Merge branch 'misc' into test

Documentation/kernel-parameters.txt

@@ -2173,7 +2173,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	thermal.crt=	[HW,ACPI]
 			-1: disable all critical trip points in all thermal zones
-			<degrees C>: lower all critical trip points
+			<degrees C>: override all critical trip points
 
 	thermal.nocrt=	[HW,ACPI]
 			Set to disable actions on ACPI thermal zone

arch/x86/kernel/acpi/boot.c

@@ -97,7 +97,6 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #warning ACPI uses CMPXCHG, i486 and later hardware
 #endif
 
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
 
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
@@ -156,6 +155,9 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 }
 
 #ifdef CONFIG_PCI_MMCONFIG
+
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 /* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;

arch/x86/kernel/acpi/sleep.c

@@ -21,7 +21,7 @@ unsigned long acpi_realmode_flags;
 static unsigned long acpi_realmode;
 
 #if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
-static char temp_stack[10240];
+static char temp_stack[4096];
 #endif
 
 /**
@@ -97,7 +97,7 @@ int acpi_save_state_mem(void)
 #else /* CONFIG_64BIT */
 	header->trampoline_segment = setup_trampoline() >> 4;
 #ifdef CONFIG_SMP
-	stack_start.sp = temp_stack + 4096;
+	stack_start.sp = temp_stack + sizeof(temp_stack);
 #endif
 	initial_code = (unsigned long)wakeup_long64;
 	saved_magic = 0x123456789abcdef0;

drivers/acpi/Kconfig

@@ -42,7 +42,7 @@ if ACPI
 
 config ACPI_SLEEP
 	bool
-	depends on PM_SLEEP
+	depends on SUSPEND || HIBERNATION
 	default y
 
 config ACPI_PROCFS
@@ -252,7 +252,7 @@ config ACPI_ASUS
 
 config ACPI_TOSHIBA
 	tristate "Toshiba Laptop Extras"
-	depends on X86
+	depends on X86 && INPUT
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  This driver adds support for access to certain system settings

drivers/acpi/ac.c

@@ -269,7 +269,7 @@ static int acpi_ac_add(struct acpi_device *device)
 	ac->device = device;
 	strcpy(acpi_device_name(device), ACPI_AC_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_AC_CLASS);
-	acpi_driver_data(device) = ac;
+	device->driver_data = ac;
 
 	result = acpi_ac_get_state(ac);
 	if (result)

drivers/acpi/acpi_memhotplug.c

@@ -403,7 +403,7 @@ static int acpi_memory_device_add(struct acpi_device *device)
 	mem_device->device = device;
 	sprintf(acpi_device_name(device), "%s", ACPI_MEMORY_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_MEMORY_DEVICE_CLASS);
-	acpi_driver_data(device) = mem_device;
+	device->driver_data = mem_device;
 
 	/* Get the range from the _CRS */
 	result = acpi_memory_get_device_resources(mem_device);

drivers/acpi/asus_acpi.c

@@ -1244,6 +1244,8 @@ static int asus_hotk_get_info(void)
 			       "default values\n", string);
 			printk(KERN_NOTICE
 			       "  send /proc/acpi/dsdt to the developers\n");
+			kfree(model);
+			return -ENODEV;
 		}
 		hotk->methods = &model_conf[hotk->model];
 		return AE_OK;
@@ -1321,7 +1323,7 @@ static int asus_hotk_add(struct acpi_device *device)
 	hotk->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_HOTK_CLASS);
-	acpi_driver_data(device) = hotk;
+	device->driver_data = hotk;
 	hotk->device = device;
 
 	result = asus_hotk_check();

drivers/acpi/battery.c

@@ -804,7 +804,7 @@ static int acpi_battery_add(struct acpi_device *device)
 	battery->device = device;
 	strcpy(acpi_device_name(device), ACPI_BATTERY_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_BATTERY_CLASS);
-	acpi_driver_data(device) = battery;
+	device->driver_data = battery;
 	mutex_init(&battery->lock);
 	acpi_battery_update(battery);
 #ifdef CONFIG_ACPI_PROCFS_POWER

drivers/acpi/button.c

@@ -384,7 +384,7 @@ static int acpi_button_add(struct acpi_device *device)
 		return -ENOMEM;
 
 	button->device = device;
-	acpi_driver_data(device) = button;
+	device->driver_data = button;
 
 	button->input = input = input_allocate_device();
 	if (!input) {

drivers/acpi/container.c

@@ -108,7 +108,7 @@ static int acpi_container_add(struct acpi_device *device)
 	container->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_CONTAINER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_CONTAINER_CLASS);
-	acpi_driver_data(device) = container;
+	device->driver_data = container;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device <%s> bid <%s>\n",
 			  acpi_device_name(device), acpi_device_bid(device)));

drivers/acpi/ec.c

@@ -799,7 +799,7 @@ static int acpi_ec_add(struct acpi_device *device)
 
 	if (!first_ec)
 		first_ec = ec;
-	acpi_driver_data(device) = ec;
+	device->driver_data = ec;
 	acpi_ec_add_fs(device);
 	pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
 			  ec->gpe, ec->command_addr, ec->data_addr);
@@ -824,7 +824,7 @@ static int acpi_ec_remove(struct acpi_device *device, int type)
 	}
 	mutex_unlock(&ec->lock);
 	acpi_ec_remove_fs(device);
-	acpi_driver_data(device) = NULL;
+	device->driver_data = NULL;
 	if (ec == first_ec)
 		first_ec = NULL;
 	kfree(ec);

drivers/acpi/fan.c

@@ -265,7 +265,7 @@ static int acpi_fan_add(struct acpi_device *device)
 
 	dev_info(&device->dev, "registered as cooling_device%d\n", cdev->id);
 
-	acpi_driver_data(device) = cdev;
+	device->driver_data = cdev;
 	result = sysfs_create_link(&device->dev.kobj,
 				   &cdev->device.kobj,
 				   "thermal_cooling");

drivers/acpi/pci_link.c

@@ -737,7 +737,7 @@ static int acpi_pci_link_add(struct acpi_device *device)
 	link->device = device;
 	strcpy(acpi_device_name(device), ACPI_PCI_LINK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS);
-	acpi_driver_data(device) = link;
+	device->driver_data = link;
 
 	mutex_lock(&acpi_link_lock);
 	result = acpi_pci_link_get_possible(link);

drivers/acpi/pci_root.c

@@ -206,7 +206,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	root->device = device;
 	strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
-	acpi_driver_data(device) = root;
+	device->driver_data = root;
 
 	device->ops.bind = acpi_pci_bind;
 

drivers/acpi/power.c

@@ -679,7 +679,7 @@ static int acpi_power_add(struct acpi_device *device)
 	strcpy(resource->name, device->pnp.bus_id);
 	strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
-	acpi_driver_data(device) = resource;
+	device->driver_data = resource;
 
 	/* Evalute the object to get the system level and resource order. */
 	status = acpi_evaluate_object(device->handle, NULL, NULL, &buffer);
@@ -755,7 +755,7 @@ static int acpi_power_resume(struct acpi_device *device)
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
 
-	resource = (struct acpi_power_resource *)acpi_driver_data(device);
+	resource = acpi_driver_data(device);
 
 	result = acpi_power_get_state(device->handle, &state);
 	if (result)

drivers/acpi/processor_core.c

@@ -818,7 +818,7 @@ static int acpi_processor_add(struct acpi_device *device)
 	pr->handle = device->handle;
 	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
-	acpi_driver_data(device) = pr;
+	device->driver_data = pr;
 
 	return 0;
 }

drivers/acpi/sbs.c

@@ -931,7 +931,7 @@ static int acpi_sbs_add(struct acpi_device *device)
 	sbs->device = device;
 	strcpy(acpi_device_name(device), ACPI_SBS_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_SBS_CLASS);
-	acpi_driver_data(device) = sbs;
+	device->driver_data = sbs;
 
 	result = acpi_charger_add(sbs);
 	if (result)

drivers/acpi/sbshc.c

@@ -282,7 +282,7 @@ static int acpi_smbus_hc_add(struct acpi_device *device)
 	hc->ec = acpi_driver_data(device->parent);
 	hc->offset = (val >> 8) & 0xff;
 	hc->query_bit = val & 0xff;
-	acpi_driver_data(device) = hc;
+	device->driver_data = hc;
 
 	acpi_ec_add_query_handler(hc->ec, hc->query_bit, NULL, smbus_alarm, hc);
 	printk(KERN_INFO PREFIX "SBS HC: EC = 0x%p, offset = 0x%0x, query_bit = 0x%0x\n",
@@ -303,7 +303,7 @@ static int acpi_smbus_hc_remove(struct acpi_device *device, int type)
 	hc = acpi_driver_data(device);
 	acpi_ec_remove_query_handler(hc->ec, hc->query_bit);
 	kfree(hc);
-	acpi_driver_data(device) = NULL;
+	device->driver_data = NULL;
 	return 0;
 }
 

drivers/acpi/scan.c

@@ -391,7 +391,7 @@ static int acpi_device_remove(struct device * dev)
 			acpi_drv->ops.remove(acpi_dev, acpi_dev->removal_type);
 	}
 	acpi_dev->driver = NULL;
-	acpi_driver_data(dev) = NULL;
+	acpi_dev->driver_data = NULL;
 
 	put_device(dev);
 	return 0;
@@ -544,7 +544,7 @@ acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver)
 	result = driver->ops.add(device);
 	if (result) {
 		device->driver = NULL;
-		acpi_driver_data(device) = NULL;
+		device->driver_data = NULL;
 		return result;
 	}
 

drivers/acpi/sleep/main.c

@@ -23,6 +23,7 @@
 #include "sleep.h"
 
 u8 sleep_states[ACPI_S_STATE_COUNT];
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
 static int acpi_sleep_prepare(u32 acpi_state)
 {
@@ -45,9 +46,7 @@ static int acpi_sleep_prepare(u32 acpi_state)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-
+#ifdef CONFIG_ACPI_SLEEP
 /*
  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
  * user to request that behavior by using the 'acpi_old_suspend_ordering'
@@ -132,7 +131,7 @@ static void acpi_pm_end(void)
 	 */
 	acpi_target_sleep_state = ACPI_STATE_S0;
 }
-#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_ACPI_SLEEP */
 
 #ifdef CONFIG_SUSPEND
 extern void do_suspend_lowlevel(void);

drivers/acpi/thermal.c

@@ -388,10 +388,12 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 			} else if (crt > 0) {
 				unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
 				/*
-				 * Allow override to lower critical threshold
+				 * Allow override critical threshold
 				 */
-				if (crt_k < tz->trips.critical.temperature)
-					tz->trips.critical.temperature = crt_k;
+				if (crt_k > tz->trips.critical.temperature)
+					printk(KERN_WARNING PREFIX
+						"Critical threshold %d C\n", crt);
+				tz->trips.critical.temperature = crt_k;
 			}
 		}
 	}
@@ -1647,7 +1649,7 @@ static int acpi_thermal_add(struct acpi_device *device)
 	strcpy(tz->name, device->pnp.bus_id);
 	strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
-	acpi_driver_data(device) = tz;
+	device->driver_data = tz;
 	mutex_init(&tz->lock);
 
 

drivers/acpi/toshiba_acpi.c

@@ -392,7 +392,7 @@ static unsigned long write_video(const char *buffer, unsigned long count)
 
 	hci_read1(HCI_VIDEO_OUT, &video_out, &hci_result);
 	if (hci_result == HCI_SUCCESS) {
-		int new_video_out = video_out;
+		unsigned int new_video_out = video_out;
 		if (lcd_out != -1)
 			_set_bit(&new_video_out, HCI_VIDEO_OUT_LCD, lcd_out);
 		if (crt_out != -1)

drivers/acpi/video.c

@@ -1491,7 +1491,7 @@ acpi_video_bus_get_one_device(struct acpi_device *device,
 
 		strcpy(acpi_device_name(device), ACPI_VIDEO_DEVICE_NAME);
 		strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS);
-		acpi_driver_data(device) = data;
+		device->driver_data = data;
 
 		data->device_id = device_id;
 		data->video = video;
@@ -1982,7 +1982,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	video->device = device;
 	strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME);
 	strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS);
-	acpi_driver_data(device) = video;
+	device->driver_data = video;
 
 	acpi_video_bus_find_cap(video);
 	error = acpi_video_bus_check(video);
@@ -2058,7 +2058,7 @@ static int acpi_video_bus_add(struct acpi_device *device)
 	acpi_video_bus_remove_fs(device);
  err_free_video:
 	kfree(video);
-	acpi_driver_data(device) = NULL;
+	device->driver_data = NULL;
 
 	return error;
 }

drivers/misc/asus-laptop.c

@@ -139,6 +139,7 @@ ASUS_HANDLE(lcd_switch, "\\_SB.PCI0.SBRG.EC0._Q10",	/* All new models */
 	    "\\_SB.PCI0.PX40.ECD0._Q10",	/* L3C */
 	    "\\_SB.PCI0.PX40.EC0.Q10",	/* M1A */
 	    "\\_SB.PCI0.LPCB.EC0._Q10",	/* P30 */
+	    "\\_SB.PCI0.LPCB.EC0._Q0E", /* P30/P35 */
 	    "\\_SB.PCI0.PX40.Q10",	/* S1x */
 	    "\\Q10");		/* A2x, L2D, L3D, M2E */
 
@@ -350,7 +351,7 @@ static void write_status(acpi_handle handle, int out, int mask)
 	static void object##_led_set(struct led_classdev *led_cdev,	\
 				     enum led_brightness value)		\
 	{								\
-		object##_led_wk = value;				\
+		object##_led_wk = (value > 0) ? 1 : 0;			\
 		queue_work(led_workqueue, &object##_led_work);		\
 	}								\
 	static void object##_led_update(struct work_struct *ignored)	\
@@ -996,7 +997,7 @@ static int asus_hotk_add(struct acpi_device *device)
 	hotk->handle = device->handle;
 	strcpy(acpi_device_name(device), ASUS_HOTK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ASUS_HOTK_CLASS);
-	acpi_driver_data(device) = hotk;
+	device->driver_data = hotk;
 	hotk->device = device;
 
 	result = asus_hotk_check();

drivers/misc/eeepc-laptop.c

@@ -554,7 +554,7 @@ static int eeepc_hotk_add(struct acpi_device *device)
 	ehotk->handle = device->handle;
 	strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME);
 	strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS);
-	acpi_driver_data(device) = ehotk;
+	device->driver_data = ehotk;
 	ehotk->device = device;
 	result = eeepc_hotk_check();
 	if (result)

drivers/misc/fujitsu-laptop.c

@@ -508,7 +508,7 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 	fujitsu->acpi_handle = device->handle;
 	sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
-	acpi_driver_data(device) = fujitsu;
+	device->driver_data = fujitsu;
 
 	status = acpi_install_notify_handler(device->handle,
 					     ACPI_DEVICE_NOTIFY,
@@ -718,7 +718,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 	sprintf(acpi_device_name(device), "%s",
 		ACPI_FUJITSU_HOTKEY_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
-	acpi_driver_data(device) = fujitsu_hotkey;
+	device->driver_data = fujitsu_hotkey;
 
 	status = acpi_install_notify_handler(device->handle,
 					     ACPI_DEVICE_NOTIFY,

drivers/misc/intel_menlow.c

@@ -175,7 +175,7 @@ static int intel_menlow_memory_add(struct acpi_device *device)
 		goto end;
 	}
 
-	acpi_driver_data(device) = cdev;
+	device->driver_data = cdev;
 	result = sysfs_create_link(&device->dev.kobj,
 				&cdev->device.kobj, "thermal_cooling");
 	if (result)

drivers/misc/sony-laptop.c

@@ -970,7 +970,7 @@ static int sony_nc_resume(struct acpi_device *device)
 	/* set the last requested brightness level */
 	if (sony_backlight_device &&
 			!sony_backlight_update_status(sony_backlight_device))
-		printk(KERN_WARNING DRV_PFX "unable to restore brightness level");
+		printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
 
 	/* re-initialize models with specific requirements */
 	dmi_check_system(sony_nc_ids);

drivers/misc/thinkpad_acpi.c

@@ -543,7 +543,7 @@ static int __init setup_acpi_notify(struct ibm_struct *ibm)
 		return -ENODEV;
 	}
 
-	acpi_driver_data(ibm->acpi->device) = ibm;
+	ibm->acpi->device->driver_data = ibm;
 	sprintf(acpi_device_class(ibm->acpi->device), "%s/%s",
 		TPACPI_ACPI_EVENT_PREFIX,
 		ibm->name);

include/acpi/acpi_bus.h

@@ -300,7 +300,11 @@ struct acpi_device {
 	enum acpi_bus_removal_type removal_type;	/* indicate for different removal type */
 };
 
-#define acpi_driver_data(d)	((d)->driver_data)
+static inline void *acpi_driver_data(struct acpi_device *d)
+{
+	return d->driver_data;
+}
+
 #define to_acpi_device(d)	container_of(d, struct acpi_device, dev)
 #define to_acpi_driver(d)	container_of(d, struct acpi_driver, drv)