Commit 60d0426d authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board

The Libre Computer ALL-H5-CC board is an upgraded version of the
ALL-H3-CC. Changes include:

  - Gigabit Ethernet via external RTL8211E Ethernet PHY
  - 16 MiB SPI NOR flash memory
  - PoE tap header
  - Line out jack removed

Only H5 variant test samples were made available, and the vendor is not
certain whether other SoC variants would be made or not. Furthermore the
board is a minor upgrade compared to the ALL-H3-CC. Thus the device tree
simply includes the one for the ALL-H3-CC, and adds the changes on top.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
parent 554581b7
...@@ -347,6 +347,11 @@ properties: ...@@ -347,6 +347,11 @@ properties:
- const: libretech,all-h3-it-h5 - const: libretech,all-h3-it-h5
- const: allwinner,sun50i-h5 - const: allwinner,sun50i-h5
- description: Libre Computer Board ALL-H5-CC H5
items:
- const: libretech,all-h5-cc-h5
- const: allwinner,sun50i-h5
- description: Lichee Pi One - description: Lichee Pi One
items: items:
- const: licheepi,licheepi-one - const: licheepi,licheepi-one
......
...@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb ...@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
#include "sun50i-h5-libretech-all-h3-cc.dts"
/ {
model = "Libre Computer Board ALL-H5-CC H5";
compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5";
aliases {
spi0 = &spi0;
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <5000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
vin-supply = <&reg_vcc5v0>;
};
};
&codec {
/* No line out; only onboard microphone */
allwinner,audio-routing =
"MIC1", "Mic",
"Mic", "MBIAS";
};
/* This board has external PHY */
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
/delete-property/ allwinner,leds-active-low;
status = "okay";
};
&external_mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&spi0 {
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment