Commit 6327a31a authored by Lokesh Vutla's avatar Lokesh Vutla Committed by Greg Kroah-Hartman

ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property

commit 2e18f5a1 upstream.

Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.
Acked-by: default avatarRoger Quadros <rogerq@ti.com>
Tested-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
Signed-off-by: default avatarDave Gerlach <d-gerlach@ti.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 958df498
......@@ -23,6 +23,7 @@ Optional properties:
during suspend.
- ti,no-reset-on-init: When present, the module should not be reset at init
- ti,no-idle-on-init: When present, the module should not be idled at init
- ti,no-idle: When present, the module is never allowed to idle.
Example:
......
......@@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh)
*/
static int _idle(struct omap_hwmod *oh)
{
if (oh->flags & HWMOD_NO_IDLE) {
oh->_int_flags |= _HWMOD_SKIP_ENABLE;
return 0;
}
pr_debug("omap_hwmod: %s: idling\n", oh->name);
if (oh->_state != _HWMOD_STATE_ENABLED) {
......@@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data)
oh->flags |= HWMOD_INIT_NO_RESET;
if (of_find_property(np, "ti,no-idle-on-init", NULL))
oh->flags |= HWMOD_INIT_NO_IDLE;
if (of_find_property(np, "ti,no-idle", NULL))
oh->flags |= HWMOD_NO_IDLE;
}
oh->_state = _HWMOD_STATE_INITIALIZED;
......@@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh)
* XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
* it should be set by the core code as a runtime flag during startup
*/
if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) &&
(postsetup_state == _HWMOD_STATE_IDLE)) {
oh->_int_flags |= _HWMOD_SKIP_ENABLE;
postsetup_state = _HWMOD_STATE_ENABLED;
......
......@@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm {
* or idled.
* HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
* operate and they need to be handled at the same time as the main_clk.
* HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
* IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
......@@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
#define HWMOD_NO_IDLE (1 << 15)
/*
* omap_hwmod._int_flags definitions
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment