Staging: winbond: mds_s.h coding style fixes.

I fixed all problems reported by checkpatch.pl except some
long lines.
Signed-off-by: Lars Lindley <lindley@coyote.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/winbond/mds_s.h

@@ -15,122 +15,121 @@ enum {
 	WLAN_PREAMBLE_TYPE_LONG,
 };
 
-////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define MAX_USB_TX_DESCRIPTOR		15		// IS89C35 ability
-#define MAX_USB_TX_BUFFER_NUMBER	4		// Virtual pre-buffer number of MAX_USB_TX_BUFFER
-#define MAX_USB_TX_BUFFER			4096	// IS89C35 ability 4n alignment is required for hardware
+/*****************************************************************************/
+#define MAX_USB_TX_DESCRIPTOR		15	/* IS89C35 ability */
+#define MAX_USB_TX_BUFFER_NUMBER	4	/* Virtual pre-buffer number of MAX_USB_TX_BUFFER */
+#define MAX_USB_TX_BUFFER		4096	/* IS89C35 ability 4n alignment is required for hardware */
 
-#define AUTH_REQUEST_PAIRWISE_ERROR			0		// _F flag setting
-#define AUTH_REQUEST_GROUP_ERROR			1		// _F flag setting
+#define AUTH_REQUEST_PAIRWISE_ERROR	0	/* _F flag setting */
+#define AUTH_REQUEST_GROUP_ERROR	1	/* _F flag setting */
 
-#define CURRENT_FRAGMENT_THRESHOLD		(adapter->Mds.TxFragmentThreshold & ~0x1)
-#define CURRENT_PREAMBLE_MODE			psLOCAL->boShortPreamble?WLAN_PREAMBLE_TYPE_SHORT:WLAN_PREAMBLE_TYPE_LONG
-#define CURRENT_TX_RATE_FOR_MNG			adapter->sLocalPara.CurrentTxRateForMng
-#define CURRENT_PROTECT_MECHANISM		psLOCAL->boProtectMechanism
-#define CURRENT_RTS_THRESHOLD			adapter->Mds.TxRTSThreshold
+#define CURRENT_FRAGMENT_THRESHOLD	(adapter->Mds.TxFragmentThreshold & ~0x1)
+#define CURRENT_PREAMBLE_MODE		(psLOCAL->boShortPreamble ? WLAN_PREAMBLE_TYPE_SHORT : WLAN_PREAMBLE_TYPE_LONG)
+#define CURRENT_TX_RATE_FOR_MNG		(adapter->sLocalPara.CurrentTxRateForMng)
+#define CURRENT_PROTECT_MECHANISM	(psLOCAL->boProtectMechanism)
+#define CURRENT_RTS_THRESHOLD		(adapter->Mds.TxRTSThreshold)
 
-#define MIB_GS_XMIT_OK_INC				adapter->sLocalPara.GS_XMIT_OK++
-#define MIB_GS_RCV_OK_INC				adapter->sLocalPara.GS_RCV_OK++
-#define MIB_GS_XMIT_ERROR_INC			adapter->sLocalPara.GS_XMIT_ERROR
+#define MIB_GS_XMIT_OK_INC		(adapter->sLocalPara.GS_XMIT_OK++)
+#define MIB_GS_RCV_OK_INC		(adapter->sLocalPara.GS_RCV_OK++)
+#define MIB_GS_XMIT_ERROR_INC		(adapter->sLocalPara.GS_XMIT_ERROR)
 
-//---------- TX -----------------------------------
+/* ---------- TX ----------------------------------- */
 #define ETHERNET_TX_DESCRIPTORS         MAX_USB_TX_BUFFER_NUMBER
 
-//---------- RX ------------------------------------
-#define ETHERNET_RX_DESCRIPTORS			8	//It's not necessary to allocate more than 2 in sync indicate
-
-//================================================================
-// Configration default value
-//================================================================
-#define DEFAULT_MULTICASTLISTMAX		32 		// standard
-#define DEFAULT_TX_BURSTLENGTH			3 		// 32 Longwords
-#define DEFAULT_RX_BURSTLENGTH			3 		// 32 Longwords
-#define DEFAULT_TX_THRESHOLD			0 		// Full Packet
-#define DEFAULT_RX_THRESHOLD			0 		// Full Packet
-#define DEFAULT_MAXTXRATE				6 		// 11 Mbps (Long)
-#define DEFAULT_CHANNEL					3 		// Chennel 3
-#define DEFAULT_RTSThreshold			2347 	// Disable RTS
-//#define DEFAULT_PME						1 		// Enable
-#define DEFAULT_PME						0 		// Disable
-#define DEFAULT_SIFSTIME				10
-#define DEFAULT_ACKTIME_1ML             304     // 148+44+112 911220 by LCC
-#define DEFAULT_ACKTIME_2ML             248     // 148+44+56 911220 by LCC
-#define DEFAULT_FRAGMENT_THRESHOLD      2346 	// No fragment
-#define DEFAULT_PREAMBLE_LENGTH			72
+/* ---------- RX ----------------------------------- */
+#define ETHERNET_RX_DESCRIPTORS		8	/* It's not necessary to allocate more than 2 in sync indicate */
+
+/*
+ * ================================================================
+ * Configration default value
+ * ================================================================
+ */
+#define DEFAULT_MULTICASTLISTMAX	32	/* standard */
+#define DEFAULT_TX_BURSTLENGTH		3	/* 32 Longwords */
+#define DEFAULT_RX_BURSTLENGTH		3	/* 32 Longwords */
+#define DEFAULT_TX_THRESHOLD		0	/* Full Packet */
+#define DEFAULT_RX_THRESHOLD		0	/* Full Packet */
+#define DEFAULT_MAXTXRATE		6	/* 11 Mbps (Long) */
+#define DEFAULT_CHANNEL			3	/* Chennel 3 */
+#define DEFAULT_RTSThreshold		2347	/* Disable RTS */
+#define DEFAULT_PME			0	/* Disable */
+#define DEFAULT_SIFSTIME		10
+#define DEFAULT_ACKTIME_1ML             304	/* 148 + 44 + 112 */
+#define DEFAULT_ACKTIME_2ML             248	/* 148 + 44 + 56 */
+#define DEFAULT_FRAGMENT_THRESHOLD      2346	/* No fragment */
+#define DEFAULT_PREAMBLE_LENGTH		72
 #define DEFAULT_PLCPHEADERTIME_LENGTH	24
 
-/*------------------------------------------------------------------------
- 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns
- instead of 960 ns. This shall be fixed in the future W89C32
- -------------------------------------------------------------------------*/
-#define DEFAULT_MAX_RECEIVE_TIME        16440000
+/*
+ * ------------------------------------------------------------------------
+ * 0.96 sec since time unit of the R03 for the current, W89C32 is about 60ns
+ * instead of 960 ns. This shall be fixed in the future W89C32
+ * -------------------------------------------------------------------------
+ */
+#define DEFAULT_MAX_RECEIVE_TIME	16440000
 
-#define RX_BUF_SIZE						2352        // 600 	// For 301 must be multiple of 8
-#define MAX_RX_DESCRIPTORS              18         // Rx Layer 2
+#define RX_BUF_SIZE			2352	/* 600 - For 301 must be multiple of 8 */
+#define MAX_RX_DESCRIPTORS		18	/* Rx Layer 2 */
 
+/* For brand-new rx system */
+#define MDS_ID_IGNORE			ETHERNET_RX_DESCRIPTORS
 
-// For brand-new rx system
-#define MDS_ID_IGNORE				ETHERNET_RX_DESCRIPTORS
-
-// For Tx Packet status classify
-#define PACKET_FREE_TO_USE						0
-#define PACKET_COME_FROM_NDIS					0x08
-#define PACKET_COME_FROM_MLME					0x80
-#define PACKET_SEND_COMPLETE					0xff
+/* For Tx Packet status classify */
+#define PACKET_FREE_TO_USE		0
+#define PACKET_COME_FROM_NDIS		0x08
+#define PACKET_COME_FROM_MLME		0x80
+#define PACKET_SEND_COMPLETE		0xff
 
 struct wb35_mds {
-	// For Tx usage
-	u8	TxOwner[ ((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03) ];
+	/* For Tx usage */
+	u8	TxOwner[((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03)];
 	u8	*pTxBuffer;
-	u16	TxBufferSize[ ((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01) ];
-	u8	TxDesFrom[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ];//931130.4.u // 1: MLME 2: NDIS control 3: NDIS data
-	u8	TxCountInBuffer[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ]; // 20060928
+	u16	TxBufferSize[((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01)];
+	u8	TxDesFrom[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];/* 1: MLME 2: NDIS control 3: NDIS data */
+	u8	TxCountInBuffer[((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03)];
 
-	u8	TxFillIndex;//the next index of TxBuffer can be used
-	u8	TxDesIndex;//The next index of TxDes can be used
-	u8	ScanTxPause;	//data Tx pause because the scanning is progressing, but probe request Tx won't.
-	u8	TxPause;//For pause the Mds_Tx modult
+	u8	TxFillIndex;	/* the next index of TxBuffer can be used */
+	u8	TxDesIndex;	/* The next index of TxDes can be used */
+	u8	ScanTxPause;	/* data Tx pause because the scanning is progressing, but probe request Tx won't. */
+	u8	TxPause;	/*For pause the Mds_Tx modult */
 
-	atomic_t	TxThreadCount;//For thread counting 931130.4.v
-//950301 delete due to HW
-//	atomic_t	TxConcurrentCount;//931130.4.w
+	atomic_t	TxThreadCount;	/* For thread counting */
 
-	u16	TxResult[ ((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01) ];//Collect the sending result of Mpdu
+	u16	TxResult[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)];/* Collect the sending result of Mpdu */
 
-	u8	MicRedundant[8]; // For tmp use
-	u8	*MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment
+	u8	MicRedundant[8]; /* For tmp use */
+	u8	*MicWriteAddress[2]; /* The start address to fill the Mic, use 2 point due to Mic maybe fragment */
 
-	u16	MicWriteSize[2]; //931130.4.x
+	u16	MicWriteSize[2];
 
-	u16	MicAdd; // If want to add the Mic, this variable equal to 8
-	u16	MicWriteIndex;//The number of MicWriteAddress 931130.4.y
+	u16	MicAdd; /* If want to add the Mic, this variable equal to 8 */
+	u16	MicWriteIndex; /* The number of MicWriteAddress */
 
-	u8	TxRate[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ][2]; // [0] current tx rate, [1] fall back rate
-	u8	TxInfo[ ((MAX_USB_TX_DESCRIPTOR+1)&~0x01) ];	//Store information for callback function
+	u8	TxRate[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)][2]; /* [0] current tx rate, [1] fall back rate */
+	u8	TxInfo[((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01)]; /*Store information for callback function */
 
-	//WKCHEN added for scanning mechanism
-	u8	TxToggle;		//It is TRUE if there are tx activities in some time interval
+	/* for scanning mechanism */
+	u8	TxToggle;	/* It is TRUE if there are tx activities in some time interval */
 	u8	Reserved_[3];
 
-	//---------- for Tx Parameter
-	u16	TxFragmentThreshold;    	// For frame body only
+	/* ---- for Tx Parameter */
+	u16	TxFragmentThreshold;	/* For frame body only */
 	u16	TxRTSThreshold;
 
-	u32		MaxReceiveTime;//911220.3 Add
-
-	// depend on OS,
-	u32					MulticastListNo;
-	u32					PacketFilter; // Setting by NDIS, the current packet filter in use.
-	u8					MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH];
+	u32	MaxReceiveTime;
 
-	//COUNTERMEASURE
-	u8		bMICfailCount;
-	u8		boCounterMeasureBlock;
-	u8		reserved_4[2];
+	/* depend on OS, */
+	u32	MulticastListNo;
+	u32	PacketFilter; /* Setting by NDIS, the current packet filter in use. */
+	u8	MulticastAddressesArray[DEFAULT_MULTICASTLISTMAX][MAC_ADDR_LENGTH];
 
-	u32	TxTsc; // 20060214
-	u32	TxTsc_2; // 20060214
+	/* COUNTERMEASURE */
+	u8	bMICfailCount;
+	u8	boCounterMeasureBlock;
+	u8	reserved_4[2];
 
+	u32	TxTsc;
+	u32	TxTsc_2;
 };
 
 #endif