum, dev->devpath, dev->devnum);
+		info("new USB device %s-%s, assigned address %d",
+			dev->bus->bus_name, dev->devpath, dev->devnum);
 
 		/* put the device in the global device tree */
 		dev->dev.parent = &dev->parent->dev;
@@ -964,7 +964,7 @@ static int usb_hub_thread(void *__hub)
 	/* Send me a signal to get me die (for debugging) */
 	do {
 		usb_hub_events();
-		interruptible_sleep_on(&khubd_wait);
+		wait_event_interruptible(khubd_wait, !list_empty(&hub_event_list)); 
 	} while (!signal_pending(current));
 
 	dbg("usb_hub_thread exiting");

drivers/usb/core/usb.c

@@ -2407,56 +2407,6 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
 	return err;
 }
 
-/**
- * usb_make_path - returns device path in the hub tree
- * @dev: the device whose path is being constructed
- * @buf: where to put the string
- * @size: how big is "buf"?
- * Context: !in_interrupt ()
- *
- * Returns length of the string (>= 0) or out of memory status (< 0).
- *
- * NOTE:  prefer to use use dev->devpath directly.
- */
-int usb_make_path(struct usb_device *dev, char *buf, size_t size)
-{
-	struct usb_device *pdev = dev->parent;
-	char *tmp;
-	char *port;
-	int i;
-
-	if (!(port = kmalloc(size, GFP_KERNEL)))
-		return -ENOMEM;
-	if (!(tmp = kmalloc(size, GFP_KERNEL))) {
-		kfree(port);
-		return -ENOMEM;
-	}
-
-	*port = 0;
-	while (pdev) {
-		for (i = 0; i < pdev->maxchild; i++)
-			if (pdev->children[i] == dev)
-				break;
-
-		if (pdev->children[i] != dev) {
-			kfree(port);
-			kfree(tmp);
-			return -ENODEV;
-		}
-
-		strcpy(tmp, port);
-		snprintf(port, size, strlen(port) ? "%d.%s" : "%d", i + 1, tmp);
-
-		dev = pdev;
-		pdev = dev->parent;
-	}
-
-	snprintf(buf, size, "usb%d:%s", dev->bus->busnum, port);
-	kfree(port);
-	kfree(tmp);
-	return strlen(buf);
-}
-
 /*
  * By the time we get here, the device has gotten a new device ID
  * and is in the default state. We need to identify the thing and

drivers/usb/host/ehci-dbg.c

@@ -55,7 +55,7 @@ static void dbg_hcs_params (struct ehci_hcd *ehci, char *label)
 			strcat(buf, tmp);
 		}
 		dbg ("%s: %s portroute %s", 
-			ehci->hcd.bus_name, label,
+			ehci->hcd.self.bus_name, label,
 			buf);
 	}
 }

drivers/usb/host/ehci-hcd.c

@@ -248,7 +248,7 @@ static int ehci_start (struct usb_hcd *hcd)
 	ehci->tasklet.data = (unsigned long) ehci;
 
 	/* wire up the root hub */
-	hcd->bus->root_hub = udev = usb_alloc_dev (NULL, hcd->bus);
+	hcd->self.root_hub = udev = usb_alloc_dev (NULL, &hcd->self);
 	if (!udev) {
 done2:
 		ehci_mem_cleanup (ehci);
@@ -288,8 +288,7 @@ static int ehci_start (struct usb_hcd *hcd)
 		while (readl (&ehci->regs->status) & (STS_ASS | STS_PSS))
 			udelay (100);
 		ehci_reset (ehci);
-		// usb_disconnect (udev); 
-		hcd->bus->root_hub = 0;
+		hcd->self.root_hub = 0;
 		usb_free_dev (udev); 
 		retval = -ENODEV;
 		goto done2;
@@ -304,7 +303,7 @@ static void ehci_stop (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
 
-	dbg ("%s: stop", hcd->bus_name);
+	dbg ("%s: stop", hcd->self.bus_name);
 
 	if (hcd->state == USB_STATE_RUNNING)
 		ehci_ready (ehci);
@@ -339,7 +338,7 @@ static int ehci_suspend (struct usb_hcd *hcd, u32 state)
 	int			ports;
 	int			i;
 
-	dbg ("%s: suspend to %d", hcd->bus_name, state);
+	dbg ("%s: suspend to %d", hcd->self.bus_name, state);
 
 	ports = HCS_N_PORTS (ehci->hcs_params);
 
@@ -356,7 +355,7 @@ static int ehci_suspend (struct usb_hcd *hcd, u32 state)
 		if ((temp & PORT_PE) == 0
 				|| (temp & PORT_OWNER) != 0)
 			continue;
-dbg ("%s: suspend port %d", hcd->bus_name, i);
+dbg ("%s: suspend port %d", hcd->self.bus_name, i);
 		temp |= PORT_SUSPEND;
 		writel (temp, &ehci->regs->port_status [i]);
 	}
@@ -380,7 +379,7 @@ static int ehci_resume (struct usb_hcd *hcd)
 	int			ports;
 	int			i;
 
-	dbg ("%s: resume", hcd->bus_name);
+	dbg ("%s: resume", hcd->self.bus_name);
 
 	ports = HCS_N_PORTS (ehci->hcs_params);
 
@@ -400,7 +399,7 @@ static int ehci_resume (struct usb_hcd *hcd)
 		if ((temp & PORT_PE) == 0
 				|| (temp & PORT_SUSPEND) != 0)
 			continue;
-dbg ("%s: resume port %d", hcd->bus_name, i);
+dbg ("%s: resume port %d", hcd->self.bus_name, i);
 		temp |= PORT_RESUME;
 		writel (temp, &ehci->regs->port_status [i]);
 		readl (&ehci->regs->command);	/* unblock posted writes */
@@ -472,7 +471,7 @@ static void ehci_irq (struct usb_hcd *hcd)
 
 	/* PCI errors [4.15.2.4] */
 	if (unlikely ((status & STS_FATAL) != 0)) {
-		err ("%s: fatal error, state %x", hcd->bus_name, hcd->state);
+		err ("%s: fatal error, state %x", hcd->self.bus_name, hcd->state);
 		ehci_reset (ehci);
 		// generic layer kills/unlinks all urbs
 		// then tasklet cleans up the rest
@@ -547,7 +546,7 @@ static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 	unsigned long		flags;
 
 	dbg ("%s urb_dequeue %p qh state %d",
-		hcd->bus_name, urb, qh->qh_state);
+		hcd->self.bus_name, urb, qh->qh_state);
 
 	switch (usb_pipetype (urb->pipe)) {
 	case PIPE_CONTROL:
@@ -608,7 +607,7 @@ static void ehci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 
 	/* ASSERT:  nobody can be submitting urbs for this any more */
 
-	dbg ("%s: free_config devnum %d", hcd->bus_name, udev->devnum);
+	dbg ("%s: free_config devnum %d", hcd->self.bus_name, udev->devnum);
 
 	spin_lock_irqsave (&ehci->lock, flags);
 	for (i = 0; i < 32; i++) {
@@ -645,7 +644,7 @@ static void ehci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 					spin_lock_irqsave (&ehci->lock, flags);
 				}
 			}
-			qh_unput (ehci, qh);
+			qh_put (ehci, qh);
 		}
 	}
 

drivers/usb/host/ehci-hub.c

@@ -41,14 +41,14 @@ static int check_reset_complete (
 	/* if reset finished and it's still not enabled -- handoff */
 	if (!(port_status & PORT_PE)) {
 		dbg ("%s port %d full speed, give to companion, 0x%x",
-			ehci->hcd.bus_name, index + 1, port_status);
+			ehci->hcd.self.bus_name, index + 1, port_status);
 
 		// what happens if HCS_N_CC(params) == 0 ?
 		port_status |= PORT_OWNER;
 		writel (port_status, &ehci->regs->port_status [index]);
 
 	} else
-		dbg ("%s port %d high speed", ehci->hcd.bus_name, index + 1);
+		dbg ("%s port %d high speed", ehci->hcd.self.bus_name, index + 1);
 
 	return port_status;
 }
@@ -306,11 +306,11 @@ static int ehci_hub_control (
 			if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
 					&& PORT_USB11 (temp)) {
 				dbg ("%s port %d low speed, give to companion",
-					hcd->bus_name, wIndex + 1);
+					hcd->self.bus_name, wIndex + 1);
 				temp |= PORT_OWNER;
 			} else {
 				vdbg ("%s port %d reset",
-					hcd->bus_name, wIndex + 1);
+					hcd->self.bus_name, wIndex + 1);
 				temp |= PORT_RESET;
 				temp &= ~PORT_PE;
 

drivers/usb/host/ehci-mem.c

@@ -98,16 +98,16 @@ static struct ehci_qh *ehci_qh_alloc (struct ehci_hcd *ehci, int flags)
 }
 
 /* to share a qh (cpu threads, or hc) */
-static inline struct ehci_qh *qh_put (/* ehci, */ struct ehci_qh *qh)
+static inline struct ehci_qh *qh_get (/* ehci, */ struct ehci_qh *qh)
 {
-	// dbg ("put %p (%d++)", qh, qh->refcount.counter);
+	// dbg ("get %p (%d++)", qh, qh->refcount.counter);
 	atomic_inc (&qh->refcount);
 	return qh;
 }
 
-static void qh_unput (struct ehci_hcd *ehci, struct ehci_qh *qh)
+static void qh_put (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
-	// dbg ("unput %p (--%d)", qh, qh->refcount.counter);
+	// dbg ("put %p (--%d)", qh, qh->refcount.counter);
 	if (!atomic_dec_and_test (&qh->refcount))
 		return;
 	/* clean qtds first, and know this is not linked */

drivers/usb/host/ehci-q.c

@@ -194,7 +194,7 @@ static void ehci_urb_done (
 			    ? PCI_DMA_FROMDEVICE
 			    : PCI_DMA_TODEVICE);
 	if (likely (urb->hcpriv != 0)) {
-		qh_unput (ehci, (struct ehci_qh *) urb->hcpriv);
+		qh_put (ehci, (struct ehci_qh *) urb->hcpriv);
 		urb->hcpriv = 0;
 	}
 
@@ -733,7 +733,7 @@ submit_async (
 		epnum |= 0x10;
 
 	vdbg ("%s: submit_async urb %p len %d ep %d-%s qtd %p [qh %p]",
-		ehci->hcd.bus_name, urb, urb->transfer_buffer_length,
+		ehci->hcd.self.bus_name, urb, urb->transfer_buffer_length,
 		epnum & 0x0f, (epnum & 0x10) ? "in" : "out",
 		qtd, dev ? dev->ep [epnum] : (void *)~0);
 
@@ -815,9 +815,9 @@ submit_async (
 	 * the HC and TT handle it when the TT has a buffer ready.
 	 */
 	if (likely (qh != 0)) {
-		urb->hcpriv = qh_put (qh);
+		urb->hcpriv = qh_get (qh);
 		if (likely (qh->qh_state == QH_STATE_IDLE))
-			qh_link_async (ehci, qh_put (qh));
+			qh_link_async (ehci, qh_get (qh));
 	}
 	spin_unlock_irqrestore (&ehci->lock, flags);
 	if (unlikely (!qh))
@@ -835,7 +835,7 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 
 	qh->qh_state = QH_STATE_IDLE;
 	qh->qh_next.qh = 0;
-	qh_unput (ehci, qh);			// refcount from reclaim 
+	qh_put (ehci, qh);			// refcount from reclaim 
 	ehci->reclaim = 0;
 	ehci->reclaim_ready = 0;
 
@@ -847,7 +847,7 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 			&& HCD_IS_RUNNING (ehci->hcd.state))
 		qh_link_async (ehci, qh);
 	else
-		qh_unput (ehci, qh);		// refcount from async list
+		qh_put (ehci, qh);		// refcount from async list
 }
 
 
@@ -872,7 +872,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 #endif
 
 	qh->qh_state = QH_STATE_UNLINK;
-	ehci->reclaim = qh = qh_put (qh);
+	ehci->reclaim = qh = qh_get (qh);
 
 	// dbg_qh ("start unlink", ehci, qh);
 
@@ -937,14 +937,14 @@ static void scan_async (struct ehci_hcd *ehci)
 			/* clean any finished work for this qh */
 			if (!list_empty (&qh->qtd_list)) {
 				// dbg_qh ("scan_async", ehci, qh);
-				qh = qh_put (qh);
+				qh = qh_get (qh);
 				spin_unlock_irqrestore (&ehci->lock, flags);
 
 				/* concurrent unlink could happen here */
 				qh_completions (ehci, &qh->qtd_list, 1);
 
 				spin_lock_irqsave (&ehci->lock, flags);
-				qh_unput (ehci, qh);
+				qh_put (ehci, qh);
 			}
 
 			/* unlink idle entries (reduces PCI usage) */

drivers/usb/host/ehci-sched.c

@@ -224,7 +224,7 @@ static void intr_deschedule (
 
 	do {
 		periodic_unlink (ehci, frame, qh);
-		qh_unput (ehci, qh);
+		qh_put (ehci, qh);
 		frame += period;
 	} while (frame < ehci->periodic_size);
 
@@ -345,7 +345,7 @@ static int intr_submit (
 		qh->hw_next = EHCI_LIST_END;
 		qh->usecs = usecs;
 
-		urb->hcpriv = qh_put (qh);
+		urb->hcpriv = qh_get (qh);
 		status = -ENOSPC;
 
 		/* pick a set of schedule slots, link the QH into them */
@@ -393,7 +393,7 @@ static int intr_submit (
 // AND handle it already being (implicitly) linked into this frame
 					BUG ();
 				} else {
-					ehci->pshadow [frame].qh = qh_put (qh);
+					ehci->pshadow [frame].qh = qh_get (qh);
 					ehci->periodic [frame] =
 						QH_NEXT (qh->qh_dma);
 				}
@@ -1113,8 +1113,8 @@ static void scan_periodic (struct ehci_hcd *ehci)
 				temp = q.qh->qh_next;
 				type = Q_NEXT_TYPE (q.qh->hw_next);
 				flags = intr_complete (ehci, frame,
-						qh_put (q.qh), flags);
-				qh_unput (ehci, q.qh);
+						qh_get (q.qh), flags);
+				qh_put (ehci, q.qh);
 				q = temp;
 				break;
 			case Q_TYPE_FSTN:

drivers/usb/host/ohci-dbg.c

@@ -89,7 +89,7 @@ void ohci_dump_periodic (struct ohci_hcd *ohci, char *label)
 			continue;
 		printed = 1;
 		printk (KERN_DEBUG "%s, ohci %s frame %2d:",
-				label, ohci->hcd.bus_name, i);
+				label, ohci->hcd.self.bus_name, i);
 		while (*ed_p != 0 && j--) {
 			struct ed *ed = dma_to_ed (ohci, le32_to_cpup(ed_p));
 			printk (" %p/%08x;", ed, ed->hwINFO);
@@ -99,7 +99,7 @@ void ohci_dump_periodic (struct ohci_hcd *ohci, char *label)
 	}
 	if (!printed)
 		printk (KERN_DEBUG "%s, ohci %s, empty periodic schedule\n",
-				label, ohci->hcd.bus_name);
+				label, ohci->hcd.self.bus_name);
 }
 #endif
 
@@ -229,7 +229,7 @@ static void ohci_dump_roothub (struct ohci_hcd *controller, int verbose)
 
 static void ohci_dump (struct ohci_hcd *controller, int verbose)
 {
-	dbg ("OHCI controller %s state", controller->hcd.bus_name);
+	dbg ("OHCI controller %s state", controller->hcd.self.bus_name);
 
 	// dumps some of the state we know about
 	ohci_dump_status (controller);

drivers/usb/host/ohci-hcd.c

@@ -379,7 +379,7 @@ static int hc_reset (struct ohci_hcd *ohci)
 	writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
 
 	dbg ("USB HC reset_hc %s: ctrl = 0x%x ;",
-		ohci->hcd.bus_name,
+		ohci->hcd.self.bus_name,
 		readl (&ohci->regs->control));
 
   	/* Reset USB (needed by some controllers) */
@@ -449,7 +449,7 @@ static int hc_start (struct ohci_hcd *ohci)
 	mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
  
 	/* connect the virtual root hub */
-	ohci->hcd.bus->root_hub = udev = usb_alloc_dev (NULL, ohci->hcd.bus);
+	ohci->hcd.self.root_hub = udev = usb_alloc_dev (NULL, &ohci->hcd.self);
 	ohci->hcd.state = USB_STATE_READY;
 	if (!udev) {
 	    ohci->disabled = 1;
@@ -491,7 +491,7 @@ static void ohci_irq (struct usb_hcd *hcd)
 
 	if (ints & OHCI_INTR_UE) {
 		ohci->disabled++;
-		err ("OHCI Unrecoverable Error, %s disabled", hcd->bus_name);
+		err ("OHCI Unrecoverable Error, %s disabled", hcd->self.bus_name);
 		// e.g. due to PCI Master/Target Abort
 
 #ifdef	DEBUG
@@ -530,7 +530,7 @@ static void ohci_stop (struct usb_hcd *hcd)
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
 
 	dbg ("%s: stop %s controller%s",
-		hcd->bus_name,
+		hcd->self.bus_name,
 		hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
 		ohci->disabled ? " (disabled)" : ""
 		);
@@ -571,7 +571,7 @@ ohci_start (struct usb_hcd *hcd)
 				&& hcd->pdev->device == 0x740c) {
 			ohci->flags = OHCI_QUIRK_AMD756;
 			info ("%s: AMD756 erratum 4 workaround",
-				hcd->bus_name);
+				hcd->self.bus_name);
 		}
 
 		/* Apple's OHCI driver has a lot of bizarre workarounds
@@ -581,7 +581,7 @@ ohci_start (struct usb_hcd *hcd)
 		else if (hcd->pdev->vendor == 0x1045
 				&& hcd->pdev->device == 0xc861) {
 			info ("%s: WARNING: OPTi workarounds unavailable",
-				hcd->bus_name);
+				hcd->self.bus_name);
 		}
 	}
 #else
@@ -601,7 +601,7 @@ ohci_start (struct usb_hcd *hcd)
 	}
 
 	if (hc_start (ohci) < 0) {
-		err ("can't start %s", ohci->hcd.bus_name);
+		err ("can't start %s", ohci->hcd.self.bus_name);
 		ohci_stop (hcd);
 		return -EBUSY;
 	}
@@ -623,13 +623,13 @@ static int ohci_suspend (struct usb_hcd *hcd, u32 state)
 	u16			cmd;
 
 	if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER) {
-		dbg ("can't suspend %s (state is %s)", hcd->bus_name,
+		dbg ("can't suspend %s (state is %s)", hcd->self.bus_name,
 			hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS));
 		return -EIO;
 	}
 
 	/* act as if usb suspend can always be used */
-	dbg ("%s: suspend to %d", hcd->bus_name, state);
+	dbg ("%s: suspend to %d", hcd->self.bus_name, state);
 	ohci->sleeping = 1;
 
 	/* First stop processing */
@@ -664,16 +664,16 @@ static int ohci_suspend (struct usb_hcd *hcd, u32 state)
 
 	switch (readl (&ohci->regs->control) & OHCI_CTRL_HCFS) {
 		case OHCI_USB_RESET:
-			dbg ("%s suspend->reset ?", hcd->bus_name);
+			dbg ("%s suspend->reset ?", hcd->self.bus_name);
 			break;
 		case OHCI_USB_RESUME:
-			dbg ("%s suspend->resume ?", hcd->bus_name);
+			dbg ("%s suspend->resume ?", hcd->self.bus_name);
 			break;
 		case OHCI_USB_OPER:
-			dbg ("%s suspend->operational ?", hcd->bus_name);
+			dbg ("%s suspend->operational ?", hcd->self.bus_name);
 			break;
 		case OHCI_USB_SUSPEND:
-			dbg ("%s suspended", hcd->bus_name);
+			dbg ("%s suspended", hcd->self.bus_name);
 			break;
 	}
 
@@ -711,8 +711,8 @@ static int hc_restart (struct ohci_hcd *ohci)
 
 	ohci->disabled = 1;
 	ohci->sleeping = 0;
-	if (ohci->hcd.bus->root_hub)
-		usb_disconnect (&ohci->hcd.bus->root_hub);
+	if (ohci->hcd.self.root_hub)
+		usb_disconnect (&ohci->hcd.self.root_hub);
 	
 	/* empty the interrupt branches */
 	for (i = 0; i < NUM_INTS; i++) ohci->ohci_int_load [i] = 0;
@@ -728,10 +728,10 @@ static int hc_restart (struct ohci_hcd *ohci)
 	ohci->ed_bulktail    = NULL;
 
 	if ((temp = hc_reset (ohci)) < 0 || (temp = hc_start (ohci)) < 0) {
-		err ("can't restart %s, %d", ohci->hcd.bus_name, temp);
+		err ("can't restart %s, %d", ohci->hcd.self.bus_name, temp);
 		return temp;
 	} else
-		dbg ("restart %s completed", ohci->hcd.bus_name);
+		dbg ("restart %s completed", ohci->hcd.self.bus_name);
 	return 0;
 }
 
@@ -767,13 +767,13 @@ static int ohci_resume (struct usb_hcd *hcd)
 	switch (temp) {
 
 	case OHCI_USB_RESET:	// lost power
-		info ("USB restart: %s", hcd->bus_name);
+		info ("USB restart: %s", hcd->self.bus_name);
 		retval = hc_restart (ohci);
 		break;
 
 	case OHCI_USB_SUSPEND:	// host wakeup
 	case OHCI_USB_RESUME:	// remote wakeup
-		info ("USB continue: %s from %s wakeup", hcd->bus_name,
+		info ("USB continue: %s from %s wakeup", hcd->self.bus_name,
 			 (temp == OHCI_USB_SUSPEND)
 				? "host" : "remote");
 		ohci->hc_control = OHCI_USB_RESUME;
@@ -786,7 +786,7 @@ static int ohci_resume (struct usb_hcd *hcd)
 		temp = readl (&ohci->regs->control);
 		temp = ohci->hc_control & OHCI_CTRL_HCFS;
 		if (temp != OHCI_USB_RESUME) {
-			err ("controller %s won't resume", hcd->bus_name);
+			err ("controller %s won't resume", hcd->self.bus_name);
 			ohci->disabled = 1;
 			retval = -EIO;
 			break;
@@ -836,7 +836,7 @@ dbg ("sleeping = %d, disabled = %d", ohci->sleeping, ohci->disabled);
 		break;
 
 	default:
-		warn ("odd PCI resume for %s", hcd->bus_name);
+		warn ("odd PCI resume for %s", hcd->self.bus_name);
 	}
 	return retval;
 }

drivers/usb/host/ohci-hub.c

@@ -41,7 +41,7 @@ static u32 roothub_portstatus (struct ohci_hcd *hc, int i)
 #define dbg_port(hc,label,num,value) \
 	dbg ("%s: %s roothub.portstatus [%d] " \
 		"= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", \
-		hc->hcd.bus_name, label, num, temp, \
+		hc->hcd.self.bus_name, label, num, temp, \
 		(temp & RH_PS_PRSC) ? " PRSC" : "", \
 		(temp & RH_PS_OCIC) ? " OCIC" : "", \
 		(temp & RH_PS_PSSC) ? " PSSC" : "", \
@@ -71,7 +71,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 
 	ports = roothub_a (ohci) & RH_A_NDP; 
 	if (ports > MAX_ROOT_PORTS) {
-		err ("%s: bogus NDP=%d", hcd->bus_name, ports);
+		err ("%s: bogus NDP=%d", hcd->self.bus_name, ports);
 		err ("rereads as NDP=%d",
 			readl (&ohci->regs->roothub.a) & RH_A_NDP);
 		/* retry later; "should not happen" */

drivers/usb/host/uhci.c

@@ -2799,6 +2799,7 @@ static int alloc_uhci(struct pci_dev *dev, unsigned int io_addr, unsigned int io
 
 	uhci->bus = bus;
 	bus->hcpriv = uhci;
+	bus->bus_name = dev->slot_name;
 
 	usb_register_bus(uhci->bus);
 

drivers/usb/host/usb-ohci.c

@@ -2400,6 +2400,7 @@ static ohci_t * __devinit hc_alloc_ohci (struct pci_dev *dev, void * mem_base)
 		return NULL;
 	}
 	ohci->bus->hcpriv = (void *) ohci;
+	ohci->bus->bus_name = dev->slot_name;
 
 	return ohci;
 } 

drivers/usb/host/usb-uhci.c

@@ -2977,6 +2977,7 @@ _static int __devinit alloc_uhci (struct pci_dev *dev, int irq, unsigned int io_
 
 	s->bus = bus;
 	bus->hcpriv = s;
+	bus->bus_name = dev->slot_name;
 
 	/* UHCI specs says devices must have 2 ports, but goes on to say */
 	/* they may have more but give no way to determine how many they */

drivers/usb/image/Config.help

-CONFIG_USB_DC2XX
-  Say Y here if you want to connect this type of still camera to your
-  computer's USB port.  See <file:Documentation/usb/dc2xx.txt> for
-  more information; some non-Kodak cameras may also work with this
-  driver, given application support (such as <http://www.gphoto.org/>).
-
-  This code is also available as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want).
-  The module will be called dc2xx.o. If you want to compile it as a
-  module, say M here and read <file:Documentation/modules.txt>.
-
 CONFIG_USB_MDC800
   Say Y here if you want to connect this type of still camera to
   your computer's USB port. This driver can be used with gphoto 0.4.3

drivers/usb/image/Config.in

@@ -2,7 +2,6 @@
 # USB Imageing devices configuration
 #
 comment 'USB Imaging devices'
-dep_tristate '  USB Kodak DC-2xx Camera support' CONFIG_USB_DC2XX $CONFIG_USB
 dep_tristate '  USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)' CONFIG_USB_MDC800 $CONFIG_USB $CONFIG_EXPERIMENTAL
 dep_tristate '  USB Scanner support' CONFIG_USB_SCANNER $CONFIG_USB
 dep_tristate '  Microtek X6USB scanner support' CONFIG_USB_MICROTEK $CONFIG_USB $CONFIG_SCSI
@@ -10,10 +9,10 @@ dep_tristate '  HP53xx USB scanner support (EXPERIMENTAL)' CONFIG_USB_HPUSBSCSI
 
 # Turn on CONFIG_USB_IMAGE if any of the drivers are compiled into the kernel to
 # make our Makefile logic a bit simpler
-if [ "$CONFIG_USB_DC2XX" = "y" -o "$CONFIG_USB_MDC800" = "y" ]; then
+if [ "$CONFIG_USB_MDC800" = "y" -o "$CONFIG_USB_SCANNER" = "y" ]; then
    define_bool CONFIG_USB_IMAGE y
 fi
-if [ "$CONFIG_USB_SCANNER" = "y" -o "$CONFIG_USB_MICROTEK" = "y" -o "$CONFIG_USB_HPUSBSCSI" = "y" ]; then
+if [ "$CONFIG_USB_MICROTEK" = "y" -o "$CONFIG_USB_HPUSBSCSI" = "y" ]; then
    define_bool CONFIG_USB_IMAGE y
 fi
    

drivers/usb/image/Makefile

@@ -4,7 +4,6 @@
 
 O_TARGET	:= usb-image.o
 
-obj-$(CONFIG_USB_DC2XX)		+= dc2xx.o
 obj-$(CONFIG_USB_MDC800)	+= mdc800.o
 obj-$(CONFIG_USB_HPUSBSCSI)	+= hpusbscsi.o
 obj-$(CONFIG_USB_MICROTEK)	+= microtek.o

drivers/usb/misc/tiglusb.c

@@ -33,7 +33,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "1.02"
+#define DRIVER_VERSION "1.03"
 #define DRIVER_AUTHOR  "Romain Lievin <roms@lpg.ticalc.org> & Julien Blache <jb@jblache.org>"
 #define DRIVER_DESC    "TI-GRAPH LINK USB (aka SilverLink) driver"
 #define DRIVER_LICENSE "GPL"
@@ -383,6 +383,7 @@ static void tiglusb_disconnect (struct usb_device *dev, void *drv_context)
 	wake_up (&s->wait);
 	if (s->state == _started)
 		sleep_on (&s->remove_ok);
+	down (&s->mutex);
 	s->dev = NULL;
 	s->opened = 0;
 
@@ -479,7 +480,7 @@ static void __exit tiglusb_cleanup (void)
 
 /* --------------------------------------------------------------------- */
 
-__setup ("tipar=", tiglusb_setup);
+__setup ("tiusb=", tiglusb_setup);
 module_init (tiglusb_init);
 module_exit (tiglusb_cleanup);
 

drivers/usb/net/Config.in

@@ -7,10 +7,10 @@ if [ "$CONFIG_NET" = "n" ]; then
 else
    dep_tristate '  USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)' CONFIG_USB_CATC $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
    dep_tristate '  USB CDC Ethernet support (EXPERIMENTAL)' CONFIG_USB_CDCETHER $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-   dep_tristate '  USB KLSI KL5USB101-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-   dep_tristate '  USB Pegasus/Pegasus-II based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+   dep_tristate '  USB KLSI KL5USB101-based ethernet device support' CONFIG_USB_KAWETH $CONFIG_USB $CONFIG_NET
+   dep_tristate '  USB Pegasus/Pegasus-II based ethernet device support' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET
    dep_tristate '  USB RTL8150 based ethernet device support (EXPERIMENTAL)' CONFIG_USB_RTL8150 $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
-   dep_tristate '  USB-to-USB Networking cable device support (EXPERIMENTAL)' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET $CONFIG_EXPERIMENTAL
+   dep_tristate '  USB-to-USB Networking cable device support' CONFIG_USB_USBNET $CONFIG_USB $CONFIG_NET
 fi
 
 # Turn on CONFIG_USB_NET if any of the drivers are compiled into the kernel to

drivers/usb/net/catc.c

@@ -278,7 +278,7 @@ static void catc_rx_done(struct urb *urb)
 			atomic_dec(&catc->recq_sz);
 			dbg("getting extra packet");
 			urb->dev = catc->usbdev;
-			if ((status = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
+			if ((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
 				dbg("submit(rx_urb) status %d", status);
 			}
 		} else {
@@ -329,7 +329,7 @@ static void catc_irq_done(struct urb *urb)
 				atomic_inc(&catc->recq_sz);
 		} else {
 			catc->rx_urb->dev = catc->usbdev;
-			if ((status = usb_submit_urb(catc->rx_urb, GFP_KERNEL)) < 0) {
+			if ((status = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) {
 				err("submit(rx_urb) status %d", status);
 			}
 		} 
@@ -351,7 +351,7 @@ static void catc_tx_run(struct catc *catc)
 	catc->tx_urb->transfer_buffer = catc->tx_buf[catc->tx_idx];
 	catc->tx_urb->dev = catc->usbdev;
 
-	if ((status = usb_submit_urb(catc->tx_urb, GFP_KERNEL)) < 0)
+	if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0)
 		err("submit(tx_urb), status %d", status);
 
 	catc->tx_idx = !catc->tx_idx;
@@ -655,7 +655,6 @@ static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
 {
         struct catc *catc = dev->priv;
         u32 cmd;
-	char tmp[40];
         
         if (get_user(cmd, (u32 *)useraddr))
                 return -EFAULT;
@@ -666,8 +665,7 @@ static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
                 struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
                 strncpy(info.driver, SHORT_DRIVER_DESC, ETHTOOL_BUSINFO_LEN);
                 strncpy(info.version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
-		sprintf(tmp, "usb%d:%d", catc->usbdev->bus->busnum, catc->usbdev->devnum);
-                strncpy(info.bus_info, tmp,ETHTOOL_BUSINFO_LEN);
+		usb_make_path (catc->usbdev, info.bus_info, sizeof info.bus_info);
                 if (copy_to_user(useraddr, &info, sizeof(info)))
                         return -EFAULT;
                 return 0;
@@ -909,9 +907,9 @@ static void *catc_probe(struct usb_device *usbdev, unsigned int ifnum, const str
 		f5u011_rxmode(catc, catc->rxmode);
 	}
 	dbg("Init done.");
-	printk(KERN_INFO "%s: %s USB Ethernet at usb%d:%d.%d, ",
+	printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s/%d, ",
 	       netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
-	       usbdev->bus->busnum, usbdev->devnum, ifnum);
+	       usbdev->bus->bus_name, usbdev->devpath, ifnum);
 	for (i = 0; i < 5; i++) printk("%2.2x:", netdev->dev_addr[i]);
 	printk("%2.2x.\n", netdev->dev_addr[i]);
 	return catc;

drivers/usb/net/pegasus.c

@@ -798,7 +798,6 @@ static int pegasus_ethtool_ioctl(struct net_device *net, void *uaddr)
 {
 	pegasus_t	*pegasus;
 	int		cmd;
-	char		tmp[128];
 
 	pegasus = net->priv;
 	if (get_user(cmd, (int *)uaddr))
@@ -808,9 +807,7 @@ static int pegasus_ethtool_ioctl(struct net_device *net, void *uaddr)
 		struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
 		strncpy(info.driver, DRIVER_DESC, ETHTOOL_BUSINFO_LEN);
 		strncpy(info.version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
-		sprintf(tmp, "usb%d:%d", pegasus->usb->bus->busnum,
-		        pegasus->usb->devnum);
-		strncpy(info.bus_info, tmp, ETHTOOL_BUSINFO_LEN);
+		usb_make_path (pegasus->usb, info.bus_info, sizeof info.bus_info);
 		if (copy_to_user(uaddr, &info, sizeof(info)))
 			return -EFAULT;
 		return 0;

drivers/usb/net/usbnet.c

@@ -538,25 +538,25 @@ static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
 
 		// allocate the skb for the individual packet
 		gl_skb = alloc_skb (size, GFP_ATOMIC);
-		if (gl_skb == 0)
-			return 0;
+		if (gl_skb) {
 
-		// copy the packet data to the new skb
-		memcpy (gl_skb->data, packet->packet_data, size);
+			// copy the packet data to the new skb
+			memcpy (gl_skb->data, packet->packet_data, size);
 
-		// set skb data size
-		gl_skb->len = size;
-		gl_skb->dev = &dev->net;
+			// set skb data size
+			gl_skb->len = size;
+			gl_skb->dev = &dev->net;
 
-		// determine the packet's protocol ID
-		gl_skb->protocol = eth_type_trans (gl_skb, &dev->net);
+			// determine the packet's protocol ID
+			gl_skb->protocol = eth_type_trans (gl_skb, &dev->net);
 
-		// update the status
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += size;
+			// update the status
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += size;
 
-		// notify os of the received packet
-		status = netif_rx (gl_skb);
+			// notify os of the received packet
+			status = netif_rx (gl_skb);
+		}
 
 		// advance to the next packet
 		packet = (struct gl_packet *)
@@ -834,10 +834,10 @@ static void nc_dump_registers (struct usbnet *dev)
 static inline void nc_dump_usbctl (struct usbnet *dev, u16 usbctl)
 {
 #ifdef DEBUG
-	devdbg (dev, "net1080 %03d/%03d usbctl 0x%x:%s%s%s%s%s;"
+	devdbg (dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
 			" this%s%s;"
 			" other%s%s; r/o 0x%x",
-		dev->udev->bus->busnum, dev->udev->devnum,
+		dev->udev->bus->bus_name, dev->udev->devpath,
 		usbctl,
 		(usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
 		(usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
@@ -879,10 +879,10 @@ static inline void nc_dump_usbctl (struct usbnet *dev, u16 usbctl)
 static inline void nc_dump_status (struct usbnet *dev, u16 status)
 {
 #ifdef DEBUG
-	devdbg (dev, "net1080 %03d/%03d status 0x%x:"
+	devdbg (dev, "net1080 %s-%s status 0x%x:"
 			" this (%c) PKT=%d%s%s%s;"
 			" other PKT=%d%s%s%s; unspec 0x%x",
-		dev->udev->bus->busnum, dev->udev->devnum,
+		dev->udev->bus->bus_name, dev->udev->devpath,
 		status,
 
 		// XXX the packet counts don't seem right
@@ -917,8 +917,8 @@ static inline void nc_dump_status (struct usbnet *dev, u16 status)
 static inline void nc_dump_ttl (struct usbnet *dev, u16 ttl)
 {
 #ifdef DEBUG
-	devdbg (dev, "net1080 %03d/%03d ttl 0x%x this = %d, other = %d",
-		dev->udev->bus->busnum, dev->udev->devnum,
+	devdbg (dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",
+		dev->udev->bus->bus_name, dev->udev->devpath,
 		ttl,
 
 		TTL_THIS (ttl),
@@ -941,7 +941,8 @@ static int net1080_reset (struct usbnet *dev)
 	// nc_dump_registers (dev);
 
 	if ((retval = nc_register_read (dev, REG_STATUS, vp)) < 0) {
-		dbg ("can't read dev %d status: %d", dev->udev->devnum, retval);
+		dbg ("can't read %s-%s status: %d",
+			dev->udev->bus->bus_name, dev->udev->devpath, retval);
 		goto done;
 	}
 	status = *vp;
@@ -1504,10 +1505,9 @@ static int usbnet_open (struct net_device *net)
 
 	// put into "known safe" state
 	if (info->reset && (retval = info->reset (dev)) < 0) {
-		devinfo (dev, "open reset fail (%d) usbnet bus%d%s, %s",
+		devinfo (dev, "open reset fail (%d) usbnet usb-%s-%s, %s",
 			retval,
-			// FIXME busnum is unstable
-			dev->udev->bus->busnum, dev->udev->devpath,
+			dev->udev->bus->bus_name, dev->udev->devpath,
 			info->description);
 		goto done;
 	}
@@ -1557,9 +1557,7 @@ static int usbnet_ethtool_ioctl (struct net_device *net, void *useraddr)
 		strncpy (info.version, DRIVER_VERSION, sizeof info.version);
 		strncpy (info.fw_version, dev->driver_info->description,
 			sizeof info.fw_version);
-		snprintf (info.bus_info, sizeof info.bus_info, "USB bus%d%s",
-			/* FIXME busnums are bogus/unstable IDs */
-			dev->udev->bus->busnum, dev->udev->devpath);
+		usb_make_path (dev->udev, info.bus_info, sizeof info.bus_info);
 		if (copy_to_user (useraddr, &info, sizeof (info)))
 			return -EFAULT;
 		return 0;
@@ -1847,9 +1845,8 @@ static void usbnet_disconnect (struct usb_device *udev, void *ptr)
 {
 	struct usbnet	*dev = (struct usbnet *) ptr;
 
-	devinfo (dev, "unregister usbnet bus%d%s, %s",
-		// FIXME busnum is unstable
-		udev->bus->busnum, udev->devpath,
+	devinfo (dev, "unregister usbnet usb-%s-%s, %s",
+		udev->bus->bus_name, udev->devpath,
 		dev->driver_info->description);
 	
 	unregister_netdev (&dev->net);
@@ -1938,9 +1935,8 @@ usbnet_probe (struct usb_device *udev, unsigned ifnum,
 	net->do_ioctl = usbnet_ioctl;
 
 	register_netdev (&dev->net);
-	devinfo (dev, "register usbnet bus%d%s, %s",
-		// FIXME busnum is unstable
-		udev->bus->busnum, udev->devpath,
+	devinfo (dev, "register usbnet usb-%s-%s, %s",
+		udev->bus->bus_name, udev->devpath,
 		dev->driver_info->description);
 
 	// ok, it's ready to go.

drivers/usb/serial/ftdi_sio.c

@@ -197,6 +197,7 @@ static struct usb_serial_device_type ftdi_sio_device = {
 };
 
 static struct usb_serial_device_type ftdi_8U232AM_device = {
+	owner:			THIS_MODULE,
 	name:			"FTDI 8U232AM",
 	id_table:		id_table_8U232AM,
 	num_interrupt_in:	0,

drivers/usb/serial/keyspan_pda.c

@@ -798,6 +798,7 @@ static void keyspan_pda_shutdown (struct usb_serial *serial)
 
 #ifdef KEYSPAN
 static struct usb_serial_device_type keyspan_pda_fake_device = {
+	owner:			THIS_MODULE,
 	name:			"Keyspan PDA - (prerenumeration)",
 	id_table:		id_table_fake,
 	num_interrupt_in:	NUM_DONT_CARE,
@@ -810,17 +811,19 @@ static struct usb_serial_device_type keyspan_pda_fake_device = {
 
 #ifdef XIRCOM
 static struct usb_serial_device_type xircom_pgs_fake_device = {
-        name:                   "Xircom / Entregra PGS - (prerenumeration)",
-        id_table:               id_table_fake_xircom,
-        num_interrupt_in:       NUM_DONT_CARE,
-        num_bulk_in:            NUM_DONT_CARE,
-        num_bulk_out:           NUM_DONT_CARE,
-        num_ports:              1,
-        startup:                keyspan_pda_fake_startup,
+	owner:			THIS_MODULE,
+	name:			"Xircom / Entregra PGS - (prerenumeration)",
+	id_table:		id_table_fake_xircom,
+	num_interrupt_in:	NUM_DONT_CARE,
+	num_bulk_in:		NUM_DONT_CARE,
+	num_bulk_out:		NUM_DONT_CARE,
+	num_ports:		1,
+	startup:		keyspan_pda_fake_startup,
 };
 #endif
 
 static struct usb_serial_device_type keyspan_pda_device = {
+	owner:			THIS_MODULE,
 	name:			"Keyspan PDA",
 	id_table:		id_table_std,
 	num_interrupt_in:	1,

drivers/usb/serial/usbserial.c

@@ -15,6 +15,10 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this driver
  *
+ * (04/10/2002) gkh
+ *	added serial_read_proc function which creates a
+ *	/proc/tty/driver/usb-serial file.
+ *
  * (03/27/2002) gkh
  *	Got USB serial console code working properly and merged into the main
  *	version of the tree.  Thanks to Randy Dunlap for the initial version
@@ -340,7 +344,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.4"
+#define DRIVER_VERSION "v1.5"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux-usb/"
 #define DRIVER_DESC "USB Serial Driver core"
 
@@ -844,6 +848,48 @@ static void serial_shutdown (struct usb_serial *serial)
 		generic_shutdown(serial);
 }
 
+static int serial_read_proc (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+	struct usb_serial *serial;
+	int length = 0;
+	int i;
+	off_t begin = 0;
+	char tmp[40];
+
+	dbg(__FUNCTION__);
+	length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION);
+	for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
+		serial = get_serial_by_minor(i);
+		if (serial == NULL)
+			continue;
+
+		length += sprintf (page+length, "%d:", i);
+		if (serial->type->owner)
+			length += sprintf (page+length, " module:%s", serial->type->owner->name);
+		length += sprintf (page+length, " name:\"%s\"", serial->type->name);
+		length += sprintf (page+length, " vendor:%04x product:%04x", serial->vendor, serial->product);
+		length += sprintf (page+length, " num_ports:%d", serial->num_ports);
+		length += sprintf (page+length, " port:%d", i - serial->minor + 1);
+
+		usb_make_path(serial->dev, tmp, sizeof(tmp));
+		length += sprintf (page+length, " path:%s", tmp);
+			
+		length += sprintf (page+length, "\n");
+		if ((length + begin) > (off + count))
+			goto done;
+		if ((length + begin) < off) {
+			begin += length;
+			length = 0;
+		}
+	}
+	*eof = 1;
+done:
+	if (off >= (length + begin))
+		return 0;
+	*start = page + (off-begin);
+	return ((count < begin+length-off) ? count : begin+length-off);
+}
+
 /*****************************************************************************
  * generic devices specific driver functions
  *****************************************************************************/
@@ -1491,6 +1537,7 @@ static struct tty_driver serial_tty_driver = {
 	unthrottle:		serial_unthrottle,
 	break_ctl:		serial_break,
 	chars_in_buffer:	serial_chars_in_buffer,
+	read_proc:		serial_read_proc,
 };
 
 

drivers/usb/storage/Makefile

@@ -10,16 +10,14 @@ EXTRA_CFLAGS	:= -I../../scsi/
 
 obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
 
-usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)			+= debug.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_HP8200e)			+= shuttle_usbat.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)			+= sddr09.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)			+= freecom.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SHUTTLE_SMARTMEDIA)	+= shuttle_sm.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SHUTTLE_COMPACTFLASH)	+= shuttle_cf.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM)			+= dpcm.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)			+= isd200.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)			+= datafab.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)			+= jumpshot.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)	+= debug.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_HP8200e)	+= shuttle_usbat.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)	+= sddr09.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)	+= freecom.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM)	+= dpcm.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)	+= isd200.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= datafab.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o $(usb-storage-obj-y)

include/linux/usb.h

@@ -890,7 +890,6 @@ extern int usb_string(struct usb_device *dev, int index,
 	char *buf, size_t size);
 extern int usb_set_configuration(struct usb_device *dev, int configuration);
 extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
-extern int usb_make_path(struct usb_device *dev, char *buf, size_t size);
 
 /*
  * timeouts, in seconds, used for sending/receiving control messages
@@ -917,6 +916,7 @@ struct usb_operations;
  */
 struct usb_bus {
 	int busnum;			/* Bus number (in order of reg) */
+	char *bus_name;			/* stable id (PCI slot_name etc) */
 
 #ifdef DEVNUM_ROUND_ROBIN
 	int devnum_next;                /* Next open device number in round-robin allocation */
@@ -1087,6 +1087,37 @@ const struct usb_device_id *usb_match_id(struct usb_device *dev,
 					 struct usb_interface *interface,
 					 const struct usb_device_id *id);
 
+/**
+ * usb_make_path - returns stable device path in the usb tree
+ * @dev: the device whose path is being constructed
+ * @buf: where to put the string
+ * @size: how big is "buf"?
+ *
+ * Returns length of the string (> 0) or negative if size was too small.
+ *
+ * This identifier is intended to be "stable", reflecting physical paths in
+ * hardware such as physical bus addresses for host controllers or ports on
+ * USB hubs.  That makes it stay the same until systems are physically
+ * reconfigured, by re-cabling a tree of USB devices or by moving USB host
+ * controllers.  Adding and removing devices, including virtual root hubs
+ * in host controller driver modules, does not change these path identifers;
+ * neither does rebooting or re-enumerating.  These are more useful identifiers
+ * than changeable ("unstable") ones like bus numbers or device addresses.
+ * 
+ * With a partial exception for devices connected to USB 2.0 root hubs, these
+ * identifiers are also predictable:  so long as the device tree isn't changed,
+ * plugging any USB device into a given hub port always gives it the same path.
+ * Because of the use of "companion" controllers, devices connected to ports on
+ * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
+ * high speed, and a different one if they are full or low speed.
+ */
+static inline int usb_make_path (struct usb_device *dev, char *buf, size_t size)
+{
+	int actual;
+	actual = snprintf (buf, size, "usb-%s-%s", dev->bus->bus_name, dev->devpath);
+	return (actual >= size) ? -1 : actual;
+}
+
 /* -------------------------------------------------------------------------- */
 
 /*