net: wireless: add brcm80211 drivers

Add the brcm80211 tree to drivers/net/wireless, and disable the version that's
in drivers/staging.  This version includes the sources currently in staging,
plus any changes that have been sent out for review.

Sources in staging will be deleted in a followup patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/Kconfig

@@ -271,6 +271,7 @@ config MWL8K
 source "drivers/net/wireless/ath/Kconfig"
 source "drivers/net/wireless/b43/Kconfig"
 source "drivers/net/wireless/b43legacy/Kconfig"
+source "drivers/net/wireless/brcm80211/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/ipw2x00/Kconfig"
 source "drivers/net/wireless/iwlwifi/Kconfig"

drivers/net/wireless/Makefile

@@ -58,3 +58,6 @@ obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx/
 obj-$(CONFIG_IWM)	+= iwmc3200wifi/
 
 obj-$(CONFIG_MWIFIEX)	+= mwifiex/
+obj-$(CONFIG_BRCMFMAC) += brcm80211/
+obj-$(CONFIG_BRCMUMAC) += brcm80211/
+obj-$(CONFIG_BRCMSMAC) += brcm80211/

drivers/net/wireless/brcm80211/Kconfig

+config BRCMUTIL
+	tristate
+
+config BRCMSMAC
+	tristate "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver"
+	depends on PCI
+	depends on MAC80211
+	depends on BCMA=n
+	select BRCMUTIL
+	select FW_LOADER
+	select CRC_CCITT
+	select CRC8
+	select CORDIC
+	---help---
+	  This module adds support for PCIe wireless adapters based on Broadcom
+	  IEEE802.11n SoftMAC chipsets.  If you choose to build a module, it'll
+	  be called brcmsmac.ko.
+
+config BRCMFMAC
+	tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver"
+	depends on MMC
+	depends on CFG80211
+	select BRCMUTIL
+	select FW_LOADER
+	---help---
+	  This module adds support for embedded wireless adapters based on
+	  Broadcom IEEE802.11n FullMAC chipsets.  This driver uses the kernel's
+	  wireless extensions subsystem.  If you choose to build a module,
+	  it'll be called brcmfmac.ko.
+
+config BRCMDBG
+	bool "Broadcom driver debug functions"
+	depends on BRCMSMAC || BRCMFMAC
+	---help---
+	  Selecting this enables additional code for debug purposes.

drivers/net/wireless/brcm80211/Makefile

+#
+# Makefile fragment for Broadcom 802.11n Networking Device Driver
+#
+# Copyright (c) 2010 Broadcom Corporation
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+# common flags
+subdir-ccflags-$(CONFIG_BRCMDBG)	+= -DBCMDBG
+
+obj-$(CONFIG_BRCMUTIL)	+= brcmutil/
+obj-$(CONFIG_BRCMFMAC)	+= brcmfmac/
+obj-$(CONFIG_BRCMSMAC)	+= brcmsmac/

drivers/net/wireless/brcm80211/brcmfmac/Makefile

+#
+# Makefile fragment for Broadcom 802.11n Networking Device Driver
+#
+# Copyright (c) 2010 Broadcom Corporation
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+ccflags-y += \
+	-Idrivers/net/wireless/brcm80211/brcmfmac	\
+	-Idrivers/net/wireless/brcm80211/include
+
+DHDOFILES = \
+	wl_cfg80211.o \
+	dhd_cdc.o \
+	dhd_common.o \
+	dhd_sdio.o	\
+	dhd_linux.o \
+	bcmsdh.o \
+	bcmsdh_sdmmc.o
+
+obj-$(CONFIG_BRCMFMAC) += brcmfmac.o
+brcmfmac-objs += $(DHDOFILES)
+ccflags-y += -D__CHECK_ENDIAN__

drivers/net/wireless/brcm80211/brcmfmac/bcmchip.h

+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _bcmchip_h_
+#define _bcmchip_h_
+
+/* bcm4329 */
+/* SDIO device core, ID 0x829 */
+#define BCM4329_CORE_BUS_BASE		0x18011000
+/* internal memory core, ID 0x80e */
+#define BCM4329_CORE_SOCRAM_BASE	0x18003000
+/* ARM Cortex M3 core, ID 0x82a */
+#define BCM4329_CORE_ARM_BASE		0x18002000
+#define BCM4329_RAMSIZE			0x48000
+/* firmware name */
+#define BCM4329_FW_NAME			"brcm/bcm4329-fullmac-4.bin"
+#define BCM4329_NV_NAME			"brcm/bcm4329-fullmac-4.txt"
+
+#endif				/* _bcmchip_h_ */

drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c

+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+/* ****************** SDIO CARD Interface Functions **************************/
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/sched.h>
+#include <linux/completion.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/card.h>
+
+#include <defs.h>
+#include <brcm_hw_ids.h>
+#include <brcmu_utils.h>
+#include <brcmu_wifi.h>
+#include <soc.h>
+#include "dhd.h"
+#include "dhd_bus.h"
+#include "dhd_dbg.h"
+#include "sdio_host.h"
+
+#define SDIOH_API_ACCESS_RETRY_LIMIT	2
+
+static void brcmf_sdioh_irqhandler(struct sdio_func *func)
+{
+	struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(&func->card->dev);
+
+	brcmf_dbg(TRACE, "***IRQHandler\n");
+
+	sdio_release_host(func);
+
+	brcmf_sdbrcm_isr(sdiodev->bus);
+
+	sdio_claim_host(func);
+}
+
+int brcmf_sdcard_intr_reg(struct brcmf_sdio_dev *sdiodev)
+{
+	brcmf_dbg(TRACE, "Entering\n");
+
+	sdio_claim_host(sdiodev->func[1]);
+	sdio_claim_irq(sdiodev->func[1], brcmf_sdioh_irqhandler);
+	sdio_release_host(sdiodev->func[1]);
+
+	return 0;
+}
+
+int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev)
+{
+	brcmf_dbg(TRACE, "Entering\n");
+
+	sdio_claim_host(sdiodev->func[1]);
+	sdio_release_irq(sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
+
+	return 0;
+}
+
+u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
+			 int *err)
+{
+	int status;
+	s32 retry = 0;
+	u8 data = 0;
+
+	do {
+		if (retry)	/* wait for 1 ms till bus get settled down */
+			udelay(1000);
+		status = brcmf_sdioh_request_byte(sdiodev, SDIOH_READ, fnc_num,
+						  addr, (u8 *) &data);
+	} while (status != 0
+		 && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
+	if (err)
+		*err = status;
+
+	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n",
+		  fnc_num, addr, data);
+
+	return data;
+}
+
+void
+brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
+		       u8 data, int *err)
+{
+	int status;
+	s32 retry = 0;
+
+	do {
+		if (retry)	/* wait for 1 ms till bus get settled down */
+			udelay(1000);
+		status = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, fnc_num,
+						  addr, (u8 *) &data);
+	} while (status != 0
+		 && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
+	if (err)
+		*err = status;
+
+	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, u8data = 0x%x\n",
+		  fnc_num, addr, data);
+}
+
+int
+brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
+{
+	int err = 0;
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW,
+			 (address >> 8) & SBSDIO_SBADDRLOW_MASK, &err);
+	if (!err)
+		brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
+				       SBSDIO_FUNC1_SBADDRMID,
+				       (address >> 16) & SBSDIO_SBADDRMID_MASK,
+				       &err);
+	if (!err)
+		brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_1,
+				       SBSDIO_FUNC1_SBADDRHIGH,
+				       (address >> 24) & SBSDIO_SBADDRHIGH_MASK,
+				       &err);
+
+	return err;
+}
+
+u32 brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size)
+{
+	int status;
+	u32 word = 0;
+	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+
+	brcmf_dbg(INFO, "fun = 1, addr = 0x%x\n", addr);
+
+	if (bar0 != sdiodev->sbwad) {
+		if (brcmf_sdcard_set_sbaddr_window(sdiodev, bar0))
+			return 0xFFFFFFFF;
+
+		sdiodev->sbwad = bar0;
+	}
+
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	if (size == 4)
+		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+	status = brcmf_sdioh_request_word(sdiodev, SDIOH_READ, SDIO_FUNC_1,
+					  addr, &word, size);
+
+	sdiodev->regfail = (status != 0);
+
+	brcmf_dbg(INFO, "u32data = 0x%x\n", word);
+
+	/* if ok, return appropriately masked word */
+	if (status == 0) {
+		switch (size) {
+		case sizeof(u8):
+			return word & 0xff;
+		case sizeof(u16):
+			return word & 0xffff;
+		case sizeof(u32):
+			return word;
+		default:
+			sdiodev->regfail = true;
+
+		}
+	}
+
+	/* otherwise, bad sdio access or invalid size */
+	brcmf_dbg(ERROR, "error reading addr 0x%04x size %d\n", addr, size);
+	return 0xFFFFFFFF;
+}
+
+u32 brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size,
+			   u32 data)
+{
+	int status;
+	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+	int err = 0;
+
+	brcmf_dbg(INFO, "fun = 1, addr = 0x%x, uint%ddata = 0x%x\n",
+		  addr, size * 8, data);
+
+	if (bar0 != sdiodev->sbwad) {
+		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
+		if (err)
+			return err;
+
+		sdiodev->sbwad = bar0;
+	}
+
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	if (size == 4)
+		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+	status =
+	    brcmf_sdioh_request_word(sdiodev, SDIOH_WRITE, SDIO_FUNC_1,
+				     addr, &data, size);
+	sdiodev->regfail = (status != 0);
+
+	if (status == 0)
+		return 0;
+
+	brcmf_dbg(ERROR, "error writing 0x%08x to addr 0x%04x size %d\n",
+		  data, addr, size);
+	return 0xFFFFFFFF;
+}
+
+bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev)
+{
+	return sdiodev->regfail;
+}
+
+int
+brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+		      uint flags,
+		      u8 *buf, uint nbytes, struct sk_buff *pkt)
+{
+	int status;
+	uint incr_fix;
+	uint width;
+	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+	int err = 0;
+
+	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n", fn, addr, nbytes);
+
+	/* Async not implemented yet */
+	if (flags & SDIO_REQ_ASYNC)
+		return -ENOTSUPP;
+
+	if (bar0 != sdiodev->sbwad) {
+		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
+		if (err)
+			return err;
+
+		sdiodev->sbwad = bar0;
+	}
+
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+
+	incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
+	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
+	if (width == 4)
+		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+	status = brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_READ,
+					    fn, addr, width, nbytes, buf, pkt);
+
+	return status;
+}
+
+int
+brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
+		      uint flags, u8 *buf, uint nbytes, struct sk_buff *pkt)
+{
+	uint incr_fix;
+	uint width;
+	uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+	int err = 0;
+
+	brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n", fn, addr, nbytes);
+
+	/* Async not implemented yet */
+	if (flags & SDIO_REQ_ASYNC)
+		return -ENOTSUPP;
+
+	if (bar0 != sdiodev->sbwad) {
+		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
+		if (err)
+			return err;
+
+		sdiodev->sbwad = bar0;
+	}
+
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+
+	incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
+	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
+	if (width == 4)
+		addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+	return brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_WRITE, fn,
+					  addr, width, nbytes, buf, pkt);
+}
+
+int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, u32 addr,
+			u8 *buf, uint nbytes)
+{
+	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+	return brcmf_sdioh_request_buffer(sdiodev, SDIOH_DATA_INC,
+		(rw ? SDIOH_WRITE : SDIOH_READ), SDIO_FUNC_1,
+		addr, 4, nbytes, buf, NULL);
+}
+
+int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
+{
+	char t_func = (char)fn;
+	brcmf_dbg(TRACE, "Enter\n");
+
+	/* issue abort cmd52 command through F0 */
+	brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0,
+				 SDIO_CCCR_ABORT, &t_func);
+
+	brcmf_dbg(TRACE, "Exit\n");
+	return 0;
+}
+
+int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
+{
+	u32 regs = 0;
+	int ret = 0;
+
+	ret = brcmf_sdioh_attach(sdiodev);
+	if (ret)
+		goto out;
+
+	regs = SI_ENUM_BASE;
+
+	/* Report the BAR, to fix if needed */
+	sdiodev->sbwad = SI_ENUM_BASE;
+
+	/* try to attach to the target device */
+	sdiodev->bus = brcmf_sdbrcm_probe(0, 0, 0, 0, regs, sdiodev);
+	if (!sdiodev->bus) {
+		brcmf_dbg(ERROR, "device attach failed\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+out:
+	if (ret)
+		brcmf_sdio_remove(sdiodev);
+
+	return ret;
+}
+EXPORT_SYMBOL(brcmf_sdio_probe);
+
+int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)
+{
+	if (sdiodev->bus) {
+		brcmf_sdbrcm_disconnect(sdiodev->bus);
+		sdiodev->bus = NULL;
+	}
+
+	brcmf_sdioh_detach(sdiodev);
+
+	sdiodev->sbwad = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(brcmf_sdio_remove);
+
+void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable)
+{
+	if (enable)
+		brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
+	else
+		brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
+}

drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h

+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCMF_BUS_H_
+#define _BRCMF_BUS_H_
+
+/* Packet alignment for most efficient SDIO (can change based on platform) */
+#define BRCMF_SDALIGN	(1 << 6)
+
+/* watchdog polling interval in ms */
+#define BRCMF_WD_POLL_MS	10
+
+/*
+ * Exported from brcmf bus module (brcmf_usb, brcmf_sdio)
+ */
+
+/* Indicate (dis)interest in finding dongles. */
+extern int brcmf_bus_register(void);
+extern void brcmf_bus_unregister(void);
+
+/* obtain linux device object providing bus function */
+extern struct device *brcmf_bus_get_device(struct brcmf_bus *bus);
+
+/* Stop bus module: clear pending frames, disable data flow */
+extern void brcmf_sdbrcm_bus_stop(struct brcmf_bus *bus);
+
+/* Initialize bus module: prepare for communication w/dongle */
+extern int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr);
+
+/* Send a data frame to the dongle.  Callee disposes of txp. */
+extern int brcmf_sdbrcm_bus_txdata(struct brcmf_bus *bus, struct sk_buff *txp);
+
+/* Send/receive a control message to/from the dongle.
+ * Expects caller to enforce a single outstanding transaction.
+ */
+extern int
+brcmf_sdbrcm_bus_txctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen);
+
+extern int
+brcmf_sdbrcm_bus_rxctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen);
+
+extern void brcmf_sdbrcm_wd_timer(struct brcmf_bus *bus, uint wdtick);
+
+#endif				/* _BRCMF_BUS_H_ */

drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h

+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCMF_DBG_H_
+#define _BRCMF_DBG_H_
+
+#if defined(BCMDBG)
+
+#define brcmf_dbg(level, fmt, ...)					\
+do {									\
+	if (BRCMF_ERROR_VAL == BRCMF_##level##_VAL) {			\
+		if (brcmf_msg_level & BRCMF_##level##_VAL) {		\
+			if (net_ratelimit())				\
+				printk(KERN_DEBUG "%s: " fmt,		\
+				       __func__, ##__VA_ARGS__);	\
+		}							\
+	} else {							\
+		if (brcmf_msg_level & BRCMF_##level##_VAL) {		\
+			printk(KERN_DEBUG "%s: " fmt,			\
+			       __func__, ##__VA_ARGS__);		\
+		}							\
+	}								\
+} while (0)
+
+#define BRCMF_DATA_ON()		(brcmf_msg_level & BRCMF_DATA_VAL)
+#define BRCMF_CTL_ON()		(brcmf_msg_level & BRCMF_CTL_VAL)
+#define BRCMF_HDRS_ON()		(brcmf_msg_level & BRCMF_HDRS_VAL)
+#define BRCMF_BYTES_ON()	(brcmf_msg_level & BRCMF_BYTES_VAL)
+#define BRCMF_GLOM_ON()		(brcmf_msg_level & BRCMF_GLOM_VAL)
+
+#else	/* (defined BCMDBG) || (defined BCMDBG) */
+
+#define brcmf_dbg(level, fmt, ...) no_printk(fmt, ##__VA_ARGS__)
+
+#define BRCMF_DATA_ON()		0
+#define BRCMF_CTL_ON()		0
+#define BRCMF_HDRS_ON()		0
+#define BRCMF_BYTES_ON()	0
+#define BRCMF_GLOM_ON()		0
+
+#endif				/* defined(BCMDBG) */
+
+extern int brcmf_msg_level;
+
+#endif				/* _BRCMF_DBG_H_ */

drivers/net/wireless/brcm80211/brcmfmac/dhd_proto.h

+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCMF_PROTO_H_
+#define _BRCMF_PROTO_H_
+
+/*
+ * Exported from the brcmf protocol module (brcmf_cdc)
+ */
+
+/* Linkage, sets prot link and updates hdrlen in pub */
+extern int brcmf_proto_attach(struct brcmf_pub *drvr);
+
+/* Unlink, frees allocated protocol memory (including brcmf_proto) */
+extern void brcmf_proto_detach(struct brcmf_pub *drvr);
+
+/* Initialize protocol: sync w/dongle state.
+ * Sets dongle media info (iswl, drv_version, mac address).
+ */
+extern int brcmf_proto_init(struct brcmf_pub *drvr);
+
+/* Stop protocol: sync w/dongle state. */
+extern void brcmf_proto_stop(struct brcmf_pub *drvr);
+
+/* Add any protocol-specific data header.
+ * Caller must reserve prot_hdrlen prepend space.
+ */
+extern void brcmf_proto_hdrpush(struct brcmf_pub *, int ifidx,
+				struct sk_buff *txp);
+
+/* Remove any protocol-specific data header. */
+extern int brcmf_proto_hdrpull(struct brcmf_pub *, int *ifidx,
+			       struct sk_buff *rxp);
+
+/* Use protocol to issue command to dongle */
+extern int brcmf_proto_dcmd(struct brcmf_pub *drvr, int ifidx,
+				struct brcmf_dcmd *dcmd, int len);
+
+/* Update local copy of dongle statistics */
+extern void brcmf_proto_dstats(struct brcmf_pub *drvr);
+
+extern int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr);
+
+extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx,
+				     uint cmd, void *buf, uint len);
+
+#endif				/* _BRCMF_PROTO_H_ */

drivers/net/wireless/brcm80211/brcmsmac/Makefile

+#
+# Makefile fragment for Broadcom 802.11n Networking Device Driver
+#
+# Copyright (c) 2010 Broadcom Corporation
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+ccflags-y := \
+	-D__CHECK_ENDIAN__ \
+	-Idrivers/net/wireless/brcm80211/brcmsmac \
+	-Idrivers/net/wireless/brcm80211/brcmsmac/phy \
+	-Idrivers/net/wireless/brcm80211/include
+
+BRCMSMAC_OFILES := \
+	mac80211_if.o \
+	ucode_loader.o \
+	ampdu.o \
+	antsel.o \
+	channel.o \
+	main.o \
+	phy_shim.o \
+	pmu.o \
+	rate.o \
+	stf.o \
+	aiutils.o \
+	phy/phy_cmn.o \
+	phy/phy_lcn.o \
+	phy/phy_n.o \
+	phy/phytbl_lcn.o \
+	phy/phytbl_n.o \
+	phy/phy_qmath.o \
+	otp.o \
+	srom.o \
+	dma.o \
+	nicpci.o \
+	brcms_trace_events.o
+
+MODULEPFX := brcmsmac
+
+obj-$(CONFIG_BRCMSMAC)	+= $(MODULEPFX).o
+$(MODULEPFX)-objs	= $(BRCMSMAC_OFILES)

drivers/net/wireless/brcm80211/brcmsmac/ampdu.h

+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCM_AMPDU_H_
+#define _BRCM_AMPDU_H_
+
+extern struct ampdu_info *brcms_c_ampdu_attach(struct brcms_c_info *wlc);
+extern void brcms_c_ampdu_detach(struct ampdu_info *ampdu);
+extern int brcms_c_sendampdu(struct ampdu_info *ampdu,
+			     struct brcms_txq_info *qi,
+			     struct sk_buff **aggp, int prec);
+extern void brcms_c_ampdu_dotxstatus(struct ampdu_info *ampdu, struct scb *scb,
+				 struct sk_buff *p, struct tx_status *txs);
+extern void brcms_c_ampdu_macaddr_upd(struct brcms_c_info *wlc);
+extern void brcms_c_ampdu_shm_upd(struct ampdu_info *ampdu);
+
+#endif				/* _BRCM_AMPDU_H_ */

drivers/net/wireless/brcm80211/brcmsmac/antsel.h

+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCM_ANTSEL_H_
+#define _BRCM_ANTSEL_H_
+
+extern struct antsel_info *brcms_c_antsel_attach(struct brcms_c_info *wlc);
+extern void brcms_c_antsel_detach(struct antsel_info *asi);
+extern void brcms_c_antsel_init(struct antsel_info *asi);
+extern void brcms_c_antsel_antcfg_get(struct antsel_info *asi, bool usedef,
+				  bool sel,
+				  u8 id, u8 fbid, u8 *antcfg,
+				  u8 *fbantcfg);
+extern u8 brcms_c_antsel_antsel2id(struct antsel_info *asi, u16 antsel);
+
+#endif /* _BRCM_ANTSEL_H_ */

drivers/net/wireless/brcm80211/brcmsmac/brcms_trace_events.c

+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h> /* bug in tracepoint.h, it should include this */
+
+#ifndef __CHECKER__
+#include "mac80211_if.h"
+#define CREATE_TRACE_POINTS
+#include "brcms_trace_events.h"
+#endif

drivers/net/wireless/brcm80211/brcmsmac/channel.h

+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _BRCM_CHANNEL_H_
+#define _BRCM_CHANNEL_H_
+
+/* conversion for phy txpwr calculations that use .25 dB units */
+#define BRCMS_TXPWR_DB_FACTOR 4
+
+/* bits for locale_info flags */
+#define BRCMS_PEAK_CONDUCTED	0x00	/* Peak for locals */
+#define BRCMS_EIRP		0x01	/* Flag for EIRP */
+#define BRCMS_DFS_TPC		0x02	/* Flag for DFS TPC */
+#define BRCMS_NO_OFDM		0x04	/* Flag for No OFDM */
+#define BRCMS_NO_40MHZ		0x08	/* Flag for No MIMO 40MHz */
+#define BRCMS_NO_MIMO		0x10	/* Flag for No MIMO, 20 or 40 MHz */
+#define BRCMS_RADAR_TYPE_EU       0x20	/* Flag for EU */
+#define BRCMS_DFS_FCC             BRCMS_DFS_TPC	/* Flag for DFS FCC */
+
+#define BRCMS_DFS_EU (BRCMS_DFS_TPC | BRCMS_RADAR_TYPE_EU) /* Flag for DFS EU */
+
+extern struct brcms_cm_info *
+brcms_c_channel_mgr_attach(struct brcms_c_info *wlc);
+
+extern void brcms_c_channel_mgr_detach(struct brcms_cm_info *wlc_cm);
+
+extern u8 brcms_c_channel_locale_flags_in_band(struct brcms_cm_info *wlc_cm,
+					   uint bandunit);
+
+extern bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm,
+				      u16 chspec);
+
+extern void brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm,
+				   u16 chanspec,
+				   struct txpwr_limits *txpwr);
+extern void brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm,
+				     u16 chanspec,
+				     u8 local_constraint_qdbm);
+
+#endif				/* _WLC_CHANNEL_H */

drivers/staging/Kconfig

@@ -44,7 +44,7 @@ source "drivers/staging/wlan-ng/Kconfig"
 
 source "drivers/staging/echo/Kconfig"
 
-source "drivers/staging/brcm80211/Kconfig"
+
 
 source "drivers/staging/comedi/Kconfig"