ARM: dts: Revert am335x mcasp ti-sysc changes

Without this McASP FIFO would constantly underflow. EDMA
test via dmatest works though.

Let's revert the change for now until we know the root cause.
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -1056,19 +1056,7 @@ target-module@38000 {			/* 0x48038000, ap 16 02.0 */
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x38000 0x2000>;
-
-			mcasp0: mcasp@0 {
-				compatible = "ti,am33xx-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x46000000 0x400000>;
-				reg-names = "mpu", "dat";
-				interrupts = <80>, <81>;
-				interrupt-names = "tx", "rx";
-				status = "disabled";
-				dmas = <&edma 8 2>,
-					<&edma 9 2>;
-				dma-names = "tx", "rx";
-			};
+			status = "disabled";
 		};
 
 		target-module@3c000 {			/* 0x4803c000, ap 20 32.0 */
@@ -1086,19 +1074,7 @@ target-module@3c000 {			/* 0x4803c000, ap 20 32.0 */
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x3c000 0x2000>;
-
-			mcasp1: mcasp@0 {
-				compatible = "ti,am33xx-mcasp-audio";
-				reg = <0x0 0x2000>,
-				      <0x46400000 0x400000>;
-				reg-names = "mpu", "dat";
-				interrupts = <82>, <83>;
-				interrupt-names = "tx", "rx";
-				status = "disabled";
-				dmas = <&edma 10 2>,
-					<&edma 11 2>;
-				dma-names = "tx", "rx";
-			};
+			status = "disabled";
 		};
 
 		target-module@40000 {			/* 0x48040000, ap 22 1e.0 */

arch/arm/boot/dts/am33xx.dtsi

@@ -440,7 +440,36 @@ aes: aes@53500000 {
 			       <&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8 2>,
+				<&edma 9 2>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803c000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10 2>,
+				<&edma 11 2>;
+			dma-names = "tx", "rx";
+		};
 	};
+
 };
 
 #include "am33xx-l4.dtsi"