Merge tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB changes for v4.21

So it looks like folks are interested in dwc3 again. Almost 64% of the
changes are in dwc3 this time around with some other bits in gadget
functions and dwc2.

There are two important parts here: a. removal of the waitqueue from
dwc3's dequeue implementation, which will guarantee that gadget
functions can dequeue from any context and; b. better method for
starting isochronous transfers to avoid, as much as possible, missed
isoc frames.

Apart from these, we have the usual set of non-critical fixes and new
features all over the place.

* tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (56 commits)
  usb: dwc2: Fix disable all EP's on disconnect
  usb: dwc3: gadget: Disable CSP for stream OUT ep
  usb: dwc2: disable power_down on Amlogic devices
  Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
  USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE
  usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
  usb: dwc3: trace: add missing break statement to make compiler happy
  usb: dwc3: gadget: Report isoc transfer frame number
  usb: gadget: Introduce frame_number to usb_request
  usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro
  usb: renesas_usbhs: Remove dummy runtime PM callbacks
  usb: dwc2: host: use hrtimer for NAK retries
  usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
  usb: mtu3: enable SETUPENDISR interrupt
  usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
  usb: mtu3: enable hardware remote wakeup from L1 automatically
  usb: mtu3: remove QMU checksum
  usb/mtu3: power down device ip at setup
  usb: dwc2: Disable power down feature on Samsung SoCs
  usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
  ...

Documentation/devicetree/bindings/usb/dwc3.txt

@@ -37,7 +37,11 @@ Optional properties:
  - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
 	or "usb3-phy".
  - resets: a single pair of phandle and reset specifier
+ - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
  - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
+ - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command
+			failure SW work-around for DWC_usb31 version 1.70a-ea06
+			and prior.
  - snps,disable_scramble_quirk: true when SW should disable data scrambling.
 	Only really useful for FPGA builds.
  - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled

drivers/usb/dwc2/gadget.c

@@ -262,7 +262,7 @@ static void dwc2_gadget_wkup_alert_handler(struct dwc2_hsotg *hsotg)
 	if (gintsts2 & GINTSTS2_WKUP_ALERT_INT) {
 		dev_dbg(hsotg->dev, "%s: Wkup_Alert_Int\n", __func__);
 		dwc2_clear_bit(hsotg, GINTSTS2, GINTSTS2_WKUP_ALERT_INT);
-		dwc2_set_bit(hsotg, DCFG, DCTL_RMTWKUPSIG);
+		dwc2_set_bit(hsotg, DCTL, DCTL_RMTWKUPSIG);
 	}
 }
 
@@ -3165,8 +3165,6 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg,
 		dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index);
 }
 
-static int dwc2_hsotg_ep_disable(struct usb_ep *ep);
-
 /**
  * dwc2_hsotg_disconnect - disconnect service
  * @hsotg: The device state.
@@ -3188,9 +3186,11 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg)
 	/* all endpoints should be shutdown */
 	for (ep = 0; ep < hsotg->num_of_eps; ep++) {
 		if (hsotg->eps_in[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+			kill_all_requests(hsotg, hsotg->eps_in[ep],
+					  -ESHUTDOWN);
 		if (hsotg->eps_out[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+			kill_all_requests(hsotg, hsotg->eps_out[ep],
+					  -ESHUTDOWN);
 	}
 
 	call_gadget(hsotg, disconnect);
@@ -3234,6 +3234,7 @@ static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic)
 			GINTSTS_PTXFEMP |  \
 			GINTSTS_RXFLVL)
 
+static int dwc2_hsotg_ep_disable(struct usb_ep *ep);
 /**
  * dwc2_hsotg_core_init - issue softreset to the core
  * @hsotg: The device state
@@ -4069,10 +4070,8 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
 	int dir_in = hs_ep->dir_in;
 	int index = hs_ep->index;
-	unsigned long flags;
 	u32 epctrl_reg;
 	u32 ctrl;
-	int locked;
 
 	dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep);
 
@@ -4088,10 +4087,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
 
 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
-	locked = spin_is_locked(&hsotg->lock);
-	if (!locked)
-		spin_lock_irqsave(&hsotg->lock, flags);
-
 	ctrl = dwc2_readl(hsotg, epctrl_reg);
 
 	if (ctrl & DXEPCTL_EPENA)
@@ -4114,12 +4109,22 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
 	hs_ep->fifo_index = 0;
 	hs_ep->fifo_size = 0;
 
-	if (!locked)
-		spin_unlock_irqrestore(&hsotg->lock, flags);
-
 	return 0;
 }
 
+static int dwc2_hsotg_ep_disable_lock(struct usb_ep *ep)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	ret = dwc2_hsotg_ep_disable(ep);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return ret;
+}
+
 /**
  * on_list - check request is on the given endpoint
  * @ep: The endpoint to check.
@@ -4267,7 +4272,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
 
 static const struct usb_ep_ops dwc2_hsotg_ep_ops = {
 	.enable		= dwc2_hsotg_ep_enable,
-	.disable	= dwc2_hsotg_ep_disable,
+	.disable	= dwc2_hsotg_ep_disable_lock,
 	.alloc_request	= dwc2_hsotg_ep_alloc_request,
 	.free_request	= dwc2_hsotg_ep_free_request,
 	.queue		= dwc2_hsotg_ep_queue_lock,
@@ -4407,9 +4412,9 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget)
 	/* all endpoints should be shutdown */
 	for (ep = 1; ep < hsotg->num_of_eps; ep++) {
 		if (hsotg->eps_in[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+			dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
 		if (hsotg->eps_out[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+			dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
 	}
 
 	spin_lock_irqsave(&hsotg->lock, flags);
@@ -4857,9 +4862,9 @@ int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg)
 
 		for (ep = 0; ep < hsotg->num_of_eps; ep++) {
 			if (hsotg->eps_in[ep])
-				dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+				dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
 			if (hsotg->eps_out[ep])
-				dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+				dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
 		}
 	}
 
@@ -5026,6 +5031,7 @@ void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg)
 	val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0;
 	val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT;
 	val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0;
+	val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC;
 	dwc2_writel(hsotg, val, GLPMCFG);
 	dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG));
 

drivers/usb/dwc2/hcd.h

@@ -366,7 +366,7 @@ struct dwc2_qh {
 	u32 desc_list_sz;
 	u32 *n_bytes;
 	struct timer_list unreserve_timer;
-	struct timer_list wait_timer;
+	struct hrtimer wait_timer;
 	struct dwc2_tt *dwc_tt;
 	int ttport;
 	unsigned tt_buffer_dirty:1;

drivers/usb/dwc2/hcd_queue.c

@@ -59,7 +59,7 @@
 #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
 
 /* If we get a NAK, wait this long before retrying */
-#define DWC2_RETRY_WAIT_DELAY (msecs_to_jiffies(1))
+#define DWC2_RETRY_WAIT_DELAY 1*1E6L
 
 /**
  * dwc2_periodic_channel_available() - Checks that a channel is available for a
@@ -1464,10 +1464,12 @@ static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
  * qh back to the "inactive" list, then queues transactions.
  *
  * @t: Pointer to wait_timer in a qh.
+ *
+ * Return: HRTIMER_NORESTART to not automatically restart this timer.
  */
-static void dwc2_wait_timer_fn(struct timer_list *t)
+static enum hrtimer_restart dwc2_wait_timer_fn(struct hrtimer *t)
 {
-	struct dwc2_qh *qh = from_timer(qh, t, wait_timer);
+	struct dwc2_qh *qh = container_of(t, struct dwc2_qh, wait_timer);
 	struct dwc2_hsotg *hsotg = qh->hsotg;
 	unsigned long flags;
 
@@ -1491,6 +1493,7 @@ static void dwc2_wait_timer_fn(struct timer_list *t)
 	}
 
 	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return HRTIMER_NORESTART;
 }
 
 /**
@@ -1521,7 +1524,8 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 	/* Initialize QH */
 	qh->hsotg = hsotg;
 	timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0);
-	timer_setup(&qh->wait_timer, dwc2_wait_timer_fn, 0);
+	hrtimer_init(&qh->wait_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	qh->wait_timer.function = &dwc2_wait_timer_fn;
 	qh->ep_type = ep_type;
 	qh->ep_is_in = ep_is_in;
 
@@ -1690,7 +1694,7 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 	 * won't do anything anyway, but we want it to finish before we free
 	 * memory.
 	 */
-	del_timer_sync(&qh->wait_timer);
+	hrtimer_cancel(&qh->wait_timer);
 
 	dwc2_host_put_tt_info(hsotg, qh->dwc_tt);
 
@@ -1716,6 +1720,7 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
 	int status;
 	u32 intr_mask;
+	ktime_t delay;
 
 	if (dbg_qh(qh))
 		dev_vdbg(hsotg->dev, "%s()\n", __func__);
@@ -1734,8 +1739,8 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 			list_add_tail(&qh->qh_list_entry,
 				      &hsotg->non_periodic_sched_waiting);
 			qh->wait_timer_cancel = false;
-			mod_timer(&qh->wait_timer,
-				  jiffies + DWC2_RETRY_WAIT_DELAY + 1);
+			delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
+			hrtimer_start(&qh->wait_timer, delay, HRTIMER_MODE_REL);
 		} else {
 			list_add_tail(&qh->qh_list_entry,
 				      &hsotg->non_periodic_sched_inactive);

drivers/usb/dwc2/hw.h

@@ -333,6 +333,8 @@
 #define GLPMCFG_SNDLPM			BIT(24)
 #define GLPMCFG_RETRY_CNT_MASK		(0x7 << 21)
 #define GLPMCFG_RETRY_CNT_SHIFT		21
+#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL	BIT(21)
+#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC	BIT(22)
 #define GLPMCFG_LPM_CHNL_INDX_MASK	(0xf << 17)
 #define GLPMCFG_LPM_CHNL_INDX_SHIFT	17
 #define GLPMCFG_L1RESUMEOK		BIT(16)

drivers/usb/dwc2/params.c

@@ -71,6 +71,13 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg)
 	p->power_down = false;
 }
 
+static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->power_down = 0;
+}
+
 static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_core_params *p = &hsotg->params;
@@ -111,6 +118,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
 	p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
 	p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 <<
 		GAHBCFG_HBSTLEN_SHIFT;
+	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
 }
 
 static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
@@ -151,7 +159,8 @@ const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params },
 	{ .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params },
 	{ .compatible = "snps,dwc2" },
-	{ .compatible = "samsung,s3c6400-hsotg" },
+	{ .compatible = "samsung,s3c6400-hsotg",
+	  .data = dwc2_set_s3c6400_params },
 	{ .compatible = "amlogic,meson8-usb",
 	  .data = dwc2_set_amlogic_params },
 	{ .compatible = "amlogic,meson8b-usb",

drivers/usb/dwc3/core.c

@@ -80,11 +80,12 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
 			mode = USB_DR_MODE_PERIPHERAL;
 
 		/*
-		 * dwc_usb31 does not support OTG mode. If the controller
-		 * supports DRD but the dr_mode is not specified or set to OTG,
-		 * then set the mode to peripheral.
+		 * DWC_usb31 and DWC_usb3 v3.30a and higher do not support OTG
+		 * mode. If the controller supports DRD but the dr_mode is not
+		 * specified or set to OTG, then set the mode to peripheral.
 		 */
-		if (mode == USB_DR_MODE_OTG && dwc3_is_usb31(dwc))
+		if (mode == USB_DR_MODE_OTG &&
+		    dwc->revision >= DWC3_REVISION_330A)
 			mode = USB_DR_MODE_PERIPHERAL;
 	}
 
@@ -661,6 +662,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 
 	if (dwc->dis_enblslpm_quirk)
 		reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+	else
+		reg |= DWC3_GUSB2PHYCFG_ENBLSLPM;
 
 	if (dwc->dis_u2_freeclk_exists_quirk)
 		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
@@ -702,6 +705,7 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
 		/* Detected DWC_usb31 IP */
 		dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
 		dwc->revision |= DWC3_REVISION_IS_DWC31;
+		dwc->version_type = dwc3_readl(dwc->regs, DWC3_VER_TYPE);
 	} else {
 		return false;
 	}
@@ -1244,8 +1248,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,is-utmi-l1-suspend");
 	device_property_read_u8(dev, "snps,hird-threshold",
 				&hird_threshold);
+	dwc->dis_start_transfer_quirk = device_property_read_bool(dev,
+				"snps,dis-start-transfer-quirk");
 	dwc->usb3_lpm_capable = device_property_read_bool(dev,
 				"snps,usb3_lpm_capable");
+	dwc->usb2_lpm_disable = device_property_read_bool(dev,
+				"snps,usb2-lpm-disable");
 	device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
 				&rx_thr_num_pkt_prd);
 	device_property_read_u8(dev, "snps,rx-max-burst-prd",
@@ -1482,7 +1490,8 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	ret = dwc3_core_init(dwc);
 	if (ret) {
-		dev_err(dev, "failed to initialize core\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to initialize core: %d\n", ret);
 		goto err4;
 	}
 

drivers/usb/dwc3/core.h

@@ -37,6 +37,7 @@
 #define DWC3_EP0_SETUP_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
 #define DWC3_XHCI_RESOURCES_NUM	2
+#define DWC3_ISOC_MAX_RETRIES	5
 
 #define DWC3_SCRATCHBUF_SIZE	4096	/* each buffer is assumed to be 4KiB */
 #define DWC3_EVENT_BUFFERS_SIZE	4096
@@ -174,13 +175,19 @@
 #define DWC3_GSBUSCFG0_INCRBRSTENA	(1 << 0) /* undefined length enable */
 #define DWC3_GSBUSCFG0_INCRBRST_MASK	0xff
 
+/* Global Debug LSP MUX Select */
+#define DWC3_GDBGLSPMUX_ENDBC		BIT(15)	/* Host only */
+#define DWC3_GDBGLSPMUX_HOSTSELECT(n)	((n) & 0x3fff)
+#define DWC3_GDBGLSPMUX_DEVSELECT(n)	(((n) & 0xf) << 4)
+#define DWC3_GDBGLSPMUX_EPSELECT(n)	((n) & 0xf)
+
 /* Global Debug Queue/FIFO Space Available Register */
 #define DWC3_GDBGFIFOSPACE_NUM(n)	((n) & 0x1f)
 #define DWC3_GDBGFIFOSPACE_TYPE(n)	(((n) << 5) & 0x1e0)
 #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
 
-#define DWC3_TXFIFOQ		0
-#define DWC3_RXFIFOQ		1
+#define DWC3_TXFIFO		0
+#define DWC3_RXFIFO		1
 #define DWC3_TXREQQ		2
 #define DWC3_RXREQQ		3
 #define DWC3_RXINFOQ		4
@@ -253,6 +260,9 @@
 #define DWC3_GSTS_DEVICE_IP	BIT(6)
 #define DWC3_GSTS_CSR_TIMEOUT	BIT(5)
 #define DWC3_GSTS_BUS_ERR_ADDR_VLD	BIT(4)
+#define DWC3_GSTS_CURMOD(n)	((n) & 0x3)
+#define DWC3_GSTS_CURMOD_DEVICE	0
+#define DWC3_GSTS_CURMOD_HOST	1
 
 /* Global USB2 PHY Configuration Register */
 #define DWC3_GUSB2PHYCFG_PHYSOFTRST	BIT(31)
@@ -321,6 +331,7 @@
 #define DWC3_GHWPARAMS1_EN_PWROPT_HIB	2
 #define DWC3_GHWPARAMS1_PWROPT(n)	((n) << 24)
 #define DWC3_GHWPARAMS1_PWROPT_MASK	DWC3_GHWPARAMS1_PWROPT(3)
+#define DWC3_GHWPARAMS1_ENDBC		BIT(31)
 
 /* Global HWPARAMS3 Register */
 #define DWC3_GHWPARAMS3_SSPHY_IFC(n)		((n) & 3)
@@ -636,9 +647,9 @@ struct dwc3_event_buffer {
 /**
  * struct dwc3_ep - device side endpoint representation
  * @endpoint: usb endpoint
+ * @cancelled_list: list of cancelled requests for this endpoint
  * @pending_list: list of pending requests for this endpoint
  * @started_list: list of started requests on this endpoint
- * @wait_end_transfer: wait_queue_head_t for waiting on End Transfer complete
  * @lock: spinlock for endpoint request queue traversal
  * @regs: pointer to first endpoint register
  * @trb_pool: array of transaction buffers
@@ -656,14 +667,17 @@ struct dwc3_event_buffer {
  * @name: a human readable name e.g. ep1out-bulk
  * @direction: true for TX, false for RX
  * @stream_capable: true when streams are enabled
+ * @combo_num: the test combination BIT[15:14] of the frame number to test
+ *		isochronous START TRANSFER command failure workaround
+ * @start_cmd_status: the status of testing START TRANSFER command with
+ *		combo_num = 'b00
  */
 struct dwc3_ep {
 	struct usb_ep		endpoint;
+	struct list_head	cancelled_list;
 	struct list_head	pending_list;
 	struct list_head	started_list;
 
-	wait_queue_head_t	wait_end_transfer;
-
 	spinlock_t		lock;
 	void __iomem		*regs;
 
@@ -705,6 +719,10 @@ struct dwc3_ep {
 
 	unsigned		direction:1;
 	unsigned		stream_capable:1;
+
+	/* For isochronous START TRANSFER workaround only */
+	u8			combo_num;
+	int			start_cmd_status;
 };
 
 enum dwc3_phy {
@@ -766,6 +784,7 @@ enum dwc3_link_state {
 #define DWC3_TRB_CTRL_ISP_IMI		BIT(10)
 #define DWC3_TRB_CTRL_IOC		BIT(11)
 #define DWC3_TRB_CTRL_SID_SOFN(n)	(((n) & 0xffff) << 14)
+#define DWC3_TRB_CTRL_GET_SID_SOFN(n)	(((n) & (0xffff << 14)) >> 14)
 
 #define DWC3_TRBCTL_TYPE(n)		((n) & (0x3f << 4))
 #define DWC3_TRBCTL_NORMAL		DWC3_TRB_CTRL_TRBCTL(1)
@@ -847,11 +866,12 @@ struct dwc3_hwparams {
  * @epnum: endpoint number to which this request refers
  * @trb: pointer to struct dwc3_trb
  * @trb_dma: DMA address of @trb
- * @unaligned: true for OUT endpoints with length not divisible by maxp
+ * @num_trbs: number of TRBs used by this request
+ * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP
+ *	or unaligned OUT)
  * @direction: IN or OUT direction flag
  * @mapped: true when request has been dma-mapped
  * @started: request is started
- * @zero: wants a ZLP
  */
 struct dwc3_request {
 	struct usb_request	request;
@@ -867,11 +887,12 @@ struct dwc3_request {
 	struct dwc3_trb		*trb;
 	dma_addr_t		trb_dma;
 
-	unsigned		unaligned:1;
+	unsigned		num_trbs;
+
+	unsigned		needs_extra_trb:1;
 	unsigned		direction:1;
 	unsigned		mapped:1;
 	unsigned		started:1;
-	unsigned		zero:1;
 };
 
 /*
@@ -918,6 +939,7 @@ struct dwc3_scratchpad_array {
  * @u1u2: only used on revisions <1.83a for workaround
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
  * @revision: revision register contents
+ * @version_type: VERSIONTYPE register contents, a sub release of a revision
  * @dr_mode: requested mode of operation
  * @current_dr_role: current role of operation when in dual-role mode
  * @desired_dr_role: desired role of operation when in dual-role mode
@@ -945,6 +967,7 @@ struct dwc3_scratchpad_array {
  * @hwparams: copy of hwparams registers
  * @root: debugfs root folder pointer
  * @regset: debugfs pointer to regdump file
+ * @dbg_lsp_select: current debug lsp mux register selection
  * @test_mode: true when we're entering a USB test mode
  * @test_mode_nr: test feature selector
  * @lpm_nyet_threshold: LPM NYET response threshold
@@ -970,7 +993,10 @@ struct dwc3_scratchpad_array {
  * @pullups_connected: true when Run/Stop bit is set
  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
  * @three_stage_setup: set if we perform a three phase setup
+ * @dis_start_transfer_quirk: set if start_transfer failure SW workaround is
+ *			not needed for DWC_usb31 version 1.70a-ea06 and below
  * @usb3_lpm_capable: set if hadrware supports Link Power Management
+ * @usb2_lpm_disable: set to disable usb2 lpm
  * @disable_scramble_quirk: set if we enable the disable scramble quirk
  * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
  * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
@@ -1095,6 +1121,7 @@ struct dwc3 {
 #define DWC3_REVISION_290A	0x5533290a
 #define DWC3_REVISION_300A	0x5533300a
 #define DWC3_REVISION_310A	0x5533310a
+#define DWC3_REVISION_330A	0x5533330a
 
 /*
  * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really
@@ -1103,6 +1130,17 @@ struct dwc3 {
 #define DWC3_REVISION_IS_DWC31		0x80000000
 #define DWC3_USB31_REVISION_110A	(0x3131302a | DWC3_REVISION_IS_DWC31)
 #define DWC3_USB31_REVISION_120A	(0x3132302a | DWC3_REVISION_IS_DWC31)
+#define DWC3_USB31_REVISION_160A	(0x3136302a | DWC3_REVISION_IS_DWC31)
+#define DWC3_USB31_REVISION_170A	(0x3137302a | DWC3_REVISION_IS_DWC31)
+
+	u32			version_type;
+
+#define DWC31_VERSIONTYPE_EA01		0x65613031
+#define DWC31_VERSIONTYPE_EA02		0x65613032
+#define DWC31_VERSIONTYPE_EA03		0x65613033
+#define DWC31_VERSIONTYPE_EA04		0x65613034
+#define DWC31_VERSIONTYPE_EA05		0x65613035
+#define DWC31_VERSIONTYPE_EA06		0x65613036
 
 	enum dwc3_ep0_next	ep0_next_event;
 	enum dwc3_ep0_state	ep0state;
@@ -1121,6 +1159,8 @@ struct dwc3 {
 	struct dentry		*root;
 	struct debugfs_regset32	*regset;
 
+	u32			dbg_lsp_select;
+
 	u8			test_mode;
 	u8			test_mode_nr;
 	u8			lpm_nyet_threshold;
@@ -1145,7 +1185,9 @@ struct dwc3 {
 	unsigned		pullups_connected:1;
 	unsigned		setup_packet_pending:1;
 	unsigned		three_stage_setup:1;
+	unsigned		dis_start_transfer_quirk:1;
 	unsigned		usb3_lpm_capable:1;
+	unsigned		usb2_lpm_disable:1;
 
 	unsigned		disable_scramble_quirk:1;
 	unsigned		u2exit_lfps_quirk:1;

drivers/usb/dwc3/debug.h

@@ -116,6 +116,35 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state)
 	}
 }
 
+/**
+ * dwc3_gadget_hs_link_string - returns highspeed and below link name
+ * @link_state: link state code
+ */
+static inline const char *
+dwc3_gadget_hs_link_string(enum dwc3_link_state link_state)
+{
+	switch (link_state) {
+	case DWC3_LINK_STATE_U0:
+		return "On";
+	case DWC3_LINK_STATE_U2:
+		return "Sleep";
+	case DWC3_LINK_STATE_U3:
+		return "Suspend";
+	case DWC3_LINK_STATE_SS_DIS:
+		return "Disconnected";
+	case DWC3_LINK_STATE_RX_DET:
+		return "Early Suspend";
+	case DWC3_LINK_STATE_RECOV:
+		return "Recovery";
+	case DWC3_LINK_STATE_RESET:
+		return "Reset";
+	case DWC3_LINK_STATE_RESUME:
+		return "Resume";
+	default:
+		return "UNKNOWN link state\n";
+	}
+}
+
 /**
  * dwc3_trb_type_string - returns TRB type as a string
  * @type: the type of the TRB

drivers/usb/dwc3/debugfs.c

@@ -25,6 +25,8 @@
 #include "io.h"
 #include "debug.h"
 
+#define DWC3_LSP_MUX_UNSELECTED 0xfffff
+
 #define dump_register(nm)				\
 {							\
 	.name	= __stringify(nm),			\
@@ -82,10 +84,6 @@ static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(GDBGFIFOSPACE),
 	dump_register(GDBGLTSSM),
 	dump_register(GDBGBMU),
-	dump_register(GDBGLSPMUX),
-	dump_register(GDBGLSP),
-	dump_register(GDBGEPINFO0),
-	dump_register(GDBGEPINFO1),
 	dump_register(GPRTBIMAP_HS0),
 	dump_register(GPRTBIMAP_HS1),
 	dump_register(GPRTBIMAP_FS0),
@@ -279,6 +277,114 @@ static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(OSTS),
 };
 
+static void dwc3_host_lsp(struct seq_file *s)
+{
+	struct dwc3		*dwc = s->private;
+	bool			dbc_enabled;
+	u32			sel;
+	u32			reg;
+	u32			val;
+
+	dbc_enabled = !!(dwc->hwparams.hwparams1 & DWC3_GHWPARAMS1_ENDBC);
+
+	sel = dwc->dbg_lsp_select;
+	if (sel == DWC3_LSP_MUX_UNSELECTED) {
+		seq_puts(s, "Write LSP selection to print for host\n");
+		return;
+	}
+
+	reg = DWC3_GDBGLSPMUX_HOSTSELECT(sel);
+
+	dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+	val = dwc3_readl(dwc->regs, DWC3_GDBGLSP);
+	seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", sel, val);
+
+	if (dbc_enabled && sel < 256) {
+		reg |= DWC3_GDBGLSPMUX_ENDBC;
+		dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+		val = dwc3_readl(dwc->regs, DWC3_GDBGLSP);
+		seq_printf(s, "GDBGLSP_DBC[%d] = 0x%08x\n", sel, val);
+	}
+}
+
+static void dwc3_gadget_lsp(struct seq_file *s)
+{
+	struct dwc3		*dwc = s->private;
+	int			i;
+	u32			reg;
+
+	for (i = 0; i < 16; i++) {
+		reg = DWC3_GDBGLSPMUX_DEVSELECT(i);
+		dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+		reg = dwc3_readl(dwc->regs, DWC3_GDBGLSP);
+		seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", i, reg);
+	}
+}
+
+static int dwc3_lsp_show(struct seq_file *s, void *unused)
+{
+	struct dwc3		*dwc = s->private;
+	unsigned int		current_mode;
+	unsigned long		flags;
+	u32			reg;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_GSTS);
+	current_mode = DWC3_GSTS_CURMOD(reg);
+
+	switch (current_mode) {
+	case DWC3_GSTS_CURMOD_HOST:
+		dwc3_host_lsp(s);
+		break;
+	case DWC3_GSTS_CURMOD_DEVICE:
+		dwc3_gadget_lsp(s);
+		break;
+	default:
+		seq_puts(s, "Mode is unknown, no LSP register printed\n");
+		break;
+	}
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+static int dwc3_lsp_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dwc3_lsp_show, inode->i_private);
+}
+
+static ssize_t dwc3_lsp_write(struct file *file, const char __user *ubuf,
+			      size_t count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc3		*dwc = s->private;
+	unsigned long		flags;
+	char			buf[32] = { 0 };
+	u32			sel;
+	int			ret;
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = kstrtouint(buf, 0, &sel);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc->dbg_lsp_select = sel;
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return count;
+}
+
+static const struct file_operations dwc3_lsp_fops = {
+	.open			= dwc3_lsp_open,
+	.write			= dwc3_lsp_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
 static int dwc3_mode_show(struct seq_file *s, void *unused)
 {
 	struct dwc3		*dwc = s->private;
@@ -433,13 +539,24 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused)
 	unsigned long		flags;
 	enum dwc3_link_state	state;
 	u32			reg;
+	u8			speed;
 
 	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_GSTS);
+	if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) {
+		seq_puts(s, "Not available\n");
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		return 0;
+	}
+
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 	state = DWC3_DSTS_USBLNKST(reg);
-	spin_unlock_irqrestore(&dwc->lock, flags);
+	speed = reg & DWC3_DSTS_CONNECTSPD;
 
-	seq_printf(s, "%s\n", dwc3_gadget_link_string(state));
+	seq_printf(s, "%s\n", (speed >= DWC3_DSTS_SUPERSPEED) ?
+		   dwc3_gadget_link_string(state) :
+		   dwc3_gadget_hs_link_string(state));
+	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
 }
@@ -457,6 +574,8 @@ static ssize_t dwc3_link_state_write(struct file *file,
 	unsigned long		flags;
 	enum dwc3_link_state	state = 0;
 	char			buf[32];
+	u32			reg;
+	u8			speed;
 
 	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 		return -EFAULT;
@@ -477,6 +596,21 @@ static ssize_t dwc3_link_state_write(struct file *file,
 		return -EINVAL;
 
 	spin_lock_irqsave(&dwc->lock, flags);
+	reg = dwc3_readl(dwc->regs, DWC3_GSTS);
+	if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) {
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		return -EINVAL;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+
+	if (speed < DWC3_DSTS_SUPERSPEED &&
+	    state != DWC3_LINK_STATE_RECOV) {
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		return -EINVAL;
+	}
+
 	dwc3_gadget_set_link_state(dwc, state);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
@@ -496,7 +630,7 @@ struct dwc3_ep_file_map {
 	const struct file_operations *const fops;
 };
 
-static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused)
+static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused)
 {
 	struct dwc3_ep		*dep = s->private;
 	struct dwc3		*dwc = dep->dwc;
@@ -504,14 +638,18 @@ static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused)
 	u32			val;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	val = dwc3_core_fifo_space(dep, DWC3_TXFIFOQ);
+	val = dwc3_core_fifo_space(dep, DWC3_TXFIFO);
+
+	/* Convert to bytes */
+	val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0);
+	val >>= 3;
 	seq_printf(s, "%u\n", val);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
 }
 
-static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused)
+static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused)
 {
 	struct dwc3_ep		*dep = s->private;
 	struct dwc3		*dwc = dep->dwc;
@@ -519,7 +657,11 @@ static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused)
 	u32			val;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	val = dwc3_core_fifo_space(dep, DWC3_RXFIFOQ);
+	val = dwc3_core_fifo_space(dep, DWC3_RXFIFO);
+
+	/* Convert to bytes */
+	val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0);
+	val >>= 3;
 	seq_printf(s, "%u\n", val);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
@@ -675,8 +817,32 @@ static int dwc3_trb_ring_show(struct seq_file *s, void *unused)
 	return 0;
 }
 
-DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_queue);
-DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_queue);
+static int dwc3_ep_info_register_show(struct seq_file *s, void *unused)
+{
+	struct dwc3_ep		*dep = s->private;
+	struct dwc3		*dwc = dep->dwc;
+	unsigned long		flags;
+	u64			ep_info;
+	u32			lower_32_bits;
+	u32			upper_32_bits;
+	u32			reg;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	reg = DWC3_GDBGLSPMUX_EPSELECT(dep->number);
+	dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg);
+
+	lower_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO0);
+	upper_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO1);
+
+	ep_info = ((u64)upper_32_bits << 32) | lower_32_bits;
+	seq_printf(s, "0x%016llx\n", ep_info);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_size);
+DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_size);
 DEFINE_SHOW_ATTRIBUTE(dwc3_tx_request_queue);
 DEFINE_SHOW_ATTRIBUTE(dwc3_rx_request_queue);
 DEFINE_SHOW_ATTRIBUTE(dwc3_rx_info_queue);
@@ -684,10 +850,11 @@ DEFINE_SHOW_ATTRIBUTE(dwc3_descriptor_fetch_queue);
 DEFINE_SHOW_ATTRIBUTE(dwc3_event_queue);
 DEFINE_SHOW_ATTRIBUTE(dwc3_transfer_type);
 DEFINE_SHOW_ATTRIBUTE(dwc3_trb_ring);
+DEFINE_SHOW_ATTRIBUTE(dwc3_ep_info_register);
 
 static const struct dwc3_ep_file_map dwc3_ep_file_map[] = {
-	{ "tx_fifo_queue", &dwc3_tx_fifo_queue_fops, },
-	{ "rx_fifo_queue", &dwc3_rx_fifo_queue_fops, },
+	{ "tx_fifo_size", &dwc3_tx_fifo_size_fops, },
+	{ "rx_fifo_size", &dwc3_rx_fifo_size_fops, },
 	{ "tx_request_queue", &dwc3_tx_request_queue_fops, },
 	{ "rx_request_queue", &dwc3_rx_request_queue_fops, },
 	{ "rx_info_queue", &dwc3_rx_info_queue_fops, },
@@ -695,6 +862,7 @@ static const struct dwc3_ep_file_map dwc3_ep_file_map[] = {
 	{ "event_queue", &dwc3_event_queue_fops, },
 	{ "transfer_type", &dwc3_transfer_type_fops, },
 	{ "trb_ring", &dwc3_trb_ring_fops, },
+	{ "GDBGEPINFO", &dwc3_ep_info_register_fops, },
 };
 
 static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep,
@@ -742,6 +910,8 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
 	if (!dwc->regset)
 		return;
 
+	dwc->dbg_lsp_select = DWC3_LSP_MUX_UNSELECTED;
+
 	dwc->regset->regs = dwc3_regs;
 	dwc->regset->nregs = ARRAY_SIZE(dwc3_regs);
 	dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START;
@@ -751,6 +921,9 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
 
 	debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset);
 
+	debugfs_create_file("lsp_dump", S_IRUGO | S_IWUSR, root, dwc,
+			    &dwc3_lsp_fops);
+
 	if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) {
 		debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc,
 				    &dwc3_mode_fops);

drivers/usb/dwc3/drd.c

@@ -10,6 +10,7 @@
 #include <linux/extcon.h>
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 
 #include "debug.h"
 #include "core.h"
@@ -445,9 +446,19 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	struct device *dev = dwc->dev;
 	struct device_node *np_phy, *np_conn;
 	struct extcon_dev *edev;
+	const char *name;
 
-	if (of_property_read_bool(dev->of_node, "extcon"))
-		return extcon_get_edev_by_phandle(dwc->dev, 0);
+	if (device_property_read_bool(dev, "extcon"))
+		return extcon_get_edev_by_phandle(dev, 0);
+
+	/*
+	 * Device tree platforms should get extcon via phandle.
+	 * On ACPI platforms, we get the name from a device property.
+	 * This device property is for kernel internal use only and
+	 * is expected to be set by the glue code.
+	 */
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+		return extcon_get_extcon_dev(name);
 
 	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
 	np_conn = of_graph_get_remote_node(np_phy, -1, -1);

drivers/usb/dwc3/dwc3-pci.c

@@ -170,20 +170,20 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			 * put the gpio descriptors again here because the phy driver
 			 * might want to grab them, too.
 			 */
-			gpio = devm_gpiod_get_optional(&pdev->dev, "cs",
-						       GPIOD_OUT_LOW);
+			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
 			if (IS_ERR(gpio))
 				return PTR_ERR(gpio);
 
 			gpiod_set_value_cansleep(gpio, 1);
+			gpiod_put(gpio);
 
-			gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
-						       GPIOD_OUT_LOW);
+			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
 			if (IS_ERR(gpio))
 				return PTR_ERR(gpio);
 
 			if (gpio) {
 				gpiod_set_value_cansleep(gpio, 1);
+				gpiod_put(gpio);
 				usleep_range(10000, 11000);
 			}
 		}

drivers/usb/dwc3/gadget.c

@@ -27,7 +27,7 @@
 #include "gadget.h"
 #include "io.h"
 
-#define DWC3_ALIGN_FRAME(d)	(((d)->frame_number + (d)->interval) \
+#define DWC3_ALIGN_FRAME(d, n)	(((d)->frame_number + ((d)->interval * (n))) \
 					& ~((d)->interval - 1))
 
 /**
@@ -647,8 +647,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
 		reg |= DWC3_DALEPENA_EP(dep->number);
 		dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 
-		init_waitqueue_head(&dep->wait_end_transfer);
-
 		if (usb_endpoint_xfer_control(desc))
 			goto out;
 
@@ -672,7 +670,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
 	 * Issue StartTransfer here with no-op TRB so we can always rely on No
 	 * Response Update Transfer command.
 	 */
-	if (usb_endpoint_xfer_bulk(desc) ||
+	if ((usb_endpoint_xfer_bulk(desc) && !dep->stream_capable) ||
 			usb_endpoint_xfer_int(desc)) {
 		struct dwc3_gadget_ep_cmd_params params;
 		struct dwc3_trb	*trb;
@@ -919,8 +917,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 	struct usb_gadget	*gadget = &dwc->gadget;
 	enum usb_device_speed	speed = gadget->speed;
 
-	dwc3_ep_inc_enq(dep);
-
 	trb->size = DWC3_TRB_SIZE_LENGTH(length);
 	trb->bpl = lower_32_bits(dma);
 	trb->bph = upper_32_bits(dma);
@@ -990,16 +986,20 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 				usb_endpoint_type(dep->endpoint.desc));
 	}
 
-	/* always enable Continue on Short Packet */
+	/*
+	 * Enable Continue on Short Packet
+	 * when endpoint is not a stream capable
+	 */
 	if (usb_endpoint_dir_out(dep->endpoint.desc)) {
-		trb->ctrl |= DWC3_TRB_CTRL_CSP;
+		if (!dep->stream_capable)
+			trb->ctrl |= DWC3_TRB_CTRL_CSP;
 
 		if (short_not_ok)
 			trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 	}
 
 	if ((!no_interrupt && !chain) ||
-			(dwc3_calc_trbs_left(dep) == 0))
+			(dwc3_calc_trbs_left(dep) == 1))
 		trb->ctrl |= DWC3_TRB_CTRL_IOC;
 
 	if (chain)
@@ -1010,6 +1010,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
+	dwc3_ep_inc_enq(dep);
+
 	trace_dwc3_prepare_trb(dep, trb);
 }
 
@@ -1046,6 +1048,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 		req->trb_dma = dwc3_trb_dma_offset(dep, trb);
 	}
 
+	req->num_trbs++;
+
 	__dwc3_prepare_one_trb(dep, trb, dma, length, chain, node,
 			stream_id, short_not_ok, no_interrupt);
 }
@@ -1073,13 +1077,14 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 			struct dwc3	*dwc = dep->dwc;
 			struct dwc3_trb	*trb;
 
-			req->unaligned = true;
+			req->needs_extra_trb = true;
 
 			/* prepare normal TRB */
 			dwc3_prepare_one_trb(dep, req, true, i);
 
 			/* Now prepare one extra TRB to align transfer size */
 			trb = &dep->trb_pool[dep->trb_enqueue];
+			req->num_trbs++;
 			__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr,
 					maxp - rem, false, 1,
 					req->request.stream_id,
@@ -1117,13 +1122,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 		struct dwc3	*dwc = dep->dwc;
 		struct dwc3_trb	*trb;
 
-		req->unaligned = true;
+		req->needs_extra_trb = true;
 
 		/* prepare normal TRB */
 		dwc3_prepare_one_trb(dep, req, true, 0);
 
 		/* Now prepare one extra TRB to align transfer size */
 		trb = &dep->trb_pool[dep->trb_enqueue];
+		req->num_trbs++;
 		__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem,
 				false, 1, req->request.stream_id,
 				req->request.short_not_ok,
@@ -1133,13 +1139,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 		struct dwc3	*dwc = dep->dwc;
 		struct dwc3_trb	*trb;
 
-		req->zero = true;
+		req->needs_extra_trb = true;
 
 		/* prepare normal TRB */
 		dwc3_prepare_one_trb(dep, req, true, 0);
 
 		/* Now prepare one extra TRB to handle ZLP */
 		trb = &dep->trb_pool[dep->trb_enqueue];
+		req->num_trbs++;
 		__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
 				false, 1, req->request.stream_id,
 				req->request.short_not_ok,
@@ -1232,6 +1239,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
 		params.param1 = lower_32_bits(req->trb_dma);
 		cmd = DWC3_DEPCMD_STARTTRANSFER;
 
+		if (dep->stream_capable)
+			cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id);
+
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
 			cmd |= DWC3_DEPCMD_PARAM(dep->frame_number);
 	} else {
@@ -1263,17 +1273,151 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc)
 	return DWC3_DSTS_SOFFN(reg);
 }
 
-static void __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
+/**
+ * dwc3_gadget_start_isoc_quirk - workaround invalid frame number
+ * @dep: isoc endpoint
+ *
+ * This function tests for the correct combination of BIT[15:14] from the 16-bit
+ * microframe number reported by the XferNotReady event for the future frame
+ * number to start the isoc transfer.
+ *
+ * In DWC_usb31 version 1.70a-ea06 and prior, for highspeed and fullspeed
+ * isochronous IN, BIT[15:14] of the 16-bit microframe number reported by the
+ * XferNotReady event are invalid. The driver uses this number to schedule the
+ * isochronous transfer and passes it to the START TRANSFER command. Because
+ * this number is invalid, the command may fail. If BIT[15:14] matches the
+ * internal 16-bit microframe, the START TRANSFER command will pass and the
+ * transfer will start at the scheduled time, if it is off by 1, the command
+ * will still pass, but the transfer will start 2 seconds in the future. For all
+ * other conditions, the START TRANSFER command will fail with bus-expiry.
+ *
+ * In order to workaround this issue, we can test for the correct combination of
+ * BIT[15:14] by sending START TRANSFER commands with different values of
+ * BIT[15:14]: 'b00, 'b01, 'b10, and 'b11. Each combination is 2^14 uframe apart
+ * (or 2 seconds). 4 seconds into the future will result in a bus-expiry status.
+ * As the result, within the 4 possible combinations for BIT[15:14], there will
+ * be 2 successful and 2 failure START COMMAND status. One of the 2 successful
+ * command status will result in a 2-second delay start. The smaller BIT[15:14]
+ * value is the correct combination.
+ *
+ * Since there are only 4 outcomes and the results are ordered, we can simply
+ * test 2 START TRANSFER commands with BIT[15:14] combinations 'b00 and 'b01 to
+ * deduce the smaller successful combination.
+ *
+ * Let test0 = test status for combination 'b00 and test1 = test status for 'b01
+ * of BIT[15:14]. The correct combination is as follow:
+ *
+ * if test0 fails and test1 passes, BIT[15:14] is 'b01
+ * if test0 fails and test1 fails, BIT[15:14] is 'b10
+ * if test0 passes and test1 fails, BIT[15:14] is 'b11
+ * if test0 passes and test1 passes, BIT[15:14] is 'b00
+ *
+ * Synopsys STAR 9001202023: Wrong microframe number for isochronous IN
+ * endpoints.
+ */
+static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep)
+{
+	int cmd_status = 0;
+	bool test0;
+	bool test1;
+
+	while (dep->combo_num < 2) {
+		struct dwc3_gadget_ep_cmd_params params;
+		u32 test_frame_number;
+		u32 cmd;
+
+		/*
+		 * Check if we can start isoc transfer on the next interval or
+		 * 4 uframes in the future with BIT[15:14] as dep->combo_num
+		 */
+		test_frame_number = dep->frame_number & 0x3fff;
+		test_frame_number |= dep->combo_num << 14;
+		test_frame_number += max_t(u32, 4, dep->interval);
+
+		params.param0 = upper_32_bits(dep->dwc->bounce_addr);
+		params.param1 = lower_32_bits(dep->dwc->bounce_addr);
+
+		cmd = DWC3_DEPCMD_STARTTRANSFER;
+		cmd |= DWC3_DEPCMD_PARAM(test_frame_number);
+		cmd_status = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+
+		/* Redo if some other failure beside bus-expiry is received */
+		if (cmd_status && cmd_status != -EAGAIN) {
+			dep->start_cmd_status = 0;
+			dep->combo_num = 0;
+			return 0;
+		}
+
+		/* Store the first test status */
+		if (dep->combo_num == 0)
+			dep->start_cmd_status = cmd_status;
+
+		dep->combo_num++;
+
+		/*
+		 * End the transfer if the START_TRANSFER command is successful
+		 * to wait for the next XferNotReady to test the command again
+		 */
+		if (cmd_status == 0) {
+			dwc3_stop_active_transfer(dep, true);
+			return 0;
+		}
+	}
+
+	/* test0 and test1 are both completed at this point */
+	test0 = (dep->start_cmd_status == 0);
+	test1 = (cmd_status == 0);
+
+	if (!test0 && test1)
+		dep->combo_num = 1;
+	else if (!test0 && !test1)
+		dep->combo_num = 2;
+	else if (test0 && !test1)
+		dep->combo_num = 3;
+	else if (test0 && test1)
+		dep->combo_num = 0;
+
+	dep->frame_number &= 0x3fff;
+	dep->frame_number |= dep->combo_num << 14;
+	dep->frame_number += max_t(u32, 4, dep->interval);
+
+	/* Reinitialize test variables */
+	dep->start_cmd_status = 0;
+	dep->combo_num = 0;
+
+	return __dwc3_gadget_kick_transfer(dep);
+}
+
+static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
 {
+	struct dwc3 *dwc = dep->dwc;
+	int ret;
+	int i;
+
 	if (list_empty(&dep->pending_list)) {
-		dev_info(dep->dwc->dev, "%s: ran out of requests\n",
-				dep->name);
 		dep->flags |= DWC3_EP_PENDING_REQUEST;
-		return;
+		return -EAGAIN;
+	}
+
+	if (!dwc->dis_start_transfer_quirk && dwc3_is_usb31(dwc) &&
+	    (dwc->revision <= DWC3_USB31_REVISION_160A ||
+	     (dwc->revision == DWC3_USB31_REVISION_170A &&
+	      dwc->version_type >= DWC31_VERSIONTYPE_EA01 &&
+	      dwc->version_type <= DWC31_VERSIONTYPE_EA06))) {
+
+		if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction)
+			return dwc3_gadget_start_isoc_quirk(dep);
 	}
 
-	dep->frame_number = DWC3_ALIGN_FRAME(dep);
-	__dwc3_gadget_kick_transfer(dep);
+	for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) {
+		dep->frame_number = DWC3_ALIGN_FRAME(dep, i + 1);
+
+		ret = __dwc3_gadget_kick_transfer(dep);
+		if (ret != -EAGAIN)
+			break;
+	}
+
+	return ret;
 }
 
 static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
@@ -1314,8 +1458,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 
 		if ((dep->flags & DWC3_EP_PENDING_REQUEST)) {
 			if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) {
-				__dwc3_gadget_start_isoc(dep);
-				return 0;
+				return __dwc3_gadget_start_isoc(dep);
 			}
 		}
 	}
@@ -1341,6 +1484,40 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
 	return ret;
 }
 
+static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	int i;
+
+	/*
+	 * If request was already started, this means we had to
+	 * stop the transfer. With that we also need to ignore
+	 * all TRBs used by the request, however TRBs can only
+	 * be modified after completion of END_TRANSFER
+	 * command. So what we do here is that we wait for
+	 * END_TRANSFER completion and only after that, we jump
+	 * over TRBs by clearing HWO and incrementing dequeue
+	 * pointer.
+	 */
+	for (i = 0; i < req->num_trbs; i++) {
+		struct dwc3_trb *trb;
+
+		trb = req->trb + i;
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+		dwc3_ep_inc_deq(dep);
+	}
+}
+
+static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
+{
+	struct dwc3_request		*req;
+	struct dwc3_request		*tmp;
+
+	list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) {
+		dwc3_gadget_ep_skip_trbs(dep, req);
+		dwc3_gadget_giveback(dep, req, -ECONNRESET);
+	}
+}
+
 static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		struct usb_request *request)
 {
@@ -1371,68 +1548,11 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 			/* wait until it is processed */
 			dwc3_stop_active_transfer(dep, true);
 
-			/*
-			 * If request was already started, this means we had to
-			 * stop the transfer. With that we also need to ignore
-			 * all TRBs used by the request, however TRBs can only
-			 * be modified after completion of END_TRANSFER
-			 * command. So what we do here is that we wait for
-			 * END_TRANSFER completion and only after that, we jump
-			 * over TRBs by clearing HWO and incrementing dequeue
-			 * pointer.
-			 *
-			 * Note that we have 2 possible types of transfers here:
-			 *
-			 * i) Linear buffer request
-			 * ii) SG-list based request
-			 *
-			 * SG-list based requests will have r->num_pending_sgs
-			 * set to a valid number (> 0). Linear requests,
-			 * normally use a single TRB.
-			 *
-			 * For each of these two cases, if r->unaligned flag is
-			 * set, one extra TRB has been used to align transfer
-			 * size to wMaxPacketSize.
-			 *
-			 * All of these cases need to be taken into
-			 * consideration so we don't mess up our TRB ring
-			 * pointers.
-			 */
-			wait_event_lock_irq(dep->wait_end_transfer,
-					!(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
-					dwc->lock);
-
 			if (!r->trb)
 				goto out0;
 
-			if (r->num_pending_sgs) {
-				struct dwc3_trb *trb;
-				int i = 0;
-
-				for (i = 0; i < r->num_pending_sgs; i++) {
-					trb = r->trb + i;
-					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
-					dwc3_ep_inc_deq(dep);
-				}
-
-				if (r->unaligned || r->zero) {
-					trb = r->trb + r->num_pending_sgs + 1;
-					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
-					dwc3_ep_inc_deq(dep);
-				}
-			} else {
-				struct dwc3_trb *trb = r->trb;
-
-				trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
-				dwc3_ep_inc_deq(dep);
-
-				if (r->unaligned || r->zero) {
-					trb = r->trb + 1;
-					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
-					dwc3_ep_inc_deq(dep);
-				}
-			}
-			goto out1;
+			dwc3_gadget_move_cancelled_request(req);
+			goto out0;
 		}
 		dev_err(dwc->dev, "request %pK was not queued to %s\n",
 				request, ep->name);
@@ -1440,9 +1560,6 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		goto out0;
 	}
 
-out1:
-	/* giveback the request */
-
 	dwc3_gadget_giveback(dep, req, -ECONNRESET);
 
 out0:
@@ -1934,8 +2051,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
 	unsigned long		flags;
-	int			epnum;
-	u32			tmo_eps = 0;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
@@ -1944,36 +2059,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
 
 	__dwc3_gadget_stop(dwc);
 
-	for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
-		struct dwc3_ep  *dep = dwc->eps[epnum];
-		int ret;
-
-		if (!dep)
-			continue;
-
-		if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
-			continue;
-
-		ret = wait_event_interruptible_lock_irq_timeout(dep->wait_end_transfer,
-			    !(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
-			    dwc->lock, msecs_to_jiffies(5));
-
-		if (ret <= 0) {
-			/* Timed out or interrupted! There's nothing much
-			 * we can do so we just log here and print which
-			 * endpoints timed out at the end.
-			 */
-			tmo_eps |= 1 << epnum;
-			dep->flags &= DWC3_EP_END_TRANSFER_PENDING;
-		}
-	}
-
-	if (tmo_eps) {
-		dev_err(dwc->dev,
-			"end transfer timed out on endpoints 0x%x [bitmap]\n",
-			tmo_eps);
-	}
-
 out:
 	dwc->gadget_driver	= NULL;
 	spin_unlock_irqrestore(&dwc->lock, flags);
@@ -2148,6 +2233,8 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum)
 	dep->direction = direction;
 	dep->regs = dwc->regs + DWC3_DEP_BASE(epnum);
 	dwc->eps[epnum] = dep;
+	dep->combo_num = 0;
+	dep->start_cmd_status = 0;
 
 	snprintf(dep->name, sizeof(dep->name), "ep%u%s", num,
 			direction ? "in" : "out");
@@ -2176,6 +2263,7 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum)
 
 	INIT_LIST_HEAD(&dep->pending_list);
 	INIT_LIST_HEAD(&dep->started_list);
+	INIT_LIST_HEAD(&dep->cancelled_list);
 
 	return 0;
 }
@@ -2235,6 +2323,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
 	dwc3_ep_inc_deq(dep);
 
 	trace_dwc3_complete_trb(dep, trb);
+	req->num_trbs--;
 
 	/*
 	 * If we're in the middle of series of chained TRBs and we
@@ -2249,12 +2338,26 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
 	if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
 		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 
+	/*
+	 * For isochronous transfers, the first TRB in a service interval must
+	 * have the Isoc-First type. Track and report its interval frame number.
+	 */
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+	    (trb->ctrl & DWC3_TRBCTL_ISOCHRONOUS_FIRST)) {
+		unsigned int frame_number;
+
+		frame_number = DWC3_TRB_CTRL_GET_SID_SOFN(trb->ctrl);
+		frame_number &= ~(dep->interval - 1);
+		req->request.frame_number = frame_number;
+	}
+
 	/*
 	 * If we're dealing with unaligned size OUT transfer, we will be left
 	 * with one TRB pending in the ring. We need to manually clear HWO bit
 	 * from that TRB.
 	 */
-	if ((req->zero || req->unaligned) && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) {
+
+	if (req->needs_extra_trb && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) {
 		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 		return 1;
 	}
@@ -2331,11 +2434,10 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 		ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
 				status);
 
-	if (req->unaligned || req->zero) {
+	if (req->needs_extra_trb) {
 		ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
 				status);
-		req->unaligned = false;
-		req->zero = false;
+		req->needs_extra_trb = false;
 	}
 
 	req->request.actual = req->request.length - req->remaining;
@@ -2430,7 +2532,7 @@ static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep,
 		const struct dwc3_event_depevt *event)
 {
 	dwc3_gadget_endpoint_frame_from_event(dep, event);
-	__dwc3_gadget_start_isoc(dep);
+	(void) __dwc3_gadget_start_isoc(dep);
 }
 
 static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
@@ -2468,7 +2570,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 
 		if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
 			dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
-			wake_up(&dep->wait_end_transfer);
+			dwc3_gadget_ep_cleanup_cancelled_requests(dep);
 		}
 		break;
 	case DWC3_DEPEVT_STREAMEVT:

drivers/usb/dwc3/gadget.h

@@ -79,6 +79,21 @@ static inline void dwc3_gadget_move_started_request(struct dwc3_request *req)
 	list_move_tail(&req->list, &dep->started_list);
 }
 
+/**
+ * dwc3_gadget_move_cancelled_request - move @req to the cancelled_list
+ * @req: the request to be moved
+ *
+ * Caller should take care of locking. This function will move @req from its
+ * current list to the endpoint's cancelled_list.
+ */
+static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req)
+{
+	struct dwc3_ep		*dep = req->dep;
+
+	req->started = false;
+	list_move_tail(&req->list, &dep->cancelled_list);
+}
+
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		int status);
 

drivers/usb/dwc3/host.c

@@ -46,7 +46,7 @@ static int dwc3_host_get_irq(struct dwc3 *dwc)
 
 int dwc3_host_init(struct dwc3 *dwc)
 {
-	struct property_entry	props[3];
+	struct property_entry	props[4];
 	struct platform_device	*xhci;
 	int			ret, irq;
 	struct resource		*res;
@@ -93,6 +93,9 @@ int dwc3_host_init(struct dwc3 *dwc)
 	if (dwc->usb3_lpm_capable)
 		props[prop_idx++].name = "usb3-lpm-capable";
 
+	if (dwc->usb2_lpm_disable)
+		props[prop_idx++].name = "usb2-lpm-disable";
+
 	/**
 	 * WORKAROUND: dwc3 revisions <=3.00a have a limitation
 	 * where Port Disable command doesn't work.

drivers/usb/dwc3/trace.h

@@ -199,7 +199,7 @@ DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd,
 		__entry->param2 = params->param2;
 		__entry->cmd_status = cmd_status;
 	),
-	TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x --> status: %s",
+	TP_printk("%s: cmd '%s' [%x] params %08x %08x %08x --> status: %s",
 		__get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd),
 		__entry->cmd, __entry->param0,
 		__entry->param1, __entry->param2,
@@ -251,9 +251,11 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
 				s = "2x ";
 				break;
 			case 3:
+			default:
 				s = "3x ";
 				break;
 			}
+			break;
 		default:
 			s = "";
 		} s; }),

drivers/usb/gadget/function/f_fs.c

@@ -18,11 +18,15 @@
 #include <linux/pagemap.h>
 #include <linux/export.h>
 #include <linux/hid.h>
+#include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/scatterlist.h>
 #include <linux/sched/signal.h>
 #include <linux/uio.h>
+#include <linux/vmalloc.h>
 #include <asm/unaligned.h>
 
+#include <linux/usb/ccid.h>
 #include <linux/usb/composite.h>
 #include <linux/usb/functionfs.h>
 
@@ -218,6 +222,8 @@ struct ffs_io_data {
 
 	struct usb_ep *ep;
 	struct usb_request *req;
+	struct sg_table sgt;
+	bool use_sg;
 
 	struct ffs_data *ffs;
 };
@@ -749,6 +755,65 @@ static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter)
 	return ret;
 }
 
+/*
+ * allocate a virtually contiguous buffer and create a scatterlist describing it
+ * @sg_table	- pointer to a place to be filled with sg_table contents
+ * @size	- required buffer size
+ */
+static void *ffs_build_sg_list(struct sg_table *sgt, size_t sz)
+{
+	struct page **pages;
+	void *vaddr, *ptr;
+	unsigned int n_pages;
+	int i;
+
+	vaddr = vmalloc(sz);
+	if (!vaddr)
+		return NULL;
+
+	n_pages = PAGE_ALIGN(sz) >> PAGE_SHIFT;
+	pages = kvmalloc_array(n_pages, sizeof(struct page *), GFP_KERNEL);
+	if (!pages) {
+		vfree(vaddr);
+
+		return NULL;
+	}
+	for (i = 0, ptr = vaddr; i < n_pages; ++i, ptr += PAGE_SIZE)
+		pages[i] = vmalloc_to_page(ptr);
+
+	if (sg_alloc_table_from_pages(sgt, pages, n_pages, 0, sz, GFP_KERNEL)) {
+		kvfree(pages);
+		vfree(vaddr);
+
+		return NULL;
+	}
+	kvfree(pages);
+
+	return vaddr;
+}
+
+static inline void *ffs_alloc_buffer(struct ffs_io_data *io_data,
+	size_t data_len)
+{
+	if (io_data->use_sg)
+		return ffs_build_sg_list(&io_data->sgt, data_len);
+
+	return kmalloc(data_len, GFP_KERNEL);
+}
+
+static inline void ffs_free_buffer(struct ffs_io_data *io_data)
+{
+	if (!io_data->buf)
+		return;
+
+	if (io_data->use_sg) {
+		sg_free_table(&io_data->sgt);
+		vfree(io_data->buf);
+	} else {
+		kfree(io_data->buf);
+	}
+}
+
 static void ffs_user_copy_worker(struct work_struct *work)
 {
 	struct ffs_io_data *io_data = container_of(work, struct ffs_io_data,
@@ -776,7 +841,7 @@ static void ffs_user_copy_worker(struct work_struct *work)
 
 	if (io_data->read)
 		kfree(io_data->to_free);
-	kfree(io_data->buf);
+	ffs_free_buffer(io_data);
 	kfree(io_data);
 }
 
@@ -932,6 +997,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 		 * earlier
 		 */
 		gadget = epfile->ffs->gadget;
+		io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE;
 
 		spin_lock_irq(&epfile->ffs->eps_lock);
 		/* In the meantime, endpoint got disabled or changed. */
@@ -948,7 +1014,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 			data_len = usb_ep_align_maybe(gadget, ep->ep, data_len);
 		spin_unlock_irq(&epfile->ffs->eps_lock);
 
-		data = kmalloc(data_len, GFP_KERNEL);
+		data = ffs_alloc_buffer(io_data, data_len);
 		if (unlikely(!data)) {
 			ret = -ENOMEM;
 			goto error_mutex;
@@ -988,8 +1054,16 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 		bool interrupted = false;
 
 		req = ep->req;
-		req->buf      = data;
-		req->length   = data_len;
+		if (io_data->use_sg) {
+			req->buf = NULL;
+			req->sg	= io_data->sgt.sgl;
+			req->num_sgs = io_data->sgt.nents;
+		} else {
+			req->buf = data;
+		}
+		req->length = data_len;
+
+		io_data->buf = data;
 
 		req->context  = &done;
 		req->complete = ffs_epfile_io_complete;
@@ -1022,8 +1096,14 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 	} else if (!(req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC))) {
 		ret = -ENOMEM;
 	} else {
-		req->buf      = data;
-		req->length   = data_len;
+		if (io_data->use_sg) {
+			req->buf = NULL;
+			req->sg	= io_data->sgt.sgl;
+			req->num_sgs = io_data->sgt.nents;
+		} else {
+			req->buf = data;
+		}
+		req->length = data_len;
 
 		io_data->buf = data;
 		io_data->ep = ep->ep;
@@ -1052,7 +1132,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 error_mutex:
 	mutex_unlock(&epfile->mutex);
 error:
-	kfree(data);
+	ffs_free_buffer(io_data);
 	return ret;
 }
 
@@ -1926,7 +2006,7 @@ typedef int (*ffs_os_desc_callback)(enum ffs_os_desc_type entity,
 
 static int __must_check ffs_do_single_desc(char *data, unsigned len,
 					   ffs_entity_callback entity,
-					   void *priv)
+					   void *priv, int *current_class)
 {
 	struct usb_descriptor_header *_ds = (void *)data;
 	u8 length;
@@ -1984,6 +2064,7 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len,
 		__entity(INTERFACE, ds->bInterfaceNumber);
 		if (ds->iInterface)
 			__entity(STRING, ds->iInterface);
+		*current_class = ds->bInterfaceClass;
 	}
 		break;
 
@@ -1997,11 +2078,22 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len,
 	}
 		break;
 
-	case HID_DT_HID:
-		pr_vdebug("hid descriptor\n");
-		if (length != sizeof(struct hid_descriptor))
-			goto inv_length;
-		break;
+	case USB_TYPE_CLASS | 0x01:
+                if (*current_class == USB_INTERFACE_CLASS_HID) {
+			pr_vdebug("hid descriptor\n");
+			if (length != sizeof(struct hid_descriptor))
+				goto inv_length;
+			break;
+		} else if (*current_class == USB_INTERFACE_CLASS_CCID) {
+			pr_vdebug("ccid descriptor\n");
+			if (length != sizeof(struct ccid_descriptor))
+				goto inv_length;
+			break;
+		} else {
+			pr_vdebug("unknown descriptor: %d for class %d\n",
+			      _ds->bDescriptorType, *current_class);
+			return -EINVAL;
+		}
 
 	case USB_DT_OTG:
 		if (length != sizeof(struct usb_otg_descriptor))
@@ -2058,6 +2150,7 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 {
 	const unsigned _len = len;
 	unsigned long num = 0;
+	int current_class = -1;
 
 	ENTER();
 
@@ -2078,7 +2171,8 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 		if (!data)
 			return _len - len;
 
-		ret = ffs_do_single_desc(data, len, entity, priv);
+		ret = ffs_do_single_desc(data, len, entity, priv,
+			&current_class);
 		if (unlikely(ret < 0)) {
 			pr_debug("%s returns %d\n", __func__, ret);
 			return ret;

drivers/usb/gadget/function/uvc_queue.c

@@ -102,7 +102,7 @@ static void uvc_buffer_queue(struct vb2_buffer *vb)
 	spin_unlock_irqrestore(&queue->irqlock, flags);
 }
 
-static struct vb2_ops uvc_queue_qops = {
+static const struct vb2_ops uvc_queue_qops = {
 	.queue_setup = uvc_queue_setup,
 	.buf_prepare = uvc_buffer_prepare,
 	.buf_queue = uvc_buffer_queue,

drivers/usb/gadget/udc/aspeed-vhub/dev.c

@@ -438,7 +438,7 @@ static int ast_vhub_udc_stop(struct usb_gadget *gadget)
 	return 0;
 }
 
-static struct usb_gadget_ops ast_vhub_udc_ops = {
+static const struct usb_gadget_ops ast_vhub_udc_ops = {
 	.get_frame	= ast_vhub_udc_get_frame,
 	.wakeup		= ast_vhub_udc_wakeup,
 	.pullup		= ast_vhub_udc_pullup,

drivers/usb/gadget/udc/renesas_usb3.c

@@ -358,6 +358,7 @@ struct renesas_usb3 {
 	bool extcon_host;		/* check id and set EXTCON_USB_HOST */
 	bool extcon_usb;		/* check vbus and set EXTCON_USB */
 	bool forced_b_device;
+	bool start_to_connect;
 };
 
 #define gadget_to_renesas_usb3(_gadget)	\
@@ -476,7 +477,8 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
 static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
 {
 	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
-	usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
+	if (!usb3->workaround_for_vbus)
+		usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
 }
 
 static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3)
@@ -700,8 +702,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
 	usb3_set_mode_by_role_sw(usb3, host);
 	usb3_vbus_out(usb3, a_dev);
 	/* for A-Peripheral or forced B-device mode */
-	if ((!host && a_dev) ||
-	    (usb3->workaround_for_vbus && usb3->forced_b_device))
+	if ((!host && a_dev) || usb3->start_to_connect)
 		usb3_connect(usb3);
 	spin_unlock_irqrestore(&usb3->lock, flags);
 }
@@ -2432,7 +2433,11 @@ static ssize_t renesas_usb3_b_device_write(struct file *file,
 	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 		return -EFAULT;
 
-	if (!strncmp(buf, "1", 1))
+	usb3->start_to_connect = false;
+	if (usb3->workaround_for_vbus && usb3->forced_b_device &&
+	    !strncmp(buf, "2", 1))
+		usb3->start_to_connect = true;
+	else if (!strncmp(buf, "1", 1))
 		usb3->forced_b_device = true;
 	else
 		usb3->forced_b_device = false;
@@ -2440,7 +2445,7 @@ static ssize_t renesas_usb3_b_device_write(struct file *file,
 	if (usb3->workaround_for_vbus)
 		usb3_disconnect(usb3);
 
-	/* Let this driver call usb3_connect() anyway */
+	/* Let this driver call usb3_connect() if needed */
 	usb3_check_id(usb3);
 
 	return count;

drivers/usb/gadget/udc/s3c2410_udc.c

@@ -119,7 +119,7 @@ static void dprintk(int level, const char *fmt, ...)
 }
 #endif
 
-static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
+static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p)
 {
 	u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg;
 	u32 ep_int_en_reg, usb_int_en_reg, ep0_csr;
@@ -168,20 +168,7 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
 
 	return 0;
 }
-
-static int s3c2410_udc_debugfs_fops_open(struct inode *inode,
-					 struct file *file)
-{
-	return single_open(file, s3c2410_udc_debugfs_seq_show, NULL);
-}
-
-static const struct file_operations s3c2410_udc_debugfs_fops = {
-	.open		= s3c2410_udc_debugfs_fops_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
+DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs);
 
 /* io macros */
 

drivers/usb/mtu3/mtu3_qmu.c

@@ -402,7 +402,7 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum)
 		return;
 	}
 
-	dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, mreq);
+	dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, req);
 
 	mtu3_clrbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN);
 

drivers/usb/renesas_usbhs/common.c

@@ -874,24 +874,7 @@ static int usbhsc_resume(struct device *dev)
 	return 0;
 }
 
-static int usbhsc_runtime_nop(struct device *dev)
-{
-	/* Runtime PM callback shared between ->runtime_suspend()
-	 * and ->runtime_resume(). Simply returns success.
-	 *
-	 * This driver re-initializes all registers after
-	 * pm_runtime_get_sync() anyway so there is no need
-	 * to save and restore registers here.
-	 */
-	return 0;
-}
-
-static const struct dev_pm_ops usbhsc_pm_ops = {
-	.suspend		= usbhsc_suspend,
-	.resume			= usbhsc_resume,
-	.runtime_suspend	= usbhsc_runtime_nop,
-	.runtime_resume		= usbhsc_runtime_nop,
-};
+static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume);
 
 static struct platform_driver renesas_usbhs_driver = {
 	.driver		= {

include/linux/usb/ccid.h

+/*
+ *  Copyright (c) 2018  Vincent Pelletier
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __CCID_H
+#define __CCID_H
+
+#include <linux/types.h>
+
+#define USB_INTERFACE_CLASS_CCID 0x0b
+
+struct ccid_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__le16 bcdCCID;
+	__u8  bMaxSlotIndex;
+	__u8  bVoltageSupport;
+	__le32 dwProtocols;
+	__le32 dwDefaultClock;
+	__le32 dwMaximumClock;
+	__u8  bNumClockSupported;
+	__le32 dwDataRate;
+	__le32 dwMaxDataRate;
+	__u8  bNumDataRatesSupported;
+	__le32 dwMaxIFSD;
+	__le32 dwSynchProtocols;
+	__le32 dwMechanical;
+	__le32 dwFeatures;
+	__le32 dwMaxCCIDMessageLength;
+	__u8  bClassGetResponse;
+	__u8  bClassEnvelope;
+	__le16 wLcdLayout;
+	__u8  bPINSupport;
+	__u8  bMaxCCIDBusySlots;
+} __attribute__ ((packed));
+
+#endif /* __CCID_H */

include/linux/usb/gadget.h

@@ -61,6 +61,8 @@ struct usb_ep;
  *	invalidated by the error may first be dequeued.
  * @context: For use by the completion callback
  * @list: For use by the gadget driver.
+ * @frame_number: Reports the interval number in (micro)frame in which the
+ *	isochronous transfer was transmitted or received.
  * @status: Reports completion code, zero or a negative errno.
  *	Normally, faults block the transfer queue from advancing until
  *	the completion callback returns.
@@ -112,6 +114,8 @@ struct usb_request {
 	void			*context;
 	struct list_head	list;
 
+	unsigned		frame_number;		/* ISO ONLY */
+
 	int			status;
 	unsigned		actual;
 };