Commit 626ceee3 authored by Mark Brown's avatar Mark Brown

Merge series "New DSA driver for VSC9953 Seville switch" from Vladimir Oltean <olteanv@gmail.com>:

Looking at the Felix and Ocelot drivers, Maxim asked if it would be
possible to use them as a base for a new driver for the switch inside
NXP T1040. Turns out, it is! The result is a driver eerily similar to
Felix.

The biggest challenge seems to be getting register read/write API
generic enough to cover such wild bitfield variations between hardware
generations. There is a patch on the regmap core which I would like to
get in through the networking subsystem, if possible (and if Mark is
ok), since it's a trivial addition.

Maxim Kochetkov (4):
  soc/mscc: ocelot: add MII registers description
  net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield
  net: mscc: ocelot: extend watermark encoding function
  net: dsa: ocelot: introduce driver for Seville VSC9953 switch

Vladimir Oltean (7):
  regmap: add helper for per-port regfield initialization
  net: mscc: ocelot: unexport ocelot_probe_port
  net: mscc: ocelot: convert port registers to regmap
  net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to
    regfields
  net: dsa: ocelot: create a template for the DSA tags on xmit
  net: mscc: ocelot: split writes to pause frame enable bit and to
    thresholds
  net: mscc: ocelot: disable flow control on NPI interface

 drivers/net/dsa/ocelot/Kconfig           |   12 +
 drivers/net/dsa/ocelot/Makefile          |    6 +
 drivers/net/dsa/ocelot/felix.c           |   49 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c   |   72 +-
 drivers/net/dsa/ocelot/seville.c         |  742 +++++++++++++++
 drivers/net/dsa/ocelot/seville.h         |   50 +
 drivers/net/dsa/ocelot/seville_vsc9953.c | 1064 ++++++++++++++++++++++
 drivers/net/ethernet/mscc/ocelot.c       |   87 +-
 drivers/net/ethernet/mscc/ocelot.h       |    9 +-
 drivers/net/ethernet/mscc/ocelot_board.c |   21 +-
 drivers/net/ethernet/mscc/ocelot_io.c    |   18 +-
 drivers/net/ethernet/mscc/ocelot_regs.c  |   57 ++
 include/linux/regmap.h                   |    8 +
 include/soc/mscc/ocelot.h                |   68 +-
 include/soc/mscc/ocelot_dev.h            |   78 --
 include/soc/mscc/ocelot_qsys.h           |   13 -
 include/soc/mscc/ocelot_sys.h            |   23 -
 net/dsa/tag_ocelot.c                     |   21 +-
 18 files changed, 2196 insertions(+), 202 deletions(-)
 create mode 100644 drivers/net/dsa/ocelot/seville.c
 create mode 100644 drivers/net/dsa/ocelot/seville.h
 create mode 100644 drivers/net/dsa/ocelot/seville_vsc9953.c

base-commit: 8f3d9f35

--
2.25.1
parents 82f25bd7 8baebfc2
......@@ -1112,6 +1112,14 @@ struct reg_field {
.msb = _msb, \
}
#define REG_FIELD_ID(_reg, _lsb, _msb, _size, _offset) { \
.reg = _reg, \
.lsb = _lsb, \
.msb = _msb, \
.id_size = _size, \
.id_offset = _offset, \
}
struct regmap_field *regmap_field_alloc(struct regmap *regmap,
struct reg_field reg_field);
void regmap_field_free(struct regmap_field *field);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment