drm/i915: group sideband register accessors to a new file

Group both the HSW/LPT SBI interface and VLV IOSF sideband register
accessor functions into a new file. No functional changes.

v2: also move intel_sbi_{read,write} (Daniel)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/Makefile

@@ -36,6 +36,7 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o \
 	  intel_overlay.o \
 	  intel_sprite.o \
 	  intel_opregion.o \
+	  intel_sideband.o \
 	  dvo_ch7xxx.o \
 	  dvo_ch7017.o \
 	  dvo_ivch.o \

drivers/gpu/drm/i915/i915_drv.h

@@ -1929,9 +1929,17 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
 
 int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val);
 int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val);
+
+/* intel_sideband.c */
 int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val);
 int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val);
 int valleyview_nc_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val);
+u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg);
+void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, u32 val);
+u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
+		   enum intel_sbi_destination destination);
+void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
+		     enum intel_sbi_destination destination);
 
 int vlv_gpu_freq(int ddr_freq, int val);
 int vlv_freq_opcode(int ddr_freq, int val);

drivers/gpu/drm/i915/intel_display.c

@@ -381,43 +381,6 @@ static const intel_limit_t intel_limits_vlv_dp = {
 	.find_pll = intel_vlv_find_best_pll,
 };
 
-u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
-{
-	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
-
-	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
-		DRM_ERROR("DPIO idle wait timed out\n");
-		return 0;
-	}
-
-	I915_WRITE(DPIO_REG, reg);
-	I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
-		   DPIO_BYTE);
-	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
-		DRM_ERROR("DPIO read wait timed out\n");
-		return 0;
-	}
-
-	return I915_READ(DPIO_DATA);
-}
-
-void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, u32 val)
-{
-	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
-
-	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
-		DRM_ERROR("DPIO idle wait timed out\n");
-		return;
-	}
-
-	I915_WRITE(DPIO_DATA, val);
-	I915_WRITE(DPIO_REG, reg);
-	I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
-		   DPIO_BYTE);
-	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
-		DRM_ERROR("DPIO write wait timed out\n");
-}
-
 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
 						int refclk)
 {
@@ -1404,67 +1367,6 @@ static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 	POSTING_READ(reg);
 }
 
-/* SBI access */
-static void
-intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
-		enum intel_sbi_destination destination)
-{
-	u32 tmp;
-
-	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
-
-	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
-				100)) {
-		DRM_ERROR("timeout waiting for SBI to become ready\n");
-		return;
-	}
-
-	I915_WRITE(SBI_ADDR, (reg << 16));
-	I915_WRITE(SBI_DATA, value);
-
-	if (destination == SBI_ICLK)
-		tmp = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRWR;
-	else
-		tmp = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IOWR;
-	I915_WRITE(SBI_CTL_STAT, SBI_BUSY | tmp);
-
-	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
-				100)) {
-		DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
-		return;
-	}
-}
-
-static u32
-intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
-	       enum intel_sbi_destination destination)
-{
-	u32 value = 0;
-	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
-
-	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
-				100)) {
-		DRM_ERROR("timeout waiting for SBI to become ready\n");
-		return 0;
-	}
-
-	I915_WRITE(SBI_ADDR, (reg << 16));
-
-	if (destination == SBI_ICLK)
-		value = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRRD;
-	else
-		value = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IORD;
-	I915_WRITE(SBI_CTL_STAT, value | SBI_BUSY);
-
-	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
-				100)) {
-		DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
-		return 0;
-	}
-
-	return I915_READ(SBI_DATA);
-}
-
 void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
 {
 	u32 port_mask;

drivers/gpu/drm/i915/intel_drv.h

@@ -743,10 +743,6 @@ extern int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 extern int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
 				     struct drm_file *file_priv);
 
-extern u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg);
-extern void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
-			     u32 val);
-
 /* Power-related functions, located in intel_pm.c */
 extern void intel_init_pm(struct drm_device *dev);
 /* FBC */

drivers/gpu/drm/i915/intel_pm.c

@@ -4956,66 +4956,6 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val)
 	return 0;
 }
 
-static int vlv_punit_rw(struct drm_i915_private *dev_priv, u32 port, u8 opcode,
-			u8 addr, u32 *val)
-{
-	u32 cmd, devfn, be, bar;
-
-	bar = 0;
-	be = 0xf;
-	devfn = PCI_DEVFN(2, 0);
-
-	cmd = (devfn << IOSF_DEVFN_SHIFT) | (opcode << IOSF_OPCODE_SHIFT) |
-		(port << IOSF_PORT_SHIFT) | (be << IOSF_BYTE_ENABLES_SHIFT) |
-		(bar << IOSF_BAR_SHIFT);
-
-	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
-
-	if (I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) {
-		DRM_DEBUG_DRIVER("warning: pcode (%s) mailbox access failed\n",
-				 opcode == PUNIT_OPCODE_REG_READ ?
-				 "read" : "write");
-		return -EAGAIN;
-	}
-
-	I915_WRITE(VLV_IOSF_ADDR, addr);
-	if (opcode == PUNIT_OPCODE_REG_WRITE)
-		I915_WRITE(VLV_IOSF_DATA, *val);
-	I915_WRITE(VLV_IOSF_DOORBELL_REQ, cmd);
-
-	if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0,
-		     5)) {
-		DRM_ERROR("timeout waiting for pcode %s (%d) to finish\n",
-			  opcode == PUNIT_OPCODE_REG_READ ? "read" : "write",
-			  addr);
-		return -ETIMEDOUT;
-	}
-
-	if (opcode == PUNIT_OPCODE_REG_READ)
-		*val = I915_READ(VLV_IOSF_DATA);
-	I915_WRITE(VLV_IOSF_DATA, 0);
-
-	return 0;
-}
-
-int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
-{
-	return vlv_punit_rw(dev_priv, IOSF_PORT_PUNIT, PUNIT_OPCODE_REG_READ,
-			    addr, val);
-}
-
-int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val)
-{
-	return vlv_punit_rw(dev_priv, IOSF_PORT_PUNIT, PUNIT_OPCODE_REG_WRITE,
-			    addr, &val);
-}
-
-int valleyview_nc_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
-{
-	return vlv_punit_rw(dev_priv, IOSF_PORT_NC, PUNIT_OPCODE_REG_READ,
-			    addr, val);
-}
-
 int vlv_gpu_freq(int ddr_freq, int val)
 {
 	int mult, base;

drivers/gpu/drm/i915/intel_sideband.c

+/*
+ * Copyright © 2013 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "i915_drv.h"
+#include "intel_drv.h"
+
+/* IOSF sideband */
+static int vlv_punit_rw(struct drm_i915_private *dev_priv, u32 port, u8 opcode,
+			u8 addr, u32 *val)
+{
+	u32 cmd, devfn, be, bar;
+
+	bar = 0;
+	be = 0xf;
+	devfn = PCI_DEVFN(2, 0);
+
+	cmd = (devfn << IOSF_DEVFN_SHIFT) | (opcode << IOSF_OPCODE_SHIFT) |
+		(port << IOSF_PORT_SHIFT) | (be << IOSF_BYTE_ENABLES_SHIFT) |
+		(bar << IOSF_BAR_SHIFT);
+
+	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+	if (I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) {
+		DRM_DEBUG_DRIVER("warning: pcode (%s) mailbox access failed\n",
+				 opcode == PUNIT_OPCODE_REG_READ ?
+				 "read" : "write");
+		return -EAGAIN;
+	}
+
+	I915_WRITE(VLV_IOSF_ADDR, addr);
+	if (opcode == PUNIT_OPCODE_REG_WRITE)
+		I915_WRITE(VLV_IOSF_DATA, *val);
+	I915_WRITE(VLV_IOSF_DOORBELL_REQ, cmd);
+
+	if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0,
+		     5)) {
+		DRM_ERROR("timeout waiting for pcode %s (%d) to finish\n",
+			  opcode == PUNIT_OPCODE_REG_READ ? "read" : "write",
+			  addr);
+		return -ETIMEDOUT;
+	}
+
+	if (opcode == PUNIT_OPCODE_REG_READ)
+		*val = I915_READ(VLV_IOSF_DATA);
+	I915_WRITE(VLV_IOSF_DATA, 0);
+
+	return 0;
+}
+
+int valleyview_punit_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
+{
+	return vlv_punit_rw(dev_priv, IOSF_PORT_PUNIT, PUNIT_OPCODE_REG_READ,
+			    addr, val);
+}
+
+int valleyview_punit_write(struct drm_i915_private *dev_priv, u8 addr, u32 val)
+{
+	return vlv_punit_rw(dev_priv, IOSF_PORT_PUNIT, PUNIT_OPCODE_REG_WRITE,
+			    addr, &val);
+}
+
+int valleyview_nc_read(struct drm_i915_private *dev_priv, u8 addr, u32 *val)
+{
+	return vlv_punit_rw(dev_priv, IOSF_PORT_NC, PUNIT_OPCODE_REG_READ,
+			    addr, val);
+}
+
+u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
+{
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+		DRM_ERROR("DPIO idle wait timed out\n");
+		return 0;
+	}
+
+	I915_WRITE(DPIO_REG, reg);
+	I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
+		   DPIO_BYTE);
+	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+		DRM_ERROR("DPIO read wait timed out\n");
+		return 0;
+	}
+
+	return I915_READ(DPIO_DATA);
+}
+
+void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, u32 val)
+{
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
+		DRM_ERROR("DPIO idle wait timed out\n");
+		return;
+	}
+
+	I915_WRITE(DPIO_DATA, val);
+	I915_WRITE(DPIO_REG, reg);
+	I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
+		   DPIO_BYTE);
+	if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
+		DRM_ERROR("DPIO write wait timed out\n");
+}
+
+/* SBI access */
+u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
+		   enum intel_sbi_destination destination)
+{
+	u32 value = 0;
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
+				100)) {
+		DRM_ERROR("timeout waiting for SBI to become ready\n");
+		return 0;
+	}
+
+	I915_WRITE(SBI_ADDR, (reg << 16));
+
+	if (destination == SBI_ICLK)
+		value = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRRD;
+	else
+		value = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IORD;
+	I915_WRITE(SBI_CTL_STAT, value | SBI_BUSY);
+
+	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
+				100)) {
+		DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
+		return 0;
+	}
+
+	return I915_READ(SBI_DATA);
+}
+
+void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
+		     enum intel_sbi_destination destination)
+{
+	u32 tmp;
+
+	WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+	if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
+				100)) {
+		DRM_ERROR("timeout waiting for SBI to become ready\n");
+		return;
+	}
+
+	I915_WRITE(SBI_ADDR, (reg << 16));
+	I915_WRITE(SBI_DATA, value);
+
+	if (destination == SBI_ICLK)
+		tmp = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRWR;
+	else
+		tmp = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IOWR;
+	I915_WRITE(SBI_CTL_STAT, SBI_BUSY | tmp);
+
+	if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0,
+				100)) {
+		DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
+		return;
+	}
+}