Commit 59e6b434 authored by David S. Miller's avatar David S. Miller

[TG3]: Refine DMA boundary setting.

Extract DMA boundary bit selection into a seperate
function, tg3_calc_dma_bndry().  Call this from
tg3_test_dma().

Make DMA test more reliable by using no DMA boundry
setting during the test.  If the test passes, then
use the setting we selected before the test.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
parent 15f9850d
......@@ -8775,6 +8775,146 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
return 0;
}
#define BOUNDARY_SINGLE_CACHELINE 1
#define BOUNDARY_MULTI_CACHELINE 2
static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
{
int cacheline_size;
u8 byte;
int goal;
pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte);
if (byte == 0)
cacheline_size = 1024;
else
cacheline_size = (int) byte * 4;
/* On 5703 and later chips, the boundary bits have no
* effect.
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
goto out;
#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC)
goal = BOUNDARY_MULTI_CACHELINE;
#else
#if defined(CONFIG_SPARC64) || defined(CONFIG_ALPHA)
goal = BOUNDARY_SINGLE_CACHELINE;
#else
goal = 0;
#endif
#endif
if (!goal)
goto out;
/* PCI controllers on most RISC systems tend to disconnect
* when a device tries to burst across a cache-line boundary.
* Therefore, letting tg3 do so just wastes PCI bandwidth.
*
* Unfortunately, for PCI-E there are only limited
* write-side controls for this, and thus for reads
* we will still get the disconnects. We'll also waste
* these PCI cycles for both read and write for chips
* other than 5700 and 5701 which do not implement the
* boundary bits.
*/
if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
switch (cacheline_size) {
case 16:
case 32:
case 64:
case 128:
if (goal == BOUNDARY_SINGLE_CACHELINE) {
val |= (DMA_RWCTRL_READ_BNDRY_128_PCIX |
DMA_RWCTRL_WRITE_BNDRY_128_PCIX);
} else {
val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX |
DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
}
break;
case 256:
val |= (DMA_RWCTRL_READ_BNDRY_256_PCIX |
DMA_RWCTRL_WRITE_BNDRY_256_PCIX);
break;
default:
val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX |
DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
break;
};
} else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
switch (cacheline_size) {
case 16:
case 32:
case 64:
if (goal == BOUNDARY_SINGLE_CACHELINE) {
val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE;
val |= DMA_RWCTRL_WRITE_BNDRY_64_PCIE;
break;
}
/* fallthrough */
case 128:
default:
val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE;
val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE;
break;
};
} else {
switch (cacheline_size) {
case 16:
if (goal == BOUNDARY_SINGLE_CACHELINE) {
val |= (DMA_RWCTRL_READ_BNDRY_16 |
DMA_RWCTRL_WRITE_BNDRY_16);
break;
}
/* fallthrough */
case 32:
if (goal == BOUNDARY_SINGLE_CACHELINE) {
val |= (DMA_RWCTRL_READ_BNDRY_32 |
DMA_RWCTRL_WRITE_BNDRY_32);
break;
}
/* fallthrough */
case 64:
if (goal == BOUNDARY_SINGLE_CACHELINE) {
val |= (DMA_RWCTRL_READ_BNDRY_64 |
DMA_RWCTRL_WRITE_BNDRY_64);
break;
}
/* fallthrough */
case 128:
if (goal == BOUNDARY_SINGLE_CACHELINE) {
val |= (DMA_RWCTRL_READ_BNDRY_128 |
DMA_RWCTRL_WRITE_BNDRY_128);
break;
}
/* fallthrough */
case 256:
val |= (DMA_RWCTRL_READ_BNDRY_256 |
DMA_RWCTRL_WRITE_BNDRY_256);
break;
case 512:
val |= (DMA_RWCTRL_READ_BNDRY_512 |
DMA_RWCTRL_WRITE_BNDRY_512);
break;
case 1024:
default:
val |= (DMA_RWCTRL_READ_BNDRY_1024 |
DMA_RWCTRL_WRITE_BNDRY_1024);
break;
};
}
out:
return val;
}
static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dma, int size, int to_device)
{
struct tg3_internal_buffer_desc test_desc;
......@@ -8861,7 +9001,7 @@ static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dm
static int __devinit tg3_test_dma(struct tg3 *tp)
{
dma_addr_t buf_dma;
u32 *buf;
u32 *buf, saved_dma_rwctrl;
int ret;
buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma);
......@@ -8873,46 +9013,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
tp->dma_rwctrl = ((0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT));
#ifndef CONFIG_X86
{
u8 byte;
int cacheline_size;
pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte);
if (byte == 0)
cacheline_size = 1024;
else
cacheline_size = (int) byte * 4;
switch (cacheline_size) {
case 16:
case 32:
case 64:
case 128:
if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
tp->dma_rwctrl |=
DMA_RWCTRL_WRITE_BNDRY_384_PCIX;
break;
} else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
tp->dma_rwctrl &=
~(DMA_RWCTRL_PCI_WRITE_CMD);
tp->dma_rwctrl |=
DMA_RWCTRL_WRITE_BNDRY_128_PCIE;
break;
}
/* fallthrough */
case 256:
if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
tp->dma_rwctrl |=
DMA_RWCTRL_WRITE_BNDRY_256;
else if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
tp->dma_rwctrl |=
DMA_RWCTRL_WRITE_BNDRY_256_PCIX;
};
}
#endif
tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl);
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
/* DMA read watermark not used on PCIE */
......@@ -8931,7 +9032,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
if (ccval == 0x6 || ccval == 0x7)
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
/* Set bit 23 to renable PCIX hw bug fix */
/* Set bit 23 to enable PCIX hw bug fix */
tp->dma_rwctrl |= 0x009f0000;
} else {
tp->dma_rwctrl |= 0x001b000f;
......@@ -8972,6 +9073,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
goto out;
/* It is best to perform DMA test with maximum write burst size
* to expose the 5700/5701 write DMA bug.
*/
saved_dma_rwctrl = tp->dma_rwctrl;
tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
while (1) {
u32 *p = buf, i;
......@@ -9010,8 +9118,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
if (p[i] == i)
continue;
if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) ==
DMA_RWCTRL_WRITE_BNDRY_DISAB) {
if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
DMA_RWCTRL_WRITE_BNDRY_16) {
tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16;
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
break;
......@@ -9028,6 +9137,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
break;
}
}
if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
DMA_RWCTRL_WRITE_BNDRY_16) {
/* DMA test passed without adjusting DMA boundary,
* just restore the calculated DMA boundary
*/
tp->dma_rwctrl = saved_dma_rwctrl;
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
}
out:
pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma);
......@@ -9429,6 +9546,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
(tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
dev->name, tp->dma_rwctrl);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment