Merge tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

UAPI Changes:

- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)

Core Changes:

- misc doc and bug fixes

Driver Changes:

- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)

* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
  drm/sun4i: Fix uninitialized variables in vi layer
  drm/fb-helper: Fix potential NULL pointer dereference
  gpu: drm: stm: Adopt SPDX identifiers
  gpu: drm: sti: Adopt SPDX identifiers
  drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
  drm/sun4i: Wire in DE2 YUV support
  drm/sun4i: Expand DE2 scaler lib with YUV support
  drm/sun4i: Add DE2 definitions for YUV formats
  drm/sun4i: Add DE2 CSC library
  drm/sun4i: Add CCSC property to DE2 configuration
  drm/sun4i: Add support for HW scaling to DE2
  drm/sun4i: Add scaler configuration to DE2 mixers
  drm/sun4i: Add support for DE2 VI planes
  drm/sun4i: Reorganize UI layer code in DE2
  drm/sun4i: Add support for all HW supported DE2 RGB formats
  drm/sun4i: Add multi plane support to DE2 driver
  drm/sun4i: Move interlace related code in DE2
  drm/sun4i: Move channel size related code in DE2
  drm/sun4i: Move line width setting in DE2
  drm/sun4i: Use values calculated by atomic check
  ...

Documentation/devicetree/bindings/display/ilitek,ili9225.txt

+Ilitek ILI9225 display panels
+
+This binding is for display panels using an Ilitek ILI9225 controller in SPI
+mode.
+
+Required properties:
+- compatible:	"ilitek,ili9225-2.2in-176x220"
+- rs-gpios:	Register select signal
+- reset-gpios:	Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	display@0{
+		compatible = "ilitek,ili9225-2.2in-176x220";
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+		rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		rotation = <270>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -154,6 +154,7 @@ i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 ifi	Ingenieurburo Fur Ic-Technologie (I/F/I)
+ilitek	ILI Technology Corporation (ILITEK)
 img	Imagination Technologies Ltd.
 infineon Infineon Technologies
 inforce	Inforce Computing

Documentation/gpu/drm-kms-helpers.rst

@@ -163,6 +163,9 @@ Panel Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_panel.c
    :export:
 
+.. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c
+   :export:
+
 Display Port Helper Functions Reference
 =======================================
 

Documentation/gpu/todo.rst

@@ -185,6 +185,15 @@ are better.
 
 Contact: Sean Paul, Maintainer of the driver you plan to convert
 
+Convert drivers to use simple modeset suspend/resume
+----------------------------------------------------
+
+Most drivers (except i915 and nouveau) that use
+drm_atomic_helper_suspend/resume() can probably be converted to use
+drm_mode_config_helper_suspend/resume().
+
+Contact: Maintainer of the driver you plan to convert
+
 Core refactorings
 =================
 
@@ -404,11 +413,6 @@ those drivers as simple as possible, so lots of room for refactoring:
   a drm_device wrong. Doesn't matter, since everyone else gets it wrong
   too :-)
 
-- With the fbdev pointer in dev->mode_config we could also make
-  suspend/resume helpers entirely generic, at least if we add a
-  dev->mode_config.suspend_state. We could even provide a generic pm_ops
-  structure with those.
-
 - also rework the drm_framebuffer_funcs->dirty hook wire-up, see above.
 
 Contact: Noralf Trønnes, Daniel Vetter

MAINTAINERS

@@ -4461,6 +4461,12 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
 F:	drivers/gpu/drm/tve200/
 
+DRM DRIVER FOR ILITEK ILI9225 PANELS
+M:	David Lechner <david@lechnology.com>
+S:	Maintained
+F:	drivers/gpu/drm/tinydrm/ili9225.c
+F:	Documentation/devicetree/bindings/display/ili9225.txt
+
 DRM DRIVER FOR INTEL I810 VIDEO CARDS
 S:	Orphan / Obsolete
 F:	drivers/gpu/drm/i810/

drivers/gpu/drm/Kconfig

@@ -7,6 +7,7 @@
 menuconfig DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
 	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select HDMI
 	select FB_CMDLINE
 	select I2C
@@ -26,6 +27,10 @@ config DRM_MIPI_DSI
 	bool
 	depends on DRM
 
+# Separate option because drm_panel_orientation_quirks.c is shared with fbdev
+config DRM_PANEL_ORIENTATION_QUIRKS
+	tristate
+
 config DRM_DP_AUX_CHARDEV
 	bool "DRM DP AUX Interface"
 	depends on DRM

drivers/gpu/drm/Makefile

@@ -47,6 +47,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
 
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
+obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
 obj-$(CONFIG_DRM_ARM)	+= arm/
 obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/

drivers/gpu/drm/arm/malidp_drv.c

@@ -27,6 +27,7 @@
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_modeset_helper.h>
 #include <drm/drm_of.h>
 
 #include "malidp_drv.h"
@@ -745,34 +746,15 @@ static int malidp_platform_remove(struct platform_device *pdev)
 static int __maybe_unused malidp_pm_suspend(struct device *dev)
 {
 	struct drm_device *drm = dev_get_drvdata(dev);
-	struct malidp_drm *malidp = drm->dev_private;
-
-	drm_kms_helper_poll_disable(drm);
-	console_lock();
-	drm_fbdev_cma_set_suspend(malidp->fbdev, 1);
-	console_unlock();
-	malidp->pm_state = drm_atomic_helper_suspend(drm);
-	if (IS_ERR(malidp->pm_state)) {
-		console_lock();
-		drm_fbdev_cma_set_suspend(malidp->fbdev, 0);
-		console_unlock();
-		drm_kms_helper_poll_enable(drm);
-		return PTR_ERR(malidp->pm_state);
-	}
 
-	return 0;
+	return drm_mode_config_helper_suspend(drm);
 }
 
 static int __maybe_unused malidp_pm_resume(struct device *dev)
 {
 	struct drm_device *drm = dev_get_drvdata(dev);
-	struct malidp_drm *malidp = drm->dev_private;
 
-	drm_atomic_helper_resume(drm, malidp->pm_state);
-	console_lock();
-	drm_fbdev_cma_set_suspend(malidp->fbdev, 0);
-	console_unlock();
-	drm_kms_helper_poll_enable(drm);
+	drm_mode_config_helper_resume(drm);
 
 	return 0;
 }

drivers/gpu/drm/arm/malidp_drv.h

@@ -24,7 +24,6 @@ struct malidp_drm {
 	struct drm_crtc crtc;
 	wait_queue_head_t wq;
 	atomic_t config_valid;
-	struct drm_atomic_state *pm_state;
 	u32 core_id;
 };
 

drivers/gpu/drm/drm_connector.c

@@ -24,6 +24,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
 
 #include "drm_crtc_internal.h"
 #include "drm_internal.h"
@@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
 	mutex_init(&connector->mutex);
 	connector->edid_blob_ptr = NULL;
 	connector->status = connector_status_unknown;
+	connector->display_info.panel_orientation =
+		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 
 	drm_connector_get_cmdline_mode(connector);
 
@@ -668,6 +671,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
 	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
 };
 
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
+	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
+	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
+	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
+};
+
 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
@@ -776,6 +786,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
  *
  * CRTC_ID:
  * 	Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ *	On some devices the LCD panel is mounted in the casing in such a way
+ *	that the up/top side of the panel does not match with the top side of
+ *	the device. Userspace can use this property to check for this.
+ *	Note that input coordinates from touchscreens (input devices with
+ *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ *	coordinates, so if userspace rotates the picture to adjust for
+ *	the orientation it must also apply the same transformation to the
+ *	touchscreen input coordinates.
  */
 
 int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1251,6 +1273,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
 }
 EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ *	initialize the connecters panel_orientation property
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function should only be called for built-in panels, after setting
+ * connector->display_info.panel_orientation first (if known).
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_info *info = &connector->display_info;
+	struct drm_property *prop;
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		info->panel_orientation = orientation_quirk;
+
+	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
+
+	prop = dev->mode_config.panel_orientation_property;
+	if (!prop) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				"panel orientation",
+				drm_panel_orientation_enum_list,
+				ARRAY_SIZE(drm_panel_orientation_enum_list));
+		if (!prop)
+			return -ENOMEM;
+
+		dev->mode_config.panel_orientation_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop,
+				   info->panel_orientation);
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)

drivers/gpu/drm/drm_fb_helper.c

@@ -41,6 +41,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 
+#include "drm_crtc_internal.h"
 #include "drm_crtc_helper_internal.h"
 
 static bool drm_fbdev_emulation = true;
@@ -177,7 +178,7 @@ EXPORT_SYMBOL(drm_fb_helper_add_one_connector);
  */
 int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
 {
-	struct drm_device *dev = fb_helper->dev;
+	struct drm_device *dev;
 	struct drm_connector *connector;
 	struct drm_connector_list_iter conn_iter;
 	int i, ret = 0;
@@ -185,6 +186,8 @@ int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
 	if (!drm_fbdev_emulation || !fb_helper)
 		return 0;
 
+	dev = fb_helper->dev;
+
 	mutex_lock(&fb_helper->lock);
 	drm_connector_list_iter_begin(dev, &conn_iter);
 	drm_for_each_connector_iter(connector, &conn_iter) {
@@ -356,6 +359,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave);
 static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
 {
 	struct drm_device *dev = fb_helper->dev;
+	struct drm_plane_state *plane_state;
 	struct drm_plane *plane;
 	struct drm_atomic_state *state;
 	int i, ret;
@@ -374,8 +378,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 retry:
 	plane_mask = 0;
 	drm_for_each_plane(plane, dev) {
-		struct drm_plane_state *plane_state;
-
 		plane_state = drm_atomic_get_plane_state(state, plane);
 		if (IS_ERR(plane_state)) {
 			ret = PTR_ERR(plane_state);
@@ -398,6 +400,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
+		struct drm_plane *primary = mode_set->crtc->primary;
+
+		/* Cannot fail as we've already gotten the plane state above */
+		plane_state = drm_atomic_get_new_plane_state(state, primary);
+		plane_state->rotation = fb_helper->crtc_info[i].rotation;
 
 		ret = __drm_atomic_helper_set_config(mode_set, state);
 		if (ret != 0)
@@ -829,6 +836,7 @@ int drm_fb_helper_init(struct drm_device *dev,
 		if (!fb_helper->crtc_info[i].mode_set.connectors)
 			goto out_free;
 		fb_helper->crtc_info[i].mode_set.num_connectors = 0;
+		fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
 	}
 
 	i = 0;
@@ -2357,6 +2365,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 	return best_score;
 }
 
+/*
+ * This function checks if rotation is necessary because of panel orientation
+ * and if it is, if it is supported.
+ * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
+ * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
+ * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
+ * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
+ * the unsupported rotation.
+ */
+static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
+				    struct drm_fb_helper_crtc *fb_crtc,
+				    struct drm_connector *connector)
+{
+	struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
+	uint64_t valid_mask = 0;
+	int i, rotation;
+
+	fb_crtc->rotation = DRM_MODE_ROTATE_0;
+
+	switch (connector->display_info.panel_orientation) {
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		rotation = DRM_MODE_ROTATE_180;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		rotation = DRM_MODE_ROTATE_90;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		rotation = DRM_MODE_ROTATE_270;
+		break;
+	default:
+		rotation = DRM_MODE_ROTATE_0;
+	}
+
+	/*
+	 * TODO: support 90 / 270 degree hardware rotation,
+	 * depending on the hardware this may require the framebuffer
+	 * to be in a specific tiling format.
+	 */
+	if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	for (i = 0; i < plane->rotation_property->num_values; i++)
+		valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+	if (!(rotation & valid_mask)) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	fb_crtc->rotation = rotation;
+	/* Rotating in hardware, fbcon should not rotate */
+	fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
+}
+
 static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			    u32 width, u32 height)
 {
@@ -2416,6 +2480,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 		drm_fb_helper_modeset_release(fb_helper,
 					      &fb_helper->crtc_info[i].mode_set);
 
+	fb_helper->sw_rotations = 0;
 	drm_fb_helper_for_each_connector(fb_helper, i) {
 		struct drm_display_mode *mode = modes[i];
 		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
@@ -2435,6 +2500,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			modeset->mode = drm_mode_duplicate(dev,
 							   fb_crtc->desired_mode);
 			drm_connector_get(connector);
+			drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
 			modeset->connectors[modeset->num_connectors++] = connector;
 			modeset->x = offset->x;
 			modeset->y = offset->y;
@@ -2476,6 +2542,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
 		}
 	}
 	mutex_unlock(&fb_helper->dev->mode_config.mutex);
+
+	switch (fb_helper->sw_rotations) {
+	case DRM_MODE_ROTATE_0:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_ROTATE_90:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_ROTATE_180:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_ROTATE_270:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	default:
+		/*
+		 * Multiple bits are set / multiple rotations requested
+		 * fbcon cannot handle separate rotation settings per
+		 * output, so fallback to unrotated.
+		 */
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+	}
 }
 
 /* Note: Drops fb_helper->lock before returning. */

drivers/gpu/drm/drm_modeset_helper.c

@@ -20,6 +20,9 @@
  * OF THIS SOFTWARE.
  */
 
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
 #include <drm/drm_modeset_helper.h>
 #include <drm/drm_plane_helper.h>
 
@@ -156,3 +159,76 @@ int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
 					 NULL);
 }
 EXPORT_SYMBOL(drm_crtc_init);
+
+/**
+ * drm_mode_config_helper_suspend - Modeset suspend helper
+ * @dev: DRM device
+ *
+ * This helper function takes care of suspending the modeset side. It disables
+ * output polling if initialized, suspends fbdev if used and finally calls
+ * drm_atomic_helper_suspend().
+ * If suspending fails, fbdev and polling is re-enabled.
+ *
+ * Returns:
+ * Zero on success, negative error code on error.
+ *
+ * See also:
+ * drm_kms_helper_poll_disable() and drm_fb_helper_set_suspend_unlocked().
+ */
+int drm_mode_config_helper_suspend(struct drm_device *dev)
+{
+	struct drm_atomic_state *state;
+
+	if (!dev)
+		return 0;
+
+	drm_kms_helper_poll_disable(dev);
+	drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 1);
+	state = drm_atomic_helper_suspend(dev);
+	if (IS_ERR(state)) {
+		drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0);
+		drm_kms_helper_poll_enable(dev);
+		return PTR_ERR(state);
+	}
+
+	dev->mode_config.suspend_state = state;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_config_helper_suspend);
+
+/**
+ * drm_mode_config_helper_resume - Modeset resume helper
+ * @dev: DRM device
+ *
+ * This helper function takes care of resuming the modeset side. It calls
+ * drm_atomic_helper_resume(), resumes fbdev if used and enables output polling
+ * if initiaized.
+ *
+ * Returns:
+ * Zero on success, negative error code on error.
+ *
+ * See also:
+ * drm_fb_helper_set_suspend_unlocked() and drm_kms_helper_poll_enable().
+ */
+int drm_mode_config_helper_resume(struct drm_device *dev)
+{
+	int ret;
+
+	if (!dev)
+		return 0;
+
+	if (WARN_ON(!dev->mode_config.suspend_state))
+		return -EINVAL;
+
+	ret = drm_atomic_helper_resume(dev, dev->mode_config.suspend_state);
+	if (ret)
+		DRM_ERROR("Failed to resume (%d)\n", ret);
+	dev->mode_config.suspend_state = NULL;
+
+	drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0);
+	drm_kms_helper_poll_enable(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_mode_config_helper_resume);

drivers/video/fbdev/core/fbcon_dmi_quirks.c → drivers/gpu/drm/drm_panel_orientation_quirks.c

+/* SPDX-License-Identifier: MIT */
 /*
- *  fbcon_dmi_quirks.c -- DMI based quirk detection for fbcon
+ * drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
  *
- *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
  *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
+ * Note the quirks in this file are shared with fbdev/efifb and as such
+ * must not depend on other drm code.
  */
 
 #include <linux/dmi.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include "fbcon.h"
+#include <drm/drm_connector.h>
+
+#ifdef CONFIG_DMI
 
 /*
  * Some x86 clamshell design devices use portrait tablet screens and a display
@@ -21,56 +21,56 @@
  * and a list of known BIOS dates to avoid false positives.
  */
 
-struct fbcon_dmi_rotate_data {
+struct drm_dmi_panel_orientation_data {
 	int width;
 	int height;
 	const char * const *bios_dates;
-	int rotate;
+	int orientation;
 };
 
-static const struct fbcon_dmi_rotate_data rotate_data_asus_t100ha = {
+static const struct drm_dmi_panel_orientation_data asus_t100ha = {
 	.width = 800,
 	.height = 1280,
-	.rotate = FB_ROTATE_CCW,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
 };
 
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_pocket = {
+static const struct drm_dmi_panel_orientation_data gpd_pocket = {
 	.width = 1200,
 	.height = 1920,
 	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
 		"07/05/2017", "08/07/2017", NULL },
-	.rotate = FB_ROTATE_CW,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_win = {
+static const struct drm_dmi_panel_orientation_data gpd_win = {
 	.width = 720,
 	.height = 1280,
 	.bios_dates = (const char * const []){
 		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
 		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
-	.rotate = FB_ROTATE_CW,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
-static const struct fbcon_dmi_rotate_data rotate_data_itworks_tw891 = {
+static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
 	.width = 800,
 	.height = 1280,
 	.bios_dates = (const char * const []){ "10/16/2015", NULL },
-	.rotate = FB_ROTATE_CW,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
-static const struct fbcon_dmi_rotate_data rotate_data_vios_lth17 = {
+static const struct drm_dmi_panel_orientation_data vios_lth17 = {
 	.width = 800,
 	.height = 1280,
-	.rotate = FB_ROTATE_CW,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
-static const struct dmi_system_id rotate_data[] = {
+static const struct dmi_system_id orientation_data[] = {
 	{	/* Asus T100HA */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
 		},
-		.driver_data = (void *)&rotate_data_asus_t100ha,
+		.driver_data = (void *)&asus_t100ha,
 	}, {	/*
 		 * GPD Pocket, note that the the DMI data is less generic then
 		 * it seems, devices with a board-vendor of "AMI Corporation"
@@ -83,7 +83,7 @@ static const struct dmi_system_id rotate_data[] = {
 		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
 		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
 		},
-		.driver_data = (void *)&rotate_data_gpd_pocket,
+		.driver_data = (void *)&gpd_pocket,
 	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
@@ -91,7 +91,7 @@ static const struct dmi_system_id rotate_data[] = {
 		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
 		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
 		},
-		.driver_data = (void *)&rotate_data_gpd_win,
+		.driver_data = (void *)&gpd_win,
 	}, {	/* I.T.Works TW891 */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
@@ -99,37 +99,54 @@ static const struct dmi_system_id rotate_data[] = {
 		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
 		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
 		},
-		.driver_data = (void *)&rotate_data_itworks_tw891,
+		.driver_data = (void *)&itworks_tw891,
 	}, {	/* VIOS LTH17 */
 		.matches = {
 		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
 		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "LTH17"),
 		},
-		.driver_data = (void *)&rotate_data_vios_lth17,
+		.driver_data = (void *)&vios_lth17,
 	},
 	{}
 };
 
-int fbcon_platform_get_rotate(struct fb_info *info)
+/**
+ * drm_get_panel_orientation_quirk - Check for panel orientation quirks
+ * @width: width in pixels of the panel
+ * @height: height in pixels of the panel
+ *
+ * This function checks for platform specific (e.g. DMI based) quirks
+ * providing info on panel_orientation for systems where this cannot be
+ * probed from the hard-/firm-ware. To avoid false-positive this function
+ * takes the panel resolution as argument and checks that against the
+ * resolution expected by the quirk-table entry.
+ *
+ * Note this function is also used outside of the drm-subsys, by for example
+ * the efifb code. Because of this this function gets compiled into its own
+ * kernel-module when built as a module.
+ *
+ * Returns:
+ * A DRM_MODE_PANEL_ORIENTATION_* value if there is a quirk for this system,
+ * or DRM_MODE_PANEL_ORIENTATION_UNKNOWN if there is no quirk.
+ */
+int drm_get_panel_orientation_quirk(int width, int height)
 {
 	const struct dmi_system_id *match;
-	const struct fbcon_dmi_rotate_data *data;
+	const struct drm_dmi_panel_orientation_data *data;
 	const char *bios_date;
 	int i;
 
-	for (match = dmi_first_match(rotate_data);
+	for (match = dmi_first_match(orientation_data);
 	     match;
 	     match = dmi_first_match(match + 1)) {
 		data = match->driver_data;
 
-		if (data->width != info->var.xres ||
-		    data->height != info->var.yres)
+		if (data->width != width ||
+		    data->height != height)
 			continue;
 
 		if (!data->bios_dates)
-			return data->rotate;
+			return data->orientation;
 
 		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
 		if (!bios_date)
@@ -137,9 +154,21 @@ int fbcon_platform_get_rotate(struct fb_info *info)
 
 		for (i = 0; data->bios_dates[i]; i++) {
 			if (!strcmp(data->bios_dates[i], bios_date))
-				return data->rotate;
+				return data->orientation;
 		}
 	}
 
-	return FB_ROTATE_UR;
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 }
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#else
+
+/* There are no quirks for non x86 devices yet */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#endif

drivers/gpu/drm/drm_prime.c

@@ -218,8 +218,9 @@ static void drm_gem_map_detach(struct dma_buf *dma_buf,
 	sgt = prime_attach->sgt;
 	if (sgt) {
 		if (prime_attach->dir != DMA_NONE)
-			dma_unmap_sg(attach->dev, sgt->sgl, sgt->nents,
-					prime_attach->dir);
+			dma_unmap_sg_attrs(attach->dev, sgt->sgl, sgt->nents,
+					   prime_attach->dir,
+					   DMA_ATTR_SKIP_CPU_SYNC);
 		sg_free_table(sgt);
 	}
 
@@ -277,7 +278,8 @@ static struct sg_table *drm_gem_map_dma_buf(struct dma_buf_attachment *attach,
 	sgt = obj->dev->driver->gem_prime_get_sg_table(obj);
 
 	if (!IS_ERR(sgt)) {
-		if (!dma_map_sg(attach->dev, sgt->sgl, sgt->nents, dir)) {
+		if (!dma_map_sg_attrs(attach->dev, sgt->sgl, sgt->nents, dir,
+				      DMA_ATTR_SKIP_CPU_SYNC)) {
 			sg_free_table(sgt);
 			kfree(sgt);
 			sgt = ERR_PTR(-ENOMEM);

drivers/gpu/drm/drm_probe_helper.c

@@ -216,8 +216,7 @@ enum drm_mode_status drm_connector_mode_valid(struct drm_connector *connector,
  * suspend/resume.
  *
  * Drivers can call this helper from their device resume implementation. It is
- * an error to call this when the output polling support has not yet been set
- * up.
+ * not an error to call this even when output polling isn't enabled.
  *
  * Note that calls to enable and disable polling must be strictly ordered, which
  * is automatically the case when they're only call from suspend/resume

drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c

@@ -27,6 +27,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_modeset_helper.h>
 
 #include "fsl_dcu_drm_crtc.h"
 #include "fsl_dcu_drm_drv.h"
@@ -188,26 +189,17 @@ static struct drm_driver fsl_dcu_drm_driver = {
 static int fsl_dcu_drm_pm_suspend(struct device *dev)
 {
 	struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
+	int ret;
 
 	if (!fsl_dev)
 		return 0;
 
 	disable_irq(fsl_dev->irq);
-	drm_kms_helper_poll_disable(fsl_dev->drm);
-
-	console_lock();
-	drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 1);
-	console_unlock();
-
-	fsl_dev->state = drm_atomic_helper_suspend(fsl_dev->drm);
-	if (IS_ERR(fsl_dev->state)) {
-		console_lock();
-		drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
-		console_unlock();
 
-		drm_kms_helper_poll_enable(fsl_dev->drm);
+	ret = drm_mode_config_helper_suspend(fsl_dev->drm);
+	if (ret) {
 		enable_irq(fsl_dev->irq);
-		return PTR_ERR(fsl_dev->state);
+		return ret;
 	}
 
 	clk_disable_unprepare(fsl_dev->clk);
@@ -233,13 +225,8 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
 		fsl_tcon_bypass_enable(fsl_dev->tcon);
 	fsl_dcu_drm_init_planes(fsl_dev->drm);
 	enable_irq(fsl_dev->irq);
-	drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
-
-	console_lock();
-	drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
-	console_unlock();
 
-	drm_kms_helper_poll_enable(fsl_dev->drm);
+	drm_mode_config_helper_resume(fsl_dev->drm);
 
 	return 0;
 }

drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h

@@ -196,7 +196,6 @@ struct fsl_dcu_drm_device {
 	struct drm_encoder encoder;
 	struct fsl_dcu_drm_connector connector;
 	const struct fsl_dcu_soc_data *soc;
-	struct drm_atomic_state *state;
 };
 
 int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);

drivers/gpu/drm/i915/intel_dsi.c

@@ -1666,6 +1666,27 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
 	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
 };
 
+static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+	enum plane plane;
+	u32 val;
+
+	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+		if (connector->encoder->crtc_mask == BIT(PIPE_B))
+			plane = PLANE_B;
+		else
+			plane = PLANE_A;
+
+		val = I915_READ(DSPCNTR(plane));
+		if (val & DISPPLANE_ROTATE_180)
+			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+	}
+
+	return orientation;
+}
+
 static void intel_dsi_add_properties(struct intel_connector *connector)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
@@ -1681,6 +1702,13 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
 								allowed_scalers);
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
+
+		connector->base.display_info.panel_orientation =
+			intel_dsi_get_panel_orientation(connector);
+		drm_connector_init_panel_orientation_property(
+				&connector->base,
+				connector->panel.fixed_mode->hdisplay,
+				connector->panel.fixed_mode->vdisplay);
 	}
 }
 

drivers/gpu/drm/sti/sti_awg_utils.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include "sti_awg_utils.h"

drivers/gpu/drm/sti/sti_awg_utils.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_AWG_UTILS_H_

drivers/gpu/drm/sti/sti_compositor.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/component.h>

drivers/gpu/drm/sti/sti_compositor.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_COMPOSITOR_H_

drivers/gpu/drm/sti/sti_crtc.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/gpu/drm/sti/sti_crtc.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_CRTC_H_

drivers/gpu/drm/sti/sti_cursor.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Vincent Abriou <vincent.abriou@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/seq_file.h>

drivers/gpu/drm/sti/sti_cursor.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2013
  * Authors: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_CURSOR_H_

drivers/gpu/drm/sti/sti_drv.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <drm/drmP.h>

drivers/gpu/drm/sti/sti_drv.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_DRV_H_

drivers/gpu/drm/sti/sti_dvo.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/gpu/drm/sti/sti_gdp.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 #include <linux/seq_file.h>
 

drivers/gpu/drm/sti/sti_gdp.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_GDP_H_

drivers/gpu/drm/sti/sti_hda.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/gpu/drm/sti/sti_hdmi.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/gpu/drm/sti/sti_hdmi.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_HDMI_H_

drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include "sti_hdmi_tx3g4c28phy.h"

drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_HDMI_TX3G4C28PHY_H_

drivers/gpu/drm/sti/sti_hqvdp.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/component.h>

drivers/gpu/drm/sti/sti_hqvdp_lut.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_HQVDP_LUT_H_

drivers/gpu/drm/sti/sti_mixer.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 #include <linux/seq_file.h>
 

drivers/gpu/drm/sti/sti_mixer.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_MIXER_H_

drivers/gpu/drm/sti/sti_plane.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <drm/drmP.h>

drivers/gpu/drm/sti/sti_plane.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_PLANE_H_

drivers/gpu/drm/sti/sti_tvout.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Vincent Abriou <vincent.abriou@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/gpu/drm/sti/sti_vid.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 #include <linux/seq_file.h>
 

drivers/gpu/drm/sti/sti_vid.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_VID_H_

drivers/gpu/drm/sti/sti_vtg.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Authors: Benjamin Gaignard <benjamin.gaignard@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          Vincent Abriou <vincent.abriou@st.com>
  *          for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/module.h>

drivers/gpu/drm/sti/sti_vtg.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2014
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _STI_VTG_H_

drivers/gpu/drm/stm/drv.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2017
  *
@@ -5,8 +6,6 @@
  *          Yannick Fertre <yannick.fertre@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          Mickael Reulier <mickael.reulier@st.com>
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/component.h>

drivers/gpu/drm/stm/dw_mipi_dsi-stm.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2017
  *
  * Authors: Philippe Cornu <philippe.cornu@st.com>
  *          Yannick Fertre <yannick.fertre@st.com>
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/gpu/drm/stm/ltdc.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics SA 2017
  *
@@ -5,8 +6,6 @@
  *          Yannick Fertre <yannick.fertre@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          Mickael Reulier <mickael.reulier@st.com>
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/clk.h>

drivers/gpu/drm/stm/ltdc.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics SA 2017
  *
@@ -5,8 +6,6 @@
  *          Yannick Fertre <yannick.fertre@st.com>
  *          Fabien Dessenne <fabien.dessenne@st.com>
  *          Mickael Reulier <mickael.reulier@st.com>
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _LTDC_H_

drivers/gpu/drm/sun4i/Makefile

@@ -9,7 +9,9 @@ sun4i-drm-hdmi-y		+= sun4i_hdmi_enc.o
 sun4i-drm-hdmi-y		+= sun4i_hdmi_i2c.o
 sun4i-drm-hdmi-y		+= sun4i_hdmi_tmds_clk.o
 
-sun8i-mixer-y			+= sun8i_mixer.o sun8i_layer.o
+sun8i-mixer-y			+= sun8i_mixer.o sun8i_ui_layer.o \
+				   sun8i_vi_layer.o sun8i_ui_scaler.o \
+				   sun8i_vi_scaler.o sun8i_csc.o
 
 sun4i-tcon-y			+= sun4i_crtc.o
 sun4i-tcon-y			+= sun4i_dotclock.o

drivers/gpu/drm/sun4i/sun4i_drv.c

@@ -187,13 +187,7 @@ static bool sun4i_drv_node_is_frontend(struct device_node *node)
 
 static bool sun4i_drv_node_is_tcon(struct device_node *node)
 {
-	return of_device_is_compatible(node, "allwinner,sun4i-a10-tcon") ||
-		of_device_is_compatible(node, "allwinner,sun5i-a13-tcon") ||
-		of_device_is_compatible(node, "allwinner,sun6i-a31-tcon") ||
-		of_device_is_compatible(node, "allwinner,sun6i-a31s-tcon") ||
-		of_device_is_compatible(node, "allwinner,sun7i-a20-tcon") ||
-		of_device_is_compatible(node, "allwinner,sun8i-a33-tcon") ||
-		of_device_is_compatible(node, "allwinner,sun8i-v3s-tcon");
+	return !!of_match_node(sun4i_tcon_of_table, node);
 }
 
 static int compare_of(struct device *dev, void *data)

drivers/gpu/drm/sun4i/sun4i_tcon.c

@@ -900,7 +900,8 @@ static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
 	/* nothing is supported */
 };
 
-static const struct of_device_id sun4i_tcon_of_table[] = {
+/* sun4i_drv uses this list to check if a device node is a TCON */
+const struct of_device_id sun4i_tcon_of_table[] = {
 	{ .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
 	{ .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks },
 	{ .compatible = "allwinner,sun6i-a31-tcon", .data = &sun6i_a31_quirks },
@@ -911,6 +912,7 @@ static const struct of_device_id sun4i_tcon_of_table[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
+EXPORT_SYMBOL(sun4i_tcon_of_table);
 
 static struct platform_driver sun4i_tcon_platform_driver = {
 	.probe		= sun4i_tcon_probe,

drivers/gpu/drm/sun4i/sun4i_tcon.h

@@ -197,4 +197,6 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
 void sun4i_tcon_set_status(struct sun4i_tcon *crtc,
 			   const struct drm_encoder *encoder, bool enable);
 
+extern const struct of_device_id sun4i_tcon_of_table[];
+
 #endif /* __SUN4I_TCON_H__ */

drivers/gpu/drm/sun4i/sun8i_csc.c

+/*
+ * Copyright (C) Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+
+#include "sun8i_csc.h"
+#include "sun8i_mixer.h"
+
+static const u32 ccsc_base[2][2] = {
+	{CCSC00_OFFSET, CCSC01_OFFSET},
+	{CCSC10_OFFSET, CCSC11_OFFSET},
+};
+
+/*
+ * Factors are in two's complement format, 10 bits for fractinal part.
+ * First tree values in each line are multiplication factor and last
+ * value is constant, which is added at the end.
+ */
+static const u32 yuv2rgb[] = {
+	0x000004A8, 0x00000000, 0x00000662, 0xFFFC845A,
+	0x000004A8, 0xFFFFFE6F, 0xFFFFFCBF, 0x00021DF4,
+	0x000004A8, 0x00000813, 0x00000000, 0xFFFBAC4A,
+};
+
+static const u32 yvu2rgb[] = {
+	0x000004A8, 0x00000662, 0x00000000, 0xFFFC845A,
+	0x000004A8, 0xFFFFFCBF, 0xFFFFFE6F, 0x00021DF4,
+	0x000004A8, 0x00000000, 0x00000813, 0xFFFBAC4A,
+};
+
+static void sun8i_csc_set_coefficients(struct regmap *map, u32 base,
+				       enum sun8i_csc_mode mode)
+{
+	const u32 *table;
+	int i, data;
+
+	switch (mode) {
+	case SUN8I_CSC_MODE_YUV2RGB:
+		table = yuv2rgb;
+		break;
+	case SUN8I_CSC_MODE_YVU2RGB:
+		table = yvu2rgb;
+		break;
+	default:
+		DRM_WARN("Wrong CSC mode specified.\n");
+		return;
+	}
+
+	for (i = 0; i < 12; i++) {
+		data = table[i];
+		/* For some reason, 0x200 must be added to constant parts */
+		if (((i + 1) & 3) == 0)
+			data += 0x200;
+		regmap_write(map, SUN8I_CSC_COEFF(base, i), data);
+	}
+}
+
+static void sun8i_csc_enable(struct regmap *map, u32 base, bool enable)
+{
+	u32 val;
+
+	if (enable)
+		val = SUN8I_CSC_CTRL_EN;
+	else
+		val = 0;
+
+	regmap_update_bits(map, SUN8I_CSC_CTRL(base), SUN8I_CSC_CTRL_EN, val);
+}
+
+void sun8i_csc_set_ccsc_coefficients(struct sun8i_mixer *mixer, int layer,
+				     enum sun8i_csc_mode mode)
+{
+	u32 base;
+
+	base = ccsc_base[mixer->cfg->ccsc][layer];
+
+	sun8i_csc_set_coefficients(mixer->engine.regs, base, mode);
+}
+
+void sun8i_csc_enable_ccsc(struct sun8i_mixer *mixer, int layer, bool enable)
+{
+	u32 base;
+
+	base = ccsc_base[mixer->cfg->ccsc][layer];
+
+	sun8i_csc_enable(mixer->engine.regs, base, enable);
+}

drivers/gpu/drm/sun4i/sun8i_csc.h

+/*
+ * Copyright (C) Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _SUN8I_CSC_H_
+#define _SUN8I_CSC_H_
+
+struct sun8i_mixer;
+
+/* VI channel CSC units offsets */
+#define CCSC00_OFFSET 0xAA050
+#define CCSC01_OFFSET 0xFA000
+#define CCSC10_OFFSET 0xA0000
+#define CCSC11_OFFSET 0xF0000
+
+#define SUN8I_CSC_CTRL(base)		(base + 0x0)
+#define SUN8I_CSC_COEFF(base, i)	(base + 0x10 + 4 * i)
+
+#define SUN8I_CSC_CTRL_EN		BIT(0)
+
+enum sun8i_csc_mode {
+	SUN8I_CSC_MODE_OFF,
+	SUN8I_CSC_MODE_YUV2RGB,
+	SUN8I_CSC_MODE_YVU2RGB,
+};
+
+void sun8i_csc_set_ccsc_coefficients(struct sun8i_mixer *mixer, int layer,
+				     enum sun8i_csc_mode mode);
+void sun8i_csc_enable_ccsc(struct sun8i_mixer *mixer, int layer, bool enable);
+
+#endif

drivers/gpu/drm/sun4i/sun8i_layer.c

-/*
- * Copyright (C) Icenowy Zheng <icenowy@aosc.io>
- *
- * Based on sun4i_layer.h, which is:
- *   Copyright (C) 2015 Free Electrons
- *   Copyright (C) 2015 NextThing Co
- *
- *   Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_plane_helper.h>
-#include <drm/drmP.h>
-
-#include "sun8i_layer.h"
-#include "sun8i_mixer.h"
-
-struct sun8i_plane_desc {
-	       enum drm_plane_type     type;
-	       const uint32_t          *formats;
-	       uint32_t                nformats;
-};
-
-static void sun8i_mixer_layer_atomic_disable(struct drm_plane *plane,
-					       struct drm_plane_state *old_state)
-{
-	struct sun8i_layer *layer = plane_to_sun8i_layer(plane);
-	struct sun8i_mixer *mixer = layer->mixer;
-
-	sun8i_mixer_layer_enable(mixer, layer->id, false);
-}
-
-static void sun8i_mixer_layer_atomic_update(struct drm_plane *plane,
-					      struct drm_plane_state *old_state)
-{
-	struct sun8i_layer *layer = plane_to_sun8i_layer(plane);
-	struct sun8i_mixer *mixer = layer->mixer;
-
-	sun8i_mixer_update_layer_coord(mixer, layer->id, plane);
-	sun8i_mixer_update_layer_formats(mixer, layer->id, plane);
-	sun8i_mixer_update_layer_buffer(mixer, layer->id, plane);
-	sun8i_mixer_layer_enable(mixer, layer->id, true);
-}
-
-static struct drm_plane_helper_funcs sun8i_mixer_layer_helper_funcs = {
-	.atomic_disable	= sun8i_mixer_layer_atomic_disable,
-	.atomic_update	= sun8i_mixer_layer_atomic_update,
-};
-
-static const struct drm_plane_funcs sun8i_mixer_layer_funcs = {
-	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
-	.atomic_duplicate_state	= drm_atomic_helper_plane_duplicate_state,
-	.destroy		= drm_plane_cleanup,
-	.disable_plane		= drm_atomic_helper_disable_plane,
-	.reset			= drm_atomic_helper_plane_reset,
-	.update_plane		= drm_atomic_helper_update_plane,
-};
-
-static const uint32_t sun8i_mixer_layer_formats[] = {
-	DRM_FORMAT_RGB888,
-	DRM_FORMAT_ARGB8888,
-	DRM_FORMAT_XRGB8888,
-};
-
-static const struct sun8i_plane_desc sun8i_mixer_planes[] = {
-	{
-		.type = DRM_PLANE_TYPE_PRIMARY,
-		.formats = sun8i_mixer_layer_formats,
-		.nformats = ARRAY_SIZE(sun8i_mixer_layer_formats),
-	},
-};
-
-static struct sun8i_layer *sun8i_layer_init_one(struct drm_device *drm,
-						struct sun8i_mixer *mixer,
-						const struct sun8i_plane_desc *plane)
-{
-	struct sun8i_layer *layer;
-	int ret;
-
-	layer = devm_kzalloc(drm->dev, sizeof(*layer), GFP_KERNEL);
-	if (!layer)
-		return ERR_PTR(-ENOMEM);
-
-	/* possible crtcs are set later */
-	ret = drm_universal_plane_init(drm, &layer->plane, 0,
-				       &sun8i_mixer_layer_funcs,
-				       plane->formats, plane->nformats,
-				       NULL, plane->type, NULL);
-	if (ret) {
-		dev_err(drm->dev, "Couldn't initialize layer\n");
-		return ERR_PTR(ret);
-	}
-
-	drm_plane_helper_add(&layer->plane,
-			     &sun8i_mixer_layer_helper_funcs);
-	layer->mixer = mixer;
-
-	return layer;
-}
-
-struct drm_plane **sun8i_layers_init(struct drm_device *drm,
-				     struct sunxi_engine *engine)
-{
-	struct drm_plane **planes;
-	struct sun8i_mixer *mixer = engine_to_sun8i_mixer(engine);
-	int i;
-
-	planes = devm_kcalloc(drm->dev, ARRAY_SIZE(sun8i_mixer_planes) + 1,
-			      sizeof(*planes), GFP_KERNEL);
-	if (!planes)
-		return ERR_PTR(-ENOMEM);
-
-	for (i = 0; i < ARRAY_SIZE(sun8i_mixer_planes); i++) {
-		const struct sun8i_plane_desc *plane = &sun8i_mixer_planes[i];
-		struct sun8i_layer *layer;
-
-		layer = sun8i_layer_init_one(drm, mixer, plane);
-		if (IS_ERR(layer)) {
-			dev_err(drm->dev, "Couldn't initialize %s plane\n",
-				i ? "overlay" : "primary");
-			return ERR_CAST(layer);
-		};
-
-		layer->id = i;
-		planes[i] = &layer->plane;
-	};
-
-	return planes;
-}

drivers/gpu/drm/sun4i/sun8i_layer.h

-/*
- * Copyright (C) Icenowy Zheng <icenowy@aosc.io>
- *
- * Based on sun4i_layer.h, which is:
- *   Copyright (C) 2015 Free Electrons
- *   Copyright (C) 2015 NextThing Co
- *
- *   Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#ifndef _SUN8I_LAYER_H_
-#define _SUN8I_LAYER_H_
-
-struct sunxi_engine;
-
-struct sun8i_layer {
-	struct drm_plane	plane;
-	struct sun4i_drv	*drv;
-	struct sun8i_mixer	*mixer;
-	int			id;
-};
-
-static inline struct sun8i_layer *
-plane_to_sun8i_layer(struct drm_plane *plane)
-{
-	return container_of(plane, struct sun8i_layer, plane);
-}
-
-struct drm_plane **sun8i_layers_init(struct drm_device *drm,
-				     struct sunxi_engine *engine);
-#endif /* _SUN8I_LAYER_H_ */

drivers/gpu/drm/sun4i/sun8i_mixer.h

@@ -14,10 +14,9 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "sun8i_csc.h"
 #include "sunxi_engine.h"
 
-#define SUN8I_MIXER_MAX_CHAN_COUNT		4
-
 #define SUN8I_MIXER_SIZE(w, h)			(((h) - 1) << 16 | ((w) - 1))
 #define SUN8I_MIXER_COORD(x, y)			((y) << 16 | (x))
 
@@ -26,14 +25,14 @@
 #define SUN8I_MIXER_GLOBAL_DBUFF		0x8
 #define SUN8I_MIXER_GLOBAL_SIZE			0xc
 
-#define SUN8I_MIXER_GLOBAL_CTL_RT_EN		0x1
+#define SUN8I_MIXER_GLOBAL_CTL_RT_EN		BIT(0)
 
-#define SUN8I_MIXER_GLOBAL_DBUFF_ENABLE		0x1
+#define SUN8I_MIXER_GLOBAL_DBUFF_ENABLE		BIT(0)
 
-#define SUN8I_MIXER_BLEND_FCOLOR_CTL		0x1000
+#define SUN8I_MIXER_BLEND_PIPE_CTL		0x1000
 #define SUN8I_MIXER_BLEND_ATTR_FCOLOR(x)	(0x1004 + 0x10 * (x) + 0x0)
 #define SUN8I_MIXER_BLEND_ATTR_INSIZE(x)	(0x1004 + 0x10 * (x) + 0x4)
-#define SUN8I_MIXER_BLEND_ATTR_OFFSET(x)	(0x1004 + 0x10 * (x) + 0x8)
+#define SUN8I_MIXER_BLEND_ATTR_COORD(x)		(0x1004 + 0x10 * (x) + 0x8)
 #define SUN8I_MIXER_BLEND_ROUTE			0x1080
 #define SUN8I_MIXER_BLEND_PREMULTIPLY		0x1084
 #define SUN8I_MIXER_BLEND_BKCOLOR		0x1088
@@ -45,57 +44,56 @@
 #define SUN8I_MIXER_BLEND_CK_MIN(x)		(0x10e0 + 0x04 * (x))
 #define SUN8I_MIXER_BLEND_OUTCTL		0x10fc
 
+#define SUN8I_MIXER_BLEND_PIPE_CTL_EN(pipe)	BIT(8 + pipe)
+#define SUN8I_MIXER_BLEND_PIPE_CTL_FC_EN(pipe)	BIT(pipe)
+/* colors are always in AARRGGBB format */
+#define SUN8I_MIXER_BLEND_COLOR_BLACK		0xff000000
 /* The following numbers are some still unknown magic numbers */
-#define SUN8I_MIXER_BLEND_ATTR_FCOLOR_DEF	0xff000000
-#define SUN8I_MIXER_BLEND_FCOLOR_CTL_DEF	0x00000101
-#define SUN8I_MIXER_BLEND_PREMULTIPLY_DEF	0x0
-#define SUN8I_MIXER_BLEND_BKCOLOR_DEF		0xff000000
 #define SUN8I_MIXER_BLEND_MODE_DEF		0x03010301
-#define SUN8I_MIXER_BLEND_CK_CTL_DEF		0x0
 
 #define SUN8I_MIXER_BLEND_OUTCTL_INTERLACED	BIT(1)
 
-/*
- * VI channels are not used now, but the support of them may be introduced in
- * the future.
- */
-
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch, layer) \
-			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x0)
-#define SUN8I_MIXER_CHAN_UI_LAYER_SIZE(ch, layer) \
-			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x4)
-#define SUN8I_MIXER_CHAN_UI_LAYER_COORD(ch, layer) \
-			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x8)
-#define SUN8I_MIXER_CHAN_UI_LAYER_PITCH(ch, layer) \
-			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0xc)
-#define SUN8I_MIXER_CHAN_UI_LAYER_TOP_LADDR(ch, layer) \
-			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x10)
-#define SUN8I_MIXER_CHAN_UI_LAYER_BOT_LADDR(ch, layer) \
-			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x14)
-#define SUN8I_MIXER_CHAN_UI_LAYER_FCOLOR(ch, layer) \
-			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x18)
-#define SUN8I_MIXER_CHAN_UI_TOP_HADDR(ch)	(0x2000 + 0x1000 * (ch) + 0x80)
-#define SUN8I_MIXER_CHAN_UI_BOT_HADDR(ch)	(0x2000 + 0x1000 * (ch) + 0x84)
-#define SUN8I_MIXER_CHAN_UI_OVL_SIZE(ch)	(0x2000 + 0x1000 * (ch) + 0x88)
-
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN		BIT(0)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_MASK	GENMASK(2, 1)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_MASK	GENMASK(11, 8)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MASK	GENMASK(31, 24)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_DEF	(1 << 1)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_ARGB8888	(0 << 8)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_XRGB8888	(4 << 8)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_RGB888	(8 << 8)
-#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_DEF	(0xff << 24)
+#define SUN8I_MIXER_FBFMT_ARGB8888	0
+#define SUN8I_MIXER_FBFMT_ABGR8888	1
+#define SUN8I_MIXER_FBFMT_RGBA8888	2
+#define SUN8I_MIXER_FBFMT_BGRA8888	3
+#define SUN8I_MIXER_FBFMT_XRGB8888	4
+#define SUN8I_MIXER_FBFMT_XBGR8888	5
+#define SUN8I_MIXER_FBFMT_RGBX8888	6
+#define SUN8I_MIXER_FBFMT_BGRX8888	7
+#define SUN8I_MIXER_FBFMT_RGB888	8
+#define SUN8I_MIXER_FBFMT_BGR888	9
+#define SUN8I_MIXER_FBFMT_RGB565	10
+#define SUN8I_MIXER_FBFMT_BGR565	11
+#define SUN8I_MIXER_FBFMT_ARGB4444	12
+#define SUN8I_MIXER_FBFMT_ABGR4444	13
+#define SUN8I_MIXER_FBFMT_RGBA4444	14
+#define SUN8I_MIXER_FBFMT_BGRA4444	15
+#define SUN8I_MIXER_FBFMT_ARGB1555	16
+#define SUN8I_MIXER_FBFMT_ABGR1555	17
+#define SUN8I_MIXER_FBFMT_RGBA5551	18
+#define SUN8I_MIXER_FBFMT_BGRA5551	19
+
+#define SUN8I_MIXER_FBFMT_YUYV		0
+#define SUN8I_MIXER_FBFMT_UYVY		1
+#define SUN8I_MIXER_FBFMT_YVYU		2
+#define SUN8I_MIXER_FBFMT_VYUY		3
+#define SUN8I_MIXER_FBFMT_NV16		4
+#define SUN8I_MIXER_FBFMT_NV61		5
+#define SUN8I_MIXER_FBFMT_YUV422	6
+/* format 7 doesn't exist */
+#define SUN8I_MIXER_FBFMT_NV12		8
+#define SUN8I_MIXER_FBFMT_NV21		9
+#define SUN8I_MIXER_FBFMT_YUV420	10
+/* format 11 doesn't exist */
+/* format 12 is semi-planar YUV411 UVUV */
+/* format 13 is semi-planar YUV411 VUVU */
+#define SUN8I_MIXER_FBFMT_YUV411	14
 
 /*
  * These sub-engines are still unknown now, the EN registers are here only to
  * be used to disable these sub-engines.
  */
-#define SUN8I_MIXER_VSU_EN			0x20000
-#define SUN8I_MIXER_GSU1_EN			0x30000
-#define SUN8I_MIXER_GSU2_EN			0x40000
-#define SUN8I_MIXER_GSU3_EN			0x50000
 #define SUN8I_MIXER_FCE_EN			0xa0000
 #define SUN8I_MIXER_BWS_EN			0xa2000
 #define SUN8I_MIXER_LTI_EN			0xa4000
@@ -104,9 +102,31 @@
 #define SUN8I_MIXER_FCC_EN			0xaa000
 #define SUN8I_MIXER_DCSC_EN			0xb0000
 
+struct de2_fmt_info {
+	u32			drm_fmt;
+	u32			de2_fmt;
+	bool			rgb;
+	enum sun8i_csc_mode	csc;
+};
+
+/**
+ * struct sun8i_mixer_cfg - mixer HW configuration
+ * @vi_num: number of VI channels
+ * @ui_num: number of UI channels
+ * @scaler_mask: bitmask which tells which channel supports scaling
+ *	First, scaler supports for VI channels is defined and after that, scaler
+ *	support for UI channels. For example, if mixer has 2 VI channels without
+ *	scaler and 2 UI channels with scaler, bitmask would be 0xC.
+ * @ccsc: select set of CCSC base addresses
+ *	Set value to 0 if this is first mixer or second mixer with VEP support.
+ *	Set value to 1 if this is second mixer without VEP support. Other values
+ *	are invalid.
+ */
 struct sun8i_mixer_cfg {
 	int		vi_num;
 	int		ui_num;
+	int		scaler_mask;
+	int		ccsc;
 };
 
 struct sun8i_mixer {
@@ -126,12 +146,5 @@ engine_to_sun8i_mixer(struct sunxi_engine *engine)
 	return container_of(engine, struct sun8i_mixer, engine);
 }
 
-void sun8i_mixer_layer_enable(struct sun8i_mixer *mixer,
-				int layer, bool enable);
-int sun8i_mixer_update_layer_coord(struct sun8i_mixer *mixer,
-				     int layer, struct drm_plane *plane);
-int sun8i_mixer_update_layer_formats(struct sun8i_mixer *mixer,
-				       int layer, struct drm_plane *plane);
-int sun8i_mixer_update_layer_buffer(struct sun8i_mixer *mixer,
-				      int layer, struct drm_plane *plane);
+const struct de2_fmt_info *sun8i_mixer_format_info(u32 format);
 #endif /* _SUN8I_MIXER_H_ */

drivers/gpu/drm/sun4i/sun8i_ui_layer.h

+/*
+ * Copyright (C) Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on sun4i_layer.h, which is:
+ *   Copyright (C) 2015 Free Electrons
+ *   Copyright (C) 2015 NextThing Co
+ *
+ *   Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _SUN8I_UI_LAYER_H_
+#define _SUN8I_UI_LAYER_H_
+
+#include <drm/drm_plane.h>
+
+#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch, layer) \
+			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x0)
+#define SUN8I_MIXER_CHAN_UI_LAYER_SIZE(ch, layer) \
+			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x4)
+#define SUN8I_MIXER_CHAN_UI_LAYER_COORD(ch, layer) \
+			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x8)
+#define SUN8I_MIXER_CHAN_UI_LAYER_PITCH(ch, layer) \
+			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0xc)
+#define SUN8I_MIXER_CHAN_UI_LAYER_TOP_LADDR(ch, layer) \
+			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x10)
+#define SUN8I_MIXER_CHAN_UI_LAYER_BOT_LADDR(ch, layer) \
+			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x14)
+#define SUN8I_MIXER_CHAN_UI_LAYER_FCOLOR(ch, layer) \
+			(0x2000 + 0x1000 * (ch) + 0x20 * (layer) + 0x18)
+#define SUN8I_MIXER_CHAN_UI_TOP_HADDR(ch)	(0x2000 + 0x1000 * (ch) + 0x80)
+#define SUN8I_MIXER_CHAN_UI_BOT_HADDR(ch)	(0x2000 + 0x1000 * (ch) + 0x84)
+#define SUN8I_MIXER_CHAN_UI_OVL_SIZE(ch)	(0x2000 + 0x1000 * (ch) + 0x88)
+
+#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN		BIT(0)
+#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_MASK	GENMASK(2, 1)
+#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_MASK	GENMASK(12, 8)
+#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_OFFSET	8
+#define SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MASK	GENMASK(31, 24)
+
+struct sun8i_mixer;
+
+struct sun8i_ui_layer {
+	struct drm_plane	plane;
+	struct sun8i_mixer	*mixer;
+	int			channel;
+	int			overlay;
+};
+
+static inline struct sun8i_ui_layer *
+plane_to_sun8i_ui_layer(struct drm_plane *plane)
+{
+	return container_of(plane, struct sun8i_ui_layer, plane);
+}
+
+struct sun8i_ui_layer *sun8i_ui_layer_init_one(struct drm_device *drm,
+					       struct sun8i_mixer *mixer,
+					       int index);
+#endif /* _SUN8I_UI_LAYER_H_ */

drivers/gpu/drm/sun4i/sun8i_ui_scaler.c

+/*
+ * Copyright (C) 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * Coefficients are taken from BSP driver, which is:
+ * Copyright (C) 2014-2015 Allwinner
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "sun8i_ui_scaler.h"
+
+static const u32 lan2coefftab16[240] = {
+	0x00004000, 0x00033ffe, 0x00063efc, 0x000a3bfb,
+	0xff0f37fb, 0xfe1433fb, 0xfd192ffb, 0xfd1f29fb,
+	0xfc2424fc, 0xfb291ffd, 0xfb2f19fd, 0xfb3314fe,
+	0xfb370fff, 0xfb3b0a00, 0xfc3e0600, 0xfe3f0300,
+
+	0xff053804, 0xff083801, 0xff0a3700, 0xff0e34ff,
+	0xff1232fd, 0xfe162ffd, 0xfd1b2cfc, 0xfd1f28fc,
+	0xfd2323fd, 0xfc281ffd, 0xfc2c1bfd, 0xfd2f16fe,
+	0xfd3212ff, 0xff340eff, 0x00360a00, 0x02370700,
+
+	0xff083207, 0xff0a3205, 0xff0d3103, 0xfe113001,
+	0xfe142e00, 0xfe182bff, 0xfe1b29fe, 0xfe1f25fe,
+	0xfe2222fe, 0xfe251ffe, 0xfe291bfe, 0xff2b18fe,
+	0x002e14fe, 0x013010ff, 0x03310dff, 0x05310a00,
+
+	0xff0a2e09, 0xff0c2e07, 0xff0f2d05, 0xff122c03,
+	0xfe152b02, 0xfe182901, 0xfe1b2700, 0xff1e24ff,
+	0xff2121ff, 0xff241eff, 0x00261bff, 0x012818ff,
+	0x022a15ff, 0x032c12ff, 0x052d0fff, 0x072d0c00,
+
+	0xff0c2a0b, 0xff0e2a09, 0xff102a07, 0xff132905,
+	0xff162803, 0xff182702, 0xff1b2501, 0xff1e2300,
+	0x00202000, 0x01221d00, 0x01251bff, 0x032618ff,
+	0x042815ff, 0x052913ff, 0x072a10ff, 0x092a0d00,
+
+	0xff0d280c, 0xff0f280a, 0xff112808, 0xff142706,
+	0xff162605, 0xff192503, 0x001b2302, 0x001d2201,
+	0x011f1f01, 0x01221d00, 0x02231b00, 0x04241800,
+	0x052616ff, 0x072713ff, 0x08271100, 0x0a280e00,
+
+	0xff0e260d, 0xff10260b, 0xff122609, 0xff142508,
+	0x00152506, 0x00182305, 0x001b2203, 0x011d2002,
+	0x011f1f01, 0x02201d01, 0x03221b00, 0x04231801,
+	0x06241600, 0x08251300, 0x09261100, 0x0b260f00,
+
+	0xff0e250e, 0xff10250c, 0x0011250a, 0x00142408,
+	0x00162307, 0x00182206, 0x011a2104, 0x011c2003,
+	0x021e1e02, 0x03201c01, 0x04211a01, 0x05221801,
+	0x07231600, 0x08241400, 0x0a241200, 0x0c241000,
+
+	0x000e240e, 0x0010240c, 0x0013230a, 0x00142309,
+	0x00162208, 0x01182106, 0x011a2005, 0x021b1f04,
+	0x031d1d03, 0x041e1c02, 0x05201a01, 0x06211801,
+	0x07221601, 0x09231400, 0x0a231300, 0x0c231100,
+
+	0x000f220f, 0x0011220d, 0x0013220b, 0x0015210a,
+	0x01162108, 0x01182007, 0x02191f06, 0x031a1e05,
+	0x041c1c04, 0x051d1b03, 0x061f1902, 0x07201801,
+	0x08211601, 0x0a211500, 0x0b221300, 0x0d221100,
+
+	0x0010210f, 0x0011210e, 0x0013210c, 0x0114200b,
+	0x01161f0a, 0x02171f08, 0x03181e07, 0x031a1d06,
+	0x041c1c04, 0x051d1a04, 0x071d1903, 0x081e1802,
+	0x091f1602, 0x0b1f1501, 0x0c211300, 0x0e201200,
+
+	0x00102010, 0x0012200e, 0x0013200d, 0x01151f0b,
+	0x01161f0a, 0x02171e09, 0x03191d07, 0x041a1c06,
+	0x051b1b05, 0x061c1a04, 0x071d1903, 0x081e1703,
+	0x0a1f1601, 0x0b1f1501, 0x0d201300, 0x0e201200,
+
+	0x00102010, 0x00121f0f, 0x00141f0d, 0x01141f0c,
+	0x02161e0a, 0x03171d09, 0x03181d08, 0x041a1c06,
+	0x051b1b05, 0x061c1a04, 0x081c1903, 0x091d1703,
+	0x0a1e1602, 0x0c1e1501, 0x0d1f1400, 0x0e1f1201,
+
+	0x00111e11, 0x00131e0f, 0x01131e0e, 0x02151d0c,
+	0x02161d0b, 0x03171c0a, 0x04181b09, 0x05191b07,
+	0x061a1a06, 0x071b1905, 0x091b1804, 0x0a1c1703,
+	0x0b1d1602, 0x0c1d1502, 0x0e1d1401, 0x0f1e1300,
+
+	0x00111e11, 0x00131d10, 0x01141d0e, 0x02151c0d,
+	0x03161c0b, 0x04171b0a, 0x05171b09, 0x06181a08,
+	0x07191907, 0x081a1806, 0x091a1805, 0x0a1b1704,
+	0x0b1c1603, 0x0d1c1502, 0x0e1d1401, 0x0f1d1301,
+};
+
+static int sun8i_ui_scaler_coef_index(unsigned int step)
+{
+	unsigned int scale, int_part, float_part;
+
+	scale = step >> (SUN8I_UI_SCALER_SCALE_FRAC - 3);
+	int_part = scale >> 3;
+	float_part = scale & 0x7;
+
+	switch (int_part) {
+	case 0:
+		return 0;
+	case 1:
+		return float_part;
+	case 2:
+		return 8 + (float_part >> 1);
+	case 3:
+		return 12;
+	case 4:
+		return 13;
+	default:
+		return 14;
+	}
+}
+
+void sun8i_ui_scaler_enable(struct sun8i_mixer *mixer, int layer, bool enable)
+{
+	int vi_cnt = mixer->cfg->vi_num;
+	u32 val;
+
+	if (WARN_ON(layer < vi_cnt))
+		return;
+
+	if (enable)
+		val = SUN8I_SCALER_GSU_CTRL_EN |
+		      SUN8I_SCALER_GSU_CTRL_COEFF_RDY;
+	else
+		val = 0;
+
+	regmap_write(mixer->engine.regs,
+		     SUN8I_SCALER_GSU_CTRL(vi_cnt, layer - vi_cnt), val);
+}
+
+void sun8i_ui_scaler_setup(struct sun8i_mixer *mixer, int layer,
+			   u32 src_w, u32 src_h, u32 dst_w, u32 dst_h,
+			   u32 hscale, u32 vscale, u32 hphase, u32 vphase)
+{
+	int vi_cnt = mixer->cfg->vi_num;
+	u32 insize, outsize;
+	int i, offset;
+
+	if (WARN_ON(layer < vi_cnt))
+		return;
+
+	hphase <<= SUN8I_UI_SCALER_PHASE_FRAC - 16;
+	vphase <<= SUN8I_UI_SCALER_PHASE_FRAC - 16;
+	hscale <<= SUN8I_UI_SCALER_SCALE_FRAC - 16;
+	vscale <<= SUN8I_UI_SCALER_SCALE_FRAC - 16;
+
+	insize = SUN8I_UI_SCALER_SIZE(src_w, src_h);
+	outsize = SUN8I_UI_SCALER_SIZE(dst_w, dst_h);
+
+	layer -= vi_cnt;
+
+	regmap_write(mixer->engine.regs,
+		     SUN8I_SCALER_GSU_OUTSIZE(vi_cnt, layer), outsize);
+	regmap_write(mixer->engine.regs,
+		     SUN8I_SCALER_GSU_INSIZE(vi_cnt, layer), insize);
+	regmap_write(mixer->engine.regs,
+		     SUN8I_SCALER_GSU_HSTEP(vi_cnt, layer), hscale);
+	regmap_write(mixer->engine.regs,
+		     SUN8I_SCALER_GSU_VSTEP(vi_cnt, layer), vscale);
+	regmap_write(mixer->engine.regs,
+		     SUN8I_SCALER_GSU_HPHASE(vi_cnt, layer), hphase);
+	regmap_write(mixer->engine.regs,
+		     SUN8I_SCALER_GSU_VPHASE(vi_cnt, layer), vphase);
+	offset = sun8i_ui_scaler_coef_index(hscale) *
+			SUN8I_UI_SCALER_COEFF_COUNT;
+	for (i = 0; i < SUN8I_UI_SCALER_COEFF_COUNT; i++)
+		regmap_write(mixer->engine.regs,
+			     SUN8I_SCALER_GSU_HCOEFF(vi_cnt, layer, i),
+			     lan2coefftab16[offset + i]);
+}

drivers/gpu/drm/sun4i/sun8i_ui_scaler.h

+/*
+ * Copyright (C) 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _SUN8I_UI_SCALER_H_
+#define _SUN8I_UI_SCALER_H_
+
+#include "sun8i_mixer.h"
+
+/* this two macros assumes 16 fractional bits which is standard in DRM */
+#define SUN8I_UI_SCALER_SCALE_MIN		1
+#define SUN8I_UI_SCALER_SCALE_MAX		((1UL << 20) - 1)
+
+#define SUN8I_UI_SCALER_SCALE_FRAC		20
+#define SUN8I_UI_SCALER_PHASE_FRAC		20
+#define SUN8I_UI_SCALER_COEFF_COUNT		16
+#define SUN8I_UI_SCALER_SIZE(w, h)		(((h) - 1) << 16 | ((w) - 1))
+
+#define SUN8I_SCALER_GSU_CTRL(vi_cnt, ui_idx) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x0)
+#define SUN8I_SCALER_GSU_OUTSIZE(vi_cnt, ui_idx) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x40)
+#define SUN8I_SCALER_GSU_INSIZE(vi_cnt, ui_idx) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x80)
+#define SUN8I_SCALER_GSU_HSTEP(vi_cnt, ui_idx) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x88)
+#define SUN8I_SCALER_GSU_VSTEP(vi_cnt, ui_idx) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x8c)
+#define SUN8I_SCALER_GSU_HPHASE(vi_cnt, ui_idx) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x90)
+#define SUN8I_SCALER_GSU_VPHASE(vi_cnt, ui_idx) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x98)
+#define SUN8I_SCALER_GSU_HCOEFF(vi_cnt, ui_idx, index) \
+	(0x20000 + 0x20000 * (vi_cnt) + 0x10000 * (ui_idx) + 0x200 + \
+	0x4 * (index))
+
+#define SUN8I_SCALER_GSU_CTRL_EN		BIT(0)
+#define SUN8I_SCALER_GSU_CTRL_COEFF_RDY		BIT(4)
+
+void sun8i_ui_scaler_enable(struct sun8i_mixer *mixer, int layer, bool enable);
+void sun8i_ui_scaler_setup(struct sun8i_mixer *mixer, int layer,
+			   u32 src_w, u32 src_h, u32 dst_w, u32 dst_h,
+			   u32 hscale, u32 vscale, u32 hphase, u32 vphase);
+
+#endif

drivers/gpu/drm/sun4i/sun8i_vi_layer.h

+/*
+ * Copyright (C) Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _SUN8I_VI_LAYER_H_
+#define _SUN8I_VI_LAYER_H_
+
+#include <drm/drm_plane.h>
+
+#define SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch, layer) \
+		(0x2000 + 0x1000 * (ch) + 0x30 * (layer) + 0x0)
+#define SUN8I_MIXER_CHAN_VI_LAYER_SIZE(ch, layer) \
+		(0x2000 + 0x1000 * (ch) + 0x30 * (layer) + 0x4)
+#define SUN8I_MIXER_CHAN_VI_LAYER_COORD(ch, layer) \
+		(0x2000 + 0x1000 * (ch) + 0x30 * (layer) + 0x8)
+#define SUN8I_MIXER_CHAN_VI_LAYER_PITCH(ch, layer, plane) \
+		(0x2000 + 0x1000 * (ch) + 0x30 * (layer) + 0xc + 4 * (plane))
+#define SUN8I_MIXER_CHAN_VI_LAYER_TOP_LADDR(ch, layer, plane) \
+		(0x2000 + 0x1000 * (ch) + 0x30 * (layer) + 0x18 + 4 * (plane))
+#define SUN8I_MIXER_CHAN_VI_OVL_SIZE(ch)	(0x2000 + 0x1000 * (ch) + 0xe8)
+
+#define SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN		BIT(0)
+/* RGB mode should be set for RGB formats and cleared for YCbCr */
+#define SUN8I_MIXER_CHAN_VI_LAYER_ATTR_RGB_MODE		BIT(15)
+#define SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_OFFSET	8
+#define SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_MASK	GENMASK(12, 8)
+
+struct sun8i_mixer;
+
+struct sun8i_vi_layer {
+	struct drm_plane	plane;
+	struct sun8i_mixer	*mixer;
+	int			channel;
+	int			overlay;
+};
+
+static inline struct sun8i_vi_layer *
+plane_to_sun8i_vi_layer(struct drm_plane *plane)
+{
+	return container_of(plane, struct sun8i_vi_layer, plane);
+}
+
+struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm,
+					       struct sun8i_mixer *mixer,
+					       int index);
+#endif /* _SUN8I_VI_LAYER_H_ */

drivers/gpu/drm/sun4i/sun8i_vi_scaler.h

+/*
+ * Copyright (C) 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _SUN8I_VI_SCALER_H_
+#define _SUN8I_VI_SCALER_H_
+
+#include <drm/drm_fourcc.h>
+#include "sun8i_mixer.h"
+
+/* this two macros assumes 16 fractional bits which is standard in DRM */
+#define SUN8I_VI_SCALER_SCALE_MIN		1
+#define SUN8I_VI_SCALER_SCALE_MAX		((1UL << 20) - 1)
+
+#define SUN8I_VI_SCALER_SCALE_FRAC		20
+#define SUN8I_VI_SCALER_PHASE_FRAC		20
+#define SUN8I_VI_SCALER_COEFF_COUNT		32
+#define SUN8I_VI_SCALER_SIZE(w, h)		(((h) - 1) << 16 | ((w) - 1))
+
+#define SUN8I_SCALER_VSU_CTRL(ch)	(0x20000 + 0x20000 * (ch) + 0x0)
+#define SUN8I_SCALER_VSU_OUTSIZE(ch)	(0x20000 + 0x20000 * (ch) + 0x40)
+#define SUN8I_SCALER_VSU_YINSIZE(ch)	(0x20000 + 0x20000 * (ch) + 0x80)
+#define SUN8I_SCALER_VSU_YHSTEP(ch)	(0x20000 + 0x20000 * (ch) + 0x88)
+#define SUN8I_SCALER_VSU_YVSTEP(ch)	(0x20000 + 0x20000 * (ch) + 0x8c)
+#define SUN8I_SCALER_VSU_YHPHASE(ch)	(0x20000 + 0x20000 * (ch) + 0x90)
+#define SUN8I_SCALER_VSU_YVPHASE(ch)	(0x20000 + 0x20000 * (ch) + 0x98)
+#define SUN8I_SCALER_VSU_CINSIZE(ch)	(0x20000 + 0x20000 * (ch) + 0xc0)
+#define SUN8I_SCALER_VSU_CHSTEP(ch)	(0x20000 + 0x20000 * (ch) + 0xc8)
+#define SUN8I_SCALER_VSU_CVSTEP(ch)	(0x20000 + 0x20000 * (ch) + 0xcc)
+#define SUN8I_SCALER_VSU_CHPHASE(ch)	(0x20000 + 0x20000 * (ch) + 0xd0)
+#define SUN8I_SCALER_VSU_CVPHASE(ch)	(0x20000 + 0x20000 * (ch) + 0xd8)
+#define SUN8I_SCALER_VSU_YHCOEFF0(ch, i) \
+	(0x20000 + 0x20000 * (ch) + 0x200 + 0x4 * (i))
+#define SUN8I_SCALER_VSU_YHCOEFF1(ch, i) \
+	(0x20000 + 0x20000 * (ch) + 0x300 + 0x4 * (i))
+#define SUN8I_SCALER_VSU_YVCOEFF(ch, i) \
+	(0x20000 + 0x20000 * (ch) + 0x400 + 0x4 * (i))
+#define SUN8I_SCALER_VSU_CHCOEFF0(ch, i) \
+	(0x20000 + 0x20000 * (ch) + 0x600 + 0x4 * (i))
+#define SUN8I_SCALER_VSU_CHCOEFF1(ch, i) \
+	(0x20000 + 0x20000 * (ch) + 0x700 + 0x4 * (i))
+#define SUN8I_SCALER_VSU_CVCOEFF(ch, i) \
+	(0x20000 + 0x20000 * (ch) + 0x800 + 0x4 * (i))
+
+#define SUN8I_SCALER_VSU_CTRL_EN		BIT(0)
+#define SUN8I_SCALER_VSU_CTRL_COEFF_RDY		BIT(4)
+
+void sun8i_vi_scaler_enable(struct sun8i_mixer *mixer, int layer, bool enable);
+void sun8i_vi_scaler_setup(struct sun8i_mixer *mixer, int layer,
+			   u32 src_w, u32 src_h, u32 dst_w, u32 dst_h,
+			   u32 hscale, u32 vscale, u32 hphase, u32 vphase,
+			   const struct drm_format_info *format);
+
+#endif

drivers/gpu/drm/tinydrm/Kconfig

@@ -12,6 +12,16 @@ menuconfig DRM_TINYDRM
 config TINYDRM_MIPI_DBI
 	tristate
 
+config TINYDRM_ILI9225
+	tristate "DRM support for ILI9225 display panels"
+	depends on DRM_TINYDRM && SPI
+	select TINYDRM_MIPI_DBI
+	help
+	  DRM driver for the following Ilitek ILI9225 panels:
+	  * No-name 2.2" color screen module
+
+	  If M is selected the module will be called ili9225.
+
 config TINYDRM_MI0283QT
 	tristate "DRM support for MI0283QT"
 	depends on DRM_TINYDRM && SPI

drivers/gpu/drm/tinydrm/Makefile

@@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_TINYDRM)		+= core/
 obj-$(CONFIG_TINYDRM_MIPI_DBI)		+= mipi-dbi.o
 
 # Displays
+obj-$(CONFIG_TINYDRM_ILI9225)		+= ili9225.o
 obj-$(CONFIG_TINYDRM_MI0283QT)		+= mi0283qt.o
 obj-$(CONFIG_TINYDRM_REPAPER)		+= repaper.o
 obj-$(CONFIG_TINYDRM_ST7586)		+= st7586.o

drivers/gpu/drm/tinydrm/core/tinydrm-core.c

@@ -292,71 +292,4 @@ void tinydrm_shutdown(struct tinydrm_device *tdev)
 }
 EXPORT_SYMBOL(tinydrm_shutdown);
 
-/**
- * tinydrm_suspend - Suspend tinydrm
- * @tdev: tinydrm device
- *
- * Used in driver PM operations to suspend tinydrm.
- * Suspends fbdev and DRM.
- * Resume with tinydrm_resume().
- *
- * Returns:
- * Zero on success, negative error code on failure.
- */
-int tinydrm_suspend(struct tinydrm_device *tdev)
-{
-	struct drm_atomic_state *state;
-
-	if (tdev->suspend_state) {
-		DRM_ERROR("Failed to suspend: state already set\n");
-		return -EINVAL;
-	}
-
-	drm_fbdev_cma_set_suspend_unlocked(tdev->fbdev_cma, 1);
-	state = drm_atomic_helper_suspend(tdev->drm);
-	if (IS_ERR(state)) {
-		drm_fbdev_cma_set_suspend_unlocked(tdev->fbdev_cma, 0);
-		return PTR_ERR(state);
-	}
-
-	tdev->suspend_state = state;
-
-	return 0;
-}
-EXPORT_SYMBOL(tinydrm_suspend);
-
-/**
- * tinydrm_resume - Resume tinydrm
- * @tdev: tinydrm device
- *
- * Used in driver PM operations to resume tinydrm.
- * Suspend with tinydrm_suspend().
- *
- * Returns:
- * Zero on success, negative error code on failure.
- */
-int tinydrm_resume(struct tinydrm_device *tdev)
-{
-	struct drm_atomic_state *state = tdev->suspend_state;
-	int ret;
-
-	if (!state) {
-		DRM_ERROR("Failed to resume: state is not set\n");
-		return -EINVAL;
-	}
-
-	tdev->suspend_state = NULL;
-
-	ret = drm_atomic_helper_resume(tdev->drm, state);
-	if (ret) {
-		DRM_ERROR("Error resuming state: %d\n", ret);
-		return ret;
-	}
-
-	drm_fbdev_cma_set_suspend_unlocked(tdev->fbdev_cma, 0);
-
-	return 0;
-}
-EXPORT_SYMBOL(tinydrm_resume);
-
 MODULE_LICENSE("GPL");

drivers/gpu/drm/tinydrm/mi0283qt.c

@@ -9,6 +9,7 @@
  * (at your option) any later version.
  */
 
+#include <drm/drm_modeset_helper.h>
 #include <drm/tinydrm/ili9341.h>
 #include <drm/tinydrm/mipi-dbi.h>
 #include <drm/tinydrm/tinydrm-helpers.h>
@@ -231,7 +232,7 @@ static int __maybe_unused mi0283qt_pm_suspend(struct device *dev)
 	struct mipi_dbi *mipi = dev_get_drvdata(dev);
 	int ret;
 
-	ret = tinydrm_suspend(&mipi->tinydrm);
+	ret = drm_mode_config_helper_suspend(mipi->tinydrm.drm);
 	if (ret)
 		return ret;
 
@@ -249,7 +250,9 @@ static int __maybe_unused mi0283qt_pm_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	return tinydrm_resume(&mipi->tinydrm);
+	drm_mode_config_helper_resume(mipi->tinydrm.drm);
+
+	return 0;
 }
 
 static const struct dev_pm_ops mi0283qt_pm_ops = {

drivers/gpu/drm/tinydrm/mipi-dbi.c

@@ -154,8 +154,18 @@ int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t len)
 }
 EXPORT_SYMBOL(mipi_dbi_command_buf);
 
-static int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
-				struct drm_clip_rect *clip, bool swap)
+/**
+ * mipi_dbi_buf_copy - Copy a framebuffer, transforming it if necessary
+ * @dst: The destination buffer
+ * @fb: The source framebuffer
+ * @clip: Clipping rectangle of the area to be copied
+ * @swap: When true, swap MSB/LSB of 16-bit values
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
+		      struct drm_clip_rect *clip, bool swap)
 {
 	struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
 	struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
@@ -192,6 +202,7 @@ static int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
 					     DMA_FROM_DEVICE);
 	return ret;
 }
+EXPORT_SYMBOL(mipi_dbi_buf_copy);
 
 static int mipi_dbi_fb_dirty(struct drm_framebuffer *fb,
 			     struct drm_file *file_priv,
@@ -444,18 +455,23 @@ EXPORT_SYMBOL(mipi_dbi_display_is_on);
 
 #if IS_ENABLED(CONFIG_SPI)
 
-/*
+/**
+ * mipi_dbi_spi_cmd_max_speed - get the maximum SPI bus speed
+ * @spi: SPI device
+ * @len: The transfer buffer length.
+ *
  * Many controllers have a max speed of 10MHz, but can be pushed way beyond
  * that. Increase reliability by running pixel data at max speed and the rest
  * at 10MHz, preventing transfer glitches from messing up the init settings.
  */
-static u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len)
+u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len)
 {
 	if (len > 64)
 		return 0; /* use default */
 
 	return min_t(u32, 10000000, spi->max_speed_hz);
 }
+EXPORT_SYMBOL(mipi_dbi_spi_cmd_max_speed);
 
 /*
  * MIPI DBI Type C Option 1

drivers/video/fbdev/Kconfig

@@ -772,6 +772,7 @@ config FB_VESA
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
 	depends on (FB = y) && !IA64 && EFI
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT

drivers/video/fbdev/core/Makefile

@@ -15,9 +15,6 @@ ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
 fb-y				  += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
 				     fbcon_ccw.o
 endif
-ifeq ($(CONFIG_DMI),y)
-fb-y				  += fbcon_dmi_quirks.o
-endif
 endif
 fb-objs                           := $(fb-y)
 

drivers/video/fbdev/core/fbcon.c

@@ -964,10 +964,13 @@ static const char *fbcon_startup(void)
 	ops->cur_blink_jiffies = HZ / 5;
 	ops->info = info;
 	info->fbcon_par = ops;
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
-		p->con_rotate = fbcon_platform_get_rotate(info);
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate == -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate == -1)
+		p->con_rotate = FB_ROTATE_UR;
+
 	set_blitting_type(vc, info);
 
 	if (info->fix.type != FB_TYPE_TEXT) {
@@ -1104,10 +1107,13 @@ static void fbcon_init(struct vc_data *vc, int init)
 
 	ops = info->fbcon_par;
 	ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
-		p->con_rotate = fbcon_platform_get_rotate(info);
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate == -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate == -1)
+		p->con_rotate = FB_ROTATE_UR;
+
 	set_blitting_type(vc, info);
 
 	cols = vc->vc_cols;

drivers/video/fbdev/core/fbcon.h

@@ -262,10 +262,4 @@ extern void fbcon_set_rotate(struct fbcon_ops *ops);
 #define fbcon_set_rotate(x) do {} while(0)
 #endif /* CONFIG_FRAMEBUFFER_CONSOLE_ROTATION */
 
-#ifdef CONFIG_DMI
-int fbcon_platform_get_rotate(struct fb_info *info);
-#else
-#define fbcon_platform_get_rotate(i) FB_ROTATE_UR
-#endif /* CONFIG_DMI */
-
 #endif /* _VIDEO_FBCON_H */

drivers/video/fbdev/core/fbsysfs.c

@@ -58,6 +58,7 @@ struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
 		info->par = p + fb_info_size;
 
 	info->device = dev;
+	info->fbcon_rotate_hint = -1;
 
 #ifdef CONFIG_FB_BACKLIGHT
 	mutex_init(&info->bl_curve_mutex);

include/drm/drm_modeset_helper.h

@@ -34,4 +34,7 @@ void drm_helper_mode_fill_fb_struct(struct drm_device *dev,
 int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
 		  const struct drm_crtc_funcs *funcs);
 
+int drm_mode_config_helper_suspend(struct drm_device *dev);
+int drm_mode_config_helper_resume(struct drm_device *dev);
+
 #endif