e1000e: checkpatch error - open braces

ERROR: that open brace { should be on the previous line
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/e1000e/es2lan.c

@@ -100,8 +100,8 @@
  * with a lower bound at "index" and the upper bound at
  * "index + 5".
  */
-static const u16 e1000_gg82563_cable_length_table[] =
-	 { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+static const u16 e1000_gg82563_cable_length_table[] = {
+	 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
 #define GG82563_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_gg82563_cable_length_table)
 

drivers/net/e1000e/ethtool.c

@@ -753,8 +753,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
 			     int reg, int offset, u32 mask, u32 write)
 {
 	u32 pat, val;
-	static const u32 test[] =
-		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+	static const u32 test[] = {
+		0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
 	for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
 		E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
 				      (test[pat] & write));

drivers/net/e1000e/phy.c

@@ -42,20 +42,20 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
                                           u16 *data, bool read);
 
 /* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] =
-	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+static const u16 e1000_m88_cable_length_table[] = {
+	0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
 #define M88E1000_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_m88_cable_length_table)
 
-static const u16 e1000_igp_2_cable_length_table[] =
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
-	  6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
-	  26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
-	  44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
-	  66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
-	  87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
-	  100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
-	  124};
+static const u16 e1000_igp_2_cable_length_table[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+	6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+	26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+	44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+	66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+	87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+	100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+	124};
 #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_igp_2_cable_length_table)