Commit 6209c285 authored by Jani Nikula's avatar Jani Nikula Committed by Rodrigo Vivi

drm/i915: set DP Main Stream Attribute for color range on DDI platforms

Since Haswell we have no color range indication either in the pipe or
port registers for DP. Instead, there's a separate register for setting
the DP Main Stream Attributes (MSA) directly. The MSA register
definition makes no references to colorimetry, just a vague reference to
the DP spec. The connection to the color range was lost.

Apparently we've failed to set the proper MSA bit for limited, or CEA,
range ever since the first DDI platforms. We've started setting other
MSA parameters since commit dae84799 ("drm/i915: add
intel_ddi_set_pipe_settings").

Without the crucial bit of information, the DP sink has no way of
knowing the source is actually transmitting limited range RGB, leading
to "washed out" colors. With the colorimetry information, compliant
sinks should be able to handle the limited range properly. Native
(i.e. non-LSPCON) HDMI was not affected because we do pass the color
range via AVI infoframes.

Though not the root cause, the problem was made worse for DDI platforms
with commit 55bc60db ("drm/i915: Add "Automatic" mode for the
"Broadcast RGB" property"), which selects limited range RGB
automatically based on the mode, as per the DP, HDMI and CEA specs.

After all these years, the fix boils down to flipping one bit.

[Per testing reports, this fixes DP sinks, but not the LSPCON. My
 educated guess is that the LSPCON fails to turn the CEA range MSA into
 AVI infoframes for HDMI.]
Reported-by: default avatarMichał Kopeć <mkopec12@gmail.com>
Reported-by: default avatarN. W. <nw9165-3201@yahoo.com>
Reported-by: default avatarNicholas Stommel <nicholas.stommel@gmail.com>
Reported-by: default avatarTom Yan <tom.ty89@gmail.com>
Tested-by: default avatarNicholas Stommel <nicholas.stommel@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=100023
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107476
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94921
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.9+
Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180814060001.18224-1-jani.nikula@intel.com
(cherry picked from commit dc5977da)
Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
parent 3012ea60
...@@ -9201,6 +9201,7 @@ enum skl_power_gate { ...@@ -9201,6 +9201,7 @@ enum skl_power_gate {
#define TRANS_MSA_10_BPC (2 << 5) #define TRANS_MSA_10_BPC (2 << 5)
#define TRANS_MSA_12_BPC (3 << 5) #define TRANS_MSA_12_BPC (3 << 5)
#define TRANS_MSA_16_BPC (4 << 5) #define TRANS_MSA_16_BPC (4 << 5)
#define TRANS_MSA_CEA_RANGE (1 << 3)
/* LCPLL Control */ /* LCPLL Control */
#define LCPLL_CTL _MMIO(0x130040) #define LCPLL_CTL _MMIO(0x130040)
......
...@@ -1685,6 +1685,10 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state) ...@@ -1685,6 +1685,10 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state)
WARN_ON(transcoder_is_dsi(cpu_transcoder)); WARN_ON(transcoder_is_dsi(cpu_transcoder));
temp = TRANS_MSA_SYNC_CLK; temp = TRANS_MSA_SYNC_CLK;
if (crtc_state->limited_color_range)
temp |= TRANS_MSA_CEA_RANGE;
switch (crtc_state->pipe_bpp) { switch (crtc_state->pipe_bpp) {
case 18: case 18:
temp |= TRANS_MSA_6_BPC; temp |= TRANS_MSA_6_BPC;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment