Merge tag 'arc-5.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
 "A few minor fixes for ARC.

   - regression in memset if line size !64

   - avoid panic if PAE and IOC"

* tag 'arc-5.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: memset: fix build with L1_CACHE_SHIFT != 6
  ARC: [hsdk] Make it easier to add PAE40 region to DTB
  ARC: PAE40: don't panic and instead turn off hw ioc

arch/arc/boot/dts/hsdk.dts

@@ -18,8 +18,8 @@ / {
 	model = "snps,hsdk";
 	compatible = "snps,hsdk";
 
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	chosen {
 		bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
@@ -105,7 +105,7 @@ soc {
 		#size-cells = <1>;
 		interrupt-parent = <&idu_intc>;
 
-		ranges = <0x00000000 0xf0000000 0x10000000>;
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
 
 		cgu_rst: reset-controller@8a0 {
 			compatible = "snps,hsdk-reset";
@@ -269,9 +269,10 @@ dmac: dmac@80000 {
 	};
 
 	memory@80000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>;  /* 1 GiB */
+		reg = <0x0 0x80000000 0x0 0x40000000>;  /* 1 GB lowmem */
+		/*     0x1 0x00000000 0x0 0x40000000>;     1 GB highmem */
 	};
 };

arch/arc/lib/memset-archs.S

@@ -30,10 +30,10 @@
 
 #else
 
-.macro PREALLOC_INSTR
+.macro PREALLOC_INSTR	reg, off
 .endm
 
-.macro PREFETCHW_INSTR
+.macro PREFETCHW_INSTR	reg, off
 .endm
 
 #endif

arch/arc/mm/cache.c

@@ -113,10 +113,24 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 	}
 
 	READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
-	if (cbcr.c)
+	if (cbcr.c) {
 		ioc_exists = 1;
-	else
+
+		/*
+		 * As for today we don't support both IOC and ZONE_HIGHMEM enabled
+		 * simultaneously. This happens because as of today IOC aperture covers
+		 * only ZONE_NORMAL (low mem) and any dma transactions outside this
+		 * region won't be HW coherent.
+		 * If we want to use both IOC and ZONE_HIGHMEM we can use
+		 * bounce_buffer to handle dma transactions to HIGHMEM.
+		 * Also it is possible to modify dma_direct cache ops or increase IOC
+		 * aperture size if we are planning to use HIGHMEM without PAE.
+		 */
+		if (IS_ENABLED(CONFIG_HIGHMEM) || is_pae40_enabled())
+			ioc_enable = 0;
+	} else {
 		ioc_enable = 0;
+	}
 
 	/* HS 2.0 didn't have AUX_VOL */
 	if (cpuinfo_arc700[cpu].core.family > 0x51) {
@@ -1158,19 +1172,6 @@ noinline void __init arc_ioc_setup(void)
 	if (!ioc_enable)
 		return;
 
-	/*
-	 * As for today we don't support both IOC and ZONE_HIGHMEM enabled
-	 * simultaneously. This happens because as of today IOC aperture covers
-	 * only ZONE_NORMAL (low mem) and any dma transactions outside this
-	 * region won't be HW coherent.
-	 * If we want to use both IOC and ZONE_HIGHMEM we can use
-	 * bounce_buffer to handle dma transactions to HIGHMEM.
-	 * Also it is possible to modify dma_direct cache ops or increase IOC
-	 * aperture size if we are planning to use HIGHMEM without PAE.
-	 */
-	if (IS_ENABLED(CONFIG_HIGHMEM))
-		panic("IOC and HIGHMEM can't be used simultaneously");
-
 	/* Flush + invalidate + disable L1 dcache */
 	__dc_disable();