Commit 5be6155b authored by Shengjiu Wang's avatar Shengjiu Wang Committed by Mark Brown

ASoC: fsl_esai: Wrap some operations to be functions

Extract the operation to be functions, to improve the
readability.

In this patch, fsl_esai_hw_init, fsl_esai_register_restore,
fsl_esai_trigger_start and fsl_esai_trigger_stop are
extracted.
Signed-off-by: default avatarShengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: default avatarNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/804d7e75ae7e06a913479912b578b3538ca7cd3f.1562842206.git.shengjiu.wang@nxp.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 4dc057a7
......@@ -35,6 +35,7 @@
* @fifo_depth: depth of tx/rx FIFO
* @slot_width: width of each DAI slot
* @slots: number of slots
* @channels: channel num for tx or rx
* @hck_rate: clock rate of desired HCKx clock
* @sck_rate: clock rate of desired SCKx clock
* @hck_dir: the direction of HCKx pads
......@@ -57,6 +58,7 @@ struct fsl_esai {
u32 slots;
u32 tx_mask;
u32 rx_mask;
u32 channels[2];
u32 hck_rate[2];
u32 sck_rate[2];
bool hck_dir[2];
......@@ -543,64 +545,132 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
return 0;
}
static int fsl_esai_hw_init(struct fsl_esai *esai_priv)
{
struct platform_device *pdev = esai_priv->pdev;
int ret;
/* Reset ESAI unit */
ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
ESAI_ECR_ESAIEN | ESAI_ECR_ERST);
if (ret) {
dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret);
return ret;
}
/*
* We need to enable ESAI so as to access some of its registers.
* Otherwise, we would fail to dump regmap from user space.
*/
ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
ESAI_ECR_ESAIEN);
if (ret) {
dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret);
return ret;
}
regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
ESAI_PRRC_PDC_MASK, 0);
regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
ESAI_PCRC_PC_MASK, 0);
return 0;
}
static int fsl_esai_register_restore(struct fsl_esai *esai_priv)
{
int ret;
/* FIFO reset for safety */
regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR,
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR,
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
regcache_mark_dirty(esai_priv->regmap);
ret = regcache_sync(esai_priv->regmap);
if (ret)
return ret;
/* FIFO reset done */
regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
return 0;
}
static void fsl_esai_trigger_start(struct fsl_esai *esai_priv, bool tx)
{
u8 i, channels = esai_priv->channels[tx];
u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
u32 mask;
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN);
/* Write initial words reqiured by ESAI as normal procedure */
for (i = 0; tx && i < channels; i++)
regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);
/*
* When set the TE/RE in the end of enablement flow, there
* will be channel swap issue for multi data line case.
* In order to workaround this issue, we switch the bit
* enablement sequence to below sequence
* 1) clear the xSMB & xSMA: which is done in probe and
* stop state.
* 2) set TE/RE
* 3) set xSMB
* 4) set xSMA: xSMA is the last one in this flow, which
* will trigger esai to start.
*/
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask));
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask));
}
static void fsl_esai_trigger_stop(struct fsl_esai *esai_priv, bool tx)
{
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0);
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
ESAI_xSMA_xS_MASK, 0);
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
ESAI_xSMB_xS_MASK, 0);
/* Disable and reset FIFO */
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR);
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
ESAI_xFCR_xFR, 0);
}
static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
u8 i, channels = substream->runtime->channels;
u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
u32 mask;
esai_priv->channels[tx] = substream->runtime->channels;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN);
/* Write initial words reqiured by ESAI as normal procedure */
for (i = 0; tx && i < channels; i++)
regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);
/*
* When set the TE/RE in the end of enablement flow, there
* will be channel swap issue for multi data line case.
* In order to workaround this issue, we switch the bit
* enablement sequence to below sequence
* 1) clear the xSMB & xSMA: which is done in probe and
* stop state.
* 2) set TE/RE
* 3) set xSMB
* 4) set xSMA: xSMA is the last one in this flow, which
* will trigger esai to start.
*/
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask));
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask));
fsl_esai_trigger_start(esai_priv, tx);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0);
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
ESAI_xSMA_xS_MASK, 0);
regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
ESAI_xSMB_xS_MASK, 0);
/* Disable and reset FIFO */
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR);
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
ESAI_xFCR_xFR, 0);
fsl_esai_trigger_stop(esai_priv, tx);
break;
default:
return -EINVAL;
......@@ -866,22 +936,9 @@ static int fsl_esai_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, esai_priv);
/* Reset ESAI unit */
ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ERST);
if (ret) {
dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret);
return ret;
}
/*
* We need to enable ESAI so as to access some of its registers.
* Otherwise, we would fail to dump regmap from user space.
*/
ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ESAIEN);
if (ret) {
dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret);
ret = fsl_esai_hw_init(esai_priv);
if (ret)
return ret;
}
esai_priv->tx_mask = 0xFFFFFFFF;
esai_priv->rx_mask = 0xFFFFFFFF;
......@@ -955,20 +1012,10 @@ static int fsl_esai_runtime_resume(struct device *dev)
regcache_cache_only(esai->regmap, false);
/* FIFO reset for safety */
regmap_update_bits(esai->regmap, REG_ESAI_TFCR,
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
regmap_update_bits(esai->regmap, REG_ESAI_RFCR,
ESAI_xFCR_xFR, ESAI_xFCR_xFR);
ret = regcache_sync(esai->regmap);
ret = fsl_esai_register_restore(esai);
if (ret)
goto err_regcache_sync;
/* FIFO reset done */
regmap_update_bits(esai->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
regmap_update_bits(esai->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
return 0;
err_regcache_sync:
......@@ -991,7 +1038,6 @@ static int fsl_esai_runtime_suspend(struct device *dev)
struct fsl_esai *esai = dev_get_drvdata(dev);
regcache_cache_only(esai->regmap, true);
regcache_mark_dirty(esai->regmap);
if (!IS_ERR(esai->fsysclk))
clk_disable_unprepare(esai->fsysclk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment