Commit 5d67c1c5 authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

bnx2x: Correct speed from baseT into KR.

ethtool shows KR supported/advertised speeds incorrectly as baseT
in cases the board is in fact KR-base.
Signed-off-by: default avatarYaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1359d73c
......@@ -257,14 +257,15 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bnx2x *bp = netdev_priv(dev);
int cfg_idx = bnx2x_get_link_cfg_idx(bp);
u32 media_type;
/* Dual Media boards present all available port types */
cmd->supported = bp->port.supported[cfg_idx] |
(bp->port.supported[cfg_idx ^ 1] &
(SUPPORTED_TP | SUPPORTED_FIBRE));
cmd->advertising = bp->port.advertising[cfg_idx];
if (bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type ==
ETH_PHY_SFP_1G_FIBER) {
media_type = bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type;
if (media_type == ETH_PHY_SFP_1G_FIBER) {
cmd->supported &= ~(SUPPORTED_10000baseT_Full);
cmd->advertising &= ~(ADVERTISED_10000baseT_Full);
}
......@@ -312,12 +313,26 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->lp_advertising |= ADVERTISED_100baseT_Full;
if (status & LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_1000baseT_Half;
if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_1000baseT_Full;
if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE) {
if (media_type == ETH_PHY_KR) {
cmd->lp_advertising |=
ADVERTISED_1000baseKX_Full;
} else {
cmd->lp_advertising |=
ADVERTISED_1000baseT_Full;
}
}
if (status & LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_2500baseX_Full;
if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_10000baseT_Full;
if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE) {
if (media_type == ETH_PHY_KR) {
cmd->lp_advertising |=
ADVERTISED_10000baseKR_Full;
} else {
cmd->lp_advertising |=
ADVERTISED_10000baseT_Full;
}
}
if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_20000baseKR2_Full;
}
......@@ -564,15 +579,20 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
if (!(bp->port.supported[cfg_idx] &
SUPPORTED_1000baseT_Full)) {
if (bp->port.supported[cfg_idx] &
SUPPORTED_1000baseT_Full) {
advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
} else if (bp->port.supported[cfg_idx] &
SUPPORTED_1000baseKX_Full) {
advertising = ADVERTISED_1000baseKX_Full;
} else {
DP(BNX2X_MSG_ETHTOOL,
"1G full not supported\n");
return -EINVAL;
}
advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
break;
case SPEED_2500:
......@@ -600,17 +620,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
phy_idx = bnx2x_get_cur_phy_idx(bp);
if (!(bp->port.supported[cfg_idx]
& SUPPORTED_10000baseT_Full) ||
(bp->link_params.phy[phy_idx].media_type ==
if ((bp->port.supported[cfg_idx] &
SUPPORTED_10000baseT_Full) &&
(bp->link_params.phy[phy_idx].media_type !=
ETH_PHY_SFP_1G_FIBER)) {
advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
} else if (bp->port.supported[cfg_idx] &
SUPPORTED_10000baseKR_Full) {
advertising = (ADVERTISED_10000baseKR_Full |
ADVERTISED_FIBRE);
} else {
DP(BNX2X_MSG_ETHTOOL,
"10G full not supported\n");
return -EINVAL;
}
advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
break;
default:
......
......@@ -11493,7 +11493,9 @@ static const struct bnx2x_phy phy_warpcore = {
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseKX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_20000baseKR2_Full |
SUPPORTED_20000baseMLD2_Full |
SUPPORTED_FIBRE |
......@@ -11999,8 +12001,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
break;
case PORT_HW_CFG_NET_SERDES_IF_KR:
phy->media_type = ETH_PHY_KR;
phy->supported &= (SUPPORTED_1000baseT_Full |
SUPPORTED_10000baseT_Full |
phy->supported &= (SUPPORTED_1000baseKX_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
......@@ -12018,8 +12020,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
phy->media_type = ETH_PHY_KR;
phy->flags |= FLAGS_WC_DUAL_MODE;
phy->supported &= (SUPPORTED_20000baseKR2_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_1000baseKX_Full |
SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
......
......@@ -11143,6 +11143,12 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->port.advertising[idx] |=
(ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
} else if (bp->port.supported[idx] &
SUPPORTED_1000baseKX_Full) {
bp->link_params.req_line_speed[idx] =
SPEED_1000;
bp->port.advertising[idx] |=
ADVERTISED_1000baseKX_Full;
} else {
BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
link_config,
......@@ -11175,6 +11181,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->port.advertising[idx] |=
(ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
} else if (bp->port.supported[idx] &
SUPPORTED_10000baseKR_Full) {
bp->link_params.req_line_speed[idx] =
SPEED_10000;
bp->port.advertising[idx] |=
(ADVERTISED_10000baseKR_Full |
ADVERTISED_FIBRE);
} else {
BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
link_config,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment