ARM: dts: bugfix tqma7 soft reset issue

Running reboot command on the TQMa7 board would just hang infinite
at the end of the system shutdown process.

Handling of i.MX7 errata e10574:
Watchdog: A watchdog timeout or software trigger will not reset the SOC.

Moved pinctrl from common mba7 to common tqma7 dtsi as it improves
readability of errata handling. Most integrators of this SoM will
likely use the development board as inspiration for handling this
SoC issue.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx7-mba7.dtsi

@@ -472,12 +472,6 @@ MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
 			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
 		>;
 	};
-
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
-	};
 };
 
 &pwm1 {
@@ -554,8 +548,3 @@ &usdhc1 {
 	no-1-8-v;
 	status = "okay";
 };
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-};

arch/arm/boot/dts/imx7-tqma7.dtsi

@@ -209,6 +209,14 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
 	};
 };
 
+&iomuxc_lpsr {
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
+		>;
+	};
+};
+
 &sdma {
 	status = "okay";
 };
@@ -228,5 +236,14 @@ &usdhc3 {
 };
 
 &wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/*
+	 * Errata e10574:
+	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
+	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
+	 * TQMa7 on X1-22 (RESET_IN#).
+	 */
+	fsl,ext-reset-output;
 	status = "okay";
 };