[PATCH] ppc32: Add support for handling PCI interrupts on MPC834x PCI expansion card

The MPC8349 PIBs system has a expansion board with 6 PCI slots.  We needed
to update the IDSEL interrupt mapping for it to work properly.  However,
only PCI1 is supported as the first revision of this expansion board
doesn't function properly for PCI2.  For the time being we have zero'd out
the entries for the IDSELs related to PCI2.  When a functioning expansion
board exists we can fix the table.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/platforms/83xx/mpc834x_sys.c

@@ -73,12 +73,19 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 	     *       A      B      C      D
 	     */
 	{
-		{PIRQA, PIRQB,  PIRQC,  PIRQD}, /* idsel 0x11 */
-		{PIRQC, PIRQD,  PIRQA,  PIRQB}, /* idsel 0x12 */
-		{PIRQD, PIRQA,  PIRQB,  PIRQC}  /* idsel 0x13 */
+		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x11 */
+		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x12 */
+		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x13 */
+		{0, 0, 0, 0},
+		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x15 */
+		{PIRQD, PIRQA, PIRQB, PIRQC},	/* idsel 0x16 */
+		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x17 */
+		{PIRQB, PIRQC, PIRQD, PIRQA},	/* idsel 0x18 */
+		{0, 0, 0, 0},			/* idsel 0x19 */
+		{0, 0, 0, 0},			/* idsel 0x20 */
 	};
 
-	const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4;
+	const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4;
 	return PCI_IRQ_TABLE_LOOKUP;
 }