Merge tag 'phy-for-4.21_v1' of...

Merge tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.21 *) Change phy set_mode ops to take both mode and setmode as arguments *) Add phy_configure() and phy_validate() API's mostly used for MIPI D-PHY *) Add helpers to get default values of parameters define in MIPI D-PHY spec *) Add driver for TI's CPSW Port PHY Interface Mode selection *) Add driver for Cadence Sierra PHY used with USB and PCIe *) Add driver for Freescale i.MX8MQ USB3 PHY *) Fixes QMP PHY bindings to allow the clocks provided by the PHY to be pointed at in device tree *) Fix for using fully specified regions (in device tree) for configuring the second lane in dual lane PHYs in QMP PHY *) Add support for Allwinner H6 USB2 PHY in phy-sun4i-usb driver *) Update phy-rcar-gen3-usb driver to follow the hardware manual *) Add support for fine grained power management in mapphone-mdm6600 driver Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits) phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers phy: Add MIPI D-PHY configuration options phy: Add configuration interface phy: Add MIPI D-PHY mode phy: add driver for Freescale i.MX8MQ USB3 PHY dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY phy: Use of_node_name_eq for node name comparisons net: ethernet: ti: cpsw: add support for port interface mode selection phy dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy phy: ti: introduce phy-gmii-sel driver dt-bindings: phy: add cpsw port interface mode selection phy bindings phy: mvebu-cp110-comphy: fix spelling in structure name phy: mapphone-mdm6600: Improve phy related runtime PM calls phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure phy: cadence: Add driver for Sierra PHY ...

Merge tag 'phy-for-4.21_v1' of...
Merge tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 4.21 *) Change phy set_mode ops to take both mode and setmode as arguments *) Add phy_configure() and phy_validate() API's mostly used for MIPI D-PHY *) Add helpers to get default values of parameters define in MIPI D-PHY spec *) Add driver for TI's CPSW Port PHY Interface Mode selection *) Add driver for Cadence Sierra PHY used with USB and PCIe *) Add driver for Freescale i.MX8MQ USB3 PHY *) Fixes QMP PHY bindings to allow the clocks provided by the PHY to be pointed at in device tree *) Fix for using fully specified regions (in device tree) for configuring the second lane in dual lane PHYs in QMP PHY *) Add support for Allwinner H6 USB2 PHY in phy-sun4i-usb driver *) Update phy-rcar-gen3-usb driver to follow the hardware manual *) Add support for fine grained power management in mapphone-mdm6600 driver Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits) phy: qcom-qmp: Expose provided clocks to DT dt-bindings: phy-qcom-qmp: Move #clock-cells to child phy: qcom-qmp: Utilize fully-specified DT registers dt-bindings: phy-qcom-qmp: Fix register underspecification phy: ti: fix semicolon.cocci warnings phy: dphy: Add configuration helpers phy: Add MIPI D-PHY configuration options phy: Add configuration interface phy: Add MIPI D-PHY mode phy: add driver for Freescale i.MX8MQ USB3 PHY dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY phy: Use of_node_name_eq for node name comparisons net: ethernet: ti: cpsw: add support for port interface mode selection phy dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy phy: ti: introduce phy-gmii-sel driver dt-bindings: phy: add cpsw port interface mode selection phy bindings phy: mvebu-cp110-comphy: fix spelling in structure name phy: mapphone-mdm6600: Improve phy related runtime PM calls phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure phy: cadence: Add driver for Sierra PHY ...
ed0a773b · Greg Kroah-Hartman · b53bde66 · 2e38c2e7 · ed0a773b · ed0a773b
Commit ed0a773b authored Dec 12, 2018 by Greg Kroah-Hartman
43 changed files
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -22,7 +22,8 @@ Required properties:
 - cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
 			  device. See also cpsw-phy-sel.txt for it's binding.
 			  Note that in legacy cases cpsw-phy-sel may be
-			  a child device instead of a phandle.
+			  a child device instead of a phandle
+			  (DEPRECATED, use phys property instead).

 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
@@ -44,6 +45,7 @@ Optional properties:
 Slave Properties:
 Required properties:
 - phy-mode		: See ethernet.txt file in the same directory
+- phys			: phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt)

 Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
@@ -85,12 +87,14 @@ Examples:
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 1 0>;
 		};
 		cpsw_emac1: slave@1 {
 			phy_id = <&davinci_mdio>, <1>;
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 2 0>;
 		};
 	};

@@ -114,11 +118,13 @@ Examples:
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 1 0>;
 		};
 		cpsw_emac1: slave@1 {
 			phy_id = <&davinci_mdio>, <1>;
 			phy-mode = "rgmii-txid";
 			/* Filled in by U-Boot */
 			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 2 0>;
 		};
 	};
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+* Freescale i.MX8MQ USB3 PHY binding
+
+Required properties:
+- compatible:	Should be "fsl,imx8mq-usb-phy"
+- #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
+- reg:		The base address and length of the registers
+- clocks:	phandles to the clocks for each clock listed in clock-names
+- clock-names:	must contain "phy"
+
+Example:
+	usb3_phy0: phy@381f0040 {
+		compatible = "fsl,imx8mq-usb-phy";
+		reg = <0x381f0040 0x40>;
+		clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+		clock-names = "phy";
+		#phy-cells = <0>;
+	};
--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+Cadence Sierra PHY
+-----------------------
+
+Required properties:
+- compatible:	cdns,sierra-phy-t0
+- clocks:	Must contain an entry in clock-names.
+		See ../clocks/clock-bindings.txt for details.
+- clock-names:	Must be "phy_clk"
+- resets:	Must contain an entry for each in reset-names.
+		See ../reset/reset.txt for details.
+- reset-names:	Must include "sierra_reset" and "sierra_apb".
+		"sierra_reset" must control the reset line to the PHY.
+		"sierra_apb" must control the reset line to the APB PHY
+		interface.
+- reg:		register range for the PHY.
+- #address-cells: Must be 1
+- #size-cells:	Must be 0
+
+Optional properties:
+- cdns,autoconf:	A boolean property whose presence indicates that the
+			PHY registers will be configured by hardware. If not
+			present, all sub-node optional properties must be
+			provided.
+
+Sub-nodes:
+  Each group of PHY lanes with a single master lane should be represented as
+  a sub-node. Note that the actual configuration of each lane is determined by
+  hardware strapping, and must match the configuration specified here.
+
+Sub-node required properties:
+- #phy-cells:	Generic PHY binding; must be 0.
+- reg:		The master lane number.  This is the lowest numbered lane
+		in the lane group.
+- resets:	Must contain one entry which controls the reset line for the
+		master lane of the sub-node.
+		See ../reset/reset.txt for details.
+
+Sub-node optional properties:
+- cdns,num-lanes:	Number of lanes in this group.  From 1 to 4.  The
+			group is made up of consecutive lanes.
+- cdns,phy-type:	Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
+			configuration of lanes.
+
+Example:
+	pcie_phy4: pcie-phy@fd240000 {
+		compatible = "cdns,sierra-phy-t0";
+		reg = <0x0 0xfd240000 0x0 0x40000>;
+		resets = <&phyrst 0>, <&phyrst 1>;
+		reset-names = "sierra_reset", "sierra_apb";
+		clocks = <&phyclock>;
+		clock-names = "phy_clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pcie0_phy0: pcie-phy@0 {
+				reg = <0>;
+				resets = <&phyrst 2>;
+				cdns,num-lanes = <2>;
+				#phy-cells = <0>;
+				cdns,phy-type = <PHY_TYPE_PCIE>;
+		};
+		pcie0_phy1: pcie-phy@2 {
+				reg = <2>;
+				resets = <&phyrst 4>;
+				cdns,num-lanes = <1>;
+				#phy-cells = <0>;
+				cdns,phy-type = <PHY_TYPE_PCIE>;
+		};
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -25,10 +25,6 @@ Required properties:
  - For all others:
    - The reg-names property shouldn't be defined.

- - #clock-cells: must be 1
-    - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe
-      interface (for pipe based PHYs). These clock are then gate-controlled
-      by gcc.
 - #address-cells: must be 1
 - #size-cells: must be 1
 - ranges: must be present
@@ -82,27 +78,33 @@ Required nodes:
 - Each device node of QMP phy is required to have as many child nodes as
   the number of lanes the PHY has.

-Required properties for child node:
+Required properties for child nodes of PCIe PHYs (one child per lane):
 - reg: list of offset and length pairs of register sets for PHY blocks -
-	- index 0: tx
-	- index 1: rx
-	- index 2: pcs
-	- index 3: pcs_misc (optional)
+	tx, rx, pcs, and pcs_misc (optional).
+ - #phy-cells: must be 0

+Required properties for a single "lanes" child node of non-PCIe PHYs:
+ - reg: list of offset and length pairs of register sets for PHY blocks
+	For 1-lane devices:
+		tx, rx, pcs, and (optionally) pcs_misc
+	For 2-lane devices:
+		tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc
 - #phy-cells: must be 0

-Required properties child node of pcie and usb3 qmp phys:
+Required properties for child node of PCIe and USB3 qmp phys:
 - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
 - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
 - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
-
 	For "qcom,ipq8074-qmp-pcie-phy":
 		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
 			(or)
 		  "pcie20_phy1_pipe_clk"
+ - #clock-cells: must be 0
+    - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
+      gate-controlled by the gcc.

 Required properties for child node of PHYs with lane reset, AKA:
 	"qcom,msm8996-qmp-pcie-phy"
@@ -115,7 +117,6 @@ Example:
 	phy@34000 {
 		compatible = "qcom,msm8996-qmp-pcie-phy";
 		reg = <0x34000 0x488>;
-		#clock-cells = <1>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -137,6 +138,7 @@ Example:
 			reg = <0x35000 0x130>,
 				<0x35200 0x200>,
 				<0x35400 0x1dc>;
+			#clock-cells = <0>;
 			#phy-cells = <0>;

 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
@@ -150,3 +152,54 @@ Example:
 		...
 		...
 	};
+
+	phy@88eb000 {
+		compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+		reg = <0x88eb000 0x18c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+			 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+			 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+		clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+		resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+			 <&gcc GCC_USB3_PHY_SEC_BCR>;
+		reset-names = "phy", "common";
+
+		lane@88eb200 {
+			reg = <0x88eb200 0x128>,
+			      <0x88eb400 0x1fc>,
+			      <0x88eb800 0x218>,
+			      <0x88eb600 0x70>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "pipe0";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+		};
+	};
+
+	phy@1d87000 {
+		compatible = "qcom,sdm845-qmp-ufs-phy";
+		reg = <0x1d87000 0x18c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-names = "ref",
+			      "ref_aux";
+		clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+			 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+		lanes@1d87400 {
+			reg = <0x1d87400 0x108>,
+			      <0x1d87600 0x1e0>,
+			      <0x1d87c00 0x1dc>,
+			      <0x1d87800 0x108>,
+			      <0x1d87a00 0x1e0>;
+			#phy-cells = <0>;
+		};
+	};
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -14,13 +14,14 @@ Required properties:
  * allwinner,sun8i-r40-usb-phy
  * allwinner,sun8i-v3s-usb-phy
  * allwinner,sun50i-a64-usb-phy
+  * allwinner,sun50i-h6-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :
  * "phy_ctrl"
-  * "pmu0" for H3, V3s and A64
+  * "pmu0" for H3, V3s, A64 or H6
  * "pmu1"
  * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
-  * "pmu3" for sun8i-h3
+  * "pmu3" for sun8i-h3 or sun50i-h6
 - #phy-cells : from the generic phy bindings, must be 1
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names :
@@ -29,12 +30,13 @@ Required properties:
  * "usb0_phy", "usb1_phy" for sun8i
  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t
  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3
+  * "usb0_phy" and "usb3_phy" for sun50i-h6
 - resets : a list of phandle + reset specifier pairs
 - reset-names :
  * "usb0_reset"
  * "usb1_reset"
  * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
-  * "usb3_reset" for sun8i-h3
+  * "usb3_reset" for sun8i-h3 and sun50i-h6

 Optional properties:
 - usb0_id_det-gpios : gpio phandle for reading the otg id pin value

--- a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt
+CPSW Port's Interface Mode Selection PHY Tree Bindings
+-----------------------------------------------
+
+TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
+two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
+The interface mode is selected by configuring the MII mode selection register(s)
+(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
+bit fields placement in SCM are different between SoCs while fields meaning
+is the same.
+                                               +--------------+
+        +-------------------------------+      |SCM           |
+        |                     CPSW      |      |  +---------+ |
+        |        +--------------------------------+gmii_sel | |
+        |        |                      |      |  +---------+ |
+        |   +----v---+     +--------+   |      +--------------+
+        |   |Port 1..<--+-->GMII/MII<------->
+        |   |        |  |  |        |   |
+        |   +--------+  |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RMII   <------->
+        |               +-->        |   |
+        |               |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RGMII  <------->
+        |               +-->        |   |
+        |                  +--------+   |
+        +-------------------------------+
+
+CPSW Port's Interface Mode Selection PHY describes MII interface mode between
+CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
+
+CPSW Port's Interface Mode Selection PHY device should defined as child device
+of SCM node (scm_conf) and can be attached to each CPSW port node using standard
+PHY bindings (See phy/phy-bindings.txt).
+
+Required properties:
+- compatible		: Should be "ti,am3352-phy-gmii-sel" for am335x platform
+			  "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform
+			  "ti,am43xx-phy-gmii-sel" for am43xx platform
+			  "ti,dm814-phy-gmii-sel" for dm814x platform
+- reg			: Address and length of the register set for the device
+- #phy-cells		: must be 2.
+			  cell 1 - CPSW port number (starting from 1)
+			  cell 2 - RMII refclk mode
+
+Examples:
+	phy_gmii_sel: phy-gmii-sel {
+		compatible = "ti,am3352-phy-gmii-sel";
+		reg = <0x650 0x4>;
+		#phy-cells = <2>;
+	};
+
+	mac: ethernet@4a100000 {
+		compatible = "ti,am335x-cpsw","ti,cpsw";
+		...
+
+		cpsw_emac0: slave@4a100200 {
+			...
+			phys = <&phy_gmii_sel 1 1>;
+		};
+
+		cpsw_emac1: slave@4a100300 {
+			...
+			phys = <&phy_gmii_sel 2 1>;
+		};
+	};
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6261,6 +6261,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
 S:	Supported
 F:	drivers/phy/
 F:	include/linux/phy/
+F:	Documentation/devicetree/bindings/phy/

 GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1165,28 +1165,13 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port)
 */
 static int mvpp22_comphy_init(struct mvpp2_port *port)
 {
-	enum phy_mode mode;
 	int ret;

 	if (!port->comphy)
 		return 0;

-	switch (port->phy_interface) {
-	case PHY_INTERFACE_MODE_SGMII:
-	case PHY_INTERFACE_MODE_1000BASEX:
-		mode = PHY_MODE_SGMII;
-		break;
-	case PHY_INTERFACE_MODE_2500BASEX:
-		mode = PHY_MODE_2500SGMII;
-		break;
-	case PHY_INTERFACE_MODE_10GKR:
-		mode = PHY_MODE_10GKR;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = phy_set_mode(port->comphy, mode);
+	ret = phy_set_mode_ext(port->comphy, PHY_MODE_ETHERNET,
+			       port->phy_interface);
 	if (ret)
 		return ret;


--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -472,7 +472,6 @@ static int ocelot_port_open(struct net_device *dev)
 {
 	struct ocelot_port *port = netdev_priv(dev);
 	struct ocelot *ocelot = port->ocelot;
-	enum phy_mode phy_mode;
 	int err;

 	/* Enable receiving frames on the port, and activate auto-learning of
@@ -484,12 +483,8 @@ static int ocelot_port_open(struct net_device *dev)
 			 ANA_PORT_PORT_CFG, port->chip_port);

 	if (port->serdes) {
-		if (port->phy_mode == PHY_INTERFACE_MODE_SGMII)
-			phy_mode = PHY_MODE_SGMII;
-		else
-			phy_mode = PHY_MODE_QSGMII;
-
-		err = phy_set_mode(port->serdes, phy_mode);
+		err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET,
+				       port->phy_mode);
 		if (err) {
 			netdev_err(dev, "Could not set mode of SerDes\n");
 			return err;

--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -26,6 +26,7 @@
 #include <linux/netdevice.h>
 #include <linux/net_tstamp.h>
 #include <linux/phy.h>
+#include <linux/phy/phy.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
@@ -387,6 +388,7 @@ struct cpsw_slave_data {
 	int		phy_if;
 	u8		mac_addr[ETH_ALEN];
 	u16		dual_emac_res_vlan;	/* Reserved VLAN for DualEMAC */
+	struct phy	*ifphy;
 };

 struct cpsw_platform_data {
@@ -1510,7 +1512,12 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 	phy_start(slave->phy);

 	/* Configure GMII_SEL register */
-	cpsw_phy_sel(cpsw->dev, slave->phy->interface, slave->slave_num);
+	if (!IS_ERR(slave->data->ifphy))
+		phy_set_mode_ext(slave->data->ifphy, PHY_MODE_ETHERNET,
+				 slave->data->phy_if);
+	else
+		cpsw_phy_sel(cpsw->dev, slave->phy->interface,
+			     slave->slave_num);
 }

 static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)
@@ -3147,6 +3154,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 		if (strcmp(slave_node->name, "slave"))
 			continue;

+		slave_data->ifphy = devm_of_phy_get(&pdev->dev, slave_node,
+						    NULL);
+		if (!IS_ENABLED(CONFIG_TI_CPSW_PHY_SEL) &&
+		    IS_ERR(slave_data->ifphy)) {
+			ret = PTR_ERR(slave_data->ifphy);
+			dev_err(&pdev->dev,
+				"%d: Error retrieving port phy: %d\n", i, ret);
+			return ret;
+		}
+
 		slave_data->phy_node = of_parse_phandle(slave_node,
 							"phy-handle", 0);
 		parp = of_get_property(slave_node, "phy_id", &lenp);

--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,6 +15,14 @@ config GENERIC_PHY
 	  phy users can obtain reference to the PHY. All the users of this
 	  framework should select this config.

+config GENERIC_PHY_MIPI_DPHY
+	bool
+	help
+	  Generic MIPI D-PHY support.
+
+	  Provides a number of helpers a core functions for MIPI D-PHY
+	  drivers to us.
+
 config PHY_LPC18XX_USB_OTG
 	tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
 	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -44,6 +52,7 @@ source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
+source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
 source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"

--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,6 +4,7 @@
 #

 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY)	+= phy-core-mipi-dphy.o
 obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
@@ -16,6 +17,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
 obj-y					+= broadcom/	\
 					   cadence/	\
+					   freescale/	\
 					   hisilicon/	\
 					   marvell/	\
 					   motorola/	\

--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -115,6 +115,7 @@ enum sun4i_usb_phy_type {
 	sun8i_r40_phy,
 	sun8i_v3s_phy,
 	sun50i_a64_phy,
+	sun50i_h6_phy,
 };

 struct sun4i_usb_phy_cfg {
@@ -126,6 +127,7 @@ struct sun4i_usb_phy_cfg {
 	bool dedicated_clocks;
 	bool enable_pmu_unk1;
 	bool phy0_dual_route;
+	int missing_phys;
 };

 struct sun4i_usb_phy_data {
@@ -294,7 +296,8 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 		return ret;
 	}

-	if (data->cfg->type == sun8i_a83t_phy) {
+	if (data->cfg->type == sun8i_a83t_phy ||
+	    data->cfg->type == sun50i_h6_phy) {
 		if (phy->index == 0) {
 			val = readl(data->base + data->cfg->phyctl_offset);
 			val |= PHY_CTL_VBUSVLDEXT;
@@ -343,7 +346,8 @@ static int sun4i_usb_phy_exit(struct phy *_phy)
 	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);

 	if (phy->index == 0) {
-		if (data->cfg->type == sun8i_a83t_phy) {
+		if (data->cfg->type == sun8i_a83t_phy ||
+		    data->cfg->type == sun50i_h6_phy) {
 			void __iomem *phyctl = data->base +
 				data->cfg->phyctl_offset;

@@ -474,7 +478,8 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
 	return 0;
 }

-static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
+static int sun4i_usb_phy_set_mode(struct phy *_phy,
+				  enum phy_mode mode, int submode)
 {
 	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
 	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
@@ -646,6 +651,9 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
 	if (args->args[0] >= data->cfg->num_phys)
 		return ERR_PTR(-ENODEV);

+	if (data->cfg->missing_phys & BIT(args->args[0]))
+		return ERR_PTR(-ENODEV);
+
 	return data->phys[args->args[0]].phy;
 }

@@ -741,6 +749,9 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 		struct sun4i_usb_phy *phy = data->phys + i;
 		char name[16];

+		if (data->cfg->missing_phys & BIT(i))
+			continue;
+
 		snprintf(name, sizeof(name), "usb%d_vbus", i);
 		phy->vbus = devm_regulator_get_optional(dev, name);
 		if (IS_ERR(phy->vbus)) {
@@ -952,6 +963,17 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
 	.phy0_dual_route = true,
 };

+static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
+	.num_phys = 4,
+	.type = sun50i_h6_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
+	.phy0_dual_route = true,
+	.missing_phys = BIT(1) | BIT(2),
+};
+
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -965,6 +987,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
+	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);

--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -152,7 +152,8 @@ static int phy_meson_gxl_usb2_reset(struct phy *phy)
 	return 0;
 }

-static int phy_meson_gxl_usb2_set_mode(struct phy *phy, enum phy_mode mode)
+static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
+				       enum phy_mode mode, int submode)
 {
 	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);

@@ -209,7 +210,7 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy)
 	/* power on the PHY by taking it out of reset mode */
 	regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);

-	ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode);
+	ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0);
 	if (ret) {
 		phy_meson_gxl_usb2_power_off(phy);


--- a/drivers/phy/amlogic/phy-meson-gxl-usb3.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb3.c
@@ -119,7 +119,8 @@ static int phy_meson_gxl_usb3_power_off(struct phy *phy)
 	return 0;
 }

-static int phy_meson_gxl_usb3_set_mode(struct phy *phy, enum phy_mode mode)
+static int phy_meson_gxl_usb3_set_mode(struct phy *phy,
+				       enum phy_mode mode, int submode)
 {
 	struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);

@@ -164,7 +165,7 @@ static int phy_meson_gxl_usb3_init(struct phy *phy)
 	if (ret)
 		goto err_disable_clk_phy;

-	ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode);
+	ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode, 0);
 	if (ret)
 		goto err_disable_clk_peripheral;


--- a/drivers/phy/cadence/Kconfig
+++ b/drivers/phy/cadence/Kconfig
 #
-# Phy driver for Cadence MHDP DisplayPort controller
+# Phy drivers for Cadence PHYs
 #
 config PHY_CADENCE_DP
 	tristate "Cadence MHDP DisplayPort PHY driver"
@@ -8,3 +8,10 @@ config PHY_CADENCE_DP
 	select GENERIC_PHY
 	help
 	  Support for Cadence MHDP DisplayPort PHY.
+
+config PHY_CADENCE_SIERRA
+	tristate "Cadence Sierra PHY Driver"
+	depends on OF && HAS_IOMEM && RESET_CONTROLLER
+	select GENERIC_PHY
+	help
+	  Enable this to support the Cadence Sierra PHY driver
\ No newline at end of file
--- a/drivers/phy/cadence/Makefile
+++ b/drivers/phy/cadence/Makefile
 obj-$(CONFIG_PHY_CADENCE_DP)	+= phy-cadence-dp.o
+obj-$(CONFIG_PHY_CADENCE_SIERRA)	+= phy-cadence-sierra.o
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
+config PHY_FSL_IMX8MQ_USB
+	tristate "Freescale i.MX8M USB3 PHY"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	default SOC_IMX8MQ
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
+obj-$(CONFIG_PHY_FSL_IMX8MQ_USB)	+= phy-fsl-imx8mq-usb.o
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2017 NXP. */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PHY_CTRL0			0x0
+#define PHY_CTRL0_REF_SSP_EN		BIT(2)
+
+#define PHY_CTRL1			0x4
+#define PHY_CTRL1_RESET			BIT(0)
+#define PHY_CTRL1_COMMONONN		BIT(1)
+#define PHY_CTRL1_ATERESET		BIT(3)
+#define PHY_CTRL1_VDATSRCENB0		BIT(19)
+#define PHY_CTRL1_VDATDETENB0		BIT(20)
+
+#define PHY_CTRL2			0x8
+#define PHY_CTRL2_TXENABLEN0		BIT(8)
+
+struct imx8mq_usb_phy {
+	struct phy *phy;
+	struct clk *clk;
+	void __iomem *base;
+};
+
+static int imx8mq_usb_phy_init(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	u32 value;
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 |
+		   PHY_CTRL1_COMMONONN);
+	value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value |= PHY_CTRL0_REF_SSP_EN;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	value = readl(imx_phy->base + PHY_CTRL2);
+	value |= PHY_CTRL2_TXENABLEN0;
+	writel(value, imx_phy->base + PHY_CTRL2);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	return 0;
+}
+
+static int imx8mq_phy_power_on(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+
+	return clk_prepare_enable(imx_phy->clk);
+}
+
+static int imx8mq_phy_power_off(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(imx_phy->clk);
+
+	return 0;
+}
+
+static struct phy_ops imx8mq_usb_phy_ops = {
+	.init		= imx8mq_usb_phy_init,
+	.power_on	= imx8mq_phy_power_on,
+	.power_off	= imx8mq_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int imx8mq_usb_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct imx8mq_usb_phy *imx_phy;
+	struct resource *res;
+
+	imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
+	if (!imx_phy)
+		return -ENOMEM;
+
+	imx_phy->clk = devm_clk_get(dev, "phy");
+	if (IS_ERR(imx_phy->clk)) {
+		dev_err(dev, "failed to get imx8mq usb phy clock\n");
+		return PTR_ERR(imx_phy->clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	imx_phy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(imx_phy->base))
+		return PTR_ERR(imx_phy->base);
+
+	imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops);
+	if (IS_ERR(imx_phy->phy))
+		return PTR_ERR(imx_phy->phy);
+
+	phy_set_drvdata(imx_phy->phy, imx_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id imx8mq_usb_phy_of_match[] = {
+	{.compatible = "fsl,imx8mq-usb-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
+
+static struct platform_driver imx8mq_usb_phy_driver = {
+	.probe	= imx8mq_usb_phy_probe,
+	.driver = {
+		.name	= "imx8mq-usb-phy",
+		.of_match_table	= imx8mq_usb_phy_of_match,
+	}
+};
+module_platform_driver(imx8mq_usb_phy_driver);
+
+MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver");
+MODULE_LICENSE("GPL");
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -9,6 +9,7 @@
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/phy.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -114,43 +115,45 @@
 #define MVEBU_COMPHY_LANES	6
 #define MVEBU_COMPHY_PORTS	3

-struct mvebu_comhy_conf {
+struct mvebu_comphy_conf {
 	enum phy_mode mode;
+	int submode;
 	unsigned lane;
 	unsigned port;
 	u32 mux;
 };

-#define MVEBU_COMPHY_CONF(_lane, _port, _mode, _mux)	\
+#define MVEBU_COMPHY_CONF(_lane, _port, _submode, _mux)	\
 	{						\
 		.lane = _lane,				\
 		.port = _port,				\
-		.mode = _mode,				\
+		.mode = PHY_MODE_ETHERNET,		\
+		.submode = _submode,			\
 		.mux = _mux,				\
 	}

-static const struct mvebu_comhy_conf mvebu_comphy_cp110_modes[] = {
+static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	/* lane 0 */
-	MVEBU_COMPHY_CONF(0, 1, PHY_MODE_SGMII, 0x1),
-	MVEBU_COMPHY_CONF(0, 1, PHY_MODE_2500SGMII, 0x1),
+	MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1),
 	/* lane 1 */
-	MVEBU_COMPHY_CONF(1, 2, PHY_MODE_SGMII, 0x1),
-	MVEBU_COMPHY_CONF(1, 2, PHY_MODE_2500SGMII, 0x1),
+	MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
 	/* lane 2 */
-	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_SGMII, 0x1),
-	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_2500SGMII, 0x1),
-	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_10GKR, 0x1),
+	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1),
+	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1),
 	/* lane 3 */
-	MVEBU_COMPHY_CONF(3, 1, PHY_MODE_SGMII, 0x2),
-	MVEBU_COMPHY_CONF(3, 1, PHY_MODE_2500SGMII, 0x2),
+	MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2),
+	MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2),
 	/* lane 4 */
-	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_SGMII, 0x2),
-	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_2500SGMII, 0x2),
-	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_10GKR, 0x2),
-	MVEBU_COMPHY_CONF(4, 1, PHY_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2),
+	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2),
+	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2),
+	MVEBU_COMPHY_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
 	/* lane 5 */
-	MVEBU_COMPHY_CONF(5, 2, PHY_MODE_SGMII, 0x1),
-	MVEBU_COMPHY_CONF(5, 2, PHY_MODE_2500SGMII, 0x1),
+	MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
+	MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
 };

 struct mvebu_comphy_priv {
@@ -163,10 +166,12 @@ struct mvebu_comphy_lane {
 	struct mvebu_comphy_priv *priv;
 	unsigned id;
 	enum phy_mode mode;
+	int submode;
 	int port;
 };

-static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
+static int mvebu_comphy_get_mux(int lane, int port,
+				enum phy_mode mode, int submode)
 {
 	int i, n = ARRAY_SIZE(mvebu_comphy_cp110_modes);

@@ -177,7 +182,8 @@ static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
 	for (i = 0; i < n; i++) {
 		if (mvebu_comphy_cp110_modes[i].lane == lane &&
 		    mvebu_comphy_cp110_modes[i].port == port &&
-		    mvebu_comphy_cp110_modes[i].mode == mode)
+		    mvebu_comphy_cp110_modes[i].mode == mode &&
+		    mvebu_comphy_cp110_modes[i].submode == submode)
 			break;
 	}

@@ -187,8 +193,7 @@ static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
 	return mvebu_comphy_cp110_modes[i].mux;
 }

-static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
-					     enum phy_mode mode)
+static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
 {
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;
@@ -206,14 +211,14 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
 		 MVEBU_COMPHY_SERDES_CFG0_HALF_BUS |
 		 MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xf) |
 		 MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xf));
-	if (mode == PHY_MODE_10GKR)
+	if (lane->submode == PHY_INTERFACE_MODE_10GKR)
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe);
-	else if (mode == PHY_MODE_2500SGMII)
+	else if (lane->submode == PHY_INTERFACE_MODE_2500BASEX)
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x8) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x8) |
 		       MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
-	else if (mode == PHY_MODE_SGMII)
+	else if (lane->submode == PHY_INTERFACE_MODE_SGMII)
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x6) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x6) |
 		       MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
@@ -243,7 +248,7 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
 	/* refclk selection */
 	val = readl(priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));
 	val &= ~MVEBU_COMPHY_MISC_CTRL0_REFCLK_SEL;
-	if (mode == PHY_MODE_10GKR)
+	if (lane->submode == PHY_INTERFACE_MODE_10GKR)
 		val |= MVEBU_COMPHY_MISC_CTRL0_ICP_FORCE;
 	writel(val, priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));

@@ -261,8 +266,7 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
 	writel(val, priv->base + MVEBU_COMPHY_LOOPBACK(lane->id));
 }

-static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane,
-				  enum phy_mode mode)
+static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane)
 {
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;
@@ -303,13 +307,13 @@ static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane,
 	return 0;
 }

-static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode)
+static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
 {
 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;

-	mvebu_comphy_ethernet_init_reset(lane, mode);
+	mvebu_comphy_ethernet_init_reset(lane);

 	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 	val &= ~MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
@@ -330,7 +334,7 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode)
 	val |= MVEBU_COMPHY_GEN1_S0_TX_EMPH(0x1);
 	writel(val, priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));

-	return mvebu_comphy_init_plls(lane, PHY_MODE_SGMII);
+	return mvebu_comphy_init_plls(lane);
 }

 static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
@@ -339,7 +343,7 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
 	struct mvebu_comphy_priv *priv = lane->priv;
 	u32 val;

-	mvebu_comphy_ethernet_init_reset(lane, PHY_MODE_10GKR);
+	mvebu_comphy_ethernet_init_reset(lane);

 	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 	val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL |
@@ -469,7 +473,7 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
 	val |= MVEBU_COMPHY_EXT_SELV_RX_SAMPL(0x1a);
 	writel(val, priv->base + MVEBU_COMPHY_EXT_SELV(lane->id));

-	return mvebu_comphy_init_plls(lane, PHY_MODE_10GKR);
+	return mvebu_comphy_init_plls(lane);
 }

 static int mvebu_comphy_power_on(struct phy *phy)
@@ -479,7 +483,8 @@ static int mvebu_comphy_power_on(struct phy *phy)
 	int ret, mux;
 	u32 val;

-	mux = mvebu_comphy_get_mux(lane->id, lane->port, lane->mode);
+	mux = mvebu_comphy_get_mux(lane->id, lane->port,
+				   lane->mode, lane->submode);
 	if (mux < 0)
 		return -ENOTSUPP;

@@ -492,12 +497,12 @@ static int mvebu_comphy_power_on(struct phy *phy)
 	val |= mux << MVEBU_COMPHY_SELECTOR_PHY(lane->id);
 	regmap_write(priv->regmap, MVEBU_COMPHY_SELECTOR, val);

-	switch (lane->mode) {
-	case PHY_MODE_SGMII:
-	case PHY_MODE_2500SGMII:
-		ret = mvebu_comphy_set_mode_sgmii(phy, lane->mode);
+	switch (lane->submode) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_2500BASEX:
+		ret = mvebu_comphy_set_mode_sgmii(phy);
 		break;
-	case PHY_MODE_10GKR:
+	case PHY_INTERFACE_MODE_10GKR:
 		ret = mvebu_comphy_set_mode_10gkr(phy);
 		break;
 	default:
@@ -512,14 +517,22 @@ static int mvebu_comphy_power_on(struct phy *phy)
 	return ret;
 }

-static int mvebu_comphy_set_mode(struct phy *phy, enum phy_mode mode)
+static int mvebu_comphy_set_mode(struct phy *phy,
+				 enum phy_mode mode, int submode)
 {
 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);

-	if (mvebu_comphy_get_mux(lane->id, lane->port, mode) < 0)
+	if (mode != PHY_MODE_ETHERNET)
+		return -EINVAL;
+
+	if (submode == PHY_INTERFACE_MODE_1000BASEX)
+		submode = PHY_INTERFACE_MODE_SGMII;
+
+	if (mvebu_comphy_get_mux(lane->id, lane->port, mode, submode) < 0)
 		return -EINVAL;

 	lane->mode = mode;
+	lane->submode = submode;
 	return 0;
 }


--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -971,7 +971,7 @@ static int mtk_phy_exit(struct phy *phy)
 	return 0;
 }

-static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 {
 	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
 	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);

--- a/drivers/phy/mediatek/phy-mtk-xsphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xsphy.c
@@ -426,7 +426,7 @@ static int mtk_phy_exit(struct phy *phy)
 	return 0;
 }

-static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 {
 	struct xsphy_instance *inst = phy_get_drvdata(phy);
 	struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent);

--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -16,6 +16,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
+#include <linux/pinctrl/consumer.h>

 #define PHY_MDM6600_PHY_DELAY_MS	4000	/* PHY enable 2.2s to 3.5s */
 #define PHY_MDM6600_ENABLED_DELAY_MS	8000	/* 8s more total for MDM6600 */
@@ -120,12 +121,22 @@ static int phy_mdm6600_power_on(struct phy *x)
 {
 	struct phy_mdm6600 *ddata = phy_get_drvdata(x);
 	struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+	int error;

 	if (!ddata->enabled)
 		return -ENODEV;

+	error = pinctrl_pm_select_default_state(ddata->dev);
+	if (error)
+		dev_warn(ddata->dev, "%s: error with default_state: %i\n",
+			 __func__, error);
+
 	gpiod_set_value_cansleep(enable_gpio, 1);

+	/* Allow aggressive PM for USB, it's only needed for n_gsm port */
+	if (pm_runtime_enabled(&x->dev))
+		phy_pm_runtime_put(x);
+
 	return 0;
 }

@@ -133,12 +144,26 @@ static int phy_mdm6600_power_off(struct phy *x)
 {
 	struct phy_mdm6600 *ddata = phy_get_drvdata(x);
 	struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+	int error;

 	if (!ddata->enabled)
 		return -ENODEV;

+	/* Paired with phy_pm_runtime_put() in phy_mdm6600_power_on() */
+	if (pm_runtime_enabled(&x->dev)) {
+		error = phy_pm_runtime_get(x);
+		if (error < 0 && error != -EINPROGRESS)
+			dev_warn(ddata->dev, "%s: phy_pm_runtime_get: %i\n",
+				 __func__, error);
+	}
+
 	gpiod_set_value_cansleep(enable_gpio, 0);

+	error = pinctrl_pm_select_sleep_state(ddata->dev);
+	if (error)
+		dev_warn(ddata->dev, "%s: error with sleep_state: %i\n",
+			 __func__, error);
+
 	return 0;
 }

@@ -529,28 +554,17 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
 	ddata->dev = &pdev->dev;
 	platform_set_drvdata(pdev, ddata);

+	/* Active state selected in phy_mdm6600_power_on() */
+	error = pinctrl_pm_select_sleep_state(ddata->dev);
+	if (error)
+		dev_warn(ddata->dev, "%s: error with sleep_state: %i\n",
+			 __func__, error);
+
 	error = phy_mdm6600_init_lines(ddata);
 	if (error)
 		return error;

 	phy_mdm6600_init_irq(ddata);
-
-	ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops);
-	if (IS_ERR(ddata->generic_phy)) {
-		error = PTR_ERR(ddata->generic_phy);
-		goto cleanup;
-	}
-
-	phy_set_drvdata(ddata->generic_phy, ddata);
-
-	ddata->phy_provider =
-		devm_of_phy_provider_register(ddata->dev,
-					      of_phy_simple_xlate);
-	if (IS_ERR(ddata->phy_provider)) {
-		error = PTR_ERR(ddata->phy_provider);
-		goto cleanup;
-	}
-
 	schedule_delayed_work(&ddata->bootup_work, 0);

 	/*
@@ -574,14 +588,31 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
 	if (error < 0) {
 		dev_warn(ddata->dev, "failed to wake modem: %i\n", error);
 		pm_runtime_put_noidle(ddata->dev);
+		goto cleanup;
 	}
+
+	ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops);
+	if (IS_ERR(ddata->generic_phy)) {
+		error = PTR_ERR(ddata->generic_phy);
+		goto idle;
+	}
+
+	phy_set_drvdata(ddata->generic_phy, ddata);
+
+	ddata->phy_provider =
+		devm_of_phy_provider_register(ddata->dev,
+					      of_phy_simple_xlate);
+	if (IS_ERR(ddata->phy_provider))
+		error = PTR_ERR(ddata->phy_provider);
+
+idle:
 	pm_runtime_mark_last_busy(ddata->dev);
 	pm_runtime_put_autosuspend(ddata->dev);

-	return 0;
-
 cleanup:
-	phy_mdm6600_device_power_off(ddata);
+	if (error < 0)
+		phy_mdm6600_device_power_off(ddata);
+
 	return error;
 }


--- a/drivers/phy/mscc/phy-ocelot-serdes.c
+++ b/drivers/phy/mscc/phy-ocelot-serdes.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/phy.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -104,20 +105,24 @@ struct serdes_mux {
 	u8			idx;
 	u8			port;
 	enum phy_mode		mode;
+	int			submode;
 	u32			mask;
 	u32			mux;
 };

-#define SERDES_MUX(_idx, _port, _mode, _mask, _mux) {		\
+#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) {		\
 	.idx = _idx,						\
 	.port = _port,						\
 	.mode = _mode,						\
+	.submode = _submode,					\
 	.mask = _mask,						\
 	.mux = _mux,						\
 }

-#define SERDES_MUX_SGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_SGMII, m, c)
-#define SERDES_MUX_QSGMII(i, p, m, c) SERDES_MUX(i, p, PHY_MODE_QSGMII, m, c)
+#define SERDES_MUX_SGMII(i, p, m, c) \
+	SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_SGMII, m, c)
+#define SERDES_MUX_QSGMII(i, p, m, c) \
+	SERDES_MUX(i, p, PHY_MODE_ETHERNET, PHY_INTERFACE_MODE_QSGMII, m, c)

 static const struct serdes_mux ocelot_serdes_muxes[] = {
 	SERDES_MUX_SGMII(SERDES1G(0), 0, 0, 0),
@@ -154,22 +159,27 @@ static const struct serdes_mux ocelot_serdes_muxes[] = {
 	SERDES_MUX_SGMII(SERDES6G(1), 8, 0, 0),
 	SERDES_MUX_SGMII(SERDES6G(2), 10, HSIO_HW_CFG_PCIE_ENA |
 			 HSIO_HW_CFG_DEV2G5_10_MODE, 0),
-	SERDES_MUX(SERDES6G(2), 10, PHY_MODE_PCIE, HSIO_HW_CFG_PCIE_ENA,
+	SERDES_MUX(SERDES6G(2), 10, PHY_MODE_PCIE, 0, HSIO_HW_CFG_PCIE_ENA,
 		   HSIO_HW_CFG_PCIE_ENA),
 };

-static int serdes_set_mode(struct phy *phy, enum phy_mode mode)
+static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 {
 	struct serdes_macro *macro = phy_get_drvdata(phy);
 	unsigned int i;
 	int ret;

+	/* As of now only PHY_MODE_ETHERNET is supported */
+	if (mode != PHY_MODE_ETHERNET)
+		return -EOPNOTSUPP;
+
 	for (i = 0; i < ARRAY_SIZE(ocelot_serdes_muxes); i++) {
 		if (macro->idx != ocelot_serdes_muxes[i].idx ||
-		    mode != ocelot_serdes_muxes[i].mode)
+		    mode != ocelot_serdes_muxes[i].mode ||
+		    submode != ocelot_serdes_muxes[i].submode)
 			continue;

-		if (mode != PHY_MODE_QSGMII &&
+		if (submode != PHY_INTERFACE_MODE_QSGMII &&
 		    macro->port != ocelot_serdes_muxes[i].port)
 			continue;


--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 NVIDIA Corporation
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ */
+
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/time64.h>
+
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+#define PSEC_PER_SEC	1000000000000LL
+
+/*
+ * Minimum D-PHY timings based on MIPI D-PHY specification. Derived
+ * from the valid ranges specified in Section 6.9, Table 14, Page 41
+ * of the D-PHY specification (v2.1).
+ */
+int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
+				     unsigned int bpp,
+				     unsigned int lanes,
+				     struct phy_configure_opts_mipi_dphy *cfg)
+{
+	unsigned long long hs_clk_rate;
+	unsigned long long ui;
+
+	if (!cfg)
+		return -EINVAL;
+
+	hs_clk_rate = pixel_clock * bpp;
+	do_div(hs_clk_rate, lanes);
+
+	ui = ALIGN(PSEC_PER_SEC, hs_clk_rate);
+	do_div(ui, hs_clk_rate);
+
+	cfg->clk_miss = 0;
+	cfg->clk_post = 60000 + 52 * ui;
+	cfg->clk_pre = 8000;
+	cfg->clk_prepare = 38000;
+	cfg->clk_settle = 95000;
+	cfg->clk_term_en = 0;
+	cfg->clk_trail = 60000;
+	cfg->clk_zero = 262000;
+	cfg->d_term_en = 0;
+	cfg->eot = 0;
+	cfg->hs_exit = 100000;
+	cfg->hs_prepare = 40000 + 4 * ui;
+	cfg->hs_zero = 105000 + 6 * ui;
+	cfg->hs_settle = 85000 + 6 * ui;
+	cfg->hs_skip = 40000;
+
+	/*
+	 * The MIPI D-PHY specification (Section 6.9, v1.2, Table 14, Page 40)
+	 * contains this formula as:
+	 *
+	 *     T_HS-TRAIL = max(n * 8 * ui, 60 + n * 4 * ui)
+	 *
+	 * where n = 1 for forward-direction HS mode and n = 4 for reverse-
+	 * direction HS mode. There's only one setting and this function does
+	 * not parameterize on anything other that ui, so this code will
+	 * assumes that reverse-direction HS mode is supported and uses n = 4.
+	 */
+	cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui);
+
+	cfg->init = 100000000;
+	cfg->lpx = 60000;
+	cfg->ta_get = 5 * cfg->lpx;
+	cfg->ta_go = 4 * cfg->lpx;
+	cfg->ta_sure = 2 * cfg->lpx;
+	cfg->wakeup = 1000000000;
+
+	cfg->hs_clk_rate = hs_clk_rate;
+	cfg->lanes = lanes;
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_mipi_dphy_get_default_config);
+
+/*
+ * Validate D-PHY configuration according to MIPI D-PHY specification
+ * (v1.2, Section Section 6.9 "Global Operation Timing Parameters").
+ */
+int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
+{
+	unsigned long long ui;
+
+	if (!cfg)
+		return -EINVAL;
+
+	ui = ALIGN(PSEC_PER_SEC, cfg->hs_clk_rate);
+	do_div(ui, cfg->hs_clk_rate);
+
+	if (cfg->clk_miss > 60000)
+		return -EINVAL;
+
+	if (cfg->clk_post < (60000 + 52 * ui))
+		return -EINVAL;
+
+	if (cfg->clk_pre < 8000)
+		return -EINVAL;
+
+	if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000)
+		return -EINVAL;
+
+	if (cfg->clk_settle < 95000 || cfg->clk_settle > 300000)
+		return -EINVAL;
+
+	if (cfg->clk_term_en > 38000)
+		return -EINVAL;
+
+	if (cfg->clk_trail < 60000)
+		return -EINVAL;
+
+	if ((cfg->clk_prepare + cfg->clk_zero) < 300000)
+		return -EINVAL;
+
+	if (cfg->d_term_en > (35000 + 4 * ui))
+		return -EINVAL;
+
+	if (cfg->eot > (105000 + 12 * ui))
+		return -EINVAL;
+
+	if (cfg->hs_exit < 100000)
+		return -EINVAL;
+
+	if (cfg->hs_prepare < (40000 + 4 * ui) ||
+	    cfg->hs_prepare > (85000 + 6 * ui))
+		return -EINVAL;
+
+	if ((cfg->hs_prepare + cfg->hs_zero) < (145000 + 10 * ui))
+		return -EINVAL;
+
+	if ((cfg->hs_settle < (85000 + 6 * ui)) ||
+	    (cfg->hs_settle > (145000 + 10 * ui)))
+		return -EINVAL;
+
+	if (cfg->hs_skip < 40000 || cfg->hs_skip > (55000 + 4 * ui))
+		return -EINVAL;
+
+	if (cfg->hs_trail < max(8 * ui, 60000 + 4 * ui))
+		return -EINVAL;
+
+	if (cfg->init < 100000000)
+		return -EINVAL;
+
+	if (cfg->lpx < 50000)
+		return -EINVAL;
+
+	if (cfg->ta_get != (5 * cfg->lpx))
+		return -EINVAL;
+
+	if (cfg->ta_go != (4 * cfg->lpx))
+		return -EINVAL;
+
+	if (cfg->ta_sure < cfg->lpx || cfg->ta_sure > (2 * cfg->lpx))
+		return -EINVAL;
+
+	if (cfg->wakeup < 1000000000)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_mipi_dphy_config_validate);
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -360,7 +360,7 @@ int phy_power_off(struct phy *phy)
 }
 EXPORT_SYMBOL_GPL(phy_power_off);

-int phy_set_mode(struct phy *phy, enum phy_mode mode)
+int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
 {
 	int ret;

@@ -368,14 +368,14 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
 		return 0;

 	mutex_lock(&phy->mutex);
-	ret = phy->ops->set_mode(phy, mode);
+	ret = phy->ops->set_mode(phy, mode, submode);
 	if (!ret)
 		phy->attrs.mode = mode;
 	mutex_unlock(&phy->mutex);

 	return ret;
 }
-EXPORT_SYMBOL_GPL(phy_set_mode);
+EXPORT_SYMBOL_GPL(phy_set_mode_ext);

 int phy_reset(struct phy *phy)
 {
@@ -407,6 +407,70 @@ int phy_calibrate(struct phy *phy)
 }
 EXPORT_SYMBOL_GPL(phy_calibrate);

+/**
+ * phy_configure() - Changes the phy parameters
+ * @phy: the phy returned by phy_get()
+ * @opts: New configuration to apply
+ *
+ * Used to change the PHY parameters. phy_init() must have been called
+ * on the phy. The configuration will be applied on the current phy
+ * mode, that can be changed using phy_set_mode().
+ *
+ * Returns: 0 if successful, an negative error code otherwise
+ */
+int phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+	int ret;
+
+	if (!phy)
+		return -EINVAL;
+
+	if (!phy->ops->configure)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->configure(phy, opts);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_configure);
+
+/**
+ * phy_validate() - Checks the phy parameters
+ * @phy: the phy returned by phy_get()
+ * @mode: phy_mode the configuration is applicable to.
+ * @submode: PHY submode the configuration is applicable to.
+ * @opts: Configuration to check
+ *
+ * Used to check that the current set of parameters can be handled by
+ * the phy. Implementations are free to tune the parameters passed as
+ * arguments if needed by some implementation detail or
+ * constraints. It will not change any actual configuration of the
+ * PHY, so calling it as many times as deemed fit will have no side
+ * effect.
+ *
+ * Returns: 0 if successful, an negative error code otherwise
+ */
+int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
+		 union phy_configure_opts *opts)
+{
+	int ret;
+
+	if (!phy)
+		return -EINVAL;
+
+	if (!phy->ops->validate)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->validate(phy, mode, submode, opts);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_validate);
+
 /**
 * _of_phy_get() - lookup and obtain a reference to a phy by phandle
 * @np: device_node for which to get the phy

--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -72,6 +72,9 @@

 #define MAX_PROP_NAME				32

+/* Define the assumed distance between lanes for underspecified device trees. */
+#define QMP_PHY_LEGACY_LANE_STRIDE		0x400
+
 struct qmp_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
@@ -733,9 +736,6 @@ struct qmp_phy_cfg {
 	bool has_phy_dp_com_ctrl;
 	/* true, if PHY has secondary tx/rx lanes to be configured */
 	bool is_dual_lane_phy;
-	/* Register offset of secondary tx/rx lanes for USB DP combo PHY */
-	unsigned int tx_b_lane_offset;
-	unsigned int rx_b_lane_offset;

 	/* true, if PCS block has no separate SW_RESET register */
 	bool no_pcs_sw_reset;
@@ -748,6 +748,8 @@ struct qmp_phy_cfg {
 * @tx: iomapped memory space for lane's tx
 * @rx: iomapped memory space for lane's rx
 * @pcs: iomapped memory space for lane's pcs
+ * @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
+ * @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
 * @pcs_misc: iomapped memory space for lane's pcs_misc
 * @pipe_clk: pipe lock
 * @index: lane index
@@ -759,6 +761,8 @@ struct qmp_phy {
 	void __iomem *tx;
 	void __iomem *rx;
 	void __iomem *pcs;
+	void __iomem *tx2;
+	void __iomem *rx2;
 	void __iomem *pcs_misc;
 	struct clk *pipe_clk;
 	unsigned int index;
@@ -975,8 +979,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {

 	.has_phy_dp_com_ctrl	= true,
 	.is_dual_lane_phy	= true,
-	.tx_b_lane_offset	= 0x400,
-	.rx_b_lane_offset	= 0x400,
 };

 static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
@@ -1031,9 +1033,6 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
 	.mask_pcs_ready		= PCS_READY,

 	.is_dual_lane_phy	= true,
-	.tx_b_lane_offset	= 0x400,
-	.rx_b_lane_offset	= 0x400,
-
 	.no_pcs_sw_reset	= true,
 };

@@ -1238,12 +1237,12 @@ static int qcom_qmp_phy_init(struct phy *phy)
 	qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num);
 	/* Configuration for other LANE for USB-DP combo PHY */
 	if (cfg->is_dual_lane_phy)
-		qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs,
+		qcom_qmp_phy_configure(qphy->tx2, cfg->regs,
 				       cfg->tx_tbl, cfg->tx_tbl_num);

 	qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num);
 	if (cfg->is_dual_lane_phy)
-		qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs,
+		qcom_qmp_phy_configure(qphy->rx2, cfg->regs,
 				       cfg->rx_tbl, cfg->rx_tbl_num);

 	qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
@@ -1365,7 +1364,8 @@ static int qcom_qmp_phy_poweron(struct phy *phy)
 	return ret;
 }

-static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int qcom_qmp_phy_set_mode(struct phy *phy,
+				 enum phy_mode mode, int submode)
 {
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
@@ -1542,6 +1542,11 @@ static int qcom_qmp_phy_clk_init(struct device *dev)
 	return devm_clk_bulk_get(dev, num, qmp->clks);
 }

+static void phy_pipe_clk_release_provider(void *res)
+{
+	of_clk_del_provider(res);
+}
+
 /*
 * Register a fixed rate pipe clock.
 *
@@ -1588,7 +1593,23 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 	fixed->fixed_rate = 125000000;
 	fixed->hw.init = &init;

-	return devm_clk_hw_register(qmp->dev, &fixed->hw);
+	ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
+	if (ret)
+		return ret;
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+	if (ret)
+		return ret;
+
+	/*
+	 * Roll a devm action because the clock provider is the child node, but
+	 * the child node is not actually a device.
+	 */
+	ret = devm_add_action(qmp->dev, phy_pipe_clk_release_provider, np);
+	if (ret)
+		phy_pipe_clk_release_provider(np);
+
+	return ret;
 }

 static const struct phy_ops qcom_qmp_phy_gen_ops = {
@@ -1614,8 +1635,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)

 	/*
 	 * Get memory resources for each phy lane:
-	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2; and
-	 * pcs_misc (optional) -> 3.
+	 * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
+	 * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
+	 * For single lane PHYs: pcs_misc (optional) -> 3.
 	 */
 	qphy->tx = of_iomap(np, 0);
 	if (!qphy->tx)
@@ -1629,7 +1651,32 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 	if (!qphy->pcs)
 		return -ENOMEM;

-	qphy->pcs_misc = of_iomap(np, 3);
+	/*
+	 * If this is a dual-lane PHY, then there should be registers for the
+	 * second lane. Some old device trees did not specify this, so fall
+	 * back to old legacy behavior of assuming they can be reached at an
+	 * offset from the first lane.
+	 */
+	if (qmp->cfg->is_dual_lane_phy) {
+		qphy->tx2 = of_iomap(np, 3);
+		qphy->rx2 = of_iomap(np, 4);
+		if (!qphy->tx2 || !qphy->rx2) {
+			dev_warn(dev,
+				 "Underspecified device tree, falling back to legacy register regions\n");
+
+			/* In the old version, pcs_misc is at index 3. */
+			qphy->pcs_misc = qphy->tx2;
+			qphy->tx2 = qphy->tx + QMP_PHY_LEGACY_LANE_STRIDE;
+			qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
+
+		} else {
+			qphy->pcs_misc = of_iomap(np, 5);
+		}
+
+	} else {
+		qphy->pcs_misc = of_iomap(np, 3);
+	}
+
 	if (!qphy->pcs_misc)
 		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");


--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -425,7 +425,8 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 				 HSTX_TRIM_MASK);
 }

-static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int qusb2_phy_set_mode(struct phy *phy,
+			      enum phy_mode mode, int submode)
 {
 	struct qusb2_phy *qphy = phy_get_drvdata(phy);


--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
@@ -65,7 +65,8 @@ static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
 }

 static
-int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy,
+				   enum phy_mode mode, int submode)
 {
 	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);


--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
@@ -84,7 +84,8 @@ static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
 }

 static
-int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy,
+				   enum phy_mode mode, int submode)
 {
 	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);


--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -42,7 +42,8 @@ struct qcom_usb_hs_phy {
 	struct notifier_block vbus_notify;
 };

-static int qcom_usb_hs_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int qcom_usb_hs_phy_set_mode(struct phy *phy,
+				    enum phy_mode mode, int submode)
 {
 	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
 	u8 addr;

--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -307,16 +307,21 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 	void __iomem *usb2_base = ch->base;
 	u32 val;

+	/* Should not use functions of read-modify-write a register */
+	val = readl(usb2_base + USB2_LINECTRL1);
+	val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN |
+	      USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
+	writel(val, usb2_base + USB2_LINECTRL1);
+
 	val = readl(usb2_base + USB2_VBCTRL);
 	writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
-	writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
-	rcar_gen3_control_otg_irq(ch, 1);
 	val = readl(usb2_base + USB2_ADPCTRL);
 	writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
-	val = readl(usb2_base + USB2_LINECTRL1);
-	rcar_gen3_set_linectrl(ch, 0, 0);
-	writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
-	       usb2_base + USB2_LINECTRL1);
+
+	msleep(20);
+
+	writel(0xffffffff, usb2_base + USB2_OBINTSTA);
+	writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);

 	rcar_gen3_device_recognition(ch);
 }

--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1168,8 +1168,8 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		struct phy *phy;

 		/* This driver aims to support both otg-port and host-port */
-		if (of_node_cmp(child_np->name, "host-port") &&
-		    of_node_cmp(child_np->name, "otg-port"))
+		if (!of_node_name_eq(child_np, "host-port") &&
+		    !of_node_name_eq(child_np, "otg-port"))
 			goto next_child;

 		phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
@@ -1183,7 +1183,7 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		phy_set_drvdata(rport->phy, rport);

 		/* initialize otg/host port separately */
-		if (!of_node_cmp(child_np->name, "host-port")) {
+		if (of_node_name_eq(child_np, "host-port")) {
 			ret = rockchip_usb2phy_host_port_init(rphy, rport,
 							      child_np);
 			if (ret)

--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -1176,10 +1176,10 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 	for_each_available_child_of_node(np, child_np) {
 		struct phy *phy;

-		if (!of_node_cmp(child_np->name, "dp-port"))
+		if (of_node_name_eq(child_np, "dp-port"))
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_dp_phy_ops);
-		else if (!of_node_cmp(child_np->name, "usb3-port"))
+		else if (of_node_name_eq(child_np, "usb3-port"))
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_usb3_phy_ops);
 		else

--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -76,3 +76,13 @@ config TWL4030_USB
 	  family chips (including the TWL5030 and TPS659x0 devices).
 	  This transceiver supports high and full speed devices plus,
 	  in host mode, low speed.
+
+config PHY_TI_GMII_SEL
+	tristate
+	default y if TI_CPSW=y
+	depends on TI_CPSW || COMPILE_TEST
+	select GENERIC_PHY
+	default m
+	help
+	  This driver supports configuring of the TI CPSW Port mode depending on
+	  the Ethernet PHY connected to the CPSW Port.
--- a/drivers/phy/ti/Makefile
+++ b/drivers/phy/ti/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
 obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
 obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
 obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
+obj-$(CONFIG_PHY_TI_GMII_SEL)		+= phy-gmii-sel.o
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -93,7 +93,8 @@ static int da8xx_usb20_phy_power_off(struct phy *phy)
 	return 0;
 }

-static int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int da8xx_usb20_phy_set_mode(struct phy *phy,
+				    enum phy_mode mode, int submode)
 {
 	struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
 	u32 val;

--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments CPSW Port's PHY Interface Mode selection Driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on cpsw-phy-sel.c driver created by Mugunthan V N <mugunthanvnm@ti.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+/* AM33xx SoC specific definitions for the CONTROL port */
+#define AM33XX_GMII_SEL_MODE_MII	0
+#define AM33XX_GMII_SEL_MODE_RMII	1
+#define AM33XX_GMII_SEL_MODE_RGMII	2
+
+enum {
+	PHY_GMII_SEL_PORT_MODE,
+	PHY_GMII_SEL_RGMII_ID_MODE,
+	PHY_GMII_SEL_RMII_IO_CLK_EN,
+	PHY_GMII_SEL_LAST,
+};
+
+struct phy_gmii_sel_phy_priv {
+	struct phy_gmii_sel_priv *priv;
+	u32		id;
+	struct phy	*if_phy;
+	int		rmii_clock_external;
+	int		phy_if_mode;
+	struct regmap_field *fields[PHY_GMII_SEL_LAST];
+};
+
+struct phy_gmii_sel_soc_data {
+	u32 num_ports;
+	u32 features;
+	const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
+};
+
+struct phy_gmii_sel_priv {
+	struct device *dev;
+	const struct phy_gmii_sel_soc_data *soc_data;
+	struct regmap *regmap;
+	struct phy_provider *phy_provider;
+	struct phy_gmii_sel_phy_priv *if_phys;
+};
+
+static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct phy_gmii_sel_phy_priv *if_phy = phy_get_drvdata(phy);
+	const struct phy_gmii_sel_soc_data *soc_data = if_phy->priv->soc_data;
+	struct device *dev = if_phy->priv->dev;
+	struct regmap_field *regfield;
+	int ret, rgmii_id = 0;
+	u32 gmii_sel_mode = 0;
+
+	if (mode != PHY_MODE_ETHERNET)
+		return -EINVAL;
+
+	switch (submode) {
+	case PHY_INTERFACE_MODE_RMII:
+		gmii_sel_mode = AM33XX_GMII_SEL_MODE_RMII;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+		gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
+		rgmii_id = 1;
+		break;
+
+	case PHY_INTERFACE_MODE_MII:
+		mode = AM33XX_GMII_SEL_MODE_MII;
+		break;
+
+	default:
+		dev_warn(dev,
+			 "port%u: unsupported mode: \"%s\". Defaulting to MII.\n",
+			 if_phy->id, phy_modes(rgmii_id));
+		return -EINVAL;
+	}
+
+	if_phy->phy_if_mode = submode;
+
+	dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n",
+		__func__, if_phy->id, mode, rgmii_id,
+		if_phy->rmii_clock_external);
+
+	regfield = if_phy->fields[PHY_GMII_SEL_PORT_MODE];
+	ret = regmap_field_write(regfield, gmii_sel_mode);
+	if (ret) {
+		dev_err(dev, "port%u: set mode fail %d", if_phy->id, ret);
+		return ret;
+	}
+
+	if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE) &&
+	    if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE]) {
+		regfield = if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE];
+		ret = regmap_field_write(regfield, rgmii_id);
+		if (ret)
+			return ret;
+	}
+
+	if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) &&
+	    if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN]) {
+		regfield = if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN];
+		ret = regmap_field_write(regfield,
+					 if_phy->rmii_clock_external);
+	}
+
+	return 0;
+}
+
+static const
+struct reg_field phy_gmii_sel_fields_am33xx[][PHY_GMII_SEL_LAST] = {
+	{
+		[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 0, 1),
+		[PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 4, 4),
+		[PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 6, 6),
+	},
+	{
+		[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 2, 3),
+		[PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 5, 5),
+		[PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 7, 7),
+	},
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am33xx = {
+	.num_ports = 2,
+	.features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) |
+		    BIT(PHY_GMII_SEL_RMII_IO_CLK_EN),
+	.regfields = phy_gmii_sel_fields_am33xx,
+};
+
+static const
+struct reg_field phy_gmii_sel_fields_dra7[][PHY_GMII_SEL_LAST] = {
+	{
+		[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 0, 1),
+		[PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0),
+		[PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0),
+	},
+	{
+		[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 4, 5),
+		[PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0),
+		[PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0),
+	},
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dra7 = {
+	.num_ports = 2,
+	.regfields = phy_gmii_sel_fields_dra7,
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = {
+	.num_ports = 2,
+	.features = BIT(PHY_GMII_SEL_RGMII_ID_MODE),
+	.regfields = phy_gmii_sel_fields_am33xx,
+};
+
+static const struct of_device_id phy_gmii_sel_id_table[] = {
+	{
+		.compatible	= "ti,am3352-phy-gmii-sel",
+		.data		= &phy_gmii_sel_soc_am33xx,
+	},
+	{
+		.compatible	= "ti,dra7xx-phy-gmii-sel",
+		.data		= &phy_gmii_sel_soc_dra7,
+	},
+	{
+		.compatible	= "ti,am43xx-phy-gmii-sel",
+		.data		= &phy_gmii_sel_soc_am33xx,
+	},
+	{
+		.compatible	= "ti,dm814-phy-gmii-sel",
+		.data		= &phy_gmii_sel_soc_dm814,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
+
+static const struct phy_ops phy_gmii_sel_ops = {
+	.set_mode	= phy_gmii_sel_mode,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *phy_gmii_sel_of_xlate(struct device *dev,
+					 struct of_phandle_args *args)
+{
+	struct phy_gmii_sel_priv *priv = dev_get_drvdata(dev);
+	int phy_id = args->args[0];
+
+	if (args->args_count < 1)
+		return ERR_PTR(-EINVAL);
+	if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) &&
+	    args->args_count < 2)
+		return ERR_PTR(-EINVAL);
+	if (!priv || !priv->if_phys)
+		return ERR_PTR(-ENODEV);
+	if (phy_id > priv->soc_data->num_ports)
+		return ERR_PTR(-EINVAL);
+	if (phy_id != priv->if_phys[phy_id - 1].id)
+		return ERR_PTR(-EINVAL);
+
+	phy_id--;
+	if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN))
+		priv->if_phys[phy_id].rmii_clock_external = args->args[1];
+	dev_dbg(dev, "%s id:%u ext:%d\n", __func__,
+		priv->if_phys[phy_id].id, args->args[1]);
+
+	return priv->if_phys[phy_id].if_phy;
+}
+
+static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
+{
+	const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data;
+	struct device *dev = priv->dev;
+	struct phy_gmii_sel_phy_priv *if_phys;
+	int i, num_ports, ret;
+
+	num_ports = priv->soc_data->num_ports;
+
+	if_phys = devm_kcalloc(priv->dev, num_ports,
+			       sizeof(*if_phys), GFP_KERNEL);
+	if (!if_phys)
+		return -ENOMEM;
+	dev_dbg(dev, "%s %d\n", __func__, num_ports);
+
+	for (i = 0; i < num_ports; i++) {
+		const struct reg_field *field;
+		struct regmap_field *regfield;
+
+		if_phys[i].id = i + 1;
+		if_phys[i].priv = priv;
+
+		field = &soc_data->regfields[i][PHY_GMII_SEL_PORT_MODE];
+		dev_dbg(dev, "%s field %x %d %d\n", __func__,
+			field->reg, field->msb, field->lsb);
+
+		regfield = devm_regmap_field_alloc(dev, priv->regmap, *field);
+		if (IS_ERR(regfield))
+			return PTR_ERR(regfield);
+		if_phys[i].fields[PHY_GMII_SEL_PORT_MODE] = regfield;
+
+		field = &soc_data->regfields[i][PHY_GMII_SEL_RGMII_ID_MODE];
+		if (field->reg != (~0)) {
+			regfield = devm_regmap_field_alloc(dev,
+							   priv->regmap,
+							   *field);
+			if (IS_ERR(regfield))
+				return PTR_ERR(regfield);
+			if_phys[i].fields[PHY_GMII_SEL_RGMII_ID_MODE] =
+				regfield;
+		}
+
+		field = &soc_data->regfields[i][PHY_GMII_SEL_RMII_IO_CLK_EN];
+		if (field->reg != (~0)) {
+			regfield = devm_regmap_field_alloc(dev,
+							   priv->regmap,
+							   *field);
+			if (IS_ERR(regfield))
+				return PTR_ERR(regfield);
+			if_phys[i].fields[PHY_GMII_SEL_RMII_IO_CLK_EN] =
+				regfield;
+		}
+
+		if_phys[i].if_phy = devm_phy_create(dev,
+						    priv->dev->of_node,
+						    &phy_gmii_sel_ops);
+		if (IS_ERR(if_phys[i].if_phy)) {
+			ret = PTR_ERR(if_phys[i].if_phy);
+			dev_err(dev, "Failed to create phy%d %d\n", i, ret);
+			return ret;
+		}
+		phy_set_drvdata(if_phys[i].if_phy, &if_phys[i]);
+	}
+
+	priv->if_phys = if_phys;
+	return 0;
+}
+
+static int phy_gmii_sel_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	const struct of_device_id *of_id;
+	struct phy_gmii_sel_priv *priv;
+	int ret;
+
+	of_id = of_match_node(phy_gmii_sel_id_table, pdev->dev.of_node);
+	if (!of_id)
+		return -EINVAL;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->soc_data = of_id->data;
+
+	priv->regmap = syscon_node_to_regmap(node->parent);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		dev_err(dev, "Failed to get syscon %d\n", ret);
+		return ret;
+	}
+
+	ret = phy_gmii_sel_init_ports(priv);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(&pdev->dev, priv);
+
+	priv->phy_provider =
+		devm_of_phy_provider_register(dev,
+					      phy_gmii_sel_of_xlate);
+	if (IS_ERR(priv->phy_provider)) {
+		ret = PTR_ERR(priv->phy_provider);
+		dev_err(dev, "Failed to create phy provider %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver phy_gmii_sel_driver = {
+	.probe		= phy_gmii_sel_probe,
+	.driver		= {
+		.name	= "phy-gmii-sel",
+		.of_match_table = phy_gmii_sel_id_table,
+	},
+};
+module_platform_driver(phy_gmii_sel_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Grygorii Strashko <grygorii.strashko@ti.com>");
+MODULE_DESCRIPTION("TI CPSW Port's PHY Interface Mode selection Driver");
--- a/drivers/phy/ti/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -53,7 +53,7 @@ static int tusb1210_power_off(struct phy *phy)
 	return 0;
 }

-static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode)
+static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 {
 	struct tusb1210 *tusb = phy_get_drvdata(phy);
 	int ret;

--- a/include/linux/phy/phy-mipi-dphy.h
+++ b/include/linux/phy/phy-mipi-dphy.h
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ */
+
+#ifndef __PHY_MIPI_DPHY_H_
+#define __PHY_MIPI_DPHY_H_
+
+#include <video/videomode.h>
+
+/**
+ * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * MIPI D-PHY phy.
+ */
+struct phy_configure_opts_mipi_dphy {
+	/**
+	 * @clk_miss:
+	 *
+	 * Timeout, in picoseconds, for receiver to detect absence of
+	 * Clock transitions and disable the Clock Lane HS-RX.
+	 *
+	 * Maximum value: 60000 ps
+	 */
+	unsigned int		clk_miss;
+
+	/**
+	 * @clk_post:
+	 *
+	 * Time, in picoseconds, that the transmitter continues to
+	 * send HS clock after the last associated Data Lane has
+	 * transitioned to LP Mode. Interval is defined as the period
+	 * from the end of @hs_trail to the beginning of @clk_trail.
+	 *
+	 * Minimum value: 60000 ps + 52 * @hs_clk_rate period in ps
+	 */
+	unsigned int		clk_post;
+
+	/**
+	 * @clk_pre:
+	 *
+	 * Time, in UI, that the HS clock shall be driven by
+	 * the transmitter prior to any associated Data Lane beginning
+	 * the transition from LP to HS mode.
+	 *
+	 * Minimum value: 8 UI
+	 */
+	unsigned int		clk_pre;
+
+	/**
+	 * @clk_prepare:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the Clock
+	 * Lane LP-00 Line state immediately before the HS-0 Line
+	 * state starting the HS transmission.
+	 *
+	 * Minimum value: 38000 ps
+	 * Maximum value: 95000 ps
+	 */
+	unsigned int		clk_prepare;
+
+	/**
+	 * @clk_settle:
+	 *
+	 * Time interval, in picoseconds, during which the HS receiver
+	 * should ignore any Clock Lane HS transitions, starting from
+	 * the beginning of @clk_prepare.
+	 *
+	 * Minimum value: 95000 ps
+	 * Maximum value: 300000 ps
+	 */
+	unsigned int		clk_settle;
+
+	/**
+	 * @clk_term_en:
+	 *
+	 * Time, in picoseconds, for the Clock Lane receiver to enable
+	 * the HS line termination.
+	 *
+	 * Maximum value: 38000 ps
+	 */
+	unsigned int		clk_term_en;
+
+	/**
+	 * @clk_trail:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the HS-0
+	 * state after the last payload clock bit of a HS transmission
+	 * burst.
+	 *
+	 * Minimum value: 60000 ps
+	 */
+	unsigned int		clk_trail;
+
+	/**
+	 * @clk_zero:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the HS-0
+	 * state prior to starting the Clock.
+	 */
+	unsigned int		clk_zero;
+
+	/**
+	 * @d_term_en:
+	 *
+	 * Time, in picoseconds, for the Data Lane receiver to enable
+	 * the HS line termination.
+	 *
+	 * Maximum value: 35000 ps + 4 * @hs_clk_rate period in ps
+	 */
+	unsigned int		d_term_en;
+
+	/**
+	 * @eot:
+	 *
+	 * Transmitted time interval, in picoseconds, from the start
+	 * of @hs_trail or @clk_trail, to the start of the LP- 11
+	 * state following a HS burst.
+	 *
+	 * Maximum value: 105000 ps + 12 * @hs_clk_rate period in ps
+	 */
+	unsigned int		eot;
+
+	/**
+	 * @hs_exit:
+	 *
+	 * Time, in picoseconds, that the transmitter drives LP-11
+	 * following a HS burst.
+	 *
+	 * Minimum value: 100000 ps
+	 */
+	unsigned int		hs_exit;
+
+	/**
+	 * @hs_prepare:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the Data
+	 * Lane LP-00 Line state immediately before the HS-0 Line
+	 * state starting the HS transmission.
+	 *
+	 * Minimum value: 40000 ps + 4 * @hs_clk_rate period in ps
+	 * Maximum value: 85000 ps + 6 * @hs_clk_rate period in ps
+	 */
+	unsigned int		hs_prepare;
+
+	/**
+	 * @hs_settle:
+	 *
+	 * Time interval, in picoseconds, during which the HS receiver
+	 * shall ignore any Data Lane HS transitions, starting from
+	 * the beginning of @hs_prepare.
+	 *
+	 * Minimum value: 85000 ps + 6 * @hs_clk_rate period in ps
+	 * Maximum value: 145000 ps + 10 * @hs_clk_rate period in ps
+	 */
+	unsigned int		hs_settle;
+
+	/**
+	 * @hs_skip:
+	 *
+	 * Time interval, in picoseconds, during which the HS-RX
+	 * should ignore any transitions on the Data Lane, following a
+	 * HS burst. The end point of the interval is defined as the
+	 * beginning of the LP-11 state following the HS burst.
+	 *
+	 * Minimum value: 40000 ps
+	 * Maximum value: 55000 ps + 4 * @hs_clk_rate period in ps
+	 */
+	unsigned int		hs_skip;
+
+	/**
+	 * @hs_trail:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the
+	 * flipped differential state after last payload data bit of a
+	 * HS transmission burst
+	 *
+	 * Minimum value: max(8 * @hs_clk_rate period in ps,
+	 *		      60000 ps + 4 * @hs_clk_rate period in ps)
+	 */
+	unsigned int		hs_trail;
+
+	/**
+	 * @hs_zero:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the HS-0
+	 * state prior to transmitting the Sync sequence.
+	 */
+	unsigned int		hs_zero;
+
+	/**
+	 * @init:
+	 *
+	 * Time, in picoseconds for the initialization period to
+	 * complete.
+	 *
+	 * Minimum value: 100000000 ps
+	 */
+	unsigned int		init;
+
+	/**
+	 * @lpx:
+	 *
+	 * Transmitted length, in picoseconds, of any Low-Power state
+	 * period.
+	 *
+	 * Minimum value: 50000 ps
+	 */
+	unsigned int		lpx;
+
+	/**
+	 * @ta_get:
+	 *
+	 * Time, in picoseconds, that the new transmitter drives the
+	 * Bridge state (LP-00) after accepting control during a Link
+	 * Turnaround.
+	 *
+	 * Value: 5 * @lpx
+	 */
+	unsigned int		ta_get;
+
+	/**
+	 * @ta_go:
+	 *
+	 * Time, in picoseconds, that the transmitter drives the
+	 * Bridge state (LP-00) before releasing control during a Link
+	 * Turnaround.
+	 *
+	 * Value: 4 * @lpx
+	 */
+	unsigned int		ta_go;
+
+	/**
+	 * @ta_sure:
+	 *
+	 * Time, in picoseconds, that the new transmitter waits after
+	 * the LP-10 state before transmitting the Bridge state
+	 * (LP-00) during a Link Turnaround.
+	 *
+	 * Minimum value: @lpx
+	 * Maximum value: 2 * @lpx
+	 */
+	unsigned int		ta_sure;
+
+	/**
+	 * @wakeup:
+	 *
+	 * Time, in picoseconds, that a transmitter drives a Mark-1
+	 * state prior to a Stop state in order to initiate an exit
+	 * from ULPS.
+	 *
+	 * Minimum value: 1000000000 ps
+	 */
+	unsigned int		wakeup;
+
+	/**
+	 * @hs_clk_rate:
+	 *
+	 * Clock rate, in Hertz, of the high-speed clock.
+	 */
+	unsigned long		hs_clk_rate;
+
+	/**
+	 * @lp_clk_rate:
+	 *
+	 * Clock rate, in Hertz, of the low-power clock.
+	 */
+	unsigned long		lp_clk_rate;
+
+	/**
+	 * @lanes:
+	 *
+	 * Number of active data lanes used for the transmissions.
+	 */
+	unsigned char		lanes;
+};
+
+int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
+				     unsigned int bpp,
+				     unsigned int lanes,
+				     struct phy_configure_opts_mipi_dphy *cfg);
+int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg);
+
+#endif /* __PHY_MIPI_DPHY_H_ */
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -20,6 +20,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>

+#include <linux/phy/phy-mipi-dphy.h>
+
 struct phy;

 enum phy_mode {
@@ -35,13 +37,21 @@ enum phy_mode {
 	PHY_MODE_USB_DEVICE_HS,
 	PHY_MODE_USB_DEVICE_SS,
 	PHY_MODE_USB_OTG,
-	PHY_MODE_SGMII,
-	PHY_MODE_2500SGMII,
-	PHY_MODE_QSGMII,
-	PHY_MODE_10GKR,
 	PHY_MODE_UFS_HS_A,
 	PHY_MODE_UFS_HS_B,
 	PHY_MODE_PCIE,
+	PHY_MODE_ETHERNET,
+	PHY_MODE_MIPI_DPHY,
+};
+
+/**
+ * union phy_configure_opts - Opaque generic phy configuration
+ *
+ * @mipi_dphy:	Configuration set applicable for phys supporting
+ *		the MIPI_DPHY phy mode.
+ */
+union phy_configure_opts {
+	struct phy_configure_opts_mipi_dphy	mipi_dphy;
 };

 /**
@@ -60,7 +70,38 @@ struct phy_ops {
 	int	(*exit)(struct phy *phy);
 	int	(*power_on)(struct phy *phy);
 	int	(*power_off)(struct phy *phy);
-	int	(*set_mode)(struct phy *phy, enum phy_mode mode);
+	int	(*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
+
+	/**
+	 * @configure:
+	 *
+	 * Optional.
+	 *
+	 * Used to change the PHY parameters. phy_init() must have
+	 * been called on the phy.
+	 *
+	 * Returns: 0 if successful, an negative error code otherwise
+	 */
+	int	(*configure)(struct phy *phy, union phy_configure_opts *opts);
+
+	/**
+	 * @validate:
+	 *
+	 * Optional.
+	 *
+	 * Used to check that the current set of parameters can be
+	 * handled by the phy. Implementations are free to tune the
+	 * parameters passed as arguments if needed by some
+	 * implementation detail or constraints. It must not change
+	 * any actual configuration of the PHY, so calling it as many
+	 * times as deemed fit by the consumer must have no side
+	 * effect.
+	 *
+	 * Returns: 0 if the configuration can be applied, an negative
+	 * error code otherwise
+	 */
+	int	(*validate)(struct phy *phy, enum phy_mode mode, int submode,
+			    union phy_configure_opts *opts);
 	int	(*reset)(struct phy *phy);
 	int	(*calibrate)(struct phy *phy);
 	struct module *owner;
@@ -164,7 +205,13 @@ int phy_init(struct phy *phy);
 int phy_exit(struct phy *phy);
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
-int phy_set_mode(struct phy *phy, enum phy_mode mode);
+int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode);
+#define phy_set_mode(phy, mode) \
+	phy_set_mode_ext(phy, mode, 0)
+int phy_configure(struct phy *phy, union phy_configure_opts *opts);
+int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
+		 union phy_configure_opts *opts);
+
 static inline enum phy_mode phy_get_mode(struct phy *phy)
 {
 	return phy->attrs.mode;
@@ -278,13 +325,17 @@ static inline int phy_power_off(struct phy *phy)
 	return -ENOSYS;
 }

-static inline int phy_set_mode(struct phy *phy, enum phy_mode mode)
+static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode,
+				   int submode)
 {
 	if (!phy)
 		return 0;
 	return -ENOSYS;
 }

+#define phy_set_mode(phy, mode) \
+	phy_set_mode_ext(phy, mode, 0)
+
 static inline enum phy_mode phy_get_mode(struct phy *phy)
 {
 	return PHY_MODE_INVALID;
@@ -304,6 +355,24 @@ static inline int phy_calibrate(struct phy *phy)
 	return -ENOSYS;
 }

+static inline int phy_configure(struct phy *phy,
+				union phy_configure_opts *opts)
+{
+	if (!phy)
+		return 0;
+
+	return -ENOSYS;
+}
+
+static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
+			       union phy_configure_opts *opts)
+{
+	if (!phy)
+		return 0;
+
+	return -ENOSYS;
+}
+
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return -ENOSYS;