Commit 641912f4 authored by Prarit Bhargava's avatar Prarit Bhargava Committed by Wim Van Sebroeck

watchdog: iTCO_wdt: Cleanup warning messages

The current iTCO_wdt driver warnings are confusing.  Currently when the device
driver returns an error the console contains:

iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected

After the patch,

iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, device disabled by hardware/BIOS

Clean this up and use the word "device" to describe the device.
Signed-off-by: default avatarPrarit Bhargava <prarit@redhat.com>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent cad0df37
......@@ -377,7 +377,7 @@ static char expect_release;
static struct { /* this is private data for the iTCO_wdt device */
/* TCO version/generation */
unsigned int iTCO_version;
/* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
/* The device's ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
unsigned long ACPIBASE;
/* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/
unsigned long __iomem *gcs;
......@@ -470,7 +470,7 @@ static int iTCO_wdt_start(void)
if (iTCO_wdt_unset_NO_REBOOT_bit()) {
spin_unlock(&iTCO_wdt_private.io_lock);
printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
"reboot disabled by hardware\n");
"reboot disabled by hardware/BIOS\n");
return -EIO;
}
......@@ -784,7 +784,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
base_address &= 0x0000ff80;
if (base_address == 0x00000000) {
/* Something's wrong here, ACPIBASE has to be set */
printk(KERN_ERR PFX "failed to get TCOBASE address\n");
printk(KERN_ERR PFX "failed to get TCOBASE address, "
"device disabled by hardware/BIOS\n");
pci_dev_put(pdev);
return -ENODEV;
}
......@@ -800,7 +801,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
if (iTCO_wdt_private.iTCO_version == 2) {
pci_read_config_dword(pdev, 0xf0, &base_address);
if ((base_address & 1) == 0) {
printk(KERN_ERR PFX "RCBA is disabled by hardware\n");
printk(KERN_ERR PFX "RCBA is disabled by hardware"
"/BIOS, device disabled\n");
ret = -ENODEV;
goto out;
}
......@@ -811,7 +813,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
/* Check chipset's NO_REBOOT bit */
if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
printk(KERN_INFO PFX "unable to reset NO_REBOOT flag, "
"platform may have disabled it\n");
"device disabled by hardware/BIOS\n");
ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
goto out_unmap;
}
......@@ -822,7 +824,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
printk(KERN_ERR PFX
"I/O address 0x%04lx already in use\n", SMI_EN);
"I/O address 0x%04lx already in use, "
"device disabled\n", SMI_EN);
ret = -EIO;
goto out_unmap;
}
......@@ -834,8 +837,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
/* The TCO I/O registers reside in a 32-byte range pointed to
by the TCOBASE value */
if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) {
printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
TCOBASE);
printk(KERN_ERR PFX "I/O address 0x%04lx already in use "
"device disabled\n", TCOBASE);
ret = -EIO;
goto unreg_smi_en;
}
......@@ -924,7 +927,7 @@ static int __devinit iTCO_wdt_probe(struct platform_device *dev)
}
if (!found)
printk(KERN_INFO PFX "No card detected\n");
printk(KERN_INFO PFX "No device detected.\n");
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment