[PATCH] USB ipaq driver update

The ActiveSync USB "protocol" seems to be the same for all WinCE
devices seen so far. So it seems reasonable to pre-emptively support
all devices which work with ActiveSync.

Documentation/usb/usb-serial.txt

@@ -91,27 +91,27 @@ HandSpring Visor, Palm USB, and Cli
   Kroah-Hartman at greg@kroah.com
 
 
-Compaq iPAQ, HP Jornada and Casio EM500 driver
+PocketPC PDA Driver
 
-  This driver can be used to connect to Compaq iPAQ, HP Jornada and Casio EM500
-  PDAs running Windows CE 3.0 or PocketPC 2002 using a USB cable/cradle.
-  It's very likely that every device supported by ActiveSync USB works with this
-  driver. The driver supports the Compaq iPAQ, Jornada 548/568 and the Casio
-  EM500 out of the box. For others, please use module parameters to specify
-  the product and vendor id. e.g. modprobe ipaq vendor=0x3f0 product=0x1125
+  This driver can be used to connect to Compaq iPAQ, HP Jornada, Casio EM500
+  and other PDAs running Windows CE 3.0 or PocketPC 2002 using a USB
+  cable/cradle.
+  Most devices supported by ActiveSync are supported out of the box.
+  For others, please use module parameters to specify the product and vendor
+  id. e.g. modprobe ipaq vendor=0x3f0 product=0x1125
 
   The driver presents a serial interface (usually on /dev/ttyUSB0) over
-  which one may run ppp and establish a TCP/IP link to the iPAQ. Once this
+  which one may run ppp and establish a TCP/IP link to the PDA. Once this
   is done, you can transfer files, backup, download email etc. The most
-  significant advantage of using USB is speed - you can get 73 to 113
-  kbytes/sec for download/upload to the iPAQ.
+  significant advantage of using USB is speed - I can get 73 to 113
+  kbytes/sec for download/upload to my iPAQ.
 
   This driver is only one of a set of components required to utilize
   the USB connection. Please visit http://synce.sourceforge.net which
   contains the necessary packages and a simple step-by-step howto.
 
   Once connected, you can use Win CE programs like ftpView, Pocket Outlook
-  from the iPAQ and xcerdisp, synce utilities from the Linux side.
+  from the PDA and xcerdisp, synce utilities from the Linux side.
 
   To use Pocket IE, follow the instructions given at
   http://www.tekguru.co.uk/EM500/usbtonet.htm to achieve the same thing
@@ -126,8 +126,18 @@ Compaq iPAQ, HP Jornada and Casio EM500 driver
 
   If it doesn't work for some reason, load both the usbserial and ipaq module
   with the module parameter "debug" set to 1 and examine the system log.
-  You can also try soft-resetting your iPAQ before attempting a connection.
-
+  You can also try soft-resetting your PDA before attempting a connection.
+
+  Other functionality may be possible depending on your PDA. According to
+  Wes Cilldhaire <billybobjoehenrybob@hotmail.com>, with the Toshiba E570,
+  ...if you boot into the bootloader (hold down the power when hitting the
+  reset button, continuing to hold onto the power until the bootloader screen
+  is displayed), then put it in the cradle with the ipaq driver loaded, open
+  a terminal on /dev/ttyUSB0, it gives you a "USB Reflash" terminal, which can
+  be used to flash the ROM, as well as the microP code..  so much for needing
+  Toshiba's $350 serial cable for flashing!! :D
+  NOTE: This has NOT been tested. Use at your own risk.
+ 
   For any questions or problems with the driver, please contact Ganesh
   Varadarajan <ganesh@veritas.com>
 

drivers/usb/serial/Kconfig

@@ -150,11 +150,11 @@ config USB_SERIAL_VISOR
 	  module, say M here and read <file:Documentation/modules.txt>.
 
 config USB_SERIAL_IPAQ
-	tristate "USB Compaq iPAQ / HP Jornada / Casio EM500 Driver"
+	tristate "USB PocketPC PDA Driver"
 	depends on USB_SERIAL
 	help
 	  Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
-	  548/568 or Casio EM500 running Windows CE 3.0 or PocketPC 2002
+	  or any other PDA running Windows CE 3.0 or PocketPC 2002
 	  using a USB cradle/cable. For information on using the driver,
 	  read <file:Documentation/usb/usb-serial.txt>.
 

drivers/usb/serial/ipaq.c

@@ -9,6 +9,10 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
+ * (12/12/2002) ganesh
+ * 	Added support for practically all devices supported by ActiveSync
+ * 	on Windows. Thanks to Wes Cilldhaire <billybobjoehenrybob@hotmail.com>.
+ *
  * (26/11/2002) ganesh
  * 	Added insmod options to specify product and vendor id.
  * 	Use modprobe ipaq vendor=0xfoo product=0xbar
@@ -68,9 +72,9 @@
  * Version Information
  */
 
-#define DRIVER_VERSION "v0.4"
+#define DRIVER_VERSION "v0.5"
 #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
-#define DRIVER_DESC "USB Compaq iPAQ, HP Jornada, Casio EM500 driver"
+#define DRIVER_DESC "USB PocketPC PDA driver"
 
 static int	product, vendor;
 
@@ -94,10 +98,36 @@ static void ipaq_destroy_lists(struct usb_serial_port *port);
 static struct usb_device_id ipaq_id_table [] = {
 	/* The first entry is a placeholder for the insmod-specified device */
 	{ USB_DEVICE(COMPAQ_VENDOR_ID, COMPAQ_IPAQ_ID) },
+	{ USB_DEVICE(ASKEY_VENDOR_ID, ASKEY_PRODUCT_ID) },
+	{ USB_DEVICE(BCOM_VENDOR_ID, BCOM_0065_ID) },
+	{ USB_DEVICE(BCOM_VENDOR_ID, BCOM_0066_ID) },
+	{ USB_DEVICE(BCOM_VENDOR_ID, BCOM_0067_ID) },
+	{ USB_DEVICE(CASIO_VENDOR_ID, CASIO_2001_ID) },
+	{ USB_DEVICE(CASIO_VENDOR_ID, CASIO_EM500_ID) },
 	{ USB_DEVICE(COMPAQ_VENDOR_ID, COMPAQ_IPAQ_ID) },
+	{ USB_DEVICE(COMPAQ_VENDOR_ID, COMPAQ_0032_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_JORNADA_548_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_JORNADA_568_ID) },
-	{ USB_DEVICE(CASIO_VENDOR_ID, CASIO_EM500_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_2016_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_2116_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_2216_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_3016_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_3116_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_3216_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_4016_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_4116_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_4216_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_5016_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_5116_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_5216_ID) },
+	{ USB_DEVICE(LINKUP_VENDOR_ID, LINKUP_PRODUCT_ID) },
+	{ USB_DEVICE(MICROSOFT_VENDOR_ID, MICROSOFT_00CE_ID) },
+	{ USB_DEVICE(PORTATEC_VENDOR_ID, PORTATEC_PRODUCT_ID) },
+	{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_WIRELESS_ID) },
+	{ USB_DEVICE(SOCKET_VENDOR_ID, SOCKET_PRODUCT_ID) },
+	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_ID) },
+	{ USB_DEVICE(HTC_VENDOR_ID, HTC_PRODUCT_ID) },
+	{ USB_DEVICE(NEC_VENDOR_ID, NEC_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -114,7 +144,7 @@ static struct usb_driver ipaq_driver = {
 /* All of the device info needed for the Compaq iPAQ */
 struct usb_serial_device_type ipaq_device = {
 	.owner =		THIS_MODULE,
-	.name =			"Compaq iPAQ",
+	.name =			"PocketPC PDA",
 	.id_table =		ipaq_id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		1,

drivers/usb/serial/ipaq.h

@@ -9,22 +9,66 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * 
  */
 
 #ifndef __LINUX_USB_SERIAL_IPAQ_H
 #define __LINUX_USB_SERIAL_IPAQ_H
 
+#define ASKEY_VENDOR_ID		0x1690
+#define ASKEY_PRODUCT_ID	0x0601
+
+#define BCOM_VENDOR_ID		0x0960
+#define BCOM_0065_ID		0x0065
+#define BCOM_0066_ID		0x0066
+#define BCOM_0067_ID		0x0067
+
+#define CASIO_VENDOR_ID		0x07cf
+#define CASIO_2001_ID		0x2001
+#define CASIO_EM500_ID		0x2002
 
 #define COMPAQ_VENDOR_ID	0x049f
 #define COMPAQ_IPAQ_ID		0x0003
+#define COMPAQ_0032_ID		0x0032
 
 #define HP_VENDOR_ID		0x03f0
 #define HP_JORNADA_548_ID	0x1016
 #define HP_JORNADA_568_ID	0x1116
+#define HP_2016_ID		0x2016
+#define HP_2116_ID		0x2116
+#define HP_2216_ID		0x2216
+#define HP_3016_ID		0x3016
+#define HP_3116_ID		0x3116
+#define HP_3216_ID		0x3216
+#define HP_4016_ID		0x4016
+#define HP_4116_ID		0x4116
+#define HP_4216_ID		0x4216
+#define HP_5016_ID		0x5016
+#define HP_5116_ID		0x5116
+#define HP_5216_ID		0x5216
 
-#define CASIO_VENDOR_ID		0x07cf
-#define CASIO_EM500_ID		0x2002
+#define LINKUP_VENDOR_ID	0x094b
+#define LINKUP_PRODUCT_ID	0x0001
+
+#define MICROSOFT_VENDOR_ID	0x045e
+#define MICROSOFT_00CE_ID	0x00ce
+
+#define PORTATEC_VENDOR_ID	0x0961
+#define PORTATEC_PRODUCT_ID	0x0010
+
+#define SAGEM_VENDOR_ID		0x5e04
+#define SAGEM_WIRELESS_ID	0xce00
+
+#define SOCKET_VENDOR_ID	0x0104
+#define SOCKET_PRODUCT_ID	0x00be
+
+#define TOSHIBA_VENDOR_ID	0x0930
+#define TOSHIBA_PRODUCT_ID	0x0700
+
+#define HTC_VENDOR_ID		0x0bb4
+#define HTC_PRODUCT_ID		0x00ce
+
+#define NEC_VENDOR_ID		0x0409
+#define NEC_PRODUCT_ID		0x00d5
 
 /*
  * Since we can't queue our bulk write urbs (don't know why - it just
@@ -41,8 +85,7 @@
  *
  * The value of PACKET_SIZE was empirically determined by
  * checking the maximum write sizes sent down by the ppp ldisc.
- * URBDATA_QUEUE_MAX is set to 64K, which is the maximum TCP window size
- * supported by the iPAQ.
+ * URBDATA_QUEUE_MAX is set to 64K, which is the maximum TCP window size.
  */
 
 struct ipaq_packet {