Commit 5eaedf31 authored by Claudiu Manoil's avatar Claudiu Manoil Committed by David S. Miller

gianfar: Add backwards compatible Single Queue mode polling

Older Single Queue (SQ_SG_MODE) devices like TSEC (i.e. mpc83xx)
don't feature the frame receive indication bits (RXF) in RSTAT.
For these and for the rest of the SQ_SG_MODE devices, provide the
appropiate polling routine that handles a single pair of Rx/Tx
BD rings, removing the overhead incurred by the multiple queues/
multiple interrupt group devices (veTSEC/ eTSEC2.0 devices).
So this is primarily a fix for the TSEC devices.
Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6602041b
......@@ -128,6 +128,7 @@ static void gfar_set_multi(struct net_device *dev);
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
static void gfar_configure_serdes(struct net_device *dev);
static int gfar_poll(struct napi_struct *napi, int budget);
static int gfar_poll_sq(struct napi_struct *napi, int budget);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void gfar_netpoll(struct net_device *dev);
#endif
......@@ -1038,9 +1039,13 @@ static int gfar_probe(struct platform_device *ofdev)
dev->ethtool_ops = &gfar_ethtool_ops;
/* Register for napi ...We are registering NAPI for each grp */
for (i = 0; i < priv->num_grps; i++)
netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll,
if (priv->mode == SQ_SG_MODE)
netif_napi_add(dev, &priv->gfargrp[0].napi, gfar_poll_sq,
GFAR_DEV_WEIGHT);
else
for (i = 0; i < priv->num_grps; i++)
netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll,
GFAR_DEV_WEIGHT);
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
......@@ -2823,6 +2828,48 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
return howmany;
}
static int gfar_poll_sq(struct napi_struct *napi, int budget)
{
struct gfar_priv_grp *gfargrp =
container_of(napi, struct gfar_priv_grp, napi);
struct gfar __iomem *regs = gfargrp->regs;
struct gfar_priv_tx_q *tx_queue = gfargrp->priv->tx_queue[0];
struct gfar_priv_rx_q *rx_queue = gfargrp->priv->rx_queue[0];
int work_done = 0;
/* Clear IEVENT, so interrupts aren't called again
* because of the packets that have already arrived
*/
gfar_write(&regs->ievent, IEVENT_RTX_MASK);
/* run Tx cleanup to completion */
if (tx_queue->tx_skbuff[tx_queue->skb_dirtytx])
gfar_clean_tx_ring(tx_queue);
work_done = gfar_clean_rx_ring(rx_queue, budget);
if (work_done < budget) {
napi_complete(napi);
/* Clear the halt bit in RSTAT */
gfar_write(&regs->rstat, gfargrp->rstat);
gfar_write(&regs->imask, IMASK_DEFAULT);
/* If we are coalescing interrupts, update the timer
* Otherwise, clear it
*/
gfar_write(&regs->txic, 0);
if (likely(tx_queue->txcoalescing))
gfar_write(&regs->txic, tx_queue->txic);
gfar_write(&regs->rxic, 0);
if (unlikely(rx_queue->rxcoalescing))
gfar_write(&regs->rxic, rx_queue->rxic);
}
return work_done;
}
static int gfar_poll(struct napi_struct *napi, int budget)
{
struct gfar_priv_grp *gfargrp =
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment