Commit 5e018f7e authored by Randy Dunlap's avatar Randy Dunlap Committed by Linus Torvalds

[PATCH] Remove PC9800 support

PC9800 sub-arch is incomplete, hackish (at least in IDE), maintainers don't
reply to emails and haven't touched it in awhile.  Can't even config it to
try to build it without other patches to the kernel tree.

bk-rm-script:

#! /bin/sh
bk rm -r ./arch/i386/mach-pc9800
bk rm -r ./arch/i386/boot98
bk rm ./drivers/char/lp_old98.c
bk rm ./drivers/serial/serial98.c
bk rm ./drivers/scsi/scsi_pc98.c
bk rm ./drivers/scsi/pc980155.c
bk rm ./drivers/scsi/pc980155.h
bk rm ./drivers/block/floppy98.c
bk rm ./drivers/input/keyboard/98kbd.c
bk rm ./drivers/input/serio/98kbd-io.c
bk rm ./drivers/input/misc/98spkr.c
bk rm ./drivers/input/mouse/98busmouse.c
bk rm ./drivers/ide/legacy/pc9800.c
bk rm ./drivers/ide/legacy/hd98.c
bk rm -r ./include/asm-i386/mach-pc9800
bk rm ./include/asm-i386/pc9800_sca.h
bk rm ./include/asm-i386/pc9800.h
bk rm ./fs/partitions/nec98.c
bk rm ./fs/partitions/nec98.h
bk rm ./sound/isa/cs423x/pc98.c
bk rm ./sound/isa/cs423x/pc9801_118_magic.h
bk rm ./sound/isa/cs423x/sound_pc9800.h
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent b429f3b3
...@@ -6,7 +6,7 @@ menu "Block devices" ...@@ -6,7 +6,7 @@ menu "Block devices"
config BLK_DEV_FD config BLK_DEV_FD
tristate "Normal floppy disk support" tristate "Normal floppy disk support"
depends on (!X86_PC9800 && !ARCH_S390 && !M68K && !IA64) || Q40 || (SUN3X && BROKEN) depends on (!ARCH_S390 && !M68K && !IA64) || Q40 || (SUN3X && BROKEN)
---help--- ---help---
If you want to use the floppy disk drive(s) of your PC under Linux, If you want to use the floppy disk drive(s) of your PC under Linux,
say Y. Information about this driver, especially important for IBM say Y. Information about this driver, especially important for IBM
...@@ -26,13 +26,6 @@ config ATARI_FLOPPY ...@@ -26,13 +26,6 @@ config ATARI_FLOPPY
tristate "Atari floppy support" tristate "Atari floppy support"
depends on ATARI depends on ATARI
config BLK_DEV_FD98
tristate "NEC PC-9800 floppy disk support"
depends on X86_PC9800
---help---
If you want to use the floppy disk drive(s) of NEC PC-9801/PC-9821,
say Y.
config BLK_DEV_SWIM_IOP config BLK_DEV_SWIM_IOP
bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)" bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)"
depends on MAC && EXPERIMENTAL && BROKEN depends on MAC && EXPERIMENTAL && BROKEN
......
...@@ -586,17 +586,6 @@ config HVC_CONSOLE ...@@ -586,17 +586,6 @@ config HVC_CONSOLE
console. This driver allows each pSeries partition to have a console console. This driver allows each pSeries partition to have a console
which is accessed via the HMC. which is accessed via the HMC.
config PC9800_OLDLP
tristate "NEC PC-9800 old-style printer port support"
depends on X86_PC9800 && !PARPORT
---help---
If you intend to attach a printer to the parallel port of NEC PC-9801
/PC-9821 with OLD compatibility mode, Say Y.
config PC9800_OLDLP_CONSOLE
bool "Support for console on line printer"
depends on PC9800_OLDLP
config QIC02_TAPE config QIC02_TAPE
tristate "QIC-02 tape support" tristate "QIC-02 tape support"
help help
...@@ -740,7 +729,7 @@ config NVRAM ...@@ -740,7 +729,7 @@ config NVRAM
config RTC config RTC
tristate "Enhanced Real Time Clock Support" tristate "Enhanced Real Time Clock Support"
depends on !PPC32 && !PARISC && !IA64 && !X86_PC9800 && !M68K depends on !PPC32 && !PARISC && !IA64 && !M68K
---help--- ---help---
If you say Y here and create a character special file /dev/rtc with If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you major number 10 and minor number 135 using mknod ("man mknod"), you
...@@ -793,15 +782,6 @@ config EFI_RTC ...@@ -793,15 +782,6 @@ config EFI_RTC
bool "EFI Real Time Clock Services" bool "EFI Real Time Clock Services"
depends on IA64 depends on IA64
config RTC98
tristate "NEC PC-9800 Real Time Clock Support"
depends on X86_PC9800
default y
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
will get access to the real time clock (or hardware clock) built
config H8 config H8
bool "Tadpole ANA H8 Support (OBSOLETE)" bool "Tadpole ANA H8 Support (OBSOLETE)"
depends on OBSOLETE && ALPHA_BOOK1 depends on OBSOLETE && ALPHA_BOOK1
......
...@@ -47,7 +47,6 @@ obj-$(CONFIG_VIOTAPE) += viotape.o ...@@ -47,7 +47,6 @@ obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_PRINTER) += lp.o obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o obj-$(CONFIG_TIPAR) += tipar.o
obj-$(CONFIG_PC9800_OLDLP) += lp_old98.o
obj-$(CONFIG_DTLK) += dtlk.o obj-$(CONFIG_DTLK) += dtlk.o
obj-$(CONFIG_R3964) += n_r3964.o obj-$(CONFIG_R3964) += n_r3964.o
......
...@@ -97,25 +97,7 @@ comment "Please see Documentation/ide.txt for help/info on IDE drives" ...@@ -97,25 +97,7 @@ comment "Please see Documentation/ide.txt for help/info on IDE drives"
config BLK_DEV_HD_IDE config BLK_DEV_HD_IDE
bool "Use old disk-only driver on primary interface" bool "Use old disk-only driver on primary interface"
depends on ((X86 && X86_PC9800!=y) || SH_MPC1211) depends on (X86 || SH_MPC1211)
---help---
There are two drivers for MFM/RLL/IDE disks. Most people use just
the new enhanced driver by itself. This option however installs the
old hard disk driver to control the primary IDE/disk interface in
the system, leaving the new enhanced IDE driver to take care of only
the 2nd/3rd/4th IDE interfaces. Doing this will prevent you from
having an IDE/ATAPI CD-ROM or tape drive connected to the primary
IDE interface. Choosing this option may be useful for older systems
which have MFM/RLL/ESDI controller+drives at the primary port
address (0x1f0), along with IDE drives at the secondary/3rd/4th port
addresses.
Normally, just say N here; you will then use the new driver for all
4 interfaces.
config BLK_DEV_HD_IDE98
bool "Use old disk-only driver on primary interface"
depends on X86 && X86_PC9800
---help--- ---help---
There are two drivers for MFM/RLL/IDE disks. Most people use just There are two drivers for MFM/RLL/IDE disks. Most people use just
the new enhanced driver by itself. This option however installs the the new enhanced driver by itself. This option however installs the
......
...@@ -29,7 +29,6 @@ ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o ...@@ -29,7 +29,6 @@ ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o
# built-in only drivers from legacy/ # built-in only drivers from legacy/
ide-core-$(CONFIG_BLK_DEV_IDE_PC9800) += legacy/pc9800.o
ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o
ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o
ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o
......
...@@ -96,15 +96,3 @@ config KEYBOARD_AMIGA ...@@ -96,15 +96,3 @@ config KEYBOARD_AMIGA
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called amikbd. module will be called amikbd.
config KEYBOARD_98KBD
tristate "NEC PC-9800 Keyboard support"
depends on X86_PC9800 && INPUT && INPUT_KEYBOARD
select SERIO
help
Say Y here if you want to use the NEC PC-9801/PC-9821 keyboard (or
compatible) on your system.
To compile this driver as a module, choose M here: the
module will be called 98kbd.
...@@ -40,10 +40,6 @@ config INPUT_M68K_BEEP ...@@ -40,10 +40,6 @@ config INPUT_M68K_BEEP
tristate "M68k Beeper support" tristate "M68k Beeper support"
depends on M68K && INPUT && INPUT_MISC depends on M68K && INPUT && INPUT_MISC
config INPUT_98SPKR
tristate "PC-9800 Speaker support"
depends on X86_PC9800 && INPUT && INPUT_MISC
config INPUT_UINPUT config INPUT_UINPUT
tristate "User level driver support" tristate "User level driver support"
depends on INPUT && INPUT_MISC depends on INPUT && INPUT_MISC
......
...@@ -130,14 +130,3 @@ config MOUSE_VSXXXAA ...@@ -130,14 +130,3 @@ config MOUSE_VSXXXAA
described in the source file). This driver should, in theory, described in the source file). This driver should, in theory,
also work with the digitizer DEC produced, but it isn't tested also work with the digitizer DEC produced, but it isn't tested
with that (I don't have the hardware yet). with that (I don't have the hardware yet).
config MOUSE_PC9800
tristate "NEC PC-9800 busmouse"
depends on X86_PC9800 && INPUT && INPUT_MOUSE && ISA
help
Say Y here if you have NEC PC-9801/PC-9821 computer and want its
native mouse supported.
To compile this driver as a module, choose M here: the
module will be called 98busmouse.
...@@ -10,7 +10,6 @@ obj-$(CONFIG_MOUSE_INPORT) += inport.o ...@@ -10,7 +10,6 @@ obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
obj-$(CONFIG_MOUSE_PC9800) += 98busmouse.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
......
...@@ -97,16 +97,6 @@ config SERIO_SA1111 ...@@ -97,16 +97,6 @@ config SERIO_SA1111
tristate "Intel SA1111 keyboard controller" tristate "Intel SA1111 keyboard controller"
depends on SA1111 && SERIO depends on SA1111 && SERIO
config SERIO_98KBD
tristate "NEC PC-9800 keyboard controller"
depends on X86_PC9800 && SERIO
help
Say Y here if you have the NEC PC-9801/PC-9821 and want to use its
standard keyboard connected to its keyboard controller.
To compile this driver as a module, choose M here: the
module will be called 98kbd-io.
config SERIO_GSCPS2 config SERIO_GSCPS2
tristate "HP GSC PS/2 keyboard and PS/2 mouse controller" tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
depends on GSC && SERIO depends on GSC && SERIO
......
...@@ -922,7 +922,7 @@ config HP100 ...@@ -922,7 +922,7 @@ config HP100
config NET_ISA config NET_ISA
bool "Other ISA cards" bool "Other ISA cards"
depends on NET_ETHERNET && ISA && !X86_PC9800 depends on NET_ETHERNET && ISA
---help--- ---help---
If your network (Ethernet) card hasn't been mentioned yet and its If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components bus system (that's the way the cards talks to the other components
...@@ -1105,56 +1105,6 @@ config SK_G16 ...@@ -1105,56 +1105,6 @@ config SK_G16
the Ethernet-HOWTO, available from the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. <http://www.tldp.org/docs.html#howto>.
config NET_CBUS
bool "NEC PC-9800 C-bus cards"
depends on NET_ETHERNET && ISA && X86_PC9800
---help---
If your network (Ethernet) card hasn't been mentioned yet and its
bus system (that's the way the cards talks to the other components
of your computer) is NEC PC-9800 C-Bus, say Y.
config NE2K_CBUS
tristate "Most NE2000-based Ethernet support"
depends on NET_CBUS
select CRC32
config NE2K_CBUS_EGY98
bool "Melco EGY-98 support"
depends on NE2K_CBUS
config NE2K_CBUS_LGY98
bool "Melco LGY-98 support"
depends on NE2K_CBUS
config NE2K_CBUS_ICM
bool "ICM IF-27xxET support"
depends on NE2K_CBUS
config NE2K_CBUS_IOLA98
bool "I-O DATA LA-98 support"
depends on NE2K_CBUS
config NE2K_CBUS_CNET98EL
bool "Contec C-NET(98)E/L support"
depends on NE2K_CBUS
config NE2K_CBUS_CNET98EL_IO_BASE
hex "C-NET(98)E/L I/O base address (0xaaed or 0x55ed)"
depends on NE2K_CBUS_CNET98EL
default "0xaaed"
config NE2K_CBUS_ATLA98
bool "Allied Telesis LA-98 Support"
depends on NE2K_CBUS
config NE2K_CBUS_BDN
bool "ELECOM Laneed LD-BDN[123]A Support"
depends on NE2K_CBUS
config NE2K_CBUS_NEC108
bool "NEC PC-9801-108 Support"
depends on NE2K_CBUS
config SKMC config SKMC
tristate "SKnet MCA support" tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA && BROKEN depends on NET_ETHERNET && MCA && BROKEN
......
...@@ -79,7 +79,6 @@ obj-$(CONFIG_ARM_ETHERH) += 8390.o ...@@ -79,7 +79,6 @@ obj-$(CONFIG_ARM_ETHERH) += 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390.o obj-$(CONFIG_EL2) += 3c503.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390.o
obj-$(CONFIG_NE2K_CBUS) += ne2k_cbus.o 8390.o
obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
obj-$(CONFIG_HPLAN) += hp.o 8390.o obj-$(CONFIG_HPLAN) += hp.o 8390.o
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
......
...@@ -1716,18 +1716,6 @@ config SCSI_SUNESP ...@@ -1716,18 +1716,6 @@ config SCSI_SUNESP
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called esp. module will be called esp.
config SCSI_PC980155
tristate "NEC PC-9801-55 SCSI support"
depends on X86_PC9800 && SCSI
help
If you have the NEC PC-9801-55 SCSI interface card or compatibles
for NEC PC-9801/PC-9821, say Y.
config WD33C93_PIO
bool
depends on SCSI_PC980155
default y
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI # bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
config ZFCP config ZFCP
......
...@@ -34,7 +34,6 @@ obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o ...@@ -34,7 +34,6 @@ obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
obj-$(CONFIG_SCSI_PC980155) += pc980155.o wd33c93.o
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
...@@ -142,7 +141,6 @@ scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \ ...@@ -142,7 +141,6 @@ scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
scsi_devinfo.o scsi_devinfo.o
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
scsi_mod-$(CONFIG_X86_PC9800) += scsi_pc98.o
sd_mod-objs := sd.o sd_mod-objs := sd.o
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
......
...@@ -518,19 +518,6 @@ config V850E_UART_CONSOLE ...@@ -518,19 +518,6 @@ config V850E_UART_CONSOLE
depends on V850E_UART depends on V850E_UART
select SERIAL_CORE_CONSOLE select SERIAL_CORE_CONSOLE
config SERIAL98
tristate "PC-9800 8251-based primary serial port support"
depends on X86_PC9800
select SERIAL_CORE
help
If you want to use standard primary serial ports on PC-9800,
say Y. Otherwise, say N.
config SERIAL98_CONSOLE
bool "Support for console on PC-9800 standard serial port"
depends on SERIAL98=y
select SERIAL_CORE_CONSOLE
config SERIAL_SH_SCI config SERIAL_SH_SCI
tristate "SH SCI(F) serial port support" tristate "SH SCI(F) serial port support"
depends on SUPERH || H8300 depends on SUPERH || H8300
......
...@@ -33,7 +33,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o ...@@ -33,7 +33,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o obj-$(CONFIG_SERIAL_68360) += 68360serial.o
obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_V850E_UART) += v850e_uart.o obj-$(CONFIG_V850E_UART) += v850e_uart.o
obj-$(CONFIG_SERIAL98) += serial98.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
obj-$(CONFIG_SERIAL_DZ) += dz.o obj-$(CONFIG_SERIAL_DZ) += dz.o
......
...@@ -187,13 +187,6 @@ config LDM_DEBUG ...@@ -187,13 +187,6 @@ config LDM_DEBUG
If unsure, say N. If unsure, say N.
config NEC98_PARTITION
bool "NEC PC-9800 partition table support" if PARTITION_ADVANCED
default y if !PARTITION_ADVANCED && X86_PC9800
help
Say Y here if you would like to be able to read the hard disk
partition table format used by NEC PC-9800 machines.
config SGI_PARTITION config SGI_PARTITION
bool "SGI partition support" if PARTITION_ADVANCED bool "SGI partition support" if PARTITION_ADVANCED
default y if !PARTITION_ADVANCED && (SGI_IP22 || SGI_IP27) default y if !PARTITION_ADVANCED && (SGI_IP22 || SGI_IP27)
......
...@@ -29,7 +29,6 @@ ...@@ -29,7 +29,6 @@
#include "ldm.h" #include "ldm.h"
#include "mac.h" #include "mac.h"
#include "msdos.h" #include "msdos.h"
#include "nec98.h"
#include "osf.h" #include "osf.h"
#include "sgi.h" #include "sgi.h"
#include "sun.h" #include "sun.h"
......
...@@ -51,16 +51,6 @@ config SND_CS4236 ...@@ -51,16 +51,6 @@ config SND_CS4236
Say 'Y' or 'M' to include support for CS4235,CS4236,CS4237B,CS4238B,CS4239 Say 'Y' or 'M' to include support for CS4235,CS4236,CS4237B,CS4238B,CS4239
chips from Cirrus Logic - Crystal Semiconductors. chips from Cirrus Logic - Crystal Semiconductors.
config SND_PC98_CS4232
tristate "NEC PC9800 CS4232 driver"
depends on SND && X86_PC9800
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
help
Say 'Y' or 'M' to include support for NEC PC-9801/PC-9821 on-board
soundchip based on CS4232.
config SND_ES968 config SND_ES968
tristate "Generic ESS ES968 driver" tristate "Generic ESS ES968 driver"
depends on SND && ISAPNP depends on SND && ISAPNP
......
...@@ -8,7 +8,6 @@ snd-cs4236-lib-objs := cs4236_lib.o ...@@ -8,7 +8,6 @@ snd-cs4236-lib-objs := cs4236_lib.o
snd-cs4231-objs := cs4231.o snd-cs4231-objs := cs4231.o
snd-cs4232-objs := cs4232.o snd-cs4232-objs := cs4232.o
snd-cs4236-objs := cs4236.o snd-cs4236-objs := cs4236.o
snd-pc98-cs4232-objs := pc98.o
# Toplevel Module Dependency # Toplevel Module Dependency
obj-$(CONFIG_SND_AZT2320) += snd-cs4231-lib.o obj-$(CONFIG_SND_AZT2320) += snd-cs4231-lib.o
...@@ -22,6 +21,5 @@ obj-$(CONFIG_SND_INTERWAVE_STB) += snd-cs4231-lib.o ...@@ -22,6 +21,5 @@ obj-$(CONFIG_SND_INTERWAVE_STB) += snd-cs4231-lib.o
obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-cs4231-lib.o obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-cs4231-lib.o
obj-$(CONFIG_SND_WAVEFRONT) += snd-cs4231-lib.o obj-$(CONFIG_SND_WAVEFRONT) += snd-cs4231-lib.o
obj-$(CONFIG_SND_SSCAPE) += snd-cs4231-lib.o obj-$(CONFIG_SND_SSCAPE) += snd-cs4231-lib.o
obj-$(CONFIG_SND_PC98_CS4232) += snd-pc98-cs4232.o snd-cs4231-lib.o
obj-m := $(sort $(obj-m)) obj-m := $(sort $(obj-m))
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment