Commit 6507de6d authored by Prameela Rani Garnepudi's avatar Prameela Rani Garnepudi Committed by Kalle Valo

rsi: separate function for management packet descriptor

Management descriptor preparation is move to a separate function
as it will be called from a different context in upcoming patches.
Signed-off-by: default avatarPrameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent de2dea16
......@@ -25,6 +25,89 @@ static struct ta_metadata metadata_flash_content[] = {
{"rsi/rs9113_wlan_qspi.rps", 0x00010000},
};
/*This function prepares descriptor for given management packet*/
static int rsi_prepare_mgmt_desc(struct rsi_common *common, struct sk_buff *skb)
{
struct rsi_hw *adapter = common->priv;
struct ieee80211_hdr *wh = NULL;
struct ieee80211_tx_info *info;
struct ieee80211_conf *conf = &adapter->hw->conf;
struct ieee80211_vif *vif = NULL;
struct rsi_mgmt_desc *mgmt_desc;
struct skb_info *tx_params;
struct ieee80211_bss_conf *bss = NULL;
struct xtended_desc *xtend_desc = NULL;
u8 header_size;
u32 dword_align_bytes = 0;
info = IEEE80211_SKB_CB(skb);
tx_params = (struct skb_info *)info->driver_data;
/* Update header size */
header_size = FRAME_DESC_SZ + sizeof(struct xtended_desc);
if (header_size > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE,
"%s: Failed to add extended descriptor\n",
__func__);
return -ENOSPC;
}
skb_push(skb, header_size);
dword_align_bytes = ((unsigned long)skb->data & 0x3f);
if (dword_align_bytes > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE,
"%s: Failed to add dword align\n", __func__);
return -ENOSPC;
}
skb_push(skb, dword_align_bytes);
header_size += dword_align_bytes;
tx_params->internal_hdr_size = header_size;
memset(&skb->data[0], 0, header_size);
bss = &info->control.vif->bss_conf;
wh = (struct ieee80211_hdr *)&skb->data[header_size];
vif = adapter->vifs[0];
mgmt_desc = (struct rsi_mgmt_desc *)skb->data;
xtend_desc = (struct xtended_desc *)&skb->data[FRAME_DESC_SZ];
if (skb->len > MAX_MGMT_PKT_SIZE) {
rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
return -EINVAL;
}
rsi_set_len_qno(&mgmt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
RSI_WIFI_MGMT_Q);
mgmt_desc->frame_type = TX_DOT11_MGMT;
mgmt_desc->header_len = MIN_802_11_HDR_LEN;
mgmt_desc->xtend_desc_size = header_size - FRAME_DESC_SZ;
mgmt_desc->frame_info |= cpu_to_le16(RATE_INFO_ENABLE);
if (is_broadcast_ether_addr(wh->addr1))
mgmt_desc->frame_info |= cpu_to_le16(RSI_BROADCAST_PKT);
mgmt_desc->seq_ctrl =
cpu_to_le16(IEEE80211_SEQ_TO_SN(le16_to_cpu(wh->seq_ctrl)));
if (common->band == NL80211_BAND_2GHZ)
mgmt_desc->rate_info = RSI_RATE_1;
else
mgmt_desc->rate_info = RSI_RATE_6;
if (conf_is_ht40(conf))
mgmt_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE);
if (ieee80211_is_probe_req(wh->frame_control)) {
if (!bss->assoc) {
rsi_dbg(INFO_ZONE,
"%s: blocking mgmt queue\n", __func__);
mgmt_desc->misc_flags = RSI_DESC_REQUIRE_CFM_TO_HOST;
xtend_desc->confirm_frame_type = PROBEREQ_CONFIRM;
common->mgmt_q_block = true;
rsi_dbg(INFO_ZONE, "Mgmt queue blocked\n");
}
}
return 0;
}
/**
* rsi_send_data_pkt() - This function sends the recieved data packet from
* driver to device.
......@@ -133,16 +216,10 @@ int rsi_send_mgmt_pkt(struct rsi_common *common,
struct sk_buff *skb)
{
struct rsi_hw *adapter = common->priv;
struct ieee80211_hdr *wh;
struct ieee80211_tx_info *info;
struct ieee80211_bss_conf *bss;
struct ieee80211_hw *hw = adapter->hw;
struct ieee80211_conf *conf = &hw->conf;
struct rsi_mgmt_desc *mgmt_desc;
struct skb_info *tx_params;
int status = -E2BIG;
u8 extnd_size;
u8 vap_id = 0;
info = IEEE80211_SKB_CB(skb);
tx_params = (struct skb_info *)info->driver_data;
......@@ -168,51 +245,12 @@ int rsi_send_mgmt_pkt(struct rsi_common *common,
return status;
}
bss = &info->control.vif->bss_conf;
wh = (struct ieee80211_hdr *)&skb->data[0];
if (FRAME_DESC_SZ > skb_headroom(skb))
goto err;
skb_push(skb, FRAME_DESC_SZ);
memset(skb->data, 0, FRAME_DESC_SZ);
mgmt_desc = (struct rsi_mgmt_desc *)skb->data;
if (skb->len > MAX_MGMT_PKT_SIZE) {
rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
goto err;
}
rsi_set_len_qno(&mgmt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
RSI_WIFI_MGMT_Q);
mgmt_desc->frame_type = TX_DOT11_MGMT;
mgmt_desc->header_len = MIN_802_11_HDR_LEN;
mgmt_desc->info_cap |= cpu_to_le16(RATE_INFO_ENABLE);
mgmt_desc->seq_ctrl = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
if (wh->addr1[0] & BIT(0))
mgmt_desc->info_cap |= cpu_to_le16(RSI_BROADCAST_PKT);
if (common->band == NL80211_BAND_2GHZ)
mgmt_desc->rate_info = RSI_11B_MODE;
else
mgmt_desc->rate_info = (RSI_RATE_6 & 0x0f) | RSI_11G_MODE;
if (conf_is_ht40(conf)) {
mgmt_desc->rate_info = 0xB | RSI_11G_MODE;
mgmt_desc->bbp_info = BBP_INFO_40MHZ;
}
/* Indicate to firmware to give cfm */
if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
mgmt_desc->misc_flags |= BIT(2);
mgmt_desc->cfm_frame_type = PROBEREQ_CONFIRM;
common->mgmt_q_block = true;
}
mgmt_desc->vap_info = vap_id << 8;
rsi_prepare_mgmt_desc(common, skb);
status = adapter->host_intf_ops->write_pkt(common->priv,
(u8 *)mgmt_desc, skb->len);
(u8 *)skb->data, skb->len);
if (status)
rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
......
......@@ -118,14 +118,14 @@ struct rsi_mgmt_desc {
__le16 len_qno;
u8 frame_type;
u8 misc_flags;
u8 reserved1;
u8 xtend_desc_size;
u8 header_len;
__le16 info_cap;
__le16 frame_info;
u8 rate_info;
u8 reserved2;
u16 bbp_info;
u8 reserved1;
__le16 bbp_info;
__le16 seq_ctrl;
u8 cfm_frame_type;
u8 reserved2;
u8 vap_info;
} __packed;
......
......@@ -105,6 +105,7 @@ struct skb_info {
u16 channel;
s8 tid;
s8 sta_id;
u8 internal_hdr_size;
};
enum edca_queue {
......@@ -158,6 +159,12 @@ struct cqm_info {
u32 rssi_hyst;
};
struct xtended_desc {
u8 confirm_frame_type;
u8 retry_cnt;
u16 reserved;
};
struct rsi_hw;
struct rsi_common {
......
......@@ -63,6 +63,7 @@
#define RF_RESET_ENABLE BIT(3)
#define RATE_INFO_ENABLE BIT(0)
#define RSI_BROADCAST_PKT BIT(9)
#define RSI_DESC_REQUIRE_CFM_TO_HOST BIT(2)
#define UPPER_20_ENABLE (0x2 << 12)
#define LOWER_20_ENABLE (0x4 << 12)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment