Commit 5a18bb14 authored by Kurt Kanzenbach's avatar Kurt Kanzenbach Committed by David S. Miller

dt-bindings: net: dsa: Let dsa.txt refer to dsa.yaml

The DSA bindings have been converted to YAML. Therefore, the old text style
documentation should refer to that one.

The text file can be removed completely once all the existing DSA switch
bindings have been converted as well.
Signed-off-by: Kurt Kanzenbach's avatarKurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent bce58590
Distributed Switch Architecture Device Tree Bindings
----------------------------------------------------
Switches are true Linux devices and can be probed by any means. Once
probed, they register to the DSA framework, passing a node
pointer. This node is expected to fulfil the following binding, and
may contain additional properties as required by the device it is
embedded within.
Required properties:
- ports : A container for child nodes representing switch ports.
Optional properties:
- dsa,member : A two element list indicates which DSA cluster, and position
within the cluster a switch takes. <0 0> is cluster 0,
switch 0. <0 1> is cluster 0, switch 1. <1 0> is cluster 1,
switch 0. A switch not part of any cluster (single device
hanging off a CPU port) must not specify this property
The ports container has the following properties
Required properties:
- #address-cells : Must be 1
- #size-cells : Must be 0
Each port children node must have the following mandatory properties:
- reg : Describes the port address in the switch
An uplink/downlink port between switches in the cluster has the following
mandatory property:
- link : Should be a list of phandles to other switch's DSA
port. This port is used as the outgoing port
towards the phandle ports. The full routing
information must be given, not just the one hop
routes to neighbouring switches.
A CPU port has the following mandatory property:
- ethernet : Should be a phandle to a valid Ethernet device node.
This host device is what the switch port is
connected to.
A user port has the following optional property:
- label : Describes the label associated with this port, which
will become the netdev name.
Port child nodes may also contain the following optional standardised
properties, described in binding documents:
- phy-handle : Phandle to a PHY on an MDIO bus. See
Documentation/devicetree/bindings/net/ethernet.txt
for details.
- phy-mode : See
Documentation/devicetree/bindings/net/ethernet.txt
for details.
- fixed-link : Fixed-link subnode describing a link to a non-MDIO
managed entity. See
Documentation/devicetree/bindings/net/fixed-link.txt
for details.
The MAC address will be determined using the optional properties
defined in ethernet.txt.
Example
The following example shows three switches on three MDIO busses,
linked into one DSA cluster.
&mdio1 {
#address-cells = <1>;
#size-cells = <0>;
switch0: switch0@0 {
compatible = "marvell,mv88e6085";
reg = <0>;
dsa,member = <0 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan0";
};
port@1 {
reg = <1>;
label = "lan1";
local-mac-address = [00 00 00 00 00 00];
};
port@2 {
reg = <2>;
label = "lan2";
};
switch0port5: port@5 {
reg = <5>;
phy-mode = "rgmii-txid";
link = <&switch1port6
&switch2port9>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@6 {
reg = <6>;
ethernet = <&fec1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
};
};
};
&mdio2 {
#address-cells = <1>;
#size-cells = <0>;
switch1: switch1@0 {
compatible = "marvell,mv88e6085";
reg = <0>;
dsa,member = <0 1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan3";
phy-handle = <&switch1phy0>;
};
port@1 {
reg = <1>;
label = "lan4";
phy-handle = <&switch1phy1>;
};
port@2 {
reg = <2>;
label = "lan5";
phy-handle = <&switch1phy2>;
};
switch1port5: port@5 {
reg = <5>;
link = <&switch2port9>;
phy-mode = "rgmii-txid";
fixed-link {
speed = <1000>;
full-duplex;
};
};
switch1port6: port@6 {
reg = <6>;
phy-mode = "rgmii-txid";
link = <&switch0port5>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
switch1phy0: switch1phy0@0 {
reg = <0>;
};
switch1phy1: switch1phy0@1 {
reg = <1>;
};
switch1phy2: switch1phy0@2 {
reg = <2>;
};
};
};
};
&mdio4 {
#address-cells = <1>;
#size-cells = <0>;
switch2: switch2@0 {
compatible = "marvell,mv88e6085";
reg = <0>;
dsa,member = <0 2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan6";
};
port@1 {
reg = <1>;
label = "lan7";
};
port@2 {
reg = <2>;
label = "lan8";
};
port@3 {
reg = <3>;
label = "optical3";
fixed-link {
speed = <1000>;
full-duplex;
link-gpios = <&gpio6 2
GPIO_ACTIVE_HIGH>;
};
};
port@4 {
reg = <4>;
label = "optical4";
fixed-link {
speed = <1000>;
full-duplex;
link-gpios = <&gpio6 3
GPIO_ACTIVE_HIGH>;
};
};
switch2port9: port@9 {
reg = <9>;
phy-mode = "rgmii-txid";
link = <&switch1port5
&switch0port5>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment