Merge branch 'dsa-suspend'

Florian Fainelli says:

====================
dsa: Broadcom SF2 suspend/resume and WoL

This patch add supports for suspend/resume and configuring Wake-on-LAN
for Broadcom Starfighter 2 switches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/bcm_sf2.c

@@ -22,6 +22,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <net/dsa.h>
+#include <linux/ethtool.h>
 
 #include "bcm_sf2.h"
 #include "bcm_sf2_regs.h"
@@ -242,6 +243,9 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port)
 	struct bcm_sf2_priv *priv = ds_to_priv(ds);
 	u32 off, reg;
 
+	if (priv->wol_ports_mask & (1 << port))
+		return;
+
 	if (dsa_is_cpu_port(ds, port))
 		off = CORE_IMP_CTL;
 	else
@@ -606,6 +610,141 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
 		status->pause = 1;
 }
 
+static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int port;
+
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_0_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
+	intrl2_1_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
+	intrl2_1_writel(priv, 0, INTRL2_CPU_MASK_CLEAR);
+
+	/* Disable all ports physically present including the IMP
+	 * port, the other ones have already been disabled during
+	 * bcm_sf2_sw_setup
+	 */
+	for (port = 0; port < DSA_MAX_PORTS; port++) {
+		if ((1 << port) & ds->phys_port_mask ||
+		    dsa_is_cpu_port(ds, port))
+			bcm_sf2_port_disable(ds, port);
+	}
+
+	return 0;
+}
+
+static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
+{
+	unsigned int timeout = 1000;
+	u32 reg;
+
+	reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+	reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET;
+	core_writel(priv, reg, CORE_WATCHDOG_CTRL);
+
+	do {
+		reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+		if (!(reg & SOFTWARE_RESET))
+			break;
+
+		usleep_range(1000, 2000);
+	} while (timeout-- > 0);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int bcm_sf2_sw_resume(struct dsa_switch *ds)
+{
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	unsigned int port;
+	u32 reg;
+	int ret;
+
+	ret = bcm_sf2_sw_rst(priv);
+	if (ret) {
+		pr_err("%s: failed to software reset switch\n", __func__);
+		return ret;
+	}
+
+	/* Reinitialize the single GPHY */
+	if (priv->hw_params.num_gphy == 1) {
+		reg = reg_readl(priv, REG_SPHY_CNTRL);
+		reg |= PHY_RESET;
+		reg &= ~(EXT_PWR_DOWN | IDDQ_BIAS);
+		reg_writel(priv, reg, REG_SPHY_CNTRL);
+		udelay(21);
+		reg = reg_readl(priv, REG_SPHY_CNTRL);
+		reg &= ~PHY_RESET;
+		reg_writel(priv, reg, REG_SPHY_CNTRL);
+	}
+
+	for (port = 0; port < DSA_MAX_PORTS; port++) {
+		if ((1 << port) & ds->phys_port_mask)
+			bcm_sf2_port_setup(ds, port);
+		else if (dsa_is_cpu_port(ds, port))
+			bcm_sf2_imp_setup(ds, port);
+	}
+
+	return 0;
+}
+
+static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
+			       struct ethtool_wolinfo *wol)
+{
+	struct net_device *p = ds->dst[ds->index].master_netdev;
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	struct ethtool_wolinfo pwol;
+
+	/* Get the parent device WoL settings */
+	p->ethtool_ops->get_wol(p, &pwol);
+
+	/* Advertise the parent device supported settings */
+	wol->supported = pwol.supported;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+
+	if (pwol.wolopts & WAKE_MAGICSECURE)
+		memcpy(&wol->sopass, pwol.sopass, sizeof(wol->sopass));
+
+	if (priv->wol_ports_mask & (1 << port))
+		wol->wolopts = pwol.wolopts;
+	else
+		wol->wolopts = 0;
+}
+
+static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
+			      struct ethtool_wolinfo *wol)
+{
+	struct net_device *p = ds->dst[ds->index].master_netdev;
+	struct bcm_sf2_priv *priv = ds_to_priv(ds);
+	s8 cpu_port = ds->dst[ds->index].cpu_port;
+	struct ethtool_wolinfo pwol;
+
+	p->ethtool_ops->get_wol(p, &pwol);
+	if (wol->wolopts & ~pwol.supported)
+		return -EINVAL;
+
+	if (wol->wolopts)
+		priv->wol_ports_mask |= (1 << port);
+	else
+		priv->wol_ports_mask &= ~(1 << port);
+
+	/* If we have at least one port enabled, make sure the CPU port
+	 * is also enabled. If the CPU port is the last one enabled, we disable
+	 * it since this configuration does not make sense.
+	 */
+	if (priv->wol_ports_mask && priv->wol_ports_mask != (1 << cpu_port))
+		priv->wol_ports_mask |= (1 << cpu_port);
+	else
+		priv->wol_ports_mask &= ~(1 << cpu_port);
+
+	return p->ethtool_ops->set_wol(p, wol);
+}
+
 static struct dsa_switch_driver bcm_sf2_switch_driver = {
 	.tag_protocol		= DSA_TAG_PROTO_BRCM,
 	.priv_size		= sizeof(struct bcm_sf2_priv),
@@ -620,6 +759,10 @@ static struct dsa_switch_driver bcm_sf2_switch_driver = {
 	.get_sset_count		= bcm_sf2_sw_get_sset_count,
 	.adjust_link		= bcm_sf2_sw_adjust_link,
 	.fixed_link_update	= bcm_sf2_sw_fixed_link_update,
+	.suspend		= bcm_sf2_sw_suspend,
+	.resume			= bcm_sf2_sw_resume,
+	.get_wol		= bcm_sf2_sw_get_wol,
+	.set_wol		= bcm_sf2_sw_set_wol,
 };
 
 static int __init bcm_sf2_init(void)

drivers/net/dsa/bcm_sf2.h

@@ -70,6 +70,9 @@ struct bcm_sf2_priv {
 	struct bcm_sf2_hw_params	hw_params;
 
 	struct bcm_sf2_port_status	port_sts[DSA_MAX_PORTS];
+
+	/* Mask of ports enabled for Wake-on-LAN */
+	u32				wol_ports_mask;
 };
 
 struct bcm_sf2_hw_stats {

include/net/dsa.h

@@ -210,6 +210,20 @@ struct dsa_switch_driver {
 	void	(*get_ethtool_stats)(struct dsa_switch *ds,
 				     int port, uint64_t *data);
 	int	(*get_sset_count)(struct dsa_switch *ds);
+
+	/*
+	 * ethtool Wake-on-LAN
+	 */
+	void	(*get_wol)(struct dsa_switch *ds, int port,
+			   struct ethtool_wolinfo *w);
+	int	(*set_wol)(struct dsa_switch *ds, int port,
+			   struct ethtool_wolinfo *w);
+
+	/*
+	 * Suspend and resume
+	 */
+	int	(*suspend)(struct dsa_switch *ds);
+	int	(*resume)(struct dsa_switch *ds);
 };
 
 void register_switch_driver(struct dsa_switch_driver *type);

net/dsa/dsa.c

@@ -238,6 +238,49 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
 {
 }
 
+static int dsa_switch_suspend(struct dsa_switch *ds)
+{
+	int i, ret = 0;
+
+	/* Suspend slave network devices */
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		if (!(ds->phys_port_mask & (1 << i)))
+			continue;
+
+		ret = dsa_slave_suspend(ds->ports[i]);
+		if (ret)
+			return ret;
+	}
+
+	if (ds->drv->suspend)
+		ret = ds->drv->suspend(ds);
+
+	return ret;
+}
+
+static int dsa_switch_resume(struct dsa_switch *ds)
+{
+	int i, ret = 0;
+
+	if (ds->drv->resume)
+		ret = ds->drv->resume(ds);
+
+	if (ret)
+		return ret;
+
+	/* Resume slave network devices */
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		if (!(ds->phys_port_mask & (1 << i)))
+			continue;
+
+		ret = dsa_slave_resume(ds->ports[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 
 /* link polling *************************************************************/
 static void dsa_link_poll_work(struct work_struct *ugly)
@@ -650,6 +693,42 @@ static struct packet_type dsa_pack_type __read_mostly = {
 	.func	= dsa_switch_rcv,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int dsa_suspend(struct device *d)
+{
+	struct platform_device *pdev = to_platform_device(d);
+	struct dsa_switch_tree *dst = platform_get_drvdata(pdev);
+	int i, ret = 0;
+
+	for (i = 0; i < dst->pd->nr_chips; i++) {
+		struct dsa_switch *ds = dst->ds[i];
+
+		if (ds != NULL)
+			ret = dsa_switch_suspend(ds);
+	}
+
+	return ret;
+}
+
+static int dsa_resume(struct device *d)
+{
+	struct platform_device *pdev = to_platform_device(d);
+	struct dsa_switch_tree *dst = platform_get_drvdata(pdev);
+	int i, ret = 0;
+
+	for (i = 0; i < dst->pd->nr_chips; i++) {
+		struct dsa_switch *ds = dst->ds[i];
+
+		if (ds != NULL)
+			ret = dsa_switch_resume(ds);
+	}
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsa_pm_ops, dsa_suspend, dsa_resume);
+
 static const struct of_device_id dsa_of_match_table[] = {
 	{ .compatible = "brcm,bcm7445-switch-v4.0" },
 	{ .compatible = "marvell,dsa", },
@@ -665,6 +744,7 @@ static struct platform_driver dsa_driver = {
 		.name	= "dsa",
 		.owner	= THIS_MODULE,
 		.of_match_table = dsa_of_match_table,
+		.pm	= &dsa_pm_ops,
 	},
 };
 

net/dsa/dsa_priv.h

@@ -56,6 +56,8 @@ void dsa_slave_mii_bus_init(struct dsa_switch *ds);
 struct net_device *dsa_slave_create(struct dsa_switch *ds,
 				    struct device *parent,
 				    int port, char *name);
+int dsa_slave_suspend(struct net_device *slave_dev);
+int dsa_slave_resume(struct net_device *slave_dev);
 
 /* tag_dsa.c */
 extern const struct dsa_device_ops dsa_netdev_ops;

net/dsa/slave.c

@@ -301,6 +301,27 @@ static int dsa_slave_get_sset_count(struct net_device *dev, int sset)
 	return -EOPNOTSUPP;
 }
 
+static void dsa_slave_get_wol(struct net_device *dev, struct ethtool_wolinfo *w)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+
+	if (ds->drv->get_wol)
+		ds->drv->get_wol(ds, p->port, w);
+}
+
+static int dsa_slave_set_wol(struct net_device *dev, struct ethtool_wolinfo *w)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct dsa_switch *ds = p->parent;
+	int ret = -EOPNOTSUPP;
+
+	if (ds->drv->set_wol)
+		ret = ds->drv->set_wol(ds, p->port, w);
+
+	return ret;
+}
+
 static const struct ethtool_ops dsa_slave_ethtool_ops = {
 	.get_settings		= dsa_slave_get_settings,
 	.set_settings		= dsa_slave_set_settings,
@@ -310,6 +331,8 @@ static const struct ethtool_ops dsa_slave_ethtool_ops = {
 	.get_strings		= dsa_slave_get_strings,
 	.get_ethtool_stats	= dsa_slave_get_ethtool_stats,
 	.get_sset_count		= dsa_slave_get_sset_count,
+	.set_wol		= dsa_slave_set_wol,
+	.get_wol		= dsa_slave_get_wol,
 };
 
 static const struct net_device_ops dsa_slave_netdev_ops = {
@@ -412,6 +435,37 @@ static void dsa_slave_phy_setup(struct dsa_slave_priv *p,
 			p->phy->addr, p->phy->drv->name);
 }
 
+int dsa_slave_suspend(struct net_device *slave_dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(slave_dev);
+
+	netif_device_detach(slave_dev);
+
+	if (p->phy) {
+		phy_stop(p->phy);
+		p->old_pause = -1;
+		p->old_link = -1;
+		p->old_duplex = -1;
+		phy_suspend(p->phy);
+	}
+
+	return 0;
+}
+
+int dsa_slave_resume(struct net_device *slave_dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(slave_dev);
+
+	netif_device_attach(slave_dev);
+
+	if (p->phy) {
+		phy_resume(p->phy);
+		phy_start(p->phy);
+	}
+
+	return 0;
+}
+
 struct net_device *
 dsa_slave_create(struct dsa_switch *ds, struct device *parent,
 		 int port, char *name)