Commit 641dfe8b authored by Shawn Guo's avatar Shawn Guo

ARM: imx: move EHCI platform defines out of platform_data header

The platform_data header usb-ehci-mxc.h has a lot of stuff used by only
IMX platform code.  They shouldn't be really in this header but a IMX
platform local header.  Create ehci.h and move these stuff into it.
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
parent e1b24377
......@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
......
......@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
......
......@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
......
......@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
......
......@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define MXC_OTG_OFFSET 0
......
#ifndef __MACH_IMX_EHCI_H
#define __MACH_IMX_EHCI_H
/* values for portsc field */
#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
#define MXC_EHCI_FORCE_FS (1 << 24)
#define MXC_EHCI_UTMI_8BIT (0 << 28)
#define MXC_EHCI_UTMI_16BIT (1 << 28)
#define MXC_EHCI_SERIAL (1 << 29)
#define MXC_EHCI_MODE_UTMI (0 << 30)
#define MXC_EHCI_MODE_PHILIPS (1 << 30)
#define MXC_EHCI_MODE_ULPI (2 << 30)
#define MXC_EHCI_MODE_SERIAL (3 << 30)
/* values for flags field */
#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
#define MXC_EHCI_INTERFACE_MASK (0xf)
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
#define MXC_EHCI_TTL_ENABLED (1 << 8)
#define MXC_EHCI_INTERNAL_PHY (1 << 9)
#define MXC_EHCI_IPPUE_DOWN (1 << 10)
#define MXC_EHCI_IPPUE_UP (1 << 11)
#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
#define MXC_USBH2CTRL_OFFSET 0x14
#define MX5_USBOTHER_REGS_OFFSET 0x800
/* USB_PHY_CTRL_FUNC2*/
#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
int mx51_initialize_usb_hw(int port, unsigned int flags);
int mx25_initialize_usb_hw(int port, unsigned int flags);
int mx31_initialize_usb_hw(int port, unsigned int flags);
int mx35_initialize_usb_hw(int port, unsigned int flags);
int mx27_initialize_usb_hw(int port, unsigned int flags);
#endif /* __MACH_IMX_EHCI_H */
......@@ -50,6 +50,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
......@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx27.h"
......
......@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx35.h"
#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx35.h"
......
......@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx25.h"
#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx25.h"
......
......@@ -43,6 +43,7 @@
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
......
......@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx25.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
......
......@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
......
......@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
......@@ -45,6 +45,7 @@
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
......@@ -42,6 +42,7 @@
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
......@@ -47,6 +47,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
......@@ -50,6 +50,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
......
......@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
......
......@@ -45,6 +45,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "pcm037.h"
......
......@@ -36,6 +36,7 @@
#include "board-pcm038.h"
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
......
......@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx35.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "ulpi.h"
......
......@@ -34,6 +34,7 @@
#include "common.h"
#include "devices-imx35.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
......
......@@ -24,6 +24,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
......@@ -28,6 +28,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
......@@ -28,6 +28,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
......
#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
/* values for portsc field */
#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
#define MXC_EHCI_FORCE_FS (1 << 24)
#define MXC_EHCI_UTMI_8BIT (0 << 28)
#define MXC_EHCI_UTMI_16BIT (1 << 28)
#define MXC_EHCI_SERIAL (1 << 29)
#define MXC_EHCI_MODE_UTMI (0 << 30)
#define MXC_EHCI_MODE_PHILIPS (1 << 30)
#define MXC_EHCI_MODE_ULPI (2 << 30)
#define MXC_EHCI_MODE_SERIAL (3 << 30)
/* values for flags field */
#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
#define MXC_EHCI_INTERFACE_MASK (0xf)
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
#define MXC_EHCI_TTL_ENABLED (1 << 8)
#define MXC_EHCI_INTERNAL_PHY (1 << 9)
#define MXC_EHCI_IPPUE_DOWN (1 << 10)
#define MXC_EHCI_IPPUE_UP (1 << 11)
#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
#define MXC_USBH2CTRL_OFFSET 0x14
#define MX5_USBOTHER_REGS_OFFSET 0x800
/* USB_PHY_CTRL_FUNC2*/
#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
struct mxc_usbh_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
......@@ -49,11 +9,5 @@ struct mxc_usbh_platform_data {
struct usb_phy *otg;
};
int mx51_initialize_usb_hw(int port, unsigned int flags);
int mx25_initialize_usb_hw(int port, unsigned int flags);
int mx31_initialize_usb_hw(int port, unsigned int flags);
int mx35_initialize_usb_hw(int port, unsigned int flags);
int mx27_initialize_usb_hw(int port, unsigned int flags);
#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment