ARM: dts: sun8i: a23/a33: Fix Display Engine DTC warnings

Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -194,19 +194,14 @@ ports {
 				#size-cells = <0>;
 
 				tcon0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					tcon0_in_drc0: endpoint@0 {
-						reg = <0>;
+					tcon0_in_drc0: endpoint {
 						remote-endpoint = <&drc0_out_tcon0>;
 					};
 				};
 
 				tcon0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 				};
 			};
@@ -629,12 +624,9 @@ ports {
 				#size-cells = <0>;
 
 				fe0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					fe0_out_be0: endpoint@0 {
-						reg = <0>;
+					fe0_out_be0: endpoint {
 						remote-endpoint = <&be0_in_fe0>;
 					};
 				};
@@ -656,23 +648,17 @@ ports {
 				#size-cells = <0>;
 
 				be0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					be0_in_fe0: endpoint@0 {
-						reg = <0>;
+					be0_in_fe0: endpoint {
 						remote-endpoint = <&fe0_out_be0>;
 					};
 				};
 
 				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					be0_out_drc0: endpoint@0 {
-						reg = <0>;
+					be0_out_drc0: endpoint {
 						remote-endpoint = <&drc0_in_be0>;
 					};
 				};
@@ -696,23 +682,17 @@ ports {
 				#size-cells = <0>;
 
 				drc0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					drc0_in_be0: endpoint@0 {
-						reg = <0>;
+					drc0_in_be0: endpoint {
 						remote-endpoint = <&be0_out_drc0>;
 					};
 				};
 
 				drc0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					drc0_out_tcon0: endpoint@0 {
-						reg = <0>;
+					drc0_out_tcon0: endpoint {
 						remote-endpoint = <&tcon0_in_drc0>;
 					};
 				};

arch/arm/boot/dts/sun8i-a23-q8-tablet.dts

@@ -65,3 +65,9 @@ &codec {
 &panel {
 	compatible = "bananapi,s070wv20-ct16", "simple-panel";
 };
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};

arch/arm/boot/dts/sun8i-a33-q8-tablet.dts

@@ -48,3 +48,10 @@ / {
 	model = "Q8 A33 Tablet";
 	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};

arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts

@@ -63,16 +63,9 @@ chosen {
 
 	panel {
 		compatible = "netron-dy,e231732";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
+		port {
+			panel_input: endpoint {
 				remote-endpoint = <&tcon0_out_panel>;
 			};
 		};

arch/arm/boot/dts/sun8i-a33.dtsi

@@ -266,18 +266,9 @@ dsi: dsi@1ca0000 {
 			phy-names = "dphy";
 			status = "disabled";
 
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					dsi_in_tcon0: endpoint {
-						remote-endpoint = <&tcon0_out_dsi>;
-					};
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
 				};
 			};
 		};
@@ -420,6 +411,9 @@ &tcon0 {
 };
 
 &tcon0_out {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	tcon0_out_dsi: endpoint@1 {
 		reg = <1>;
 		remote-endpoint = <&dsi_in_tcon0>;

arch/arm/boot/dts/sun8i-q8-common.dtsi

@@ -54,16 +54,9 @@ panel: panel {
 		backlight = <&backlight>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
 		power-supply = <&reg_dc1sw>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		port@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
+		port {
+			panel_input: endpoint {
 				remote-endpoint = <&tcon0_out_lcd>;
 			};
 		};
@@ -120,13 +113,6 @@ &tcon0 {
 	status = "okay";
 };
 
-&tcon0_out {
-	tcon0_out_lcd: endpoint@0 {
-		reg = <0>;
-		remote-endpoint = <&panel_input>;
-	};
-};
-
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };