ARM: pxa: introduce addr-map.h for large bus addresses and ranges

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

arch/arm/mach-pxa/include/mach/addr-map.h

+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/*
+ * Chip Selects
+ */
+#define PXA_CS0_PHYS		0x00000000
+#define PXA_CS1_PHYS		0x04000000
+#define PXA_CS2_PHYS		0x08000000
+#define PXA_CS3_PHYS		0x0C000000
+#define PXA_CS4_PHYS		0x10000000
+#define PXA_CS5_PHYS		0x14000000
+
+#define PXA300_CS0_PHYS		0x00000000	/* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS		0x30000000	/* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS		0x10000000
+#define PXA3xx_CS3_PHYS		0x14000000
+
+/*
+ * Peripheral Bus
+ */
+#define PERIPH_PHYS		0x40000000
+#define PERIPH_VIRT		0xf2000000
+#define PERIPH_SIZE		0x02000000
+
+/*
+ * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
+ */
+#define PXA2XX_SMEMC_PHYS	0x48000000
+#define PXA3XX_SMEMC_PHYS	0x4a000000
+#define SMEMC_VIRT		0xf6000000
+#define SMEMC_SIZE		0x00100000
+
+/*
+ * Dynamic Memory Controller (only on PXA3xx)
+ */
+#define DMEMC_PHYS		0x48100000
+#define DMEMC_VIRT		0xf6100000
+#define DMEMC_SIZE		0x00100000
+
+/*
+ * Internal Memory Controller (PXA27x and later)
+ */
+#define IMEMC_PHYS		0x58000000
+#define IMEMC_VIRT		0xfe000000
+#define IMEMC_SIZE		0x00100000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */

arch/arm/mach-pxa/include/mach/hardware.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
+#include <mach/addr-map.h>
+
 /*
  * Workarounds for at least 2 errata so far require this.
  * The mapping is set in mach-pxa/generic.c.

arch/arm/mach-pxa/include/mach/pxa2xx-regs.h

@@ -16,17 +16,6 @@
 
 #include <mach/hardware.h>
 
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS	0x00000000
-#define PXA_CS1_PHYS	0x04000000
-#define PXA_CS2_PHYS	0x08000000
-#define PXA_CS3_PHYS	0x0C000000
-#define PXA_CS4_PHYS	0x10000000
-#define PXA_CS5_PHYS	0x14000000
-
 /*
  * Memory controller
  */

arch/arm/mach-pxa/include/mach/pxa3xx-regs.h

@@ -15,15 +15,6 @@
 
 #include <mach/hardware.h>
 
-/*
- * Static Chip Selects
- */
-
-#define PXA300_CS0_PHYS		(0x00000000)	/* PXA300/PXA310 _only_ */
-#define PXA300_CS1_PHYS		(0x30000000)	/* PXA300/PXA310 _only_ */
-#define PXA3xx_CS2_PHYS		(0x10000000)
-#define PXA3xx_CS3_PHYS		(0x14000000)
-
 /*
  * Oscillator Configuration Register (OSCC)
  */