Merge tag 'upstream-3.5-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI and UBIFS updates from Artem Bityutskiy:

UBIFS:
   * Always support xattrs    (remove the Kconfig option)
   * Always support debugging (remove the Kconfig option)
   * A fix for a memory leak on error path
   * A number of clean-ups
UBI:
   * Always support debugging (remove the Kconfig option)
   * Remove "data type" hint support
   * Huge amount of renames to prepare for the fastmap wor
   * A lot of clean-ups

* tag 'upstream-3.5-rc1' of git://git.infradead.org/linux-ubifs: (54 commits)
  UBI: modify ubi_wl_flush function to clear work queue for a lnum
  UBI: introduce UBI_ALL constant
  UBI: add lnum and vol_id to struct ubi_work
  UBI: add volume id struct ubi_ainf_peb
  UBI: add in hex the value for UBI_INTERNAL_VOL_START to comment
  UBI: rename scan.c to attach.c
  UBI: remove scan.h
  UBI: rename UBI_SCAN_UNKNOWN_EC
  UBI: move and rename attach_by_scanning
  UBI: rename _init_scan functions
  UBI: amend comments after all the renamings
  UBI: rename ubi_scan_leb_slab
  UBI: rename ubi_scan_move_to_list
  UBI: rename ubi_scan_destroy_ai
  UBI: rename ubi_scan_get_free_peb
  UBI: rename ubi_scan_rm_volume
  UBI: rename ubi_scan_find_av
  UBI: rename ubi_scan_add_used
  UBI: remove unused function
  UBI: make ubi_scan_erase_peb static and rename
  ...

drivers/mtd/ubi/Kconfig

@@ -52,12 +52,4 @@ config MTD_UBI_GLUEBI
 	   work on top of UBI. Do not enable this unless you use legacy
 	   software.
 
-config MTD_UBI_DEBUG
-	bool "UBI debugging"
-	depends on SYSFS
-	select DEBUG_FS
-	select KALLSYMS
-	help
-	  This option enables UBI debugging.
-
 endif # MTD_UBI

drivers/mtd/ubi/Makefile

 obj-$(CONFIG_MTD_UBI) += ubi.o
 
-ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o scan.o
-ubi-y += misc.o
+ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o attach.o
+ubi-y += misc.o debug.o
 
-ubi-$(CONFIG_MTD_UBI_DEBUG) += debug.o
 obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o

drivers/mtd/ubi/build.c

@@ -27,10 +27,6 @@
  * module load parameters or the kernel boot parameters. If MTD devices were
  * specified, UBI does not attach any MTD device, but it is possible to do
  * later using the "UBI control device".
- *
- * At the moment we only attach UBI devices by scanning, which will become a
- * bottleneck when flashes reach certain large size. Then one may improve UBI
- * and add other methods, although it does not seem to be easy to do.
  */
 
 #include <linux/err.h>
@@ -554,10 +550,10 @@ static void uif_close(struct ubi_device *ubi)
 }
 
 /**
- * free_internal_volumes - free internal volumes.
+ * ubi_free_internal_volumes - free internal volumes.
  * @ubi: UBI device description object
  */
-static void free_internal_volumes(struct ubi_device *ubi)
+void ubi_free_internal_volumes(struct ubi_device *ubi)
 {
 	int i;
 
@@ -568,59 +564,6 @@ static void free_internal_volumes(struct ubi_device *ubi)
 	}
 }
 
-/**
- * attach_by_scanning - attach an MTD device using scanning method.
- * @ubi: UBI device descriptor
- *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
- *
- * Note, currently this is the only method to attach UBI devices. Hopefully in
- * the future we'll have more scalable attaching methods and avoid full media
- * scanning. But even in this case scanning will be needed as a fall-back
- * attaching method if there are some on-flash table corruptions.
- */
-static int attach_by_scanning(struct ubi_device *ubi)
-{
-	int err;
-	struct ubi_scan_info *si;
-
-	si = ubi_scan(ubi);
-	if (IS_ERR(si))
-		return PTR_ERR(si);
-
-	ubi->bad_peb_count = si->bad_peb_count;
-	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
-	ubi->corr_peb_count = si->corr_peb_count;
-	ubi->max_ec = si->max_ec;
-	ubi->mean_ec = si->mean_ec;
-	ubi_msg("max. sequence number:       %llu", si->max_sqnum);
-
-	err = ubi_read_volume_table(ubi, si);
-	if (err)
-		goto out_si;
-
-	err = ubi_wl_init_scan(ubi, si);
-	if (err)
-		goto out_vtbl;
-
-	err = ubi_eba_init_scan(ubi, si);
-	if (err)
-		goto out_wl;
-
-	ubi_scan_destroy_si(si);
-	return 0;
-
-out_wl:
-	ubi_wl_close(ubi);
-out_vtbl:
-	free_internal_volumes(ubi);
-	vfree(ubi->vtbl);
-out_si:
-	ubi_scan_destroy_si(si);
-	return err;
-}
-
 /**
  * io_init - initialize I/O sub-system for a given UBI device.
  * @ubi: UBI device description object
@@ -790,11 +733,11 @@ static int io_init(struct ubi_device *ubi)
 	ubi_msg("data offset:                %d", ubi->leb_start);
 
 	/*
-	 * Note, ideally, we have to initialize ubi->bad_peb_count here. But
+	 * Note, ideally, we have to initialize @ubi->bad_peb_count here. But
 	 * unfortunately, MTD does not provide this information. We should loop
 	 * over all physical eraseblocks and invoke mtd->block_is_bad() for
-	 * each physical eraseblock. So, we skip ubi->bad_peb_count
-	 * uninitialized and initialize it after scanning.
+	 * each physical eraseblock. So, we leave @ubi->bad_peb_count
+	 * uninitialized so far.
 	 */
 
 	return 0;
@@ -805,7 +748,7 @@ static int io_init(struct ubi_device *ubi)
  * @ubi: UBI device description object
  * @vol_id: ID of the volume to re-size
  *
- * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in
+ * This function re-sizes the volume marked by the %UBI_VTBL_AUTORESIZE_FLG in
  * the volume table to the largest possible size. See comments in ubi-header.h
  * for more description of the flag. Returns zero in case of success and a
  * negative error code in case of failure.
@@ -881,7 +824,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	for (i = 0; i < UBI_MAX_DEVICES; i++) {
 		ubi = ubi_devices[i];
 		if (ubi && mtd->index == ubi->mtd->index) {
-			dbg_err("mtd%d is already attached to ubi%d",
+			ubi_err("mtd%d is already attached to ubi%d",
 				mtd->index, i);
 			return -EEXIST;
 		}
@@ -907,7 +850,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 			if (!ubi_devices[ubi_num])
 				break;
 		if (ubi_num == UBI_MAX_DEVICES) {
-			dbg_err("only %d UBI devices may be created",
+			ubi_err("only %d UBI devices may be created",
 				UBI_MAX_DEVICES);
 			return -ENFILE;
 		}
@@ -917,7 +860,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 		/* Make sure ubi_num is not busy */
 		if (ubi_devices[ubi_num]) {
-			dbg_err("ubi%d already exists", ubi_num);
+			ubi_err("ubi%d already exists", ubi_num);
 			return -EEXIST;
 		}
 	}
@@ -937,7 +880,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	spin_lock_init(&ubi->volumes_lock);
 
 	ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num);
-	dbg_msg("sizeof(struct ubi_scan_leb) %zu", sizeof(struct ubi_scan_leb));
+	dbg_msg("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb));
 	dbg_msg("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry));
 
 	err = io_init(ubi);
@@ -953,9 +896,9 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	if (err)
 		goto out_free;
 
-	err = attach_by_scanning(ubi);
+	err = ubi_attach(ubi);
 	if (err) {
-		dbg_err("failed to attach by scanning, error %d", err);
+		ubi_err("failed to attach mtd%d, error %d", mtd->index, err);
 		goto out_debugging;
 	}
 
@@ -1020,7 +963,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	uif_close(ubi);
 out_detach:
 	ubi_wl_close(ubi);
-	free_internal_volumes(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_debugging:
 	ubi_debugging_exit_dev(ubi);
@@ -1092,7 +1035,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	ubi_debugfs_exit_dev(ubi);
 	uif_close(ubi);
 	ubi_wl_close(ubi);
-	free_internal_volumes(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 	put_mtd_device(ubi->mtd);
 	ubi_debugging_exit_dev(ubi);

drivers/mtd/ubi/cdev.c

@@ -63,7 +63,7 @@ static int get_exclusive(struct ubi_volume_desc *desc)
 	users = vol->readers + vol->writers + vol->exclusive;
 	ubi_assert(users > 0);
 	if (users > 1) {
-		dbg_err("%d users for volume %d", users, vol->vol_id);
+		ubi_err("%d users for volume %d", users, vol->vol_id);
 		err = -EBUSY;
 	} else {
 		vol->readers = vol->writers = 0;
@@ -159,7 +159,7 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 
 	if (vol->updating) {
 		/* Update is in progress, seeking is prohibited */
-		dbg_err("updating");
+		ubi_err("updating");
 		return -EBUSY;
 	}
 
@@ -178,7 +178,7 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 	}
 
 	if (new_offset < 0 || new_offset > vol->used_bytes) {
-		dbg_err("bad seek %lld", new_offset);
+		ubi_err("bad seek %lld", new_offset);
 		return -EINVAL;
 	}
 
@@ -216,11 +216,11 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 		count, *offp, vol->vol_id);
 
 	if (vol->updating) {
-		dbg_err("updating");
+		ubi_err("updating");
 		return -EBUSY;
 	}
 	if (vol->upd_marker) {
-		dbg_err("damaged volume, update marker is set");
+		ubi_err("damaged volume, update marker is set");
 		return -EBADF;
 	}
 	if (*offp == vol->used_bytes || count == 0)
@@ -300,7 +300,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
 	if (off & (ubi->min_io_size - 1)) {
-		dbg_err("unaligned position");
+		ubi_err("unaligned position");
 		return -EINVAL;
 	}
 
@@ -309,7 +309,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	/* We can write only in fractions of the minimum I/O unit */
 	if (count & (ubi->min_io_size - 1)) {
-		dbg_err("unaligned write length");
+		ubi_err("unaligned write length");
 		return -EINVAL;
 	}
 
@@ -334,8 +334,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 			break;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, tbuf, off, len,
-					UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, tbuf, off, len);
 		if (err)
 			break;
 
@@ -477,9 +476,6 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		if (req.lnum < 0 || req.lnum >= vol->reserved_pebs ||
 		    req.bytes < 0 || req.lnum >= vol->usable_leb_size)
 			break;
-		if (req.dtype != UBI_LONGTERM && req.dtype != UBI_SHORTTERM &&
-		    req.dtype != UBI_UNKNOWN)
-			break;
 
 		err = get_exclusive(desc);
 		if (err < 0)
@@ -518,7 +514,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		if (err)
 			break;
 
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		break;
 	}
 
@@ -532,7 +528,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 			err = -EFAULT;
 			break;
 		}
-		err = ubi_leb_map(desc, req.lnum, req.dtype);
+		err = ubi_leb_map(desc, req.lnum);
 		break;
 	}
 
@@ -647,8 +643,8 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 	return 0;
 
 bad:
-	dbg_err("bad volume creation request");
-	ubi_dbg_dump_mkvol_req(req);
+	ubi_err("bad volume creation request");
+	ubi_dump_mkvol_req(req);
 	return err;
 }
 
@@ -713,12 +709,12 @@ static int rename_volumes(struct ubi_device *ubi,
 	for (i = 0; i < req->count - 1; i++) {
 		for (n = i + 1; n < req->count; n++) {
 			if (req->ents[i].vol_id == req->ents[n].vol_id) {
-				dbg_err("duplicated volume id %d",
+				ubi_err("duplicated volume id %d",
 					req->ents[i].vol_id);
 				return -EINVAL;
 			}
 			if (!strcmp(req->ents[i].name, req->ents[n].name)) {
-				dbg_err("duplicated volume name \"%s\"",
+				ubi_err("duplicated volume name \"%s\"",
 					req->ents[i].name);
 				return -EINVAL;
 			}
@@ -741,7 +737,7 @@ static int rename_volumes(struct ubi_device *ubi,
 		re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE);
 		if (IS_ERR(re->desc)) {
 			err = PTR_ERR(re->desc);
-			dbg_err("cannot open volume %d, error %d", vol_id, err);
+			ubi_err("cannot open volume %d, error %d", vol_id, err);
 			kfree(re);
 			goto out_free;
 		}
@@ -800,7 +796,7 @@ static int rename_volumes(struct ubi_device *ubi,
 				continue;
 
 			/* The volume exists but busy, or an error occurred */
-			dbg_err("cannot open volume \"%s\", error %d",
+			ubi_err("cannot open volume \"%s\", error %d",
 				re->new_name, err);
 			goto out_free;
 		}

drivers/mtd/ubi/debug.c

@@ -18,24 +18,49 @@
  * Author: Artem Bityutskiy (Битюцкий Артём)
  */
 
-/*
- * Here we keep all the UBI debugging stuff which should normally be disabled
- * and compiled-out, but it is extremely helpful when hunting bugs or doing big
- * changes.
- */
-
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 #include "ubi.h"
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
 
+
+/**
+ * ubi_dump_flash - dump a region of flash.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to dump
+ * @offset: the starting offset within the physical eraseblock to dump
+ * @len: the length of the region to dump
+ */
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
+{
+	int err;
+	size_t read;
+	void *buf;
+	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
+
+	buf = vmalloc(len);
+	if (!buf)
+		return;
+	err = mtd_read(ubi->mtd, addr, len, &read, buf);
+	if (err && err != -EUCLEAN) {
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
+			"read %zd bytes", err, len, pnum, offset, read);
+		goto out;
+	}
+
+	ubi_msg("dumping %d bytes of data from PEB %d, offset %d",
+		len, pnum, offset);
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
+out:
+	vfree(buf);
+	return;
+}
+
 /**
- * ubi_dbg_dump_ec_hdr - dump an erase counter header.
+ * ubi_dump_ec_hdr - dump an erase counter header.
  * @ec_hdr: the erase counter header to dump
  */
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 {
 	printk(KERN_DEBUG "Erase counter header dump:\n");
 	printk(KERN_DEBUG "\tmagic          %#08x\n",
@@ -57,10 +82,10 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 }
 
 /**
- * ubi_dbg_dump_vid_hdr - dump a volume identifier header.
+ * ubi_dump_vid_hdr - dump a volume identifier header.
  * @vid_hdr: the volume identifier header to dump
  */
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 {
 	printk(KERN_DEBUG "Volume identifier header dump:\n");
 	printk(KERN_DEBUG "\tmagic     %08x\n", be32_to_cpu(vid_hdr->magic));
@@ -82,10 +107,10 @@ void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 }
 
 /**
- * ubi_dbg_dump_vol_info- dump volume information.
+ * ubi_dump_vol_info - dump volume information.
  * @vol: UBI volume description object
  */
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
+void ubi_dump_vol_info(const struct ubi_volume *vol)
 {
 	printk(KERN_DEBUG "Volume information dump:\n");
 	printk(KERN_DEBUG "\tvol_id          %d\n", vol->vol_id);
@@ -112,11 +137,11 @@ void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
 }
 
 /**
- * ubi_dbg_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
+ * ubi_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
  * @r: the object to dump
  * @idx: volume table index
  */
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 {
 	int name_len = be16_to_cpu(r->name_len);
 
@@ -146,44 +171,44 @@ void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 }
 
 /**
- * ubi_dbg_dump_sv - dump a &struct ubi_scan_volume object.
- * @sv: the object to dump
+ * ubi_dump_av - dump a &struct ubi_ainf_volume object.
+ * @av: the object to dump
  */
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
+void ubi_dump_av(const struct ubi_ainf_volume *av)
 {
-	printk(KERN_DEBUG "Volume scanning information dump:\n");
-	printk(KERN_DEBUG "\tvol_id         %d\n", sv->vol_id);
-	printk(KERN_DEBUG "\thighest_lnum   %d\n", sv->highest_lnum);
-	printk(KERN_DEBUG "\tleb_count      %d\n", sv->leb_count);
-	printk(KERN_DEBUG "\tcompat         %d\n", sv->compat);
-	printk(KERN_DEBUG "\tvol_type       %d\n", sv->vol_type);
-	printk(KERN_DEBUG "\tused_ebs       %d\n", sv->used_ebs);
-	printk(KERN_DEBUG "\tlast_data_size %d\n", sv->last_data_size);
-	printk(KERN_DEBUG "\tdata_pad       %d\n", sv->data_pad);
+	printk(KERN_DEBUG "Volume attaching information dump:\n");
+	printk(KERN_DEBUG "\tvol_id         %d\n", av->vol_id);
+	printk(KERN_DEBUG "\thighest_lnum   %d\n", av->highest_lnum);
+	printk(KERN_DEBUG "\tleb_count      %d\n", av->leb_count);
+	printk(KERN_DEBUG "\tcompat         %d\n", av->compat);
+	printk(KERN_DEBUG "\tvol_type       %d\n", av->vol_type);
+	printk(KERN_DEBUG "\tused_ebs       %d\n", av->used_ebs);
+	printk(KERN_DEBUG "\tlast_data_size %d\n", av->last_data_size);
+	printk(KERN_DEBUG "\tdata_pad       %d\n", av->data_pad);
 }
 
 /**
- * ubi_dbg_dump_seb - dump a &struct ubi_scan_leb object.
- * @seb: the object to dump
+ * ubi_dump_aeb - dump a &struct ubi_ainf_peb object.
+ * @aeb: the object to dump
  * @type: object type: 0 - not corrupted, 1 - corrupted
  */
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type)
 {
-	printk(KERN_DEBUG "eraseblock scanning information dump:\n");
-	printk(KERN_DEBUG "\tec       %d\n", seb->ec);
-	printk(KERN_DEBUG "\tpnum     %d\n", seb->pnum);
+	printk(KERN_DEBUG "eraseblock attaching information dump:\n");
+	printk(KERN_DEBUG "\tec       %d\n", aeb->ec);
+	printk(KERN_DEBUG "\tpnum     %d\n", aeb->pnum);
 	if (type == 0) {
-		printk(KERN_DEBUG "\tlnum     %d\n", seb->lnum);
-		printk(KERN_DEBUG "\tscrub    %d\n", seb->scrub);
-		printk(KERN_DEBUG "\tsqnum    %llu\n", seb->sqnum);
+		printk(KERN_DEBUG "\tlnum     %d\n", aeb->lnum);
+		printk(KERN_DEBUG "\tscrub    %d\n", aeb->scrub);
+		printk(KERN_DEBUG "\tsqnum    %llu\n", aeb->sqnum);
 	}
 }
 
 /**
- * ubi_dbg_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
+ * ubi_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
  * @req: the object to dump
  */
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req)
 {
 	char nm[17];
 
@@ -199,38 +224,6 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
 	printk(KERN_DEBUG "\t1st 16 characters of name: %s\n", nm);
 }
 
-/**
- * ubi_dbg_dump_flash - dump a region of flash.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to dump
- * @offset: the starting offset within the physical eraseblock to dump
- * @len: the length of the region to dump
- */
-void ubi_dbg_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
-{
-	int err;
-	size_t read;
-	void *buf;
-	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
-
-	buf = vmalloc(len);
-	if (!buf)
-		return;
-	err = mtd_read(ubi->mtd, addr, len, &read, buf);
-	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
-		goto out;
-	}
-
-	dbg_msg("dumping %d bytes of data from PEB %d, offset %d",
-		len, pnum, offset);
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
-out:
-	vfree(buf);
-	return;
-}
-
 /**
  * ubi_debugging_init_dev - initialize debugging for an UBI device.
  * @ubi: UBI device description object
@@ -479,5 +472,3 @@ void ubi_debugfs_exit_dev(struct ubi_device *ubi)
 {
 	debugfs_remove_recursive(ubi->dbg->dfs_dir);
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG */

drivers/mtd/ubi/debug.h

@@ -21,21 +21,20 @@
 #ifndef __UBI_DEBUG_H__
 #define __UBI_DEBUG_H__
 
-#ifdef CONFIG_MTD_UBI_DEBUG
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
+
 #include <linux/random.h>
 
 #define ubi_assert(expr)  do {                                               \
 	if (unlikely(!(expr))) {                                             \
 		printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \
 		       __func__, __LINE__, current->pid);                    \
-		ubi_dbg_dump_stack();                                        \
+		dump_stack();                                                \
 	}                                                                    \
 } while (0)
 
-#define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
-
-#define ubi_dbg_dump_stack() dump_stack()
-
 #define ubi_dbg_print_hex_dump(l, ps, pt, r, g, b, len, a)  \
 		print_hex_dump(l, ps, pt, r, g, b, len, a)
 
@@ -58,17 +57,13 @@
 /* Initialization and build messages */
 #define dbg_bld(fmt, ...) ubi_dbg_msg("bld", fmt, ##__VA_ARGS__)
 
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol);
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
-void ubi_dbg_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
-int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
-int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
-			int offset, int len);
+void ubi_dump_vol_info(const struct ubi_volume *vol);
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
+void ubi_dump_av(const struct ubi_ainf_volume *av);
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type);
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req);
+int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
+			  int len);
 int ubi_debugging_init_dev(struct ubi_device *ubi);
 void ubi_debugging_exit_dev(struct ubi_device *ubi);
 int ubi_debugfs_init(void);
@@ -167,73 +162,4 @@ static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi)
 	return 0;
 }
 
-#else
-
-/* Use "if (0)" to make compiler check arguments even if debugging is off */
-#define ubi_assert(expr)  do {                                               \
-	if (0) {                                                             \
-		printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \
-		       __func__, __LINE__, current->pid);                    \
-	}                                                                    \
-} while (0)
-
-#define dbg_err(fmt, ...) do {                                               \
-	if (0)                                                               \
-		ubi_err(fmt, ##__VA_ARGS__);                                 \
-} while (0)
-
-#define ubi_dbg_msg(fmt, ...) do {                                           \
-	if (0)                                                               \
-		printk(KERN_DEBUG fmt "\n", ##__VA_ARGS__);                  \
-} while (0)
-
-#define dbg_msg(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_gen(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_eba(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_wl(fmt, ...)   ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_io(fmt, ...)   ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_bld(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-
-static inline void ubi_dbg_dump_stack(void)                          { return; }
-static inline void
-ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)                 { return; }
-static inline void
-ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)              { return; }
-static inline void
-ubi_dbg_dump_vol_info(const struct ubi_volume *vol)                  { return; }
-static inline void
-ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)   { return; }
-static inline void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv) { return; }
-static inline void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb,
-				    int type)                        { return; }
-static inline void
-ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)              { return; }
-static inline void ubi_dbg_dump_flash(struct ubi_device *ubi,
-				      int pnum, int offset, int len) { return; }
-static inline void
-ubi_dbg_print_hex_dump(const char *l, const char *ps, int pt, int r,
-		       int g, const void *b, size_t len, bool a)     { return; }
-static inline int ubi_dbg_check_all_ff(struct ubi_device *ubi,
-				       int pnum, int offset,
-				       int len)                    { return 0; }
-static inline int ubi_dbg_check_write(struct ubi_device *ubi,
-				      const void *buf, int pnum,
-				      int offset, int len)         { return 0; }
-
-static inline int ubi_debugging_init_dev(struct ubi_device *ubi)   { return 0; }
-static inline void ubi_debugging_exit_dev(struct ubi_device *ubi)  { return; }
-static inline int ubi_debugfs_init(void)                           { return 0; }
-static inline void ubi_debugfs_exit(void)                          { return; }
-static inline int ubi_debugfs_init_dev(struct ubi_device *ubi)     { return 0; }
-static inline void ubi_debugfs_exit_dev(struct ubi_device *ubi)    { return; }
-
-static inline int
-ubi_dbg_is_bgt_disabled(const struct ubi_device *ubi)              { return 0; }
-static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi) { return 0; }
-static inline int
-ubi_dbg_is_write_failure(const struct ubi_device *ubi)             { return 0; }
-static inline int
-ubi_dbg_is_erase_failure(const struct ubi_device *ubi)             { return 0; }
-
-#endif /* !CONFIG_MTD_UBI_DEBUG */
 #endif /* !__UBI_DEBUG_H__ */

drivers/mtd/ubi/eba.c

@@ -341,7 +341,7 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 	dbg_eba("erase LEB %d:%d, PEB %d", vol_id, lnum, pnum);
 
 	vol->eba_tbl[lnum] = UBI_LEB_UNMAPPED;
-	err = ubi_wl_put_peb(ubi, pnum, 0);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 0);
 
 out_unlock:
 	leb_write_unlock(ubi, vol_id, lnum);
@@ -507,7 +507,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 		return -ENOMEM;
 
 retry:
-	new_pnum = ubi_wl_get_peb(ubi, UBI_UNKNOWN);
+	new_pnum = ubi_wl_get_peb(ubi);
 	if (new_pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return new_pnum;
@@ -550,7 +550,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 	ubi_free_vid_hdr(ubi, vid_hdr);
 
 	vol->eba_tbl[lnum] = new_pnum;
-	ubi_wl_put_peb(ubi, pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 
 	ubi_msg("data was successfully recovered");
 	return 0;
@@ -558,7 +558,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
 out_put:
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -568,7 +568,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 	 * get another one.
 	 */
 	ubi_warn("failed to write to PEB %d", new_pnum);
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	if (++tries > UBI_IO_RETRIES) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return err;
@@ -585,7 +585,6 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
  * @buf: the data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function writes data to logical eraseblock @lnum of a dynamic volume
  * @vol. Returns zero in case of success and a negative error code in case
@@ -593,7 +592,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
  * written to the flash media, but may be some garbage.
  */
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype)
+		      const void *buf, int offset, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -641,7 +640,7 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 	vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -687,7 +686,7 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 	 * eraseblock, so just put it and request a new one. We assume that if
 	 * this physical eraseblock went bad, the erase code will handle that.
 	 */
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -707,7 +706,6 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  * @used_ebs: how many logical eraseblocks will this volume contain
  *
  * This function writes data to logical eraseblock @lnum of static volume
@@ -724,8 +722,7 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
  * code in case of failure.
  */
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs)
+			 int lnum, const void *buf, int len, int used_ebs)
 {
 	int err, pnum, tries = 0, data_size = len, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -763,7 +760,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -807,7 +804,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 		return err;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -827,7 +824,6 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
@@ -839,7 +835,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
  * LEB change may be done at a time. This is ensured by @ubi->alc_mutex.
  */
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype)
+			      int lnum, const void *buf, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -856,7 +852,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 		err = ubi_eba_unmap_leb(ubi, vol, lnum);
 		if (err)
 			return err;
-		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 	}
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
@@ -881,7 +877,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		err = pnum;
 		goto out_leb_unlock;
@@ -905,7 +901,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	}
 
 	if (vol->eba_tbl[lnum] >= 0) {
-		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 0);
+		err = ubi_wl_put_peb(ubi, vol_id, lnum, vol->eba_tbl[lnum], 0);
 		if (err)
 			goto out_leb_unlock;
 	}
@@ -930,7 +926,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 		goto out_leb_unlock;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		goto out_leb_unlock;
@@ -1171,7 +1167,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
  * print_rsvd_warning - warn about not having enough reserved PEBs.
  * @ubi: UBI device description object
  *
- * This is a helper function for 'ubi_eba_init_scan()' which is called when UBI
+ * This is a helper function for 'ubi_eba_init()' which is called when UBI
  * cannot reserve enough PEBs for bad block handling. This function makes a
  * decision whether we have to print a warning or not. The algorithm is as
  * follows:
@@ -1186,13 +1182,13 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
  * reported by real users.
  */
 static void print_rsvd_warning(struct ubi_device *ubi,
-			       struct ubi_scan_info *si)
+			       struct ubi_attach_info *ai)
 {
 	/*
 	 * The 1 << 18 (256KiB) number is picked randomly, just a reasonably
 	 * large number to distinguish between newly flashed and used images.
 	 */
-	if (si->max_sqnum > (1 << 18)) {
+	if (ai->max_sqnum > (1 << 18)) {
 		int min = ubi->beb_rsvd_level / 10;
 
 		if (!min)
@@ -1209,19 +1205,19 @@ static void print_rsvd_warning(struct ubi_device *ubi,
 }
 
 /**
- * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
+ * ubi_eba_init - initialize the EBA sub-system using attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int i, j, err, num_volumes;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	struct rb_node *rb;
 
 	dbg_eba("initialize EBA sub-system");
@@ -1230,7 +1226,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 	mutex_init(&ubi->alc_mutex);
 	ubi->ltree = RB_ROOT;
 
-	ubi->global_sqnum = si->max_sqnum + 1;
+	ubi->global_sqnum = ai->max_sqnum + 1;
 	num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
 
 	for (i = 0; i < num_volumes; i++) {
@@ -1250,18 +1246,18 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		for (j = 0; j < vol->reserved_pebs; j++)
 			vol->eba_tbl[j] = UBI_LEB_UNMAPPED;
 
-		sv = ubi_scan_find_sv(si, idx2vol_id(ubi, i));
-		if (!sv)
+		av = ubi_find_av(ai, idx2vol_id(ubi, i));
+		if (!av)
 			continue;
 
-		ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-			if (seb->lnum >= vol->reserved_pebs)
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+			if (aeb->lnum >= vol->reserved_pebs)
 				/*
 				 * This may happen in case of an unclean reboot
 				 * during re-size.
 				 */
-				ubi_scan_move_to_list(sv, seb, &si->erase);
-			vol->eba_tbl[seb->lnum] = seb->pnum;
+				ubi_move_aeb_to_list(av, aeb, &ai->erase);
+			vol->eba_tbl[aeb->lnum] = aeb->pnum;
 		}
 	}
 
@@ -1283,7 +1279,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		if (ubi->avail_pebs < ubi->beb_rsvd_level) {
 			/* No enough free physical eraseblocks */
 			ubi->beb_rsvd_pebs = ubi->avail_pebs;
-			print_rsvd_warning(ubi, si);
+			print_rsvd_warning(ubi, ai);
 		} else
 			ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
 

drivers/mtd/ubi/gluebi.c

@@ -227,7 +227,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
 		if (to_write > total_written)
 			to_write = total_written;
 
-		err = ubi_write(gluebi->desc, lnum, buf, offs, to_write);
+		err = ubi_leb_write(gluebi->desc, lnum, buf, offs, to_write);
 		if (err)
 			break;
 

drivers/mtd/ubi/kapi.c

@@ -221,7 +221,7 @@ struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode)
 	kfree(desc);
 out_put_ubi:
 	ubi_put_device(ubi);
-	dbg_err("cannot open device %d, volume %d, error %d",
+	ubi_err("cannot open device %d, volume %d, error %d",
 		ubi_num, vol_id, err);
 	return ERR_PTR(err);
 }
@@ -426,11 +426,9 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * @buf: data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function writes @len bytes of data from @buf to offset @offset of
- * logical eraseblock @lnum. The @dtype argument describes expected lifetime of
- * the data.
+ * logical eraseblock @lnum.
  *
  * This function takes care of physical eraseblock write failures. If write to
  * the physical eraseblock write operation fails, the logical eraseblock is
@@ -447,7 +445,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * returns immediately with %-EBADF code.
  */
 int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		  int offset, int len, int dtype)
+		  int offset, int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -466,17 +464,13 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_write);
 
@@ -486,7 +480,6 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  * @lnum: logical eraseblock number to change
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
@@ -497,7 +490,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  * code in case of failure.
  */
 int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		   int len, int dtype)
+		   int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -515,17 +508,13 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len, dtype);
+	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_change);
 
@@ -562,7 +551,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
 	if (err)
 		return err;
 
-	return ubi_wl_flush(ubi);
+	return ubi_wl_flush(ubi, vol->vol_id, lnum);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_erase);
 
@@ -626,7 +615,6 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap);
  * ubi_leb_map - map logical eraseblock to a physical eraseblock.
  * @desc: volume descriptor
  * @lnum: logical eraseblock number
- * @dtype: expected data type
  *
  * This function maps an un-mapped logical eraseblock @lnum to a physical
  * eraseblock. This means, that after a successful invocation of this
@@ -639,7 +627,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap);
  * eraseblock is already mapped, and other negative error codes in case of
  * other failures.
  */
-int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -652,17 +640,13 @@ int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
 	if (lnum < 0 || lnum >= vol->reserved_pebs)
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (vol->eba_tbl[lnum] >= 0)
 		return -EBADMSG;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_map);
 
@@ -720,6 +704,33 @@ int ubi_sync(int ubi_num)
 }
 EXPORT_SYMBOL_GPL(ubi_sync);
 
+/**
+ * ubi_flush - flush UBI work queue.
+ * @ubi_num: UBI device to flush work queue
+ * @vol_id: volume id to flush for
+ * @lnum: logical eraseblock number to flush for
+ *
+ * This function executes all pending works for a particular volume id / logical
+ * eraseblock number pair. If either value is set to %UBI_ALL, then it acts as
+ * a wildcard for all of the corresponding volume numbers or logical
+ * eraseblock numbers. It returns zero in case of success and a negative error
+ * code in case of failure.
+ */
+int ubi_flush(int ubi_num, int vol_id, int lnum)
+{
+	struct ubi_device *ubi;
+	int err = 0;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	err = ubi_wl_flush(ubi, vol_id, lnum);
+	ubi_put_device(ubi);
+	return err;
+}
+EXPORT_SYMBOL_GPL(ubi_flush);
+
 BLOCKING_NOTIFIER_HEAD(ubi_notifiers);
 
 /**

drivers/mtd/ubi/scan.h

-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-#ifndef __UBI_SCAN_H__
-#define __UBI_SCAN_H__
-
-/* The erase counter value for this physical eraseblock is unknown */
-#define UBI_SCAN_UNKNOWN_EC (-1)
-
-/**
- * struct ubi_scan_leb - scanning information about a physical eraseblock.
- * @ec: erase counter (%UBI_SCAN_UNKNOWN_EC if it is unknown)
- * @pnum: physical eraseblock number
- * @lnum: logical eraseblock number
- * @scrub: if this physical eraseblock needs scrubbing
- * @copy_flag: this LEB is a copy (@copy_flag is set in VID header of this LEB)
- * @sqnum: sequence number
- * @u: unions RB-tree or @list links
- * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects
- * @u.list: link in one of the eraseblock lists
- *
- * One object of this type is allocated for each physical eraseblock during
- * scanning.
- */
-struct ubi_scan_leb {
-	int ec;
-	int pnum;
-	int lnum;
-	unsigned int scrub:1;
-	unsigned int copy_flag:1;
-	unsigned long long sqnum;
-	union {
-		struct rb_node rb;
-		struct list_head list;
-	} u;
-};
-
-/**
- * struct ubi_scan_volume - scanning information about a volume.
- * @vol_id: volume ID
- * @highest_lnum: highest logical eraseblock number in this volume
- * @leb_count: number of logical eraseblocks in this volume
- * @vol_type: volume type
- * @used_ebs: number of used logical eraseblocks in this volume (only for
- *            static volumes)
- * @last_data_size: amount of data in the last logical eraseblock of this
- *                  volume (always equivalent to the usable logical eraseblock
- *                  size in case of dynamic volumes)
- * @data_pad: how many bytes at the end of logical eraseblocks of this volume
- *            are not used (due to volume alignment)
- * @compat: compatibility flags of this volume
- * @rb: link in the volume RB-tree
- * @root: root of the RB-tree containing all the eraseblock belonging to this
- *        volume (&struct ubi_scan_leb objects)
- *
- * One object of this type is allocated for each volume during scanning.
- */
-struct ubi_scan_volume {
-	int vol_id;
-	int highest_lnum;
-	int leb_count;
-	int vol_type;
-	int used_ebs;
-	int last_data_size;
-	int data_pad;
-	int compat;
-	struct rb_node rb;
-	struct rb_root root;
-};
-
-/**
- * struct ubi_scan_info - UBI scanning information.
- * @volumes: root of the volume RB-tree
- * @corr: list of corrupted physical eraseblocks
- * @free: list of free physical eraseblocks
- * @erase: list of physical eraseblocks which have to be erased
- * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
- *         those belonging to "preserve"-compatible internal volumes)
- * @corr_peb_count: count of PEBs in the @corr list
- * @empty_peb_count: count of PEBs which are presumably empty (contain only
- *                   0xFF bytes)
- * @alien_peb_count: count of PEBs in the @alien list
- * @bad_peb_count: count of bad physical eraseblocks
- * @maybe_bad_peb_count: count of bad physical eraseblocks which are not marked
- *                       as bad yet, but which look like bad
- * @vols_found: number of volumes found during scanning
- * @highest_vol_id: highest volume ID
- * @is_empty: flag indicating whether the MTD device is empty or not
- * @min_ec: lowest erase counter value
- * @max_ec: highest erase counter value
- * @max_sqnum: highest sequence number value
- * @mean_ec: mean erase counter value
- * @ec_sum: a temporary variable used when calculating @mean_ec
- * @ec_count: a temporary variable used when calculating @mean_ec
- * @scan_leb_slab: slab cache for &struct ubi_scan_leb objects
- *
- * This data structure contains the result of scanning and may be used by other
- * UBI sub-systems to build final UBI data structures, further error-recovery
- * and so on.
- */
-struct ubi_scan_info {
-	struct rb_root volumes;
-	struct list_head corr;
-	struct list_head free;
-	struct list_head erase;
-	struct list_head alien;
-	int corr_peb_count;
-	int empty_peb_count;
-	int alien_peb_count;
-	int bad_peb_count;
-	int maybe_bad_peb_count;
-	int vols_found;
-	int highest_vol_id;
-	int is_empty;
-	int min_ec;
-	int max_ec;
-	unsigned long long max_sqnum;
-	int mean_ec;
-	uint64_t ec_sum;
-	int ec_count;
-	struct kmem_cache *scan_leb_slab;
-};
-
-struct ubi_device;
-struct ubi_vid_hdr;
-
-/*
- * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
- *
- * @sv: volume scanning information
- * @seb: scanning eraseblock information
- * @list: the list to move to
- */
-static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv,
-					 struct ubi_scan_leb *seb,
-					 struct list_head *list)
-{
-		rb_erase(&seb->u.rb, &sv->root);
-		list_add_tail(&seb->u.list, list);
-}
-
-int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
-		      int bitflips);
-struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
-					 int vol_id);
-struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
-				       int lnum);
-void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv);
-struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
-					   struct ubi_scan_info *si);
-int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
-		       int pnum, int ec);
-struct ubi_scan_info *ubi_scan(struct ubi_device *ubi);
-void ubi_scan_destroy_si(struct ubi_scan_info *si);
-
-#endif /* !__UBI_SCAN_H__ */

drivers/mtd/ubi/ubi-media.h

@@ -149,10 +149,10 @@ enum {
  * The @image_seq field is used to validate a UBI image that has been prepared
  * for a UBI device. The @image_seq value can be any value, but it must be the
  * same on all eraseblocks. UBI will ensure that all new erase counter headers
- * also contain this value, and will check the value when scanning at start-up.
+ * also contain this value, and will check the value when attaching the flash.
  * One way to make use of @image_seq is to increase its value by one every time
  * an image is flashed over an existing image, then, if the flashing does not
- * complete, UBI will detect the error when scanning.
+ * complete, UBI will detect the error when attaching the media.
  */
 struct ubi_ec_hdr {
 	__be32  magic;
@@ -298,8 +298,8 @@ struct ubi_vid_hdr {
 #define UBI_INT_VOL_COUNT 1
 
 /*
- * Starting ID of internal volumes. There is reserved room for 4096 internal
- * volumes.
+ * Starting ID of internal volumes: 0x7fffefff.
+ * There is reserved room for 4096 internal volumes.
  */
 #define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
 

drivers/mtd/ubi/ubi.h

@@ -43,7 +43,6 @@
 #include <asm/pgtable.h>
 
 #include "ubi-media.h"
-#include "scan.h"
 
 /* Maximum number of supported UBI devices */
 #define UBI_MAX_DEVICES 32
@@ -66,7 +65,10 @@
 /* Background thread name pattern */
 #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd"
 
-/* This marker in the EBA table means that the LEB is um-mapped */
+/*
+ * This marker in the EBA table means that the LEB is um-mapped.
+ * NOTE! It has to have the same value as %UBI_ALL.
+ */
 #define UBI_LEB_UNMAPPED -1
 
 /*
@@ -82,6 +84,9 @@
  */
 #define UBI_PROT_QUEUE_LEN 10
 
+/* The volume ID/LEB number/erase counter is unknown */
+#define UBI_UNKNOWN -1
+
 /*
  * Error codes returned by the I/O sub-system.
  *
@@ -222,8 +227,6 @@ struct ubi_volume_desc;
  * @upd_ebs: how many eraseblocks are expected to be updated
  * @ch_lnum: LEB number which is being changing by the atomic LEB change
  *           operation
- * @ch_dtype: data persistency type which is being changing by the atomic LEB
- *            change operation
  * @upd_bytes: how many bytes are expected to be received for volume update or
  *             atomic LEB change
  * @upd_received: how many bytes were already received for volume update or
@@ -270,7 +273,6 @@ struct ubi_volume {
 
 	int upd_ebs;
 	int ch_lnum;
-	int ch_dtype;
 	long long upd_bytes;
 	long long upd_received;
 	void *upd_buf;
@@ -477,6 +479,124 @@ struct ubi_device {
 	struct ubi_debug_info *dbg;
 };
 
+/**
+ * struct ubi_ainf_peb - attach information about a physical eraseblock.
+ * @ec: erase counter (%UBI_UNKNOWN if it is unknown)
+ * @pnum: physical eraseblock number
+ * @vol_id: ID of the volume this LEB belongs to
+ * @lnum: logical eraseblock number
+ * @scrub: if this physical eraseblock needs scrubbing
+ * @copy_flag: this LEB is a copy (@copy_flag is set in VID header of this LEB)
+ * @sqnum: sequence number
+ * @u: unions RB-tree or @list links
+ * @u.rb: link in the per-volume RB-tree of &struct ubi_ainf_peb objects
+ * @u.list: link in one of the eraseblock lists
+ *
+ * One object of this type is allocated for each physical eraseblock when
+ * attaching an MTD device. Note, if this PEB does not belong to any LEB /
+ * volume, the @vol_id and @lnum fields are initialized to %UBI_UNKNOWN.
+ */
+struct ubi_ainf_peb {
+	int ec;
+	int pnum;
+	int vol_id;
+	int lnum;
+	unsigned int scrub:1;
+	unsigned int copy_flag:1;
+	unsigned long long sqnum;
+	union {
+		struct rb_node rb;
+		struct list_head list;
+	} u;
+};
+
+/**
+ * struct ubi_ainf_volume - attaching information about a volume.
+ * @vol_id: volume ID
+ * @highest_lnum: highest logical eraseblock number in this volume
+ * @leb_count: number of logical eraseblocks in this volume
+ * @vol_type: volume type
+ * @used_ebs: number of used logical eraseblocks in this volume (only for
+ *            static volumes)
+ * @last_data_size: amount of data in the last logical eraseblock of this
+ *                  volume (always equivalent to the usable logical eraseblock
+ *                  size in case of dynamic volumes)
+ * @data_pad: how many bytes at the end of logical eraseblocks of this volume
+ *            are not used (due to volume alignment)
+ * @compat: compatibility flags of this volume
+ * @rb: link in the volume RB-tree
+ * @root: root of the RB-tree containing all the eraseblock belonging to this
+ *        volume (&struct ubi_ainf_peb objects)
+ *
+ * One object of this type is allocated for each volume when attaching an MTD
+ * device.
+ */
+struct ubi_ainf_volume {
+	int vol_id;
+	int highest_lnum;
+	int leb_count;
+	int vol_type;
+	int used_ebs;
+	int last_data_size;
+	int data_pad;
+	int compat;
+	struct rb_node rb;
+	struct rb_root root;
+};
+
+/**
+ * struct ubi_attach_info - MTD device attaching information.
+ * @volumes: root of the volume RB-tree
+ * @corr: list of corrupted physical eraseblocks
+ * @free: list of free physical eraseblocks
+ * @erase: list of physical eraseblocks which have to be erased
+ * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
+ *         those belonging to "preserve"-compatible internal volumes)
+ * @corr_peb_count: count of PEBs in the @corr list
+ * @empty_peb_count: count of PEBs which are presumably empty (contain only
+ *                   0xFF bytes)
+ * @alien_peb_count: count of PEBs in the @alien list
+ * @bad_peb_count: count of bad physical eraseblocks
+ * @maybe_bad_peb_count: count of bad physical eraseblocks which are not marked
+ *                       as bad yet, but which look like bad
+ * @vols_found: number of volumes found
+ * @highest_vol_id: highest volume ID
+ * @is_empty: flag indicating whether the MTD device is empty or not
+ * @min_ec: lowest erase counter value
+ * @max_ec: highest erase counter value
+ * @max_sqnum: highest sequence number value
+ * @mean_ec: mean erase counter value
+ * @ec_sum: a temporary variable used when calculating @mean_ec
+ * @ec_count: a temporary variable used when calculating @mean_ec
+ * @aeb_slab_cache: slab cache for &struct ubi_ainf_peb objects
+ *
+ * This data structure contains the result of attaching an MTD device and may
+ * be used by other UBI sub-systems to build final UBI data structures, further
+ * error-recovery and so on.
+ */
+struct ubi_attach_info {
+	struct rb_root volumes;
+	struct list_head corr;
+	struct list_head free;
+	struct list_head erase;
+	struct list_head alien;
+	int corr_peb_count;
+	int empty_peb_count;
+	int alien_peb_count;
+	int bad_peb_count;
+	int maybe_bad_peb_count;
+	int vols_found;
+	int highest_vol_id;
+	int is_empty;
+	int min_ec;
+	int max_ec;
+	unsigned long long max_sqnum;
+	int mean_ec;
+	uint64_t ec_sum;
+	int ec_count;
+	struct kmem_cache *aeb_slab_cache;
+};
+
 #include "debug.h"
 
 extern struct kmem_cache *ubi_wl_entry_slab;
@@ -487,12 +607,23 @@ extern struct class *ubi_class;
 extern struct mutex ubi_devices_mutex;
 extern struct blocking_notifier_head ubi_notifiers;
 
+/* scan.c */
+int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+		  int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
+struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
+				    int vol_id);
+void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av);
+struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
+				       struct ubi_attach_info *ai);
+int ubi_attach(struct ubi_device *ubi);
+void ubi_destroy_ai(struct ubi_attach_info *ai);
+
 /* vtbl.c */
 int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			   struct ubi_vtbl_record *vtbl_rec);
 int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
 			    struct list_head *rename_list);
-int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai);
 
 /* vmt.c */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req);
@@ -525,22 +656,22 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		     void *buf, int offset, int len, int check);
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype);
+		      const void *buf, int offset, int len);
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs);
+			 int lnum, const void *buf, int len, int used_ebs);
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype);
+			      int lnum, const void *buf, int len);
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		     struct ubi_vid_hdr *vid_hdr);
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
 
 /* wl.c */
-int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture);
-int ubi_wl_flush(struct ubi_device *ubi);
+int ubi_wl_get_peb(struct ubi_device *ubi);
+int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum,
+		   int pnum, int torture);
+int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum);
 int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum);
-int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
 void ubi_wl_close(struct ubi_device *ubi);
 int ubi_thread(void *u);
 
@@ -573,6 +704,7 @@ int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_notify_all(struct ubi_device *ubi, int ntype,
 		   struct notifier_block *nb);
 int ubi_enumerate_volumes(struct notifier_block *nb);
+void ubi_free_internal_volumes(struct ubi_device *ubi);
 
 /* kapi.c */
 void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di);
@@ -593,6 +725,21 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
 	     rb = rb_next(rb),                                               \
 	     pos = (rb ? container_of(rb, typeof(*pos), member) : NULL))
 
+/*
+ * ubi_move_aeb_to_list - move a PEB from the volume tree to a list.
+ *
+ * @av: volume attaching information
+ * @aeb: attaching eraseblock information
+ * @list: the list to move to
+ */
+static inline void ubi_move_aeb_to_list(struct ubi_ainf_volume *av,
+					 struct ubi_ainf_peb *aeb,
+					 struct list_head *list)
+{
+		rb_erase(&aeb->u.rb, &av->root);
+		list_add_tail(&aeb->u.list, list);
+}
+
 /**
  * ubi_zalloc_vid_hdr - allocate a volume identifier header object.
  * @ubi: UBI device description object
@@ -667,7 +814,7 @@ static inline void ubi_ro_mode(struct ubi_device *ubi)
 	if (!ubi->ro_mode) {
 		ubi->ro_mode = 1;
 		ubi_warn("switch to read-only mode");
-		ubi_dbg_dump_stack();
+		dump_stack();
 	}
 }
 

drivers/mtd/ubi/upd.c

@@ -147,7 +147,7 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 	}
 
 	if (bytes == 0) {
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		if (err)
 			return err;
 
@@ -186,14 +186,12 @@ int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	dbg_gen("start changing LEB %d:%d, %u bytes",
 		vol->vol_id, req->lnum, req->bytes);
 	if (req->bytes == 0)
-		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
-						 req->dtype);
+		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0);
 
 	vol->upd_bytes = req->bytes;
 	vol->upd_received = 0;
 	vol->changing_leb = 1;
 	vol->ch_lnum = req->lnum;
-	vol->ch_dtype = req->dtype;
 
 	vol->upd_buf = vmalloc(req->bytes);
 	if (!vol->upd_buf)
@@ -246,8 +244,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 			return 0;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len,
-					UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len);
 	} else {
 		/*
 		 * When writing static volume, and this is the last logical
@@ -259,8 +256,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		 * contain zeros, not random trash.
 		 */
 		memset(buf + len, 0, vol->usable_leb_size - len);
-		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len,
-					   UBI_UNKNOWN, used_ebs);
+		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len, used_ebs);
 	}
 
 	return err;
@@ -365,7 +361,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	ubi_assert(vol->upd_received <= vol->upd_bytes);
 	if (vol->upd_received == vol->upd_bytes) {
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		if (err)
 			return err;
 		/* The update is finished, clear the update marker */
@@ -421,7 +417,7 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 		       len - vol->upd_bytes);
 		len = ubi_calc_data_len(ubi, vol->upd_buf, len);
 		err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
-						vol->upd_buf, len, UBI_UNKNOWN);
+						vol->upd_buf, len);
 		if (err)
 			return err;
 	}

drivers/mtd/ubi/vmt.c

@@ -29,11 +29,7 @@
 #include <linux/export.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-static int paranoid_check_volumes(struct ubi_device *ubi);
-#else
-#define paranoid_check_volumes(ubi) 0
-#endif
+static int self_check_volumes(struct ubi_device *ubi);
 
 static ssize_t vol_attribute_show(struct device *dev,
 				  struct device_attribute *attr, char *buf);
@@ -227,7 +223,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 			}
 
 		if (vol_id == UBI_VOL_NUM_AUTO) {
-			dbg_err("out of volume IDs");
+			ubi_err("out of volume IDs");
 			err = -ENFILE;
 			goto out_unlock;
 		}
@@ -241,7 +237,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	/* Ensure that this volume does not exist */
 	err = -EEXIST;
 	if (ubi->volumes[vol_id]) {
-		dbg_err("volume %d already exists", vol_id);
+		ubi_err("volume %d already exists", vol_id);
 		goto out_unlock;
 	}
 
@@ -250,7 +246,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		if (ubi->volumes[i] &&
 		    ubi->volumes[i]->name_len == req->name_len &&
 		    !strcmp(ubi->volumes[i]->name, req->name)) {
-			dbg_err("volume \"%s\" exists (ID %d)", req->name, i);
+			ubi_err("volume \"%s\" exists (ID %d)", req->name, i);
 			goto out_unlock;
 		}
 
@@ -261,9 +257,9 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 
 	/* Reserve physical eraseblocks */
 	if (vol->reserved_pebs > ubi->avail_pebs) {
-		dbg_err("not enough PEBs, only %d available", ubi->avail_pebs);
+		ubi_err("not enough PEBs, only %d available", ubi->avail_pebs);
 		if (ubi->corr_peb_count)
-			dbg_err("%d PEBs are corrupted and not used",
+			ubi_err("%d PEBs are corrupted and not used",
 				ubi->corr_peb_count);
 		err = -ENOSPC;
 		goto out_unlock;
@@ -284,7 +280,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	 * Finish all pending erases because there may be some LEBs belonging
 	 * to the same volume ID.
 	 */
-	err = ubi_wl_flush(ubi);
+	err = ubi_wl_flush(ubi, vol_id, UBI_ALL);
 	if (err)
 		goto out_acc;
 
@@ -360,8 +356,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	spin_unlock(&ubi->volumes_lock);
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_ADDED);
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while creating volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_sysfs:
@@ -461,8 +456,8 @@ int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl)
 	spin_unlock(&ubi->volumes_lock);
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_REMOVED);
-	if (!no_vtbl && paranoid_check_volumes(ubi))
-		dbg_err("check failed while removing volume %d", vol_id);
+	if (!no_vtbl)
+		self_check_volumes(ubi);
 
 	return err;
 
@@ -500,7 +495,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 
 	if (vol->vol_type == UBI_STATIC_VOLUME &&
 	    reserved_pebs < vol->used_ebs) {
-		dbg_err("too small size %d, %d LEBs contain data",
+		ubi_err("too small size %d, %d LEBs contain data",
 			reserved_pebs, vol->used_ebs);
 		return -EINVAL;
 	}
@@ -529,10 +524,10 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	if (pebs > 0) {
 		spin_lock(&ubi->volumes_lock);
 		if (pebs > ubi->avail_pebs) {
-			dbg_err("not enough PEBs: requested %d, available %d",
+			ubi_err("not enough PEBs: requested %d, available %d",
 				pebs, ubi->avail_pebs);
 			if (ubi->corr_peb_count)
-				dbg_err("%d PEBs are corrupted and not used",
+				ubi_err("%d PEBs are corrupted and not used",
 					ubi->corr_peb_count);
 			spin_unlock(&ubi->volumes_lock);
 			err = -ENOSPC;
@@ -588,8 +583,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	}
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_RESIZED);
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while re-sizing volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_acc:
@@ -638,8 +632,8 @@ int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
 		}
 	}
 
-	if (!err && paranoid_check_volumes(ubi))
-		;
+	if (!err)
+		self_check_volumes(ubi);
 	return err;
 }
 
@@ -686,8 +680,7 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 		return err;
 	}
 
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while adding volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_cdev:
@@ -712,16 +705,14 @@ void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 	volume_sysfs_close(vol);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 /**
- * paranoid_check_volume - check volume information.
+ * self_check_volume - check volume information.
  * @ubi: UBI device description object
  * @vol_id: volume ID
  *
  * Returns zero if volume is all right and a a negative error code if not.
  */
-static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
+static int self_check_volume(struct ubi_device *ubi, int vol_id)
 {
 	int idx = vol_id2idx(ubi, vol_id);
 	int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
@@ -771,7 +762,7 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	}
 
 	if (vol->upd_marker && vol->corrupted) {
-		dbg_err("update marker and corrupted simultaneously");
+		ubi_err("update marker and corrupted simultaneously");
 		goto fail;
 	}
 
@@ -853,22 +844,22 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	return 0;
 
 fail:
-	ubi_err("paranoid check failed for volume %d", vol_id);
+	ubi_err("self-check failed for volume %d", vol_id);
 	if (vol)
-		ubi_dbg_dump_vol_info(vol);
-	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+		ubi_dump_vol_info(vol);
+	ubi_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
 	dump_stack();
 	spin_unlock(&ubi->volumes_lock);
 	return -EINVAL;
 }
 
 /**
- * paranoid_check_volumes - check information about all volumes.
+ * self_check_volumes - check information about all volumes.
  * @ubi: UBI device description object
  *
  * Returns zero if volumes are all right and a a negative error code if not.
  */
-static int paranoid_check_volumes(struct ubi_device *ubi)
+static int self_check_volumes(struct ubi_device *ubi)
 {
 	int i, err = 0;
 
@@ -876,11 +867,10 @@ static int paranoid_check_volumes(struct ubi_device *ubi)
 		return 0;
 
 	for (i = 0; i < ubi->vtbl_slots; i++) {
-		err = paranoid_check_volume(ubi, i);
+		err = self_check_volume(ubi, i);
 		if (err)
 			break;
 	}
 
 	return err;
 }
-#endif

fs/ubifs/Kconfig

@@ -11,12 +11,6 @@ config UBIFS_FS
 	help
 	  UBIFS is a file system for flash devices which works on top of UBI.
 
-config UBIFS_FS_XATTR
-	bool "Extended attributes support"
-	depends on UBIFS_FS
-	help
-	  This option enables support of extended attributes.
-
 config UBIFS_FS_ADVANCED_COMPR
 	bool "Advanced compression options"
 	depends on UBIFS_FS
@@ -41,20 +35,3 @@ config UBIFS_FS_ZLIB
 	default y
 	help
 	  Zlib compresses better than LZO but it is slower. Say 'Y' if unsure.
-
-# Debugging-related stuff
-config UBIFS_FS_DEBUG
-	bool "Enable debugging support"
-	depends on UBIFS_FS
-	select DEBUG_FS
-	select KALLSYMS
-	help
-	  This option enables UBIFS debugging support. It makes sure various
-	  assertions, self-checks, debugging messages and test modes are compiled
-	  in (this all is compiled out otherwise). Assertions are light-weight
-	  and this option also enables them. Self-checks, debugging messages and
-	  test modes are switched off by default. Thus, it is safe and actually
-	  recommended to have debugging support enabled, and it should not slow
-	  down UBIFS. You can then further enable / disable individual  debugging
-	  features using UBIFS module parameters and the corresponding sysfs
-	  interfaces.

fs/ubifs/Makefile

@@ -3,7 +3,4 @@ obj-$(CONFIG_UBIFS_FS) += ubifs.o
 ubifs-y += shrinker.o journal.o file.o dir.o super.o sb.o io.o
 ubifs-y += tnc.o master.o scan.o replay.o log.o commit.o gc.o orphan.o
 ubifs-y += budget.o find.o tnc_commit.o compress.o lpt.o lprops.o
-ubifs-y += recovery.o ioctl.o lpt_commit.o tnc_misc.o
-
-ubifs-$(CONFIG_UBIFS_FS_DEBUG) += debug.o
-ubifs-$(CONFIG_UBIFS_FS_XATTR) += xattr.o
+ubifs-y += recovery.o ioctl.o lpt_commit.o tnc_misc.o xattr.o debug.o

fs/ubifs/commit.c

@@ -496,7 +496,9 @@ int ubifs_gc_should_commit(struct ubifs_info *c)
 	return ret;
 }
 
-#ifdef CONFIG_UBIFS_FS_DEBUG
+/*
+ * Everything below is related to debugging.
+ */
 
 /**
  * struct idx_node - hold index nodes during index tree traversal.
@@ -714,14 +716,14 @@ int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot)
 	return 0;
 
 out_dump:
-	dbg_err("dumping index node (iip=%d)", i->iip);
-	dbg_dump_node(c, idx);
+	ubifs_err("dumping index node (iip=%d)", i->iip);
+	ubifs_dump_node(c, idx);
 	list_del(&i->list);
 	kfree(i);
 	if (!list_empty(&list)) {
 		i = list_entry(list.prev, struct idx_node, list);
-		dbg_err("dumping parent index node");
-		dbg_dump_node(c, &i->idx);
+		ubifs_err("dumping parent index node");
+		ubifs_dump_node(c, &i->idx);
 	}
 out_free:
 	while (!list_empty(&list)) {
@@ -734,5 +736,3 @@ int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot)
 		err = -EINVAL;
 	return err;
 }
-
-#endif /* CONFIG_UBIFS_FS_DEBUG */

fs/ubifs/dir.c

@@ -170,8 +170,6 @@ struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir,
 	return inode;
 }
 
-#ifdef CONFIG_UBIFS_FS_DEBUG
-
 static int dbg_check_name(const struct ubifs_info *c,
 			  const struct ubifs_dent_node *dent,
 			  const struct qstr *nm)
@@ -185,12 +183,6 @@ static int dbg_check_name(const struct ubifs_info *c,
 	return 0;
 }
 
-#else
-
-#define dbg_check_name(c, dent, nm) 0
-
-#endif
-
 static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry,
 				   struct nameidata *nd)
 {
@@ -1187,12 +1179,10 @@ const struct inode_operations ubifs_dir_inode_operations = {
 	.rename      = ubifs_rename,
 	.setattr     = ubifs_setattr,
 	.getattr     = ubifs_getattr,
-#ifdef CONFIG_UBIFS_FS_XATTR
 	.setxattr    = ubifs_setxattr,
 	.getxattr    = ubifs_getxattr,
 	.listxattr   = ubifs_listxattr,
 	.removexattr = ubifs_removexattr,
-#endif
 };
 
 const struct file_operations ubifs_dir_operations = {

fs/ubifs/file.c

@@ -97,7 +97,7 @@ static int read_block(struct inode *inode, void *addr, unsigned int block,
 dump:
 	ubifs_err("bad data node (block %u, inode %lu)",
 		  block, inode->i_ino);
-	dbg_dump_node(c, dn);
+	ubifs_dump_node(c, dn);
 	return -EINVAL;
 }
 
@@ -1562,12 +1562,10 @@ const struct address_space_operations ubifs_file_address_operations = {
 const struct inode_operations ubifs_file_inode_operations = {
 	.setattr     = ubifs_setattr,
 	.getattr     = ubifs_getattr,
-#ifdef CONFIG_UBIFS_FS_XATTR
 	.setxattr    = ubifs_setxattr,
 	.getxattr    = ubifs_getxattr,
 	.listxattr   = ubifs_listxattr,
 	.removexattr = ubifs_removexattr,
-#endif
 };
 
 const struct inode_operations ubifs_symlink_inode_operations = {

fs/ubifs/gc.c

@@ -109,7 +109,7 @@ static int switch_gc_head(struct ubifs_info *c)
 		return err;
 
 	c->gc_lnum = -1;
-	err = ubifs_wbuf_seek_nolock(wbuf, gc_lnum, 0, UBI_LONGTERM);
+	err = ubifs_wbuf_seek_nolock(wbuf, gc_lnum, 0);
 	return err;
 }
 

fs/ubifs/xattr.c

@@ -399,8 +399,8 @@ ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf,
 	if (buf) {
 		/* If @buf is %NULL we are supposed to return the length */
 		if (ui->data_len > size) {
-			dbg_err("buffer size %zd, xattr len %d",
-				size, ui->data_len);
+			ubifs_err("buffer size %zd, xattr len %d",
+				  size, ui->data_len);
 			err = -ERANGE;
 			goto out_iput;
 		}