Commit 658a731c authored by Maxime Ripard's avatar Maxime Ripard

drm/vc4: crtc: Add BCM2711 pixelvalves

The BCM2711 has 5 pixelvalves, so now that our driver is ready, let's add
support for them.
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Tested-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
Tested-by: default avatarHoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: default avatarEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/2553ec9ece0d8a0e5299ff74ed932a38703c5db9.1599120059.git-series.maxime@cerno.tech
parent 2ed19897
......@@ -208,6 +208,7 @@ void vc4_crtc_destroy(struct drm_crtc *crtc)
static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
{
const struct vc4_crtc_data *crtc_data = vc4_crtc_to_vc4_crtc_data(vc4_crtc);
const struct vc4_pv_data *pv_data = vc4_crtc_to_vc4_pv_data(vc4_crtc);
u32 fifo_len_bytes = pv_data->fifo_depth;
......@@ -230,6 +231,13 @@ static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
case PV_CONTROL_FORMAT_24:
case PV_CONTROL_FORMAT_DSIV_24:
default:
/*
* For some reason, the pixelvalve4 doesn't work with
* the usual formula and will only work with 32.
*/
if (crtc_data->hvs_output == 5)
return 32;
return fifo_len_bytes - 3 * HVS_FIFO_LATENCY_PIX;
}
}
......@@ -238,9 +246,13 @@ static u32 vc4_crtc_get_fifo_full_level_bits(struct vc4_crtc *vc4_crtc,
u32 format)
{
u32 level = vc4_get_fifo_full_level(vc4_crtc, format);
u32 ret = 0;
ret |= VC4_SET_FIELD((level >> 6),
PV5_CONTROL_FIFO_LEVEL_HIGH);
return VC4_SET_FIELD(level & 0x3f,
PV_CONTROL_FIFO_LEVEL);
return ret | VC4_SET_FIELD(level & 0x3f,
PV_CONTROL_FIFO_LEVEL);
}
/*
......@@ -278,6 +290,8 @@ static void vc4_crtc_pixelvalve_reset(struct drm_crtc *crtc)
static void vc4_crtc_config_pv(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc);
struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder);
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
......@@ -358,6 +372,11 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc)
if (is_dsi)
CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep);
if (vc4->hvs->hvs5)
CRTC_WRITE(PV_MUX_CFG,
VC4_SET_FIELD(PV_MUX_CFG_RGB_PIXEL_MUX_MODE_NO_SWAP,
PV_MUX_CFG_RGB_PIXEL_MUX_MODE));
CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR |
vc4_crtc_get_fifo_full_level_bits(vc4_crtc, format) |
VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
......@@ -907,10 +926,82 @@ static const struct vc4_pv_data bcm2835_pv2_data = {
},
};
static const struct vc4_pv_data bcm2711_pv0_data = {
.base = {
.hvs_available_channels = BIT(0),
.hvs_output = 0,
},
.debugfs_name = "crtc0_regs",
.fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[0] = VC4_ENCODER_TYPE_DSI0,
[1] = VC4_ENCODER_TYPE_DPI,
},
};
static const struct vc4_pv_data bcm2711_pv1_data = {
.base = {
.hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
.hvs_output = 3,
},
.debugfs_name = "crtc1_regs",
.fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[0] = VC4_ENCODER_TYPE_DSI1,
[1] = VC4_ENCODER_TYPE_SMI,
},
};
static const struct vc4_pv_data bcm2711_pv2_data = {
.base = {
.hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
.hvs_output = 4,
},
.debugfs_name = "crtc2_regs",
.fifo_depth = 256,
.pixels_per_clock = 2,
.encoder_types = {
[0] = VC4_ENCODER_TYPE_HDMI0,
},
};
static const struct vc4_pv_data bcm2711_pv3_data = {
.base = {
.hvs_available_channels = BIT(1),
.hvs_output = 1,
},
.debugfs_name = "crtc3_regs",
.fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[0] = VC4_ENCODER_TYPE_VEC,
},
};
static const struct vc4_pv_data bcm2711_pv4_data = {
.base = {
.hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
.hvs_output = 5,
},
.debugfs_name = "crtc4_regs",
.fifo_depth = 64,
.pixels_per_clock = 2,
.encoder_types = {
[0] = VC4_ENCODER_TYPE_HDMI1,
},
};
static const struct of_device_id vc4_crtc_dt_match[] = {
{ .compatible = "brcm,bcm2835-pixelvalve0", .data = &bcm2835_pv0_data },
{ .compatible = "brcm,bcm2835-pixelvalve1", .data = &bcm2835_pv1_data },
{ .compatible = "brcm,bcm2835-pixelvalve2", .data = &bcm2835_pv2_data },
{ .compatible = "brcm,bcm2711-pixelvalve0", .data = &bcm2711_pv0_data },
{ .compatible = "brcm,bcm2711-pixelvalve1", .data = &bcm2711_pv1_data },
{ .compatible = "brcm,bcm2711-pixelvalve2", .data = &bcm2711_pv2_data },
{ .compatible = "brcm,bcm2711-pixelvalve3", .data = &bcm2711_pv3_data },
{ .compatible = "brcm,bcm2711-pixelvalve4", .data = &bcm2711_pv4_data },
{}
};
......
......@@ -129,6 +129,8 @@
#define V3D_ERRSTAT 0x00f20
#define PV_CONTROL 0x00
# define PV5_CONTROL_FIFO_LEVEL_HIGH_MASK VC4_MASK(26, 25)
# define PV5_CONTROL_FIFO_LEVEL_HIGH_SHIFT 25
# define PV_CONTROL_FORMAT_MASK VC4_MASK(23, 21)
# define PV_CONTROL_FORMAT_SHIFT 21
# define PV_CONTROL_FORMAT_24 0
......@@ -208,6 +210,11 @@
#define PV_HACT_ACT 0x30
#define PV_MUX_CFG 0x34
# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_MASK VC4_MASK(5, 2)
# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_SHIFT 2
# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_NO_SWAP 8
#define SCALER_CHANNELS_COUNT 3
#define SCALER_DISPCTRL 0x00000000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment