Skip to content

L
linux
Commit 5ee35ea7 authored by Juston Li's avatar Juston Li Committed by Greg Kroah-Hartman
Browse files
Options

staging: sm750fb: fix c99 comments 

fixed all checkpatch.pl ERROR: do not use C99 // comments

Any C99 comments used to comment out code are simply removed.
Also some of the errors occur inside '#if 0' blocks which I
might as well fix since checkpatch.pl caught them but the blocks
themselves should probably be cleaned up later.

Changes since v1: close a comment block
Signed-off-by: default avatarJuston Li <juston.h.li@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c40753b5
Hide whitespace changes
Inline Side-by-side
Showing with 41 additions and 92 deletions
drivers/staging/sm750fb/ddk750_chip.c
View file @ 5ee35ea7
......@@ -17,7 +17,7 @@ logical_chip_type_t getChipType(void)
char physicalRev;
logical_chip_type_t chip;
physicalID = devId750;//either 0x718 or 0x750
physicalID = devId750; /* either 0x718 or 0x750 */
physicalRev = revId750;
if (physicalID == 0x718)
......@@ -257,7 +257,7 @@ int ddk750_initHw(initchip_param_t *pInitParam)
unsigned int ulReg;
#if 0
//move the code to map regiter function.
/* move the code to map regiter function. */
if (getChipType() == SM718) {
/* turn on big endian bit*/
ulReg = PEEK32(0x74);
......@@ -487,8 +487,6 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
}
}
}
//printk("Finally: pll->n[%lu],m[%lu],od[%lu],pod[%lu]\n",pll->N,pll->M,pll->OD,pll->POD);
return ret;
}
......@@ -580,14 +578,9 @@ pll_value_t *pPLL /* Structure to hold the value to be set in PLL */
}
/* Restore input frequency from Khz to hz unit */
// pPLL->inputFreq *= 1000;
ulRequestClk *= 1000;
pPLL->inputFreq = DEFAULT_INPUT_CLOCK; /* Default reference clock */
/* Output debug information */
//DDKDEBUGPRINT((DISPLAY_LEVEL, "calcPllValue: Requested Frequency = %d\n", ulRequestClk));
//DDKDEBUGPRINT((DISPLAY_LEVEL, "calcPllValue: Input CLK = %dHz, M=%d, N=%d, OD=%d, POD=%d\n", pPLL->inputFreq, pPLL->M, pPLL->N, pPLL->OD, pPLL->POD));
/* Return actual frequency that the PLL can set */
ret = calcPLL(pPLL);
return ret;
......
drivers/staging/sm750fb/ddk750_dvi.c
View file @ 5ee35ea7
......@@ -51,7 +51,7 @@ int dviInit(
vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
pllFilterEnable, pllFilterValue);
}
return -1;//error
return -1; /* error */
}
......@@ -66,7 +66,6 @@ unsigned short dviGetVendorID(void)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
//pCurrentDviCtrl = getDviCtrl();
pCurrentDviCtrl = g_dcftSupportedDviController;
if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
return pCurrentDviCtrl->pfnGetVendorId();
......@@ -86,7 +85,6 @@ unsigned short dviGetDeviceID(void)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
// pCurrentDviCtrl = getDviCtrl();
pCurrentDviCtrl = g_dcftSupportedDviController;
if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
return pCurrentDviCtrl->pfnGetDeviceId();
......
drivers/staging/sm750fb/ddk750_help.c
View file @ 5ee35ea7
//#include "ddk750_reg.h"
//#include "ddk750_chip.h"
#include "ddk750_help.h"
void __iomem * mmio750 = NULL;
......
drivers/staging/sm750fb/ddk750_sii164.c
View file @ 5ee35ea7
......@@ -125,10 +125,7 @@ long sii164InitChip(
unsigned char pllFilterValue
)
{
//unsigned char ucRegIndex, ucRegValue;
//unsigned char ucDeviceAddress,
unsigned char config;
//unsigned long delayCount;
/* Initialize the i2c bus */
#ifdef USE_HW_I2C
......@@ -141,10 +138,6 @@ long sii164InitChip(
/* Check if SII164 Chip exists */
if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID))
{
#ifdef DDKDEBUG
//sii164PrintRegisterValues();
#endif
/*
* Initialize SII164 controller chip.
*/
......@@ -241,10 +234,6 @@ long sii164InitChip(
config |= SII164_CONFIGURATION_POWER_NORMAL;
i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
#ifdef DDKDEBUG
//sii164PrintRegisterValues();
#endif
return 0;
}
......
drivers/staging/sm750fb/sm750.h
View file @ 5ee35ea7
......@@ -7,8 +7,6 @@
/* please use revision id to distinguish sm750le and sm750*/
#define SPC_SM750 0
//#define SPC_SM750LE 8
#define MB(x) ((x)<<20)
#define MHZ(x) ((x) * 1000000)
/* align should be 2,4,8,16 */
......@@ -95,10 +93,10 @@ struct lynx_cursor{
};
struct lynxfb_crtc{
unsigned char __iomem * vCursor;//virtual address of cursor
unsigned char __iomem * vScreen;//virtual address of on_screen
int oCursor;//cursor address offset in vidmem
int oScreen;//onscreen address offset in vidmem
unsigned char __iomem * vCursor; /* virtual address of cursor */
unsigned char __iomem * vScreen; /* virtual address of on_screen */
int oCursor; /* cursor address offset in vidmem */
int oScreen; /* onscreen address offset in vidmem */
int channel;/* which channel this crtc stands for*/
resource_size_t vidmem_size;/* this view's video memory max size */
......
drivers/staging/sm750fb/sm750_accel.c
View file @ 5ee35ea7
......@@ -57,10 +57,10 @@ void hw_de_init(struct lynx_accel * accel)
write_dpr(accel, DE_STRETCH_FORMAT, (read_dpr(accel, DE_STRETCH_FORMAT) & clr) | reg);
/* disable clipping and transparent */
write_dpr(accel, DE_CLIP_TL, 0);//dpr2c
write_dpr(accel, DE_CLIP_BR, 0);//dpr30
write_dpr(accel, DE_CLIP_TL, 0); /* dpr2c */
write_dpr(accel, DE_CLIP_BR, 0); /* dpr30 */
write_dpr(accel, DE_COLOR_COMPARE_MASK, 0);//dpr24
write_dpr(accel, DE_COLOR_COMPARE_MASK, 0); /* dpr24 */
write_dpr(accel, DE_COLOR_COMPARE, 0);
reg = FIELD_SET(0, DE_CONTROL, TRANSPARENCY, DISABLE)|
......@@ -104,25 +104,25 @@ int hw_fillrect(struct lynx_accel * accel,
return -1;
}
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, base);//dpr40
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, base); /* dpr40 */
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, pitch/Bpp)|
FIELD_VALUE(0, DE_PITCH, SOURCE, pitch/Bpp));//dpr10
FIELD_VALUE(0, DE_PITCH, SOURCE, pitch/Bpp)); /* dpr10 */
write_dpr(accel, DE_WINDOW_WIDTH,
FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, pitch/Bpp)|
FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, pitch/Bpp));//dpr44
FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, pitch/Bpp)); /* dpr44 */
write_dpr(accel, DE_FOREGROUND, color);//DPR14
write_dpr(accel, DE_FOREGROUND, color); /* DPR14 */
write_dpr(accel, DE_DESTINATION,
FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE)|
FIELD_VALUE(0, DE_DESTINATION, X, x)|
FIELD_VALUE(0, DE_DESTINATION, Y, y));//dpr4
FIELD_VALUE(0, DE_DESTINATION, Y, y)); /* dpr4 */
write_dpr(accel, DE_DIMENSION,
FIELD_VALUE(0, DE_DIMENSION, X, width)|
FIELD_VALUE(0, DE_DIMENSION, Y_ET, height));//dpr8
FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr8 */
deCtrl =
FIELD_SET(0, DE_CONTROL, STATUS, START)|
......@@ -130,7 +130,7 @@ int hw_fillrect(struct lynx_accel * accel,
FIELD_SET(0, DE_CONTROL, LAST_PIXEL, ON)|
FIELD_SET(0, DE_CONTROL, COMMAND, RECTANGLE_FILL)|
FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2)|
FIELD_VALUE(0, DE_CONTROL, ROP, rop);//dpr0xc
FIELD_VALUE(0, DE_CONTROL, ROP, rop); /* dpr0xc */
write_dpr(accel, DE_CONTROL, deCtrl);
return 0;
......@@ -236,12 +236,12 @@ unsigned int rop2) /* ROP value */
/* 2D Source Base.
It is an address offset (128 bit aligned) from the beginning of frame buffer.
*/
write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase);//dpr40
write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
/* 2D Destination Base.
It is an address offset (128 bit aligned) from the beginning of frame buffer.
*/
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);//dpr44
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
......@@ -254,14 +254,14 @@ unsigned int rop2) /* ROP value */
width *= 3;
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
FIELD_VALUE(0, DE_PITCH, SOURCE, sPitch));//dpr10
FIELD_VALUE(0, DE_PITCH, SOURCE, sPitch)); /* dpr10 */
}
else
#endif
{
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, (dPitch/Bpp)) |
FIELD_VALUE(0, DE_PITCH, SOURCE, (sPitch/Bpp)));//dpr10
FIELD_VALUE(0, DE_PITCH, SOURCE, (sPitch/Bpp))); /* dpr10 */
}
/* Screen Window width in Pixels.
......@@ -269,7 +269,7 @@ unsigned int rop2) /* ROP value */
*/
write_dpr(accel, DE_WINDOW_WIDTH,
FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp)));//dpr3c
FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
if (accel->de_wait() != 0){
return -1;
......@@ -280,14 +280,14 @@ unsigned int rop2) /* ROP value */
write_dpr(accel, DE_SOURCE,
FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
FIELD_VALUE(0, DE_SOURCE, X_K1, sx) |
FIELD_VALUE(0, DE_SOURCE, Y_K2, sy));//dpr0
FIELD_VALUE(0, DE_SOURCE, Y_K2, sy)); /* dpr0 */
write_dpr(accel, DE_DESTINATION,
FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
FIELD_VALUE(0, DE_DESTINATION, X, dx) |
FIELD_VALUE(0, DE_DESTINATION, Y, dy));//dpr04
FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
write_dpr(accel, DE_DIMENSION,
FIELD_VALUE(0, DE_DIMENSION, X, width) |
FIELD_VALUE(0, DE_DIMENSION, Y_ET, height));//dpr08
FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
de_ctrl =
FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
......@@ -297,7 +297,7 @@ unsigned int rop2) /* ROP value */
FIELD_SET(0, DE_CONTROL, DIRECTION, RIGHT_TO_LEFT)
: FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT)) |
FIELD_SET(0, DE_CONTROL, STATUS, START);
write_dpr(accel, DE_CONTROL, de_ctrl);//dpr0c
write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
}
return 0;
......@@ -346,7 +346,6 @@ int hw_imageblit(struct lynx_accel *accel,
if(accel->de_wait() != 0)
{
// inf_msg("*** ImageBlit return -1 ***\n");
return -1;
}
......@@ -370,7 +369,7 @@ int hw_imageblit(struct lynx_accel *accel,
startBit *= 3;
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch));//dpr10
FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch)); /* dpr10 */
}
else
......@@ -378,7 +377,7 @@ int hw_imageblit(struct lynx_accel *accel,
{
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch/bytePerPixel) |
FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch/bytePerPixel));//dpr10
FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch/bytePerPixel)); /* dpr10 */
}
/* Screen Window width in Pixels.
......@@ -392,16 +391,16 @@ int hw_imageblit(struct lynx_accel *accel,
For mono bitmap, use startBit for X_K1. */
write_dpr(accel, DE_SOURCE,
FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit));//dpr00
FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit)); /* dpr00 */
write_dpr(accel, DE_DESTINATION,
FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
FIELD_VALUE(0, DE_DESTINATION, X, dx) |
FIELD_VALUE(0, DE_DESTINATION, Y, dy));//dpr04
FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
write_dpr(accel, DE_DIMENSION,
FIELD_VALUE(0, DE_DIMENSION, X, width) |
FIELD_VALUE(0, DE_DIMENSION, Y_ET, height));//dpr08
FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
write_dpr(accel, DE_FOREGROUND, fColor);
write_dpr(accel, DE_BACKGROUND, bColor);
......
drivers/staging/sm750fb/sm750_accel.h
View file @ 5ee35ea7
......@@ -113,7 +113,7 @@
#define DE_CONTROL_TRANSPARENCY_ENABLE 1
#define DE_CONTROL_ROP 7:0
// Pseudo fields.
/* Pseudo fields. */
#define DE_CONTROL_SHORT_STROKE_DIR 27:24
#define DE_CONTROL_SHORT_STROKE_DIR_225 0
......
drivers/staging/sm750fb/sm750_cursor.c
View file @ 5ee35ea7
......@@ -141,10 +141,10 @@ void hw_cursor_setData(struct lynx_cursor * cursor,
{
if(opr & (0x80 >> j))
{ //use fg color,id = 2
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
//use bg color,id = 1
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
......@@ -221,10 +221,10 @@ void hw_cursor_setData2(struct lynx_cursor * cursor,
{
if(opr & (0x80 >> j))
{ //use fg color,id = 2
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
//use bg color,id = 1
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
......@@ -238,7 +238,6 @@ void hw_cursor_setData2(struct lynx_cursor * cursor,
/* assume pitch is 1,2,4,8,...*/
if(!(i&(pitch-1)))
//if((i+1) % pitch == 0)
{
/* need a return */
pstart += offset;
......
drivers/staging/sm750fb/sm750_help.h
View file @ 5ee35ea7
#ifndef LYNX_HELP_H__
#define LYNX_HELP_H__
/*****************************************************************************\
* FIELD MACROS *
\*****************************************************************************/
/* FIELD MACROS */
#define _LSB(f) (0 ? f)
#define _MSB(f) (1 ? f)
#define _COUNT(f) (_MSB(f) - _LSB(f) + 1)
......@@ -17,13 +15,7 @@
#define SET_FIELDV(d, f, v) (((d) & ~GET_MASK(f)) | \
(((v) & RAW_MASK(f)) << _LSB(f)))
////////////////////////////////////////////////////////////////////////////////
// //
// Internal macros //
// //
////////////////////////////////////////////////////////////////////////////////
/* Internal macros */
#define _F_START(f) (0 ? f)
#define _F_END(f) (1 ? f)
#define _F_SIZE(f) (1 + _F_END(f) - _F_START(f))
......@@ -31,13 +23,7 @@
#define _F_NORMALIZE(v, f) (((v) & _F_MASK(f)) >> _F_START(f))
#define _F_DENORMALIZE(v, f) (((v) << _F_START(f)) & _F_MASK(f))
////////////////////////////////////////////////////////////////////////////////
// //
// Global macros //
// //
////////////////////////////////////////////////////////////////////////////////
/* Global macros */
#define FIELD_GET(x, reg, field) \
( \
_F_NORMALIZE((x), reg ## _ ## field) \
......@@ -60,13 +46,7 @@
~ _F_MASK(reg ## _ ## field) \
)
////////////////////////////////////////////////////////////////////////////////
// //
// Field Macros //
// //
////////////////////////////////////////////////////////////////////////////////
/* Field Macros */
#define FIELD_START(field) (0 ? field)
#define FIELD_END(field) (1 ? field)
#define FIELD_SIZE(field) (1 + FIELD_END(field) - FIELD_START(field))
......
drivers/staging/sm750fb/sm750_hw.c
View file @ 5ee35ea7
......@@ -193,7 +193,6 @@ int hw_sm750_inithw(struct lynx_share* share, struct pci_dev * pdev)
/* init 2d engine */
if(!share->accel_off){
hw_sm750_initAccel(share);
// share->accel.de_wait = hw_sm750_deWait;
}
return 0;
......@@ -328,7 +327,6 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
#endif
/* set timing */
// modparm.pixel_clock = PS_TO_HZ(var->pixclock);
modparm.pixel_clock = ps_to_hz(var->pixclock);
modparm.vertical_sync_polarity = (var->sync & FB_SYNC_HOR_HIGH_ACT) ? POS:NEG;
modparm.horizontal_sync_polarity = (var->sync & FB_SYNC_VERT_HIGH_ACT) ? POS:NEG;
......@@ -618,7 +616,7 @@ int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
const struct fb_info *info)
{
uint32_t total;
//check params
/* check params */
if ((var->xoffset + var->xres > var->xres_virtual) ||
(var->yoffset + var->yres > var->yres_virtual)) {
return -EINVAL;
......
drivers/staging/sm750fb/sm750_hw.h
View file @ 5ee35ea7
......@@ -8,9 +8,6 @@
#define SM750LE_REVISION_ID (unsigned char)0xfe
#endif
//#define DEFAULT_MEM_CLOCK (DEFAULT_SM750_CHIP_CLOCK/1)
//#define DEFAULT_MASTER_CLOCK (DEFAULT_SM750_CHIP_CLOCK/3)
enum sm750_pnltype{
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7