Merge tag 'renesas-dt2-for-v4.8' of...

Merge tag 'renesas-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.8

* Use APMU on R-Car Gen2 and provide SMP for r8a7793 SoC
* Update console parameters to uniformly use chosen/stdout-path,
  serial0, not provide kernel unnecessary command line parameters
* Add DU pins to silk board
* Add support for blanche/r8a7792
* Name pfc subnodes after device name

* tag 'renesas-dt2-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (41 commits)
  ARM: dts: r8a7792: add SMP support
  ARM: dts: r8a7793: Add APMU node and second CPU core
  ARM: dts: r8a7791: Add APMU node
  ARM: dts: r8a7790: Add APMU nodes
  devicetree: bindings: Renesas APMU and SMP Enable method
  ARM: dts: kzm9g: Update console parameters
  ARM: dts: kzm9d: Update console parameters
  ARM: dts: marzen: Add serial port config to chosen/stdout-path
  ARM: dts: genmai: Update console parameters
  ARM: dts: armadillo800eva: Update console parameters
  ARM: dts: r8a7792: add JPU support
  ARM: dts: r8a7792: add JPU clocks
  ARM: dts: silk: add DU pins
  ARM: dts: blanche: add Ethernet support
  ARM: dts: blanche: initial device tree
  ARM: dts: blanche: document Blanche board
  ARM: dts: r8a7792: add IRQC support
  ARM: dts: r8a7792: add [H]SCIF support
  ARM: dts: r8a7792: add SYS-DMAC support
  ARM: dts: r8a7792: initial SoC device tree
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/cpus.txt

@@ -206,6 +206,7 @@ nodes to be present and contain the properties described below.
 			    "qcom,gcc-msm8660"
 			    "qcom,kpss-acc-v1"
 			    "qcom,kpss-acc-v2"
+			    "renesas,apmu"
 			    "rockchip,rk3036-smp"
 			    "rockchip,rk3066-smp"
 			    "ste,dbx500-smp"

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -39,6 +39,8 @@ Boards:
     compatible = "renesas,ape6evm", "renesas,r8a73a4"
   - Atmark Techno Armadillo-800 EVA
     compatible = "renesas,armadillo800eva"
+  - Blanche (RTP0RC7792SEB00010S)
+    compatible = "renesas,blanche", "renesas,r8a7792"
   - BOCK-W
     compatible = "renesas,bockw", "renesas,r8a7778"
   - Genmai (RTK772100BC00000BR)

Documentation/devicetree/bindings/power/renesas,apmu.txt

+DT bindings for the Renesas Advanced Power Management Unit
+
+Renesas R-Car line of SoCs utilize one or more APMU hardware units
+for CPU core power domain control including SMP boot and CPU Hotplug.
+
+Required properties:
+
+- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback.
+	      Examples with soctypes are:
+		- "renesas,r8a7790-apmu" (R-Car H2)
+		- "renesas,r8a7791-apmu" (R-Car M2-W)
+		- "renesas,r8a7792-apmu" (R-Car V2H)
+		- "renesas,r8a7793-apmu" (R-Car M2-N)
+		- "renesas,r8a7794-apmu" (R-Car E2)
+
+- reg: Base address and length of the I/O registers used by the APMU.
+
+- cpus: This node contains a list of CPU cores, which should match the order
+  of CPU cores used by the WUPCR and PSTR registers in the Advanced Power
+  Management Unit section of the device's datasheet.
+
+
+Example:
+
+This shows the r8a7791 APMU that can control CPU0 and CPU1.
+
+	apmu@e6152000 {
+		compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1>;
+	};

arch/arm/boot/dts/Makefile

@@ -653,6 +653,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -23,9 +23,13 @@ memory@40000000 {
 		reg = <0x40000000 0x8000000>;
 	};
 
+	aliases {
+		serial1 = &uart1;
+	};
+
 	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-		stdout-path = &uart1;
+		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+		stdout-path = "serial1:115200n8";
 	};
 
 	gpio_keys {

arch/arm/boot/dts/r7s72100-genmai.dts

@@ -17,12 +17,12 @@ / {
 	compatible = "renesas,genmai", "renesas,r7s72100";
 
 	aliases {
-		serial2 = &scif2;
+		serial0 = &scif2;
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@8000000 {

arch/arm/boot/dts/r8a73a4-ape6evm.dts

@@ -188,12 +188,12 @@ &cmt1 {
 };
 
 &pfc {
-	scifa0_pins: serial0 {
+	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
 		function = "scifa0";
 	};
 
-	mmc0_pins: mmc {
+	mmc0_pins: mmc0 {
 		groups = "mmc0_data8", "mmc0_ctrl";
 		function = "mmc0";
 	};

arch/arm/boot/dts/r8a7740-armadillo800eva.dts

@@ -20,12 +20,12 @@ / {
 	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
 
 	aliases {
-		serial1 = &scifa1;
+		serial0 = &scifa1;
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scifa1;
+		bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -232,7 +232,7 @@ ether_pins: ether {
 		function = "gether";
 	};
 
-	scifa1_pins: serial1 {
+	scifa1_pins: scifa1 {
 		groups = "scifa1_data";
 		function = "scifa1";
 	};

arch/arm/boot/dts/r8a7778-bockw.dts

@@ -129,7 +129,7 @@ &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_a", "scif0_ctrl";
 		function = "scif0";
 	};

arch/arm/boot/dts/r8a7779-marzen.dts

@@ -25,7 +25,7 @@ aliases {
 
 	chosen {
 		bootargs = "ignore_loglevel root=/dev/nfs ip=on";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@60000000 {
@@ -195,12 +195,12 @@ lbsc {
 		};
 	};
 
-	scif2_pins: serial2 {
+	scif2_pins: scif2 {
 		groups = "scif2_data_c";
 		function = "scif2";
 	};
 
-	scif4_pins: serial4 {
+	scif4_pins: scif4 {
 		groups = "scif4_data";
 		function = "scif4";
 	};

arch/arm/boot/dts/r8a7790-lager.dts

@@ -317,7 +317,7 @@ du_pins: du {
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
@@ -337,7 +337,7 @@ phy1_pins: phy1 {
 		function = "intc";
 	};
 
-	scifa1_pins: serial1 {
+	scifa1_pins: scifa1 {
 		groups = "scifa1_data";
 		function = "scifa1";
 	};
@@ -371,12 +371,12 @@ mmc1_pins: mmc1 {
 		function = "mmc1";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
 
-	msiof1_pins: spi2 {
+	msiof1_pins: msiof1 {
 		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 				 "msiof1_tx";
 		function = "msiof1";
@@ -427,7 +427,7 @@ usb2_pins: usb2 {
 		function = "usb2";
 	};
 
-	vin1_pins: vin {
+	vin1_pins: vin1 {
 		groups = "vin1_data8", "vin1_clk";
 		function = "vin1";
 	};

arch/arm/boot/dts/r8a7790.dtsi

@@ -44,6 +44,7 @@ aliases {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -164,6 +165,18 @@ cooling-maps {
 		};
 	};
 
+	apmu@e6151000 {
+		compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+		reg = <0 0xe6151000 0 0x188>;
+		cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+	};
+
+	apmu@e6152000 {
+		compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -332,12 +332,12 @@ du_pins: du {
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
 
-	scif1_pins: serial1 {
+	scif1_pins: scif1 {
 		groups = "scif1_data_d";
 		function = "scif1";
 	};
@@ -372,12 +372,12 @@ sdhi2_pins: sd2 {
 		function = "sdhi2";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
 
-	msiof0_pins: spi1 {
+	msiof0_pins: msiof0 {
 		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 				 "msiof0_tx";
 		function = "msiof0";

arch/arm/boot/dts/r8a7791-porter.dts

@@ -142,7 +142,7 @@ &extal_clk {
 };
 
 &pfc {
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
@@ -167,7 +167,7 @@ sdhi2_pins: sd2 {
 		function = "sdhi2";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};

arch/arm/boot/dts/r8a7791.dtsi

@@ -43,6 +43,7 @@ aliases {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -101,6 +102,12 @@ cooling-maps {
 		};
 	};
 
+	apmu@e6152000 {
+		compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;

arch/arm/boot/dts/r8a7792-blanche.dts

+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&scif0 {
+	status = "okay";
+};
+
+&scif3 {
+	status = "okay";
+};

arch/arm/boot/dts/r8a7793-gose.dts

@@ -320,12 +320,12 @@ du_pins: du {
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
 
-	scif1_pins: serial1 {
+	scif1_pins: scif1 {
 		groups = "scif1_data_d";
 		function = "scif1";
 	};
@@ -360,7 +360,7 @@ sdhi2_pins: sd2 {
 		renesas,function = "sdhi2";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};

arch/arm/boot/dts/r8a7793.dtsi

@@ -35,6 +35,7 @@ aliases {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -56,6 +57,14 @@ cpu0: cpu@0 {
 			next-level-cache = <&L2_CA15>;
 		};
 
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+		};
+
 		L2_CA15: cache-controller@0 {
 			compatible = "cache";
 			reg = <0>;
@@ -65,6 +74,12 @@ L2_CA15: cache-controller@0 {
 		};
 	};
 
+	apmu@e6152000 {
+		compatible = "renesas,r8a7793-apmu", "renesas,apmu";
+		reg = <0 0xe6152000 0 0x188>;
+		cpus = <&cpu0 &cpu1>;
+	};
+
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive	= <0>;

arch/arm/boot/dts/r8a7794-alt.dts

@@ -111,7 +111,7 @@ du_pins: du {
 		function = "du";
 	};
 
-	scif2_pins: serial2 {
+	scif2_pins: scif2 {
 		groups = "scif2_data";
 		function = "scif2";
 	};
@@ -147,7 +147,7 @@ &cmt0 {
 };
 
 &pfc {
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};

arch/arm/boot/dts/r8a7794-silk.dts

@@ -129,7 +129,7 @@ &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
-	scif2_pins: serial2 {
+	scif2_pins: scif2 {
 		groups = "scif2_data";
 		function = "scif2";
 	};
@@ -164,7 +164,7 @@ sdhi1_pins: sd1 {
 		function = "sdhi1";
 	};
 
-	qspi_pins: spi0 {
+	qspi_pins: qspi {
 		groups = "qspi_ctrl", "qspi_data4";
 		function = "qspi";
 	};
@@ -183,6 +183,16 @@ usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
 	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
 };
 
 &scif2 {
@@ -360,6 +370,8 @@ &usbphy {
 };
 
 &du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,

arch/arm/boot/dts/sh73a0-kzm9g.dts

@@ -22,7 +22,7 @@ / {
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
 	aliases {
-		serial4 = &scifa4;
+		serial0 = &scifa4;
 	};
 
 	cpus {
@@ -39,8 +39,8 @@ cpu@0 {
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
-		stdout-path = &scifa4;
+		bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -352,7 +352,7 @@ cfg {
 		};
 	};
 
-	scifa4_pins: serial4 {
+	scifa4_pins: scifa4 {
 		groups = "scifa4_data", "scifa4_ctrl";
 		function = "scifa4";
 	};

include/dt-bindings/clock/r8a7792-clock.h

+/*
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7792_H__
+#define __DT_BINDINGS_CLOCK_R8A7792_H__
+
+/* CPG */
+#define R8A7792_CLK_MAIN		0
+#define R8A7792_CLK_PLL0		1
+#define R8A7792_CLK_PLL1		2
+#define R8A7792_CLK_PLL3		3
+#define R8A7792_CLK_LB			4
+#define R8A7792_CLK_QSPI		5
+#define R8A7792_CLK_Z			6
+#define R8A7792_CLK_ADSP		7
+
+/* MSTP0 */
+#define R8A7792_CLK_MSIOF0		0
+
+/* MSTP1 */
+#define R8A7792_CLK_JPU			6
+#define R8A7792_CLK_TMU1		11
+#define R8A7792_CLK_TMU3		21
+#define R8A7792_CLK_TMU2		22
+#define R8A7792_CLK_CMT0		24
+#define R8A7792_CLK_TMU0		25
+#define R8A7792_CLK_VSP1DU1		27
+#define R8A7792_CLK_VSP1DU0		28
+#define R8A7792_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7792_CLK_MSIOF1		8
+#define R8A7792_CLK_SYS_DMAC1		18
+#define R8A7792_CLK_SYS_DMAC0		19
+
+/* MSTP3 */
+#define R8A7792_CLK_TPU0		4
+#define R8A7792_CLK_SDHI0		14
+#define R8A7792_CLK_CMT1		29
+
+/* MSTP4 */
+#define R8A7792_CLK_IRQC		7
+
+/* MSTP5 */
+#define R8A7792_CLK_AUDIO_DMAC0		2
+#define R8A7792_CLK_THERMAL		22
+#define R8A7792_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7792_CLK_HSCIF1		16
+#define R8A7792_CLK_HSCIF0		17
+#define R8A7792_CLK_SCIF3		18
+#define R8A7792_CLK_SCIF2		19
+#define R8A7792_CLK_SCIF1		20
+#define R8A7792_CLK_SCIF0		21
+#define R8A7792_CLK_DU1			23
+#define R8A7792_CLK_DU0			24
+
+/* MSTP8 */
+#define R8A7792_CLK_VIN5		4
+#define R8A7792_CLK_VIN4		5
+#define R8A7792_CLK_VIN3		8
+#define R8A7792_CLK_VIN2		9
+#define R8A7792_CLK_VIN1		10
+#define R8A7792_CLK_VIN0		11
+#define R8A7792_CLK_ETHERAVB		12
+
+/* MSTP9 */
+#define R8A7792_CLK_GPIO7		4
+#define R8A7792_CLK_GPIO6		5
+#define R8A7792_CLK_GPIO5		7
+#define R8A7792_CLK_GPIO4		8
+#define R8A7792_CLK_GPIO3		9
+#define R8A7792_CLK_GPIO2		10
+#define R8A7792_CLK_GPIO1		11
+#define R8A7792_CLK_GPIO0		12
+#define R8A7792_CLK_GPIO11		13
+#define R8A7792_CLK_GPIO10		14
+#define R8A7792_CLK_CAN1		15
+#define R8A7792_CLK_CAN0		16
+#define R8A7792_CLK_QSPI_MOD		17
+#define R8A7792_CLK_GPIO9		19
+#define R8A7792_CLK_GPIO8		21
+#define R8A7792_CLK_I2C5		25
+#define R8A7792_CLK_IICDVFS		26
+#define R8A7792_CLK_I2C4		27
+#define R8A7792_CLK_I2C3		28
+#define R8A7792_CLK_I2C2		29
+#define R8A7792_CLK_I2C1		30
+#define R8A7792_CLK_I2C0		31
+
+/* MSTP10 */
+#define R8A7792_CLK_SSI_ALL		5
+#define R8A7792_CLK_SSI4		11
+#define R8A7792_CLK_SSI3		12
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7792_H__ */

include/dt-bindings/power/r8a7792-sysc.h

+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7792_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7792_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7792_PD_CA15_CPU0		0
+#define R8A7792_PD_CA15_CPU1		1
+#define R8A7792_PD_CA15_SCU		12
+#define R8A7792_PD_SGX			20
+#define R8A7792_PD_IMP			24
+
+/* Always-on power area */
+#define R8A7792_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A7792_SYSC_H__ */